game sims3 will work ok with windows 7

Similar Questions

• My Eternity Bigfish game Mahjong towers work properly with Windows Vista. It does not work with Windows 7.

  I click on the game icon and the game window and page layouts start charging. But the process of loading stops at halfway and I get the following message: "Mahjong Towers Eternity has encountered a problem. Please make sure that you have the latest version of the game. I have the only version of the game. In addition, once I have delete the message I can't delete the game window unless I'm using the Task Manager.

  Hi martham

  Thanks for posting in the Microsoft answers site!

  It is a standard error message coded in the game that occurs when MTE there is a mistake, for all sorts of reasons. It is a game crash, not a drive failure. You don't need to upgrade to a new version of the game. If you have downloaded a lot of tilesets and backgrounds, clean those out of your game directory. And if you have a large number of layouts in your Favorites list, delete the 'my' file that is located in your game directory

  In addition, check the compatibility of the game with Windows 7 from the link below:

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  Try to install the game in compatibility mode and check if this solves the problem.

  See the link below for more details:
  
  Make older programs in this version of Windows
  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  For more assistance, please visit our Bigfishgames forum:

  http://forums.bigfishgames.com/games/list.page
  
  I hope this helps!
  Kind regards
  Gokul - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How can I make my Saitek X 52 Pro USB flight game controller work propperly with Windows 7?

  How can I make my Saitek X 52 Pro USB flight game controller work propperly with Windows 7?

  I'm sure I installed the correct drivers and software, but when I press a button on the X 52 flight control freezes (for example in FSX).

  Kind regards

  Niels

  Hello

  Have you downloaded the drivers from this link in the last answer?
  Click on this link and make sure you have your version of Windows 7 selected; 32-bit or 64-bit.
  Then there will be the hyperlink that says "free download required.
  Click on that and install the drivers for this device.

• Re: Toshiba Store Alu 3.5 "1 TB HARD drive works only with Windows 2008 64-bit

  Just bought this as a backup device for Small Business Server 2008 running on Windows 2008 64-bit. However it does not? Are there drivers anywhere for this or it is simply not supported and I need to buy an alternative solution?

  Plugged into my laptop Windows 7 64 bit and no problems.

  Someone else had the same problem?

  Hello

  Unfortunately, there is no other software by download.
  I checked the driver page Toshiba in the Options area but didn't find anything

  AFAIK it of a plug & play HARD drive if you n t need any software to recognize the HARD drive

  There may be a password.
  Try this:
  Connect your HARD drive to the computer when the HARD drive is working
  Select the CD drive with your browser (password)
  Run the ONSPCLCK.exe
  Select 'Options '.
  Select "Disable security password"
  Enter your current password
  Unplug the HARD drive
  connect the HARD drive

  Now, it will work, but with no password protection. Perhaps it would work

• How do I know if a site Web Builder software work well with Windows

  I create websites in My spare time for a little extra income I wanted to know how do I know if a software will be safe and work Weel with Windows.i ask because I am thinking to buy a new one from the site Builder that's Coming Out and the last thing I need is a computer crashing here is the software in Question self build product review can someone tell a way to ensure that its windows compatible? and if not how to know? Thank you

  You'd better post this question in the Forum of Windows answers to the following address

  http://answers.Microsoft.com/en-us/Windows

  In any case, for compatibility with Windows 7, you can use the Windows 7 Compatibility Center website at the following address

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  Good bye.

• Microsoft Money 97 will work correctly under Windows 7?

  Microsoft Money 97 will work correctly under Windows 7?

  Hi Jsmale,

  Microsoft Money 97 is not compatible with windows 7.

  You can also consult the following link:

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?type=software&s=Microsoft%20money%2097

  Swati K - Microsoft support technician

  Visit our Microsoft answers feedback Forum and let us know what you think

• SENTINEL HASP KEYS 3.25 WORKS ONLY WITH WINDOWS 7

  I lived several of these posts here about the hasp and windows keys 7 and I tried many suggested fixes, but nothing works. I installed the software using Windows XP Mode in Virtual PC, I've updated, uninstalled drivers, reinstalled with and without the hasp key inserted. I use the Sigmanest V4, Mastercam9, and Mastercam10 software. All three of these programs worked fine with Windows XP service Pack 3. I did everything that I mentioned above and some of which you try to run the software in compatibility mode. Nothing I try works, Sigmanest software seems like it is recognizing the hasp key because it will be open, but it will not open in demo mode. The two programs Mastercam do not even recognize the hasp key. They open up and say that there is no present hasp key, then close. After years that Windows 7 has been out someone got a solution for this. Maybe they have, but I can't?

  Hello Chad,

  Thanks for posting your query on Microsoft Community forum.

  According to the description of your problem, it seems that you are trying to install the drivers for the Sentinel 3.25 HASP key. I checked the official site, it shows drivers for Windows, but did not mention the version of Windows.

  Here is the link: http://sentinelcustomer.safenet-inc.com/sentineldownloads/?s=&c=End+User&p=HASP+HL&o=Windows&t=Runtime+%26+Device+Driver&l=all#.

  I also checked this device and software Center of Microsoft Compatibility, and I couldn't find any information out there in that regard. So I suggest you to contact technical support SENITEL for troubleshooting further because they are the best people who can say that this device is compatible with Windows 7 or not.

  Hope this information is useful. Do get back to us after contacting them and please update your question on the forum.

  Thank you.

• The Gladiators: Galactic circus games does not work on my windows 7

  Title: Hi Arya Asok S... .my game (The Gladiators: Galactic Circus Games) didn't work for my windows 7 what I need to do?

  I tried to start the game, but it seems to be that it started with an earlier version of windows, such as windows XP...

  I tried to start with the troubleshooting utility and choose windows XP pack 3. .but he did not say this message:
  "Exception EAccessViolation in module Gladiators.exe The one (with dashboard on top) 00000000."
  ACCESS violation address 00000000. Read of address 00000000 ".
  also...
  Tried changing the compatibility of it in properties, still did not work, gave the same message every time. Also changed the resolution, colors, effects, etc., but still did not run.

  do I have to use windows xp and remove my windows 7 for this game! ??

  or is there another solution for this problem

  help pleasee Arya Asok

  and thankss

  Hello
   
  As the manufacturer of the game is not Microsoft, I suggest you to contact the game manufacturer for assistance.

• Canon MP250 will not scan with Windows 7. 2,155,2 error code

  Canon MP250 will not scan with Windows 7. 2,155,2 error code

  This Canon MP250 printer/scanner never worked well with Windows 7 and 8 for example. Printing would just hang out and print only the laptop restarts. Scanning has been difficult but eventually worked. Now, the scanner does not at all.

  This is the message that comes with the 2,155,2 Error Code:

  Cannot communicate with the scanner. Cable may be disconnected or scanner may be turned off. Check the status. Scanner driver will be closed.

  They aren't joking about the closing of the scanner driver. I didn't know that the closure would be permanent.

  Also, I get the following message when I plug in the printer:

  USB device not recognized.

  It appears to malfunction. Windows accepts the USB port only when I unplug the power cord of the printer and wait half a minute before plugging new.

  Canon told me I need to download the driver software of its UK site and updated. Fact that several times, also uninstalled and reinstalled the original software and the driver supplied with the disc.

  Software will download, but not install. Guard me with the message: do you want this program to make changes to your computer?

  I tried to install the updated driver manually, because Windows does not find a driver for this printer.

  It drives me crazy, slowly. Can anyone help?

  Sorry for the repetitions of my question. I'm new here and I'll try to find the right forum.

  Instead, please answer your original on the subject (this one) thread.

  It's his original-online http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/windows-7-will-not-communicate-with-canon-mp250/2bb17ed8-41ee-496a-88c3-79b3aa7c7e81 thread (June 8, 2013)

  @BryanBeeMM => Please post a follow-up while answers to your real in order to avoid even greater confusion original thread => http://answers.microsoft.com/thread/2bb17ed8-41ee-496a-88c3-79b3aa7c7e81

  Thank you.

• HP cp1700 printer works only with Windows 8

  My HP cp1700 printer no longer works with Windows 8, but worked well with Windows 7. It is visible in printers and faxes, but displays always 'offline '. This utility is not correct the problem and I could not find any solution working on the forum. HP support reminds me of Windows drivers, which are installed. I uninstalled and reinstalled the printer with hard boots but I have always the same question. Any ideas?

  Problem solved with the driver HP CP1700 for Windows 8

  1 module printer via a usb cable to your pc

  2 turn on your printer and let windows to install the printer

  3. go to control panel of configuration, devices and printers, and locate the hp cp1700

  4. right click, properties, hardware, again, then click on to the left of the change settings tab

  5. on the driver tab, click roll-back of driver which previous version of 2012 at the 2006 pilot

  6 follow steps 3 and click on put updated driver and click search automatically and the winows 8 will find for the driver you on the internet and you will have all the features that have been installed for your printer in the end.

  Hope you enjoy this :)))

• LR4 will work on a windows 10 system?

  I'm looking to upgrade to a windows 10 system. LR4 will work on this system?

  I use Lightroom CC 2015 on Windows 10. But I still have my 4.4 installed Lightroom. I come to him from time to time, but primarily as a reference for me to answer some questions, such as this one. I played a little bit with Lightroom 4.4. I know that the slideshow module works very well. But I did no extensive editing with it. Based on my limited use, I would say that Lightroom 4 will work fine on Windows 10. If you run the Advisor of implementation level (or whatever it's called) it will tell you if you have any software that is not compatible. I have no problems with any of my previous software since Windows 10.

• MacBook Pro (retina, early 2013) will work well with Dell P2715Q monitor?

  MacBook Pro (retina, early 2013) will work well with Dell P2715Q monitor?

  Doesn't look like 4K is a good option.

  /macbook-pro-retina-display-how-to-manually-switch-http://www.EveryMac.com/systems/Apple/Macbook_pro/MacBook-Pro-retina-display-FAQ

  Graphics.html #extdisplays

  Built-in display:

  15.4 "Widescreen

  Native resolution:

  2880 x 1800

  Details:

  This model has a screen 15,4 "color widescreen LED backlit with IPS technology with a 2880 in native resolution from 1800 to 220 DPI (178 degrees viewing angle). It also supports of the resolutions on the scale of 1920 by 1200, 1680 by 1050, 1280 by 800 and 1024 by 640. See also: how can you 'strength' or 'hack' the Retina Display MacBook Pro models running at the native resolution or otherwise more on screen that adapt default?

  2 screen support:

  Double/mirror *.

  2nd Max Resolution:

  2560 x 1600 (x 2 *)

  Details:

  * This model supports a simultaneous maximum resolution up to 2560 x 1600 on two external displays via Thunderbolt. Alternatively, it can support a single screen up to 2560 x 1600 per Thunderbolt and one display up to 1920 x 1200 through HDMI. Although it can theoretically supply all the three external displays, such as confirmed by a useful player, it runs too hot with three connected screens.

  http://www.EveryMac.com/systems/Apple/Macbook_pro/specs/MacBook-Pro-core-I7-2.7-15-early-2013-retina-display-specs.html

  Although I think I read some hacks to make 4 K @ 30 fps.

• RoboForm does not work with your new browser. It is very fustrating and works only with Windows Explorer. I need to reinstall the old FIREFOX program?

  RoboForm does not work with your new browser. It is very fustrating and works only with Windows Explorer. I need to reinstall the old FIREFOX program?

  RoboForm has already released a version with support for the latest version of Firefox. See http://www.roboform.com/support/news. Try upgrading to the latest version of Roboform.

• NB200 series will be preinstalled with Windows 7?

  Hi all

  This is my first post here. I would like to know if anyone knows if these netbooks will be shipped with Windows 7 next month? There is no point to buy one now if they will come with Windows 7, in about 30 days.

  Thank you

  Yes I think they will come soon with Win7. Its probably a stripped down version similar to XP Home.

• HP Photosmart D110 printer will not install with Windows Vista?

  HP Photosmart D110 printer will not install with Windows Vista?

  Hello

  (1) what happens when you try to install the printer?

  (2) you get an error message?

  Method 1: You can run the fixit available in the link below and check to see if that makes a difference

  Problems printing and printing errors

  http://support.Microsoft.com/mats/printing_problems/

  You might want to know

  Add or remove a printer

  Thanks and greetings

  Ajay K

  Microsoft Answers Support Engineer
  ---------------------------------------------------------------------------------------------------------
  Visit our Microsoft answers feedback Forum and let us know what you think.