Games BACK does not not on Vista CMD

I had a few games BACK and whenever I try to run the application error msg reads: "this system does not support the mode full screen."
is the CMD / configurable BACK to full mode? TIA

257220 Hello,

The command line is not BACK, although somethings can operate to a certain extent, it would be probably better to use an emulator LIKE DOSBox.

Tags: Windows

Similar Questions

  • the sims3 game laucher does not open to play

    I played the sims3 for several months, and now the game Launcher does not open to play the game. He won't go to the black screen before the green diamonds came then go to my office. Now, it stays black. I uninstalled and reinstalled but still the same thing. I played on my daughters account one day and the next day, he would not come. Been in contact with important and done what they suggest, but still does not work. Now, I can't even uninstall the game to reinstall. I use windows vista, would be the problem and why after 2 months of game would it start? Any ideas with this?

    anything that claims to speed up your computer or clean any kind of unused garbage settings etc etc files will usually be more harm than good.

    update your video drivers and if that doesn't help, try to reinstall the game and install updates for the game, if there is.

    Don't forget to check out the awesome group tap: The Tony Danza Tap Dance Extravaganza

  • game Windows does not

    game Windows does not

    Hello Rob Broome.

    Thanks for posting on the Microsoft answers Forum.

    This error is probably the result of a damaged registration service.
    To resolve this problem: -.
    1 start, run and type cmd
    2. type msiexec / unregister (note the space before the slash) and press enter
    3. type msiexec/regserver (note the space before the slash) and press enter

    Click here to download the Windows Installer Cleanup utility. You can use the utility to remove installation information for programs that were installed by using Windows Installer. Remember that Windows Installer CleanUp Utility does not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall on. Delete the mention of the problem program or software.

    Then try again and install any program you install problems.

    I hope this helps.

    Sincerely,

    Marilyn
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

  • Game Center does not not ios 9.2.1

    My game Center does not work because I have upgraded to ios 9, of other updates not helped either. IPhone 5, ios 9.2.1 running.

    I can't use the games requiring a game Center, I can't play Center settings to connect either, I can't open the app - empty space game Center. Before sometimes worked reboot iphone up to 3 times. However it does more either. The problem persisted since November 2015. I filed two complaints to apple, but no one has contacted me. I paid a few games as well, im pretty surprised I can't use them unless I have flight mode. This is ridicolous how apple gift '! t do nothing about this - after googling theres all useres has the same problem. So, I tried to retrieve all parameters. Nothing workes.

    Please resolve.

    contacted apple support and after 1 hour phone resolved by these steps

    The solution that worked for me:

    1 Bakckup Iphone on Itunes

    2. restore iphone - restore mode turn iphone off, then press on and hold the "home" button and connect to the computer (although still the hold home button)

    ITunes u questions and then download latest ios and then restore your phone to factory settings, as if it was newly purchased...

    3. load the Itunes backup

  • Game Center does not work after update to ios9.2 also the games who need freezing when loading so I can't play you can solve this problem, so I can play games on my ipadmini2 again?

    Game Center does not work after ios9.2

    problem known, search the Forum, many details.

  • Save the game version does not work

    Save the game version does not work. I have recently converted item 6 to 8 items. The conversion went well without any problems. The organizer and the editor work very well. However, when I try to save a file modified in the editor, I have an impossible to save the defined version (impossible to check the box). I have tried to fix my catalog and I reset the preferences of the Publisher without success. Does anyone have any suggestions?

    I have included the news system and a path:

    Organizer of items 8.0.0.0
    Basic version: 8.0 (20090905.r.605812)
    Language version: 8.0 (20090905.r.605812)

    Current catalog:
    Catalog name: elements
    Location of the catalog: K:/elements
    Size of the catalog: 206.8 MB
    Catalog Cache size: 1.6 GB

    System:
    Name of the operating system: XP
    Version of the operating system: 5.1 Service Pack 2
    System architecture: AMD CPU Family: 15 12: model step by step: 0 with MMX, SSE whole, SSE FP
    Built-in memory: 2 GB
    Free memory: 1.2 GB

    Important factors / plugins / libraries:
    Microsoft DirectX Version: 9.0
    Apple QuickTime Version: 7.10
    Adobe Reader Version: 9.1
    Adobe Acrobat version: Not installed

    CD and DVD players:
    C: (BUS PIONEER DVD - RW: 1 ID: 1 Firmware: DVR-108)

    File:

    K:\Elements\Elements\2009 10 11\

    Move all files and records except those containing photos, which I think are:

    Items (folder)

    More photos (folder)

  • Vista will install my game, but does not open it

    I try to install Superpower 2 and it gives me a message of compatibility that this game can only runs under windows ME / XP 2003 server. Is there something else that you try to run the game as administrator, because it does not work

    I have patched the game and followed your instructions, and he started upward.  Thank you...

  • Game Center does not

    application: Game Center iOS / version: 9.3 currently (summer happening for awhile (several versions))

    When I use the Game Center, I get is a white screen, I tried signing in in the settings but everytime I hit Game Center when I'm in the settings it freezes the app settings that has happened for a long time, even after the update to 9.3 once I updated to 9.3 I went directly to gamecenter and it worked! For about 5 seconds then became unresponsive so I closed the application and returned and now it's back to how it was before.

    I have a solution that worked! It does not require a restore but its worth it!

    I had this problem and I contacted Apple support and they told me that I had to go back to the top of my iDevice, then you erase content and settings, BUT instead restore backup right after, you should instead put in place the unit as new and connect to gamecentre. After logging in to gamecentre and ensuring that its work, you can then restore your backup. Voila, gamecentre works like a charm after restoring your backup.

    In a Word; You can 1) erase all content and settings 2) configuration as new 3) sign in gamecenter and make sure it works 4) restore from backup and test on.

    The way it works, find it me when we put in place as a new apple id is trying to establish a fresh connection with gamecenter. Once this new connection is then gamecenter is this apple id to read all over again. That's why we want to do as a new device first. Then when restore us backup gamecenter still remember the last connection. You can then restore your backup, and the unit reads the good link that you previously had with the apple ID. Worked for me and I hope this helps.

  • Dv5 does not load Vista, failing hard drive test

    I have a laptop HP DV5 with Vista - 2 years and more under warranty.  He had some problems with Windows Update error codes, I did a system restore to a point a little backward.  This does not solve the problem, so I tried to cancel restoring the system back to the State of our days.  This was fine, but then the system locked up when he tried to restart itself-it has attempted to restart for 45 minutes and got nowhere, so I turned off.  This throw Windows completely, as the system restore was not full yet, so now that my computer will boot the HP logo and start up options, but then get hung up trying to load windows (I have a black screen with a scroll bar down cycles endlessly with Microsoft Corporation written below)

    Bottom line - I can't get the computer to boot windows, and system recovery does not work.  Tried directly from the hard drive and vain and ordered HP-put one disk disks this morning, once removed from the HP screen, I get the bar "Windows loading files" at the bottom, which ends in about a minute, but then it just goes back to its normal load upward, with the scroll bar and Microsoft Corporation at the bottom of the screen.  So I can't open basically even the system restore window.

    I just ran the self-test of the primary hard drive and had hard disk Test do not.  I'm not particularly computer saavy (I didn't know that to do this test in reading this forum), if anyone can tell me what I should do next?  I don't want to go somewhere and get screwed!

    Thank you!

    -Becky

    Hi Becky,

    The result of the primary Hard Drive Self Test means your hard drive is defective and must be replaced.  It is the HARD drive in my dv5.

    http://www.Amazon.co.UK/320GB-Scorpio-WD3200BEVT-SATA-5400rpm/DP/B0013E0A0M

    Hard drive replacement is not difficult (generally remove two screws from the cover of the HARD drive on the bottom of your laptop, remove a futher two screws holding the disc in place then pulling on one leg to lift the reader.  Then unscrew the metal casing around your old drive - often called the caddy drive - attaching to your new drive, insert the new drive, fix it with two screws and replace the cover.  Then simply insert your recovery DVDs to load Vista on your new drive.  Here is a Youtube video showing this.

    http://www.YouTube.com/watch?v=8U23F8JuKKE

    I hope this helps.

    Best wishes

    DP - K

  • Game Aion does not

    I am registered to play the beta of Aion, but the game does not work.  Everything installed properly and the game is there, but once I sign in the game it is said immediately does not not in the Task Manager.  I already contacted support game and based on my computer software and hardware of the game must be running.  I don't know that it's a problem I don't understand in vista because I have had this problem before and had to buy the vista version of some games like final fantasy 11.  Aion is a new game, so it is not a compatibility problem.  What can I do to start my game?

    Tentsu

    Hello Tentsu,

    Thank you for the feedback.  I have noticed your video card and acknowledge it as one types that has a recall notice issued for manufacturer defects.  If your card is this possible defect then you need company to replace if it is still under warranty.  You can contact Nvidia or search for nvidia 6800 defects or withdrawals.  A friend of mine had this problem with its 6800's, and I have them both replaced by 2 new 9800.  I don't make promises that you'll get something for free, but I strongly suggest that you look in that it is a known problem with the 6800 cards.

    Please let me know if this helps you.

  • Does not work Vista startup repair cannot repair, System Restore cannot repair.

    I have a Dell Inspiron with Windows Vista. On commissioning, it is said: "Windows could not start. A recent hardware or software change might be the cause. "then offer to 'Launch Startup Repair' or 'start Windows normally '.

    When asked to boot normally, it tries to start, but broken, return back to this page.
    When he was asked to run the Startup Repair, it opens the program scans the system for several minutes and then says "Startup Repair cannot repair this computer automatically.

    When we click on diagnostics and repair details, it is said:

    "Last startup successfully: 03/10/2011 15:42:52.
    Number of repair attempts: 8

    Details of the session
    Drive system = \Device\Harddisk
    Windows directory = C:\Windows
    AutoChk run = 0
    Number of root causes = 1

    The test is performed:
    Name: Search for updates
    Result: Completed successfully. Error code = 0 x 0
    Name: Drive for System Test
    Result: Completed successfully. Error code = 0 x 0
    Name: Troubleshooting disk
    Result: Completed successfully. Error code = 0 x 0
    Name: Metadata for the drive Test
    Result: Completed successfully. Error code = 0 x 0
    Name: Target OS Test
    Result: Completed successfully. Error code = 0 x 0
    Name: Checking content Volume
    Result: Completed successfully. Error code = 0 x 0
    Name: Diagnostic Boot manager
    Result: Completed successfully. Error code = 0 x 0
    Name: Diagnosis of the system startup log
    Result: Completed successfully. Error code = 0 x 0
    Name: event log diagnosis
    Result: Completed successfully. Error code = 0 x 0
    Rated: Internal audit of State
    Result: Completed successfully. Error code = 0 x 0

    Root cause found:
    Startup Repair tried several times but still not determine the cause of the problem. »

    If not, we can look at the advanced settings:
    System Restore = "no restore point created the disk of your computer system. To create a restore point open System Protection.
    Windows complete PC Restore = "a valid backup location is not found. Windows cannot find a backup on this computer. »
    = Windows Memory Diagnostic tool does not solve anything when parsing
    Command prompt
    Reference Dell Factory Image Restore = not tried but am avoiding wiping all your own hard drive for as long as possible...

    He's not in Mode safe, and I don't know what is happening. It happened when I shut it down (holding the power button down) update that it had frozen.
    What should I do? Thank you.

    Hello

    Method 1: I suggest that you do the startup repair using the Windows Vista installation disc and check if it works.

    If you have a Windows Vista installation disc, you need to restart (boot) your computer using the installation disc. If you do not restart your computer from the disk, the option to repair your computer will not appear.

    a. Insert the installation disc.

    b. restart your computer.

    Click the Start button, click the arrow next to the button lock and then click on restart.

    c. If prompted, press any key to start Windows from the installation disc.

    Note: If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer. You may need to change your computer's BIOS settings. For more information, see BIOS: frequently asked questions.

    d. choose your language settings, and then click Next.

    e. click on repair your computer.

    f. Select the operating system you want to repair, and then click Next.

    g. in the System Recovery Options menu, click Startup Repair.

    See: How can I fix a startup (startup)?

    http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-fix-a-boot-startup-problem

    Method 2: If above method fails, then run the command chkdsk WinRE (Windows Recovery Environment) and check if it solves the problem:

    http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

    Note: Select command prompt from the system recovery options and follow the mentioned below as follows:

    Type the following command and press ENTER.

    Chkdsk /r

    Note: Chkdsk /r command erases / corrupted hard disk data corrections. Some of your personal files/data may be erased.

  • Talk-back does not work for AutoComplete in firefox

    In my site, I used the features auto for the suburbs and I want to implement accessibility in my web site. When you view the website on a mobile in android accessibility mode I'm not able to reach the underside using Talk Back

    1 talkback does not read the values in drop-down list in the autocpmplete
    2. I'm not able to select any value in the menu dropdown.

    How you code the AutoComplete? Get to the States and properties such as I describe in this blog post? Or at least something similar? In addition, it is important that you insert the semi-auto items near the actual entrance, not at the end of the document, insofar as the screen reader will always use the HTML order, not the generated CSS visual layout.

  • go back does not work

    By clicking on the back arrow does not take me back to the previous screen, instead the screen remains current.

    Seems the visited state if you open links in a new tab with a middle click with the mouse wheel?

  • Game Center does not load, block the phone.

    Hello, I have an iPhone with the latest OS 9.2.1 6. This month I had problems with Game Center works not at all. I did the following to try to fix it without success:

    -Hard reboot the iPhone in now the home button and the power button.

    -Signed on iCloud and back in.

    -Reset the settings.

    -Make sure the OS and applications are up to date.

    -Do of course, I had enough room on the iCloud.

    Unfortunately, none of them have worked, and I'm stuck to the extent where what to do. This is the first time I had a problem with my phone. I have a few games on my phone that requires a connection to the iCloud for them to remember your progress. I tried to activate Game Center of the app icon and settings. It freezes the phone and I have to restart.

    If anyone has a solution for this, I'd be in your debt.

    Go back to iTunes

    Restore the device as NEW

    If the problem is solved - restore backup

  • Satellite P300D-15O - display drivers does not-XP/Vista

    Hi all

    After buying this Satellite P300D-15O tried several times the reinstallation of operating systems: Windows XP Pro, Windows Vista x 32 and x 64 version, but does not display drivers offered by Toshiba downloads: it runs only the Windows standard vga drivers after you have installed and not working drivers for AMD/ATI HD3470.

    Max resolution is 1152 x 864. The laptop has been pre-installed with Vista Home Premium and good work and resolution of 1440 x 900 ATI drivers; but I want a new installation on my own without any addition of pre-installed software from McAfee/Google etc - The Toshiba telephone Customer Service can't help for this problem, they have NO answer, :(! Is there a solution with the inf files? Can anyone help!

    THX, endo

    Hello

    In my opinion, make you a huge mistake. Laptop with factory settings is perfect set up and all hardware components are working properly. OK, I understand you don't want to use some additional preinstalled software, but you must understand that you don't have to do it.

    I have absolutely the same option about it than you and the first thing I did with my Satellite P200D is to remove all the software, I don't want to have installed on the system.

    You can do the same thing. Go to the control panel > programs and features and then remove all the additional software. Later, install your favorite software and be happy with it.
    I do the same thing. Why install OS Vista own especially if you ve already paid for a Vista license.

    What do you think of this?

Maybe you are looking for