Gallery Flash w / charger

Similar Questions

• Laptop has 'charge battery' led flashing with charger connected, but does not turn

  I am with the following problem:

  (1) my laptop won't turn. Even when it is connected to the charger. I tested 3 different Chargers work.

  (2) sometimes the light which indicates "charger plugged" does not illuminate. And when it turns on, the "battery charge" stops flashing. In this case, when I try to power on my laptop, it starts to launch upward, but in a few seconds, he turned down.

  It's a DV4-2160us.

  What could happen and what could I do?

  I have the same problem, I have a solution , however: the order of output power: first plug in the socket and then into the laptop, works fine for me if I have no batery, if I, it dose n t of material order, it could be useful

• Satellite 1800-100: battery light is still orange flashing, not charging

  Hello
  I have a S1800 Satellite laptop series and I used it for a long time. But yesterday, I'm very disappointed by a strange event. Now I have no solution, please help...

  Situation: While my laptop was working in battery mode (no air-con plugged), I was copying some files from my HARD drive, then suddenly portable inside out, I thought it happened because the accusation was over and I plugged adapter to load as usual, but NO charge!

  Battery light FLASHES with the orange color and not charging, when the AC adapter is connected, the laptop works normal without error but if I unplug the AC adapter, the laptop turns off immediately. This shows that even though it is plugged in for 6 hours, but without costs as I said there is no advance fees.

  I got this new situation and my local Toshiba service rejected my request due to the old mode of my laptop.

  My last chance is here

  Help, please.

  Best regards...

  Hello

  Well, if the battery LED blinks orange indicating a low battery charge.
  If the led blinks during the adapter is plugged, so in my opinion, the battery cannot be charged. Maybe the battery is dead. This is possible because you can recharge the battery, about 500 times. After this period, the battery will lose performance and dead.

• Led flashing light charging port

  Hi the charge led socket flashes white when connected. When laptopis turns off, it flashes for a while and then turns off. But when the laptop is turned on, it flashes all the time, whether they are connected or disconnected. Help, please.

  Hi @Reaper93,

  Welcome to the HP Forums!

  It's a great place to find answers and advice!

  You have the best experience in the HP forum, I would like to draw your attention to the HP Guide's Forums:

  Learn how to post and much more.

  I understand that when you connect the AC adapter of the power port light flashes continuously. If you turn off the laptop light continues to Flash for a while and then turns off.

  You connect directly to an electrical outlet, or you use a power bar?

  Have you tried another outlet?

  Here is a link to the HP laptops - tests and using the AC adapter that should help you.

  Please let me know the results.

  Thank you for your participation in the Forums of HP! We want to help you as well as others who may encounter a similar problem as yourself. Please consider tagging the post in order to solve your problem as "accept as Solution" to help other members of the community!

  To show recognition for my efforts, please click on the Thumbs Up icon below.

  Good luck and happy holidays!

• Pavilion DV7-3162nr: HP Pavilion DV7-3162nr does not turn on and the battery light flashes during charging

  I was upgrading my HP DV7-3162nr for windows 10 when all of a sudden the laptop stopped working and would not turn.

  The power adapter is plugged in and battery led was flashing. Now battery led does not at all depend on. When I press the Start button the laptop would try to start then turn off after about one second. However most of the time when when I press the button nothing happens.

  I took out the battery and tried to immediately start the alternating current, but the laptop is like there is no power. The led near the power connector is on the AC adapter is plugged in. I checked the tension between the adapter and it is correct to about 19 volts, I even loaded to 1.5 Amps and voltage remained close to 19 volts. I tried now on the button for more than one minute with applied power (no battery or AC) and no change when I tried to start with just AC.  The battery is old, but shouldn't the laptop run on just the AC adapter with the battery installed? I do not think that windows 10 has done this, but it's a weird coincidense that he died during the upgrade.

  I read about simular problems with flags of HP but nothing exactly like it.  The fact that I can not turn on the laptop with just the adapter seems to be a problem really bad.

  Anyone has any ideas I can try to let me know

  I was able to fix my laptop.

  I thought that it must be a hardware problem, because the laptop would not run just the adapter. And the adapter was good, as I said, he had the right voltage and can support the load.  So after looking at a lot of U tube videos on how to disassemble laptops and looking for schematics on the laptop which I couldn't find. I disassembled the laptop and a beep on the load circuit and it showing. What I found, it was a bad MosFet at the beginning of the charging circuit. The MosFet P/N P0603BDG has shorted door to the Source.  I was able to get the part of China via Ebay for less than $5.00 total and it took a week to arrive.

  Now, the laptop charging the new battery and works very well. I could have found the bad MosFet faster if I had diagrams. Does anyone know if it is possible to get the schematics for this HP laptop? I found a manual and it helped a bit to disassemble the laptop, but he had nothing on the main map.

  This problem is now solved hope it helps someone out there.

• Photo Gallery (using the charger with no xml)

  Hello, currently I am doing a photo gallery.

  Inside .fla, only 2 frame:

  1st is for my category 3: A, B, C.

  Stop();
  
  A.addEventListener (MouseEvent.CLICK, clickSection);
  B.addEventListener (MouseEvent.CLICK, clickSection);

  C .addEventListener (MouseEvent.CLICK, clickSection);
  
  function clickSection(evt:MouseEvent):void {}
  gotoAndStop ("gallery");
  Loader.Unload ();
  req = new URLRequest (evt.target.name + "_gallery.swf");
  createLoader();
  Loader.Load (req);
  }

  2nd is to load the external swf file.

  var req:URLRequest
  var container_mc:MovieClip
  var loader: Loader = new Loader();
  
  req = new URLRequest ("A.swf");
  createLoader();
  Loader.Load (req);
  
  function createLoader (): void {}
  loader = new Loader();
  loader.contentLoaderInfo.addEventListener (Event.INIT, initListener);
  loader.contentLoaderInfo.addEventListener (Event.COMPLETE, fileLoaded);
  }
  function initListener(evt:Event):void {}
  addChildAt (loader, 1);
  }
  
  function fileLoaded(evt:Event):void {}
  container_mc = MovieClip (loader.content);
  }

  debug (click on the button and it pops it):

  RangeError: Error #2006: the supplied index is out of range.
  at flash.display::DisplayObjectContainer/addChildAt()
  at main_gallery_fla::MainTimeline/initListener()

  no idea why?

  Yes, two... the first being the most important...

  (1) learn how to use the documentation in support (and Google).  If you search for addChild in the help documents that it will define what you need to know to use it.  It is the same for any other part of the AS3 language.  The help documents are a basic tool in learning/using AS3 (or any language).

  (2) use: addChild (loader);

  I couldn't really follow your description in the first post, but I expect almost a multitude of other errors unless I'm misinterpretting what you call.  Very often mistakes the consider in order, not all at once.

• Gallery flash for swf files

  There is a model out there for a flash Gallery display other swf files?

  Like a gallery of images, but instead of pictures, they are swf files (some might be interactive as well).

  Thank you!

  You may need to do your own research for such a model, but you should be able to convert a version of the image in a swf without too much modification version.  If you load them dynamically files use the same commands.  You may simply hide the display area of the swf file as their stadiums will not define their boundariies when they are loaded into another swf.

• cannot open any what with adobe flash have charged 15 times and it opens no whatever can not open all downloads since the start outlook

  I received my Bill electric co. in a pdf document that says you need Adobe 9.2 or better I have adobe XI but he just continues to say to dwnlde, I have at least 15 times and it won't work you had a good program and you blew it.

  Note that Adobe Flash and Adobe Reader are two different programs.
   
  Adobe Reader has been problematic for years. I suggest you download this PDF reader and see if it works.
   
   
  Foxit Reader
  http://www.foxitsoftware.com/Secure_PDF_Reader/
   
   
  If the attachment try opening with Adobe, save it first and then create an association.
   
   
  1. download and save the attachment to the office.
  2. right click on the saved file.
  3. Select: Open with on the shortcut menu.
  4. click on: choose [default] program.
  5. Select: Foxit Reader.
  6. check: always use the selected program to open this type of file.
  7. click on OK.
   
   
  
   
   

• Auto-Charger a .swf in a Flash. Charger

  Hey,.
  
  I googled until my fingers Bled, but I don't know how to load an external flash inside a mx.controls.Loader Flash file automatically.
  
  Links for files are;
  
  http://www.jasminracheldesigns.com/files.rar
  
  Thanks in advance, jasmine

  This means without button, it loads when the origianal .swf file load with the mx.controls.Loader inside!

  still, there is no way an as2 swf can load an as3 swf, and have any actionscript as3 work.

  You can use getURL() in your swf file as2 to open the as3 swf file in its own browser window (and thus its own plugin flashplayer) and it will work.

• (Flash 8) Charger & amp; ProgressBar component problem

  Hey all,.
  
  My Preloader Flash 8 works, even if I have a problem with Loader & ProgressBar components. The film which takes over once the Preloader.SWF is done and the movie. SWF comes in small (100px X 100px) and is off to the left of the screen.
  
  Thanks for your help :-)
  
  I did 2 SWFs:
  1 loader called: ease_of_access_02_preloader.swf
  -Size degree is: 640 x 550
  -Loader size: 640 x 550
  -Chargers name is: ease_loader
  -contentPath: ease_of_access_02.swf
  -The name of the ProgressBar is: ease_progressbar
  -Source: this ._parent .ease_loader
  -All are to be placed on the same chassis: 1
  
  2 film is called - ease_of_access_02.swf
  -Degree size is 640 x 550

  Yes, that's the thing! :-)

  Thank you very much!

• Flash site gallery - two Gallery dysfunction?

  Hi all!

  I just wanted to run it by some pros flash out there. I have a photo gallery flash, but two galleries, a reason any 'do not work '.

  Please go to http://photography.khangp.com.

  When it opens, you will see 'Portrait' and 'Product' on the top as well as other galleries. But these two are the only ones that do not work.

  In a local environment, they work as it should, but not on the web. I don't know what is the cause.  I thought that maybe it had something to do with the XML file but I went on it a dozen times and all withdraws! Again, the same gallery works perfectly in a local environment, but I don't know what is happening with these two in particular.

  I would appreciate if anyone can help us with that.  Moreover, I know almost nothing about flash, and it was all just a model I bought.

  Thank you!

  your first mistake is:

  TypeError: Error #1010: a term is undefined and has no properties.

  at com.flashgallerynet::MP3Player/playlistLoaderCompleteHandler()

  at flash.events::EventDispatcher/dispatchEventFunction()

  at flash.events::EventDispatcher/dispatchEvent()

  at flash.net::URLLoader/onComplete()

  the first problem with your portrait gallery is there is none:

  http://photography.khangp.com/bin/data/images/portrait/children/thumb/01.jpg

  the first problem with your product gallery is there is none:

  http://photography.khangp.com/bin/data/images/product/jewelry/thumb/01.jpg

  p.s. the number of cases online.  That is to say,
  http://photography.khangp.com/bin/data/images/product/jewelry/thumb/01.jpg is not the same thing as http://photography.khangp.com/bin/data/images/product/jewelry/thumb/01.JPG

• Create a flash Gallery

  Hello

  I'm trying to integrate a gallery flash on my site like the gallery found on the page of follwing http://www.photo-ireland.net do - do I have to do to get there, you have all recommended documents, I could follow?

  Thank you very much

  Aaron

  The Gallery on the link you provided is not a Flash Gallery, it's a jQuery - basic design.

  If you have Flash, that Flash publishes an html page when you publish your swf and this page allows to set up the gallery page or copy / paste the code into this page in your expected html page.

  If you do not have Flash, you can use coding swfObject to embed your Flash content...

  http://code.Google.com/p/SWFObject/

• Nex6 do not charge the battery

  I recently bought a Nex 6. After charging the battery, I went out to take pictures. I used it until the device displays stack "exhausted" and me has failed to take more pictures.

  Once back, I charged all night and the battery is still charged. the camera always shows 'battery exhausted', I noticed that every time it when I connect the charger micro USB to camera for this, seeing him load a few seconds then turns off. There is no flicker.

  Can I have a bad battery? I just bought two days back so I don't think that the battery is old.
  No idea how can I charge the battery?

  Ashish

  Hi Ashish,

  Make sure that you use the provided micro USB cable for camera NEX6 to load.
  Additionally, make sure that the battery is correctly inserted in the camera.

  Remove the battery and reinsert.
  If the charge indicator doesn't light up or flashes during charging, make sure that the metal contacts are free of any foreign body that can prevent the load. Use a dry cloth to wipe the dust or any other material on the battery terminals.

  Turn the switch to OFF while loading the battery. If the switch is on, the camera is unable to charge the battery.
  If you have tried to charge the battery by connecting to a computer, then try to connect the AC adapter provided to the micro USB cable and a power outlet.
  After charging for a few minutes, try to turn on the camera to check if the battery is properly charged.

  If the issue is still unresolved, the service may be required. Click the link status & repair for repair options available.

  If my post answered your question, please mark it as an "accepted Solution".

• How to import and transport of the images in the flash player

  How to export images to my Windows live photo gallery flash drive.  I know how to import but not export it from my computer.

  The best way to copy files is to go to your pictures library, where all of your files to import dated records or the named files are, with photos are inside of them.

  Insert your USB key, and then drag the files one by one to the drive letter it appears the inserted in, storage device

  When all the files have been copied to the flash drive, right-click on the drive letter and select eject in the right click menu.

  If the backup of windows appears and says you have files to burn to close the pop-up window and continue slide it / drop or you can also use copy and paste, right click or ctrl + c to copy and ctrl + v to paste.

  Why do your best records instead of separate pictures, it is that the folder structure is transferred as well.

• BlackBerry Smartphones when HS-655 charged?

  I just got a headset HS - 655 Bluetooth.  Nowhere in the Start Guide he says:

  1 How do you know when it is fully charged?

  2 How do you know it's actually supported?

  3 How do you know when it becomes weak?

  USING THE INCLUDED CHARGER

  The indicator light flashes red while charging and turns off

  When fully charged.

  1 hour = minimum charge

  3 hours = charge complete

  CHARGE LEVEL INDICATION

  When the headset is turned on, the light will be

  briefly appear the headset charge level.

  3 Red flashes = more charge 2/3 battery

  1/3 to 2/3 battery charge 2 red = blinks

  1 flashing red = less than 1/3 battery charge