Games with big screen

I have a presario A 900 and vista of runing am I can only open games in a window full screen with two black bars down the flanks is it possible to change this? My computer is running in 1440 x 900, but my games don't fit widescreen. The size of the game window is also affected by changes in resolution in the game.

As a response to this, the computer loses its large screen and I see the two black bars on the sides, that's without change, but I found the solution. I removed the boundries I have for my screen so everything can adapt to this topic. By removing these limits that zooms from my office in 20-30%, allowing to me manupulate all my windows that normally do not change. So by removing the boundries I can play the game as an image in the image display as well as a normal Internet window I can stretch the game to specfic size I want and leave it like that so that it covers the entire screen. Thanks for your help

Tags: Windows

Similar Questions

  • Qosmio F10-121, while the splash screen gets scratched with big purple bands

    Hello!

    Suddenly, I had a problem with my Qosmio. Maybe someone could help me.
    When I turn on my computer, the Qosmio logo appears (its ok) and then the Windows logo. But that's the problem, my screen becomes striped with big purple bands. I can't do anything, it's completely unreadable... Windows cannot be loaded, the Qosmio PIF and restart.

    When I plug in an external display, it's the same thing.
    I tried to use the restore DVD, but for the moment, it doesn't change anything.
    I see 2 problems:
    -A video card problem (but Qosmio logo appears, and the restore DVD menus are normal
    -A big failure of HARD drive (when I plug the SD of the internal Qosmio on my other computer, it is very, very slow, and suddenly, HDD disappears)
    So, if you have any advice...

    Thanks a lot for your answers and do not look at the faults.
    Eric

    I bought my laptop 5 years ago and after a week, the motherboard has been replaced. But since then, it works like a dream. Never had any problems.
    As you can see that computers are devices of high technologies and every time something might be broken.
    I think that the laptop should be checked by a technician with experience for laptop

  • Monitor flickers through a game or with large screen

    flashing sceen

    After an hour, maybe my monitor will start to
    Flash games to the big screen as small green words Word it was working fine until windows low current charge my montor is a dell e2074 fp vided card is nvidia nforce 7300 agp bus

    I can only imagine as an update for your video driver
    can cause this problem.

    No guarantee... but it can be interesting to try to make a
    Restore the system to an hour before the beginning of the question.

    Windows Vista - system restore: frequently asked questions
    http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

    Using Windows 7 or Vista System Restore
    http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  • How to do a zoo tycoon 2 big screen

    I searched the internet trying to find out how to make my 2 fill game zoo tycoon ultimate collection the screen! I tried to change the resolution in the game and via the options of the computer, but nothing works. We thought one of the hotfixes can be manipulated, but my version of the game is 33 something, and the task is apparently already installed (colonel Ultimate I guess)

    I know that we must work in a way such as;
    (A) my friend has the same res screen than I (1366 x 768) and his works perfectly
    (B) it worked when I got the base game and ARE installed (which was well back in 2011)
    I have a laptop Dell studio 1555, res screen of 1366 x 768, windows 7 etc. My PC is in line with all the system requirements.
    I bought ultimate collection I lost my base game and had an expansion pack anyway. It used to be big screen and all over the internet people recommend the installation of the base only game and then fixing the problem, but I can't do that everything is installed at the same time.
    Well, I don't want to have the full screen, but the edge-scrolling does not work with the black bars on the side D:
    Any help? :)

    Hello

    1. have you updated any drivers in the computer?

    Run the following method and check if it helps.

    Method 1:

    You can also try to update the drivers to display the Device Manager and check later if the problem persists.

    Update the display driver card:

    a. click Start.
    b. in start search box, type devmgmt.msc , and then on enter.
    (c) in the Device Manager window, expand display adapter.
    d. right-click on the installed display adapter .
    e. click on Update driver software and select the option to search automatically for updated driver software.
    f. restart the computer after the update and check if the problem is resolved.

    See also:

    Updated a hardware driver that is not working properly

    http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

    Update drivers: recommended links

    http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links

    Hope this information is useful.

  • Firfox crashing when you run a game with original by Tridef 3d application

    I have a LG D2342 screen. This screen has 3d Support. I play Battlefield 3. The 3d is running through an application called Tridef 3d. When I start the game with the Tridef he begins to open Firefox, then the firefox would just stop responding and hangs. I love using firefox but currently I can't set it as my default because of this problem.

    Have you tried disabling hardware acceleration.

    • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.
  • Satellite Pro L20-someone ' one can tell me if I have a problem with the screen?

    Hello

    I have a Pro L20 - PSL25E and I recently had problems with the screen, it was intermittently flickering/lose color and whiting almost (when the color fades white vertical lines begin to appear).
    This seemed to worsen after that I dropped it (only from about 2 feet off the ground, not a big drop).

    I thought that the sceen can go, but the performance of the laptop seems to be affected when this happens, the laptop started to run very slow (tracks mouse slowly, programs I clicked take ages to run and it freezes sometimes to stop flashing) that had me thinking that it might be a virus or performance problem.

    My screen, drivers are updated, I did a full scan with McAfee, ran a clear-up system and a Defrag.

    I was wondering if anyone knew if it seemed to be a problem with the connections of the screen and would need replacement or if it could be repaired or if it were a performance problem?

    Any help would be great thank you appreciate!
    Rebecca.

    Looks like the graphics chip has a problem, which I think is a motherboard replacement.

    You can get a quote for repair to an authorized service provider. There is a list of ASP on the Toshiba site.

  • No big screen in Windows Media Center on Qosmio G10-133?

    Hello
    I just set up my Qosmio G10-133 to watch the TV via a set-top box Freeveiw. However in Windows Media Center, I can't see it on the big screen. If I veiw the same programe in the Toshiba drive I can veiw on the big screen OK.
    Any help with this would be much appreciated.
    Thanks in advance.

    Hello
    Can you please check in the BIOS settings if there is option called display stretching or something like that?

  • How can I stop iMovie 10.1.1 from my clips big screen media cultures when I move them to the component of the project (window)?

    I am currently creating a short reel demo/culmination of a feature-length independent full length on my iMac.  The format of independent film is on the big screen and it appears this way in the media window/pane.  But when I take leave of this wide screen support and move clips / add them to the window/pane project and strengthen so the demo highlights reel, clips no longer appear on the big screen - looks like the clips (proportions?) have been cut.

    How can I stop this from happening?

    Thank you!

    If you set 'Placement of Photo' in iMovie preferences to 'Fit' rather than 'Fill' (which I think may be the default) then all your video content will be visible, but you will have bars on it and if the aspect ratio is wider than 16:9.

    For clips already in a timeline, you can change the setting to 'Fit' with the crop tool:

    Geoff.

  • Satellite P20 S203 - where can I get the cover external big screen?

    Hi all

    Anyone know where to find an outer cover of the big screen Satellite P20 S203?

    I broke it because I disassembled all the pc some time ago, and as I can see now that I took out the black cover around the screen. I forgot to screw the 2 screws on the hinges that make it able to open and close. It is only broken on one of the screens, hinges, so the pc is still usable, with appropriate caution, I can still open and close, but sooner or later, I think that the other will be too broke, opening and closing of the screen all the time, so I have to replace it
    .
    Hope someone can help me.
    Good bye

    Hello

    I'm not sure what cover you mean exactly, but you can get all the spare parts to an authorized service provider. On the Toshiba page, you can find a list of them.

    You must only contact them by phone, for example. Explain the situation and maybe they can send you a new cover.

    Welcome them

  • Portege M200: big screen via the port replicator

    I have a Portege M200 with APR III. I realized that the DVI Jack does not work with it, even if for some reason any, even though they are not supposed to all other ports don't. EACH of them!

    What I'm asking today is how the hell can I get the laptop out on the big screen through the APR? I tried everything, it has the chipset nVidia go 5200 FX (which is able to output DVI according to nVidia)

    I just got a Philips 20 "widescreen TFT and got tired of watching her in the stretched standard resolutions.

    One of my friends has also Tosh lappy, but it's a Tecra 9100, which will be released on the big screen without any questions whatever it is standard, it appears as an option in the Billboard settins. In addition, nVidia say that this chipset is capable of custom resolutions, but I can't find it in the updated anywhere driver.

    Can anyone help?

    Hello

    Well the Tecra9100 is not a Portege M200. Are completely different books.
    The M200 protected does not support these interfaces.
    This is a technical limitation, that the port of mouse PS/2 keyboard PS/2 port, serial port, I Link (Firewire) port and DVI port
    will be not supported on the Advanced Port Replicator III, if a protected M200 is moored.

    The following ports are supported and can be used:
    Line-in Jack, taken Line-out, USB port, port external monitor, parallel port, taken Modem, LAN jack, DC IN 15V, housing for security lock, locking the computer.
    In the documentation for the Advanced Port Replicator III is a 'fact sheet for III Advanced Port Replicator"sheet where this limitation is descripted.

  • Windows 7 does not show the game in full screen...

    I had windows Vista Home Basic Edition and we showed all of the games in full screen. Know that I gave full seven windows, which do not show any game in full screen and what I can do?
    Thanks for any response.

    Hello

    If you would please provide details on the game you play?  Also, have you tried to hit F11 and attempt to place the game in Mode full-screen.  In addition, check with the OEM of the game to check if there was an options in the game to use Mode full screen.  I hope that this information is beneficial.

    Thank you

    Aaron
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

  • Error: "a copy of the game Manager is already running & may not respond. Please end-game manager & reboot computer. "when tried to open the game Manager, big fish games or applications

    Original title: http://www.bigfishgames.com/usher/index.php?siteID=1&langid=1__application not found

    When I try to open game from big fish games or the game Manager application, I get this error.  only, this started about 1 month ago.  before that, I had no problem with the application at all.  I also got the message: "a copy of the game Manager is already running & may not respond.  Please end-game manager & reboot. "even if there is nothing running.

    Hi nanawanda,

    According to the error message, try the following steps and check the result.
    Step 1: End game Manager and restart the computer.
    Step 2: Start the game Manager and check if the problem persists.

    See What is the Manager of games?
    http://bigfishgames.custhelp.com/app/answers/detail/A_ID/157/related/1/c/2805/page/2/r_id/109674

    If the problem persists, post your query to the Big Fish Games Forums:
    http://forums.bigfishgames.com/forums/list.page

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Acer XB270HU ULMB problem with my screen, or maybe drivers? Baffled

    Greetings!  I bought this XB270HU this month and I love it.  It seems that G-Sync works like a charm, and this 144 Hz refresh rate is wonderful.  There is some bleed slightly at the top left which can be seen with black bars around some videos, but never in the videos themselves.  Considering that it is the only way he can be spotted, I thought I finally found a BIG screen.  My old one was a Dell S2440L, who had an exceptional contrast and zero bleeding, but had problems massive overdrive.

    While everything happens very, I chose to use ULMB sparingly because it bothered my eyes the first time I tried it, although the screen visibly drive doesn't bother me.  For the record, this monitor is the one that supports ULMB at 120 Hz and if you try to activate at 144 Hz, the monitor starts flashing a message saying it cannot be used to 85 100 and 120 Hz.  Thus, it * is * working at 120 Hz.  I'm sure I can have used experience of nvidia GeForce update graphics drivers at least twice by habit, and Windows Update installed a XB270HU driver as well.  Recently, I went to turn on ULMB at 120 Hz for use with a movie and was shocked to see that the screen got * best * instead of gradation.  I chose 85 and 100 Hz to see, and it lit up as well, for the same settings.  I don't really understand what happened, but it feels as if its not even using ULMB.  Since it worked well and all of a sudden is not, is it a driver problem to an update or something go haywire inside the screen?  I've never fiddled with something other than the brightness levels.  I have the 144 Hz Gsync mode at 50% brightness instead of the 36 percent that I had it before and when I turn ULMB 30% brightness, it seems much brighter than it does now.  I find it incredibly strange and hoped someone could we help with that or help me fix.

    Some features:

    8.1 Windows 64-bit (update to 10 soon)

    Intel Core i7 - 3770K @ 4.4 Ghz

    ASUS Maximus V formula BIOS 1903

    Memory of 16GB (8GBx2) DDR3-2133 G.Skill RipJaws X series

    eVGA GeForce GTX 980 Ti SC + ACX 2.0

    Using the DisplayPort cable supplied with the monitor yet.

    Acheron,

    MP received, thank you.

  • Why my computer displays a white screen when I try to see a game mode full screen?

    whenever I try to view a game in full screen, my screen becomes white

    Salvation of the knee-c,

    1. Did you the latest changes on the computer?
    2. Are you experiencing a similar problem with several games on the computer?
    3. When was the last time it was working fine?
    4. You receive an error message?
    5. You have security software installed on the computer?

    Method 1

    I suggest that reduce you the hardware acceleration on your computer and check if it helps.

    (a) click Start, click Run, type desk.cpl, and then click OK.

    (b) click on the settings tab and then click Advanced.

    (c) in the performance tab or on the Troubleshooting tab, and then move the Hardware Acceleration slider to the left.

    (d) click OKand then click close.

    (e) If you are prompted to restart your computer, click Yes.

     Method 2

    If the previous step fails then I would suggest that you manually download and install the updated on the computer graphics card drivers by visiting the adapter or the computer manufacturer's website and check, if it helps.

    How to manage devices in Windows XP

    http://support.Microsoft.com/kb/283658

  • I'll be able to watch TV as well as the registered on my big screen?

    Watch tv

    IAM hang a HPLaptop my big screen HDTV with a vga to hdmi, also, I hooked a 950q of Hauppauge TV Tuner to the laptop. My question is that I'll be able to watch television and recorded shows on my big screen with this set up

    Technically, I don't see why not.  The cpomputer is essentially now a great passage by DVR device, although probably overvalued. ;-)

    The Hauppauge WinTV-HVR - 950Q (what specific model - model 01191, model 01176, model 0283?) allows you to watch and record TV, in a window or full screen. You can use the WinTV-Scheduler to record your favorite analog or digital TV shows using high quality MPEG-2. You can read your TV recordings to your screen any time.

    Your laptop, if you get it to display on HDTV, will deal with just the external screen as another monitor, and you can put whatever you want on it...  Including the output of the Hauppauge WinTV-HVR - 950 Q or his records.

Maybe you are looking for