Impossible to click on Skype username and password

Similar Questions

• Log Windows username and password

  When I try to send or to receive my email via e-mail, windows security asks my username and password that was set in place 4 years ago and I don't remember or know how to change.

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  See you soon.

  Mick Murphy - Microsoft partner

• I want to print all usernames and passwords

  How to print all my saved usernames and passwords? OR even one at a time?
  my handwriting is so poor that impression would be a great HELP
  Thank you so much rex thompson.

  You can use this module to export passwords in a file xml or csv, that can be displayed in a text editor:

  https://addons.Mozilla.org/en-us/Thunderbird/addon/password-exporter/

  http://chrisramsden.vfast.co.UK/3_How_to_install_Add-ons_in_Thunderbird.html

  If you open Tools/Options/Security/passwords / Saved passwords, click "Show passwords", then Alt-print, open an editor of graphics or paint and paste (or paste as new), the display of passwords can be saved as an image.

• How can I reset my "authentication required" username and password? The fields are always filled with my old information.

  How can I reset my "authentication required" username and password? The fields are always filled with my old information.

  Follow these steps to delete the recorded data (form) in a drop-down list:

  1. Click on the (empty) input field on the web page to open the drop-down list
  2. Select an entry in the drop-down list
  3. Press the DELETE key (on a Mac: shift + delete) to remove it.
  • Tools > Options > Security: passwords: "saved passwords" > "show passwords".
  • http://KB.mozillazine.org/Deleting_autocomplete_entries

  You may need to clear cookies from this site, so if you checked a box to remember you.

• Username and password required for the update of the BIOS download?

  Hi guys,.

  Hoping someone could help.

  Yesterday, I received my Mini of click on Satellite and I currently support after discovering there is a certain drivers are installed before you can actually use the thing.

  While the laptop is in charge, I try to download the update of the BIOS on my laptop, so I can transfer it to my laptop once it is fully charged... I did have problems downloading tastes of the driver wifi for example but when I try to download the BIOS update opens a new and tab where Toshiba ask me a username and password? I tried to enter my username and password I used to register on this site and I also tried using another computer to download it, but without success. It is worth noting that I could partially download the file last night but then it failed to half way through download?

  Any suggestions?

  Thank you very much

  Liam

  Hi all

  I am eager to read an answer that helps on these issues...

• When they surf on the web as an administrator, Firefox remembers usernames and password, but when words I surfed as a standard user, it doesn't.

  Before Firefox updated to 6, my user ID and passwords that I had saved, or ask the site to remember was always available. If I close the browser and later began a new session, my ID's were still on the Web site when I went to them. After yesterday, 31/08/2011, updated at 6, when I close the browser after a session, usernames and passwords are gone and must be re-entered. This only happens when I sail as a "standard" user If I surf the web as administrator, all my saved info is still there.

  No worries; Type "subject: config" into your address bar, and you should get an alert guarantee invalidated. I leave the checkmark in the box for warn me next time.

  After you click "I'll be careful", Firefox shows you multiple options, I'm guessing around 1500. Entering 'form' in the filter will only display options containing this string. Options I searched automatically deal with remembering the info you repeatedly enter in web forms.

  Some changes require a reboot, and I'm not hip to that. At least in this case, you will still restart to see if it worked.

  It is also critical that navigating the Windows registry, but the same kind of precautions apply; You can seriously break your stuff here. Just like Windows and the registry, a clean reinstall can fix everything you break here, but it's always a concern that you would avoid instead. Be careful and patient.

  Take notes, which you change the value, so you can change back - right click to copy the name of the option, its value or both, thus facilitating a list of notebook. Remember that you may need to change a couple.

  I am not sure that these options can relieve your frustrations, but this is my last idea in addition to a clean reinstall of Firefox.

• Cannot connect on demand (PC - Win7) - good username and password; work on the web page

  I have a big problem. I can't log on Skype on my PC (Win 7) application. The password is correct and therefore the username. I tried to connect via accounts my microsoft, Skype and facebook, but it does not work. The strange thing is that it works on the internet page. I tried to change password several times, but it's not resovle the question.

  When you connect with the Skype account I get the message "Cannot connect" (in Swedish).

  When you connect with Facebook and Microsoft account I get the message "sorry, we don't know your loggin information - please controll your Skype name and password.

  The Skype app is updated using the "Search for updates" function in the "Help" menu to the bottom of the list.

  All Skype versions prior to 6.14 are now being disconnected and this means that you can longer use the version 6.11. You must update your Skype.

  http://www.Skype.com/en/download-Skype/

• HP 2540: HP 2540 default username and password?

  When I go into EWS in my browser and you want to configure the network to use Web Services it askes for a username and password, I assume that by default, because I never put one in place in my user's guide it doesn't refer to any, I have tried

  admin/admin, admin/white, white/admin, I tried the prrint password 54495359 live, etc, nothing works, can someone advise how knowledge, scereen shot attached

  

  Hello @Currimundi ,

  Welcome to the HP forum.

  I understand that you are either prompted for a user name and password, when you try to access EWS printers.

  I want to help you with this.

  Authentication should not be held. The user guide does not because it shouldn't be there.

  It can be configured for in SAP, but technical support will normally advise against that.

  Most of the time when authentication has been put in place, restore the default settings of the network clears the question.

  That is the problem. To restore the default settings of the network there is no option on this printer.

  Also, there are no instructions to reset the default printer.

  If you are in warranty, I would call technical support.

  They may have to reset or another option.

  Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

• WSN NI 9792 safety 1.2: initial configuration? By default the username and password?

  Hello

  With NI WSN 1.1, using a 9792, I can click on the button set the permissions, and if none had been defined would simply ask me a new administrator password.  Now with NI WSN 1.2, when I click on the button set the permissions he takes me to the web interface of the 9792 and said "nobody is connected or you don't have permissions to view/edit users, groups, and permissions.»  When I click on the "connect" button, a box opens and asks me a username and password.  I scoured the notes version of the help files and the internet, and it seems there is NO documentation on how to set up the first name of username/password combination, or it indicates what combination of username/password default username there might be.  I also tried a brand new 9792 straight out of the box and load of 1.2 to this subject and it has the same problem.  Is there something obvious that I'm missing?  How a person initially configure security on the 9792?

  Hello, Garrett,.

  Thanks for your post!

  Looks like you're having need for information on how to find the information of your 9792 newspaper. When you use NEITHER-WSN 1.1 allowed us users to define the initial password and this is still the case for the 9791. The 9792 is a gateway OR WSN node and a target time LabVIEW Real-time. Its default log in information or lie in a (KB) Knowledge Base using LabVIEW or helping MAX. You use LabVIEW 2009 SP1 or LabVIEW 2010?

  The default name of the user and the password is the following:

  user name: admin

  password:

  KO

  By default the username and password for the newspaper in a real-time controller

  http://digital.NI.com/public.nsf/allkb/14D8257A7724BE85862577F90071B73F

  Help of LabVIEW

  Start > all programs > National Instruments > xx LabVIEW > LabVIEW help

  Then go to... Fundamentasl > working with egalitarian and target > how-to > control and configure a remote device from a Web browser

  Help MAX

  Open MAX > help > MAX Help (can also press F1 if open MAX)

  Then go to... Help MAX remote systems > LabVIEW Real-time targets Configuration > Device Configuration > logging into your system

  The help link above LabVIEW is called in 9792 under Related Documentation start guide that directs you using LabVIEW.

  NEITHER Wireless Sensor Network Getting Started Guide

  http://www.NI.com/PDF/manuals/372781c.PDF

  Is the information you were looking for? Please indicate if there is something else we can do.

  See you soon

  Corby

  WSN PES OF R & D

• PC can see and access the laptop without asking for a user name and password but the laptop cannot access the PC because it asks me a username and password that I don't know.

  Vista - Windows 7 network connection. username and password is unknown.

  Hello

  I just got a laptop with windows 7 on it and I want to connect to my other PC for it, they are on the same network through a router. the PC can see and access the laptop without asking for a user name and password but the laptop cannot access the PC because it asks me a username and password that I don't know.

  If someone could answer this question, it would be great.

  Hello
  Maybe this can help.

  Win7 when configured on the peer-to-peer network has three types of configurations of sharing.

  Group residential network = only works between Win 7 computers. This type of configuration, it is very easy to entry level users to start sharing network.

  Working network = fundamentally similar to previous methods of sharing that allow you to control what, how and to whom the records would be shared with.
  
  Public share = network Public (as Internet Café) in order to reduce security risks.

  For the best newspaper of the results of each computer screen system and together all computers on a network of the same name, while each computer has its own unique name.

  http://www.ezlan.NET/Win7/net_name.jpg

  Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq.html#trusted
  Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  ------------------------------

  If your network consists only of Win 7 and you want a simple network, use it.

  http://Windows.Microsoft.com/en-us/Windows7/help/videos/sharing-files-with-HomeGroup

  After you have configured the homegroup, scroll to the bottom for the Permission/security section.

  -----------------------------

  Win 7 networking with other version of Windows as a work network.

  In the center of the network, by clicking on the type of network opens the window to the right.

  Choose your network type. Note the check box at the bottom and check/uncheck depending on your needs.

  http://www.ezlan.NET/Win7/net_type.jpg

  Win 7 - http://windows.microsoft.com/en-us/windows7/Networking-home-computers-running-different-versions-of-Windows

  Win 7 network sharing folder specific work - http://www.onecomputerguy.com/windows7/windows7_sharing.htm

  Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx

  Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040
  Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx

  Setting Windows native firewall for sharing XP - http://support.microsoft.com/kb/875357
  Windows XP Patch for sharing with Vista (no need for XP - SP3) - http://support.microsoft.com/kb/922120

  When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

  -------------

  If you have authorization and security problems, check the following settings.

  Point to a folder that wants to share do right click and choose Properties.

  In the properties

  Click on the Security tab shown in the bellows of the photo on the right) and verify that users and their permissions (see photo below Centre and left) are configured correctly. Then do the same for the authorization tab.

  This screen shot is to Win 7, Vista menus are similar.

  http://www.ezlan.NET/Win7/permission-security.jpg

  The Security Panel and the authorization Panel, you need to highlight each user/group and consider that the authorization controls are verified correctly.

  When everything is OK, restart the network (router and computer).

  * Note . The groups and users listed in the screen-shoot are just an example. Your list will focus on how your system is configured.

  * Note . There must be specific users. All means all users who already have an account now as users. This does not mean everyone who feel they would like to connect.

  ---------------------

  *** Note. Some of the processes described above are made sake not for Windows, but to compensate for different routers and how their firmware works and stores information about computers that are networked.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• I installed G10-ebook but when open it and write down the username and password it starts and stops immediately and closes what should I do?

  I installed G10-ebook but when open it and write down the username and password it starts and stops immediately and closes what should I do?

  Hello

  Step 1: Check if the problem persists in the clean boot state.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Reference:
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
  1. click on start and then click Run.
  2. type msconfig and click OK.
  The System Configuration Utility dialog box appears.
  3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.
  4. When prompted, click on restart to restart the computer.

  Step 2: Also, look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.

  Reference:
  Using the event viewer
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/snap_event_viewer.mspx?mfr=true

  Understanding of event viewer
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/event_overview_01.mspx?mfr=true

  Procedure to view and manage event logs in Event Viewer in Windows XP
  http://support.Microsoft.com/kb/308427

• CP3525: Reset username and password CP3525

  We lost the username and password for HP CP3525.

  So now, we can not connect to the printer via a Web browser.

  How can I reset to factory settings?

  Usually, you'd do that with a cold reboot.

  I'm not able to consider all of this moment, I could do a google search, but now that you know the name of the procedure you can do it too.

  Cold reset will do everything, including the network at default settings.

  If my post is solved your problem and click the accepted as button solution under him.

  In order to thank a Tech for a post click the thumbs up button under the post.

  You can even click on the two keys...

• Home network connection will not be ' don't forget username and password

  I have a small home network two PCs connected via a wireless router - Vista Home Premium connected wireless and Windows 7 Home Premium LAN connected.
  I have no problem with the Windows 7 PC, but the PC Vista doesn't remember the "name of PC-domain\username" and the password (from the Windows 7 PC) despite the box being checked. Once connected there no problem access the required records and the printer.
  I tried to use "map network drive", but, when the Vista PC is started, the network drive was a red x against it and I have to go through the PC/username and password rigmarol.
  The Vista PC belongs to another Member of the family and when she wants to print I have to intervene to make the connections. In my view, that it should be able to be done automatically.

  Hi WeDontByte,

  You can store passwords in Windows that you use to connect to Internet sites or networks. In this way, you don't have to type your password because Windows logs you automatically whenever you return to this place.

  1. open user accounts by clicking the Start button, click Control Panel, click user accounts and family safety (or by clicking on user accounts, if you are connected to a network domain), and then clicking user accounts.
  2. in the left pane, click manage your network passwords.
  3. click on Add.
  4. in the journal on the box, type the name of the computer on the network or the URL of the Web site that you want to access.
  5. in the user name and password areas, type the user name and password that you use for this computer or a Web site, and then click OK.

  Store passwords for automatic logon
  http://Windows.Microsoft.com/en-us/Windows-Vista/store-passwords-for-automatic-logon

  I hope this helps!

  Halima S - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• network username and password

  Hello. me and my brother using two laptop computers with win 7. 1 laptop, I created a network using wireless (WI - FI) connection (network name:-ABC). and the laptop 2 my brother joined in this ABC network. But when computer access mobile 1 portable 2 asking a user name and password, I tried computer name and login password, but will not work. Please tell me what will be the user name and password with easy examples.

  Hi Rajkumar,

  Thanks for posting your query in Microsoft Community.

  I understand that you want no more to this popup asking username and password or to know the user name and password and I'll be happy to answer your query.

  What file sharing with another computer on a network, you can share files to "password protected sharing" or not. In your case, you have made changes in the settings and turned on password sharing is another computer application username and password protected.

  Let's try the following steps and turn off password protected sharing:

  a. Open advanced sharing by clicking on the Start button settings , and then clicking Control Panel. In the search box, type network, click network and sharing Center, and then in the left pane, click change advanced sharing settings.

  b. click the chevron to expand your current network profile.

  c. under password protected by shares, select turn off password protected sharing

  d. click save changes. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  Reference: share files with someone

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• View/edit saved usernames and passwords

  Is it possible to view and change the usernames and passwords autormatically saved on Internet Explorer?  I found a way to do this on Firefox but not Explorer

  Hello

  Perform the steps mentioned below and see if it helps.

  a: click on Tools > Internet Options.

  b: Then click on the content tab.

  c: and then click parameters next to the AutoComplete button.

  d: Click the manage passwords button.

  e: then click on Windows credentials.

  Hope this information helps.