generate the path inside the contour line.

Similar Questions

• Pixel blur on the contour lines

  Hi all

  I have a problem with the clarity of the lines used to space copy

  It's just literally a line with a race of 1px.

  some lines are perfectly clear, where as others are blurry...

  not sure why this is happening?

  

  This is the only screenshot I can capture...

  Tim

  Hi Tim,.

  You get the blurred lines because they are not positioned exactly on the pixel grid.

  When a 1 pixel wide line (or in InDesign 1 pt, which is the same) falls between the pixels, it is anti-aliased when converting to a bitmap and grayscale are introduced. Anti-aliasing is nice for the type and the curves, but not for horizontal or vertical lines. If the line is positioned exactly on the pixel grid, it would be a strong stroke of 1 pixel width.

  What you might want in InDesign to avoid this problem is a "align and Snap to Pixel Grid" like Illustrator has.

  You can ask it here:

  https://www.Adobe.com/cfusion/mmForm/index.cfm?name=wishform

  In the meantime, try this for new documents designed for tablets:

  Create a new document with the dimensions in pixels of your tablet.

  Go to preferences, then select grids

  For the grid of the Document, enter the same amount for horizontal, vertical and subdivisions. I got 100 in all these boxes.

  This creates a grid of pixels a pixelwide.

  In InDesign, go to the view menu and select grids & Guides: see the grid of the Document (you can turn off later) and snap to Document grid.

  This will cause your lines to line up on the grid, but they will not be positioned on the pixel, but between the pixels because by default, the line is aligned to the center of the lines. They line up on the grid lines and cover half a pixel on each side of the line. This will give you lines of Ant-aliasing you blurred.

  To avoid this problem, make sure that you do not have anything selected and go to the window/contour.

  Click the line Align / Align race icon inside (or outside) If you prefer.

  This will cause all the lines and boxes falling exactly on the pixel grid.

  Save the document as a template in InDesign and use in the future to avoid the blurred lines.

  On the far left lines that are exactly on the grid of pixels and next to them, the lines that fall between pixels. On the right the bitmaps that results.

  

  Kind regards

  Tone

• Generate the missing lines in analytics

  Hello
  
  I have a table with minute PR. measures 0-x.
  If a minute do NOT have a measure, then he should take the next minute measurement data.
  
  The results are averages in an interval of 15 minutes - or using the last 15 averages.
  
  It's my data
  

  drop table jlt_maaling;
  create table jlt_maaling (id number, dato date, vaerdi number, whoknows number);
  
  insert into jlt_maaling values (13111,to_date('15.09.2011 10:00:54','dd.mm.yyyy hh24:mi:ss'),1461,1);  
  insert into jlt_maaling values (13111,to_date('15.09.2011 10:01:14','dd.mm.yyyy hh24:mi:ss'),1462,1);   
  insert into jlt_maaling values (13111,to_date('15.09.2011 10:01:54','dd.mm.yyyy hh24:mi:ss'),1464,1);
  insert into jlt_maaling values (13111,to_date('15.09.2011 10:02:31','dd.mm.yyyy hh24:mi:ss'),1457,1);  
  insert into jlt_maaling values (13111,to_date('15.09.2011 10:03:54','dd.mm.yyyy hh24:mi:ss'),1459,1); 
  insert into jlt_maaling values (13111,to_date('15.09.2011 10:04:54','dd.mm.yyyy hh24:mi:ss'),1464,1); 
  insert into jlt_maaling values (13111,to_date('15.09.2011 10:05:54','dd.mm.yyyy hh24:mi:ss'),1463,1);
  insert into jlt_maaling values (13111,to_date('15.09.2011 10:05:55','dd.mm.yyyy hh24:mi:ss'),1467,1);
  insert into jlt_maaling values (13111,to_date('15.09.2011 10:05:56','dd.mm.yyyy hh24:mi:ss'),1464,1);
  insert into jlt_maaling values (13111,to_date('15.09.2011 10:05:58','dd.mm.yyyy hh24:mi:ss'),1460,1);
  --- how do I  "generate" data for the next 3 minutes  inflight?
  --10.06
  --10.07
  --10.08
  ---- arggh
  insert into jlt_maaling values (13111,to_date('15.09.2011 10:09:54','dd.mm.yyyy hh24:mi:ss'),1482,1); 
  insert into jlt_maaling values (13111,to_date('15.09.2011 10:10:54','dd.mm.yyyy hh24:mi:ss'),1479,1); 
  insert into jlt_maaling values (13111,to_date('15.09.2011 10:11:54','dd.mm.yyyy hh24:mi:ss'),1466,1); 
  insert into jlt_maaling values (13111,to_date('15.09.2011 10:12:24','dd.mm.yyyy hh24:mi:ss'),1474,1); 
  insert into jlt_maaling values (13111,to_date('15.09.2011 10:12:54','dd.mm.yyyy hh24:mi:ss'),0,1);
  insert into jlt_maaling values (13111,to_date('15.09.2011 10:13:05','dd.mm.yyyy hh24:mi:ss'),1474,1); 
  insert into jlt_maaling values (13111,to_date('15.09.2011 10:13:17','dd.mm.yyyy hh24:mi:ss'),1476,1);
  insert into jlt_maaling values (13111,to_date('15.09.2011 10:13:25','dd.mm.yyyy hh24:mi:ss'),1480,1);
  insert into jlt_maaling values (13111,to_date('15.09.2011 10:13:54','dd.mm.yyyy hh24:mi:ss'),1471,1);
  insert into jlt_maaling values (13111,to_date('15.09.2011 10:13:59','dd.mm.yyyy hh24:mi:ss'),1471,1);
  --10.14
  commit;
  
  
  
  with maalinger as
  (
  select trunc(dato,'mi') dato, sum(vaerdi) , count(vaerdi), sum(vaerdi)/count(vaerdi) vaerdi
  from jlt_maaling
  group by trunc(dato,'mi')
  order by 1
  ),
  tider as
  (
  --select trunc(sysdate+(level/24/60),'mi')-(1/24/60) datoo from dual connect by level <= 15
  select trunc(to_date('15.09.2011 10:00:54','dd.mm.yyyy hh24:mi:ss')+(level/24/60)-(1/24/60),'mi') datoo from dual connect by level <= 15
  )
  ---
  select datoo, vaerdi,
  trunc(avg(vaerdi) over (order by dato)) runningtotal_avg,   --- snit fra start og til hvor vi er nu
  trunc(avg(vaerdi) over (order by dato rows 14 preceding)) running15_avg,    --- snit for de seneste 15 rækker
  trunc(avg(vaerdi) over (order by dato range between  interval '899' second preceding and current row)) running15min_avg  ---- summen for de seneste 15 minutters rækker
  from maalinger m right outer join tider t on t.datoo = m.dato
  order by datoo;

  I have now the lack of lines not attached in French - but that contains no data in the veaeri column... it should contain the data from the next moment...
  If anyone can help?
  
  UPS has forgotten - database is 10.2.0.4
  
  Best regards
  Mette
  
  Edited by: Mettemusens2 2011-10-07 03:26
  
  Edited by: Mettemusens2 2011-10-07 03:38

  And here's a way that gives what you ask (or almost):

  with minutter as (
     select min_dato + numtodsinterval(level-1,'minute') dato
     from (
        select trunc(max(dato),'mi') max_dato, trunc(min(dato),'mi') min_dato
        from jlt_maaling
     )
     connect by level <= ceil((max_dato - min_dato) * 24 * 60) + 1
  )
  select
  nvl(jlt_maaling.dato,minutter.dato) dato,
  last_value(jlt_maaling.vaerdi ignore nulls) over (order by minutter.dato) vaerdi
  from minutter
  left outer join jlt_maaling
     on trunc(jlt_maaling.dato,'mi') = minutter.dato
  order by
  minutter.dato,
  jlt_maaling.dato
  ;
  

  Then you can make this request group.

  It will work when you do it on an individual 'id '. For a solution that partitions by 'id', you can do a partitioned outer join.

• What is the difference between object > contour line, Object > expand... and oppose > Compound Path/do?

  Could someone explain the differences between these three commands? I created a circle with a stroke, applied all the three commands and ended up with the same thing, a compound path. Are there situations where this is not the case, or situations where one of these commands is more appropriate?

  Cleveland,

  In the case of the accident vascular cerebral/nofill right, object > describe vascular accidents, cerebral and object > expand seem to do the same thing.

  In the layers palette, you can see three different results to develop if you have so much background and outline ticked, ticked off just about fill, and only STROKE checked. Only the last corresponds to the contour line.

  You use Outline Stroke that more simple if it's what you need. Trace to create something with one or more holes of several paths, either to raise subsidized the Clipping Path of a clipping mask paths. Expand is for the rest.

• Contour line produce unwanted results

  Hello!

  Can anyone tell why this is happening and how I can avoid it without changing the path? (see attachment before/after images)

  

  Thank you to.

  Rune

  It is a product of the contour line. Use Pathfinder > unite for the difficulty

  

  You can have a few stray points, I have chosen them so that you don't forget to select and delete.

• Impossible to uninstall a program error: unable to generate the uninstaller for ca aintivirus E9030 command line.

  Original title: impossible to uninstall the program error msg

  I'm unable to uninstall a program, an error message keeps popping up saying "error E9030 cannot generate the uninstaller for ca aintivirus command line.
  can anyone help?

  Original title: impossible to uninstall the program error msg

  I'm unable to uninstall a program, an error message keeps popping up saying "error E9030 cannot generate the uninstaller for ca aintivirus command line.
  can anyone help?

  Try this... no guarantee

  Start > computer > open C: drive > open the Progran files > y at - it a record of the Ca antivirus?
  If so, open it > is there a uninstaller.exe file here?
  If so, open it and let go about uninstalling.

  Or,

  Start > all programs > CA antivirus > y at - it an option to uninstall?

  Hope one of these AIDS.

• Is there a way to generate a report via the command-line script or groovy?

  I would like the option to generate a report (for example, model "Host physical load summary") from the command line, where I will provide the settings he needs.   Is there a way to do in groovy?

  Okay, maybe this constant is not declared in 5.5.8.2 yet. Just replace-1

• Archives generate the different path compared with the path mentioned in LOG_ARCHIVE_DEST_1

  Hi all

  I have 2 Installation RAC + ASM from the node. Here, I found that generate the archives on the different path compared to the path mentioned in log_archive_dest_1.

  O/P to the list of archive logs:

  Database log mode	Fashion Archive
  Automatic archiving	Activated
  Destination of archive	+ ORAARCH

  Sequence of journal online oldest 2307

  Log sequence archive 2309

  Current log sequence

  2309

  Archives to generate the path are: (to 17 July 2015)

  + ORAARCH, ABCDB, ARCHIVELOG, 2015_07_17

  Please guide why such difference?

  Destination of archive

  + ORAARCH

  Above location is diskgroup name in ASM (OMF), all files created in the DISKGROUP/DBNAME/FILETYPE format.

  2015_07_17 is the DATE of generation of the Archive.

• I'm trying to sign several documents and I have my saved signature under "fill & sign" the organization that generated the forms highlighted the signature lines and when I try to put my signature, it is pushed outside the signature.

  I'm trying to sign several documents and I have my saved signature under "fill & sign" the organization that generated the forms highlighted the signature lines and when I try to put my signature, it is pushed outside the signature.

  Hi katepell,

  You can simply drag the signature to the desired place by holding it with the mouse.

  Thank you

  Abhishek

• Is there a way to make the vector lines (Path) more Visible in Photoshop CC on OSX?

  Is there a way to make the vector lines (Path) more Visible in Photoshop CC on OSX? Just passed from the CS6 in the CC, and it is very difficult to see when they are in fact seen visible.

  Apart from excellent advice from Terri, there is no way to really change how the paths appear - nevermind, I could use those more visible as well.

• I'm getting white gaps between the black contour lines and color fill on laser printer

  I'm getting white gaps between the black contour lines and color fill on laser printer

  You're welcome, Calotypist.

  Illy prefer PostScript because it gives you a reliable/complete (more) reproduction (depending on the version, you can also see (more) complete print failure).

  With a PDF basically tell you the printer where to put the points/tasks. Without it, the printer (pilot) has to figure (some) outside.

  If you can get one for the printer in question, a printer PostScript (emulation) driver will leave you direct printing.

• Remove the first line xml generated xml to VO

  I am combining multiple xml files to generate the report using BIPublisher. I generated xml based on a VO by using VO.writeXML. How can I remove first row (<? xml version = "1.0"? >) in the xml file?

  Use the transformer and setOutputProperty to omit the first line.

  Transformer transformer = TransformerFactory.newInstance () .newTransformer ();
  transformer.setOutputProperty (OutputKeys.OMIT_XML_DECLARATION, 'yes');

  Edited by: Puthanampatti Dec. 6 2012 18:42

• How to generate PDF and CHM of the command line files in windows?

  I'm trying to set up a PC to build certain documents during the night. I was looking for a way to get from framemaker to generate PDF and CHM files through a command line in windows? How this is done with FrameMaker 12

  Thanks for the help

  Alex

  I have the pdf part of this work now. Make a jsx which generates the PDF file via the doc. Save(). And when the pdf file is generated the script then shut down of FrameMaker via the application. Close method.

  I then just copy the script in FrameMaker autorun dir and start FrameMaker to get the pdf genenerated.

  Now, I'm trying to do something with the chm filegeneration. But I can't find anything on how to get FrameMaker to make the extend script CHM files. Is there anyone who have some good places to look for that?

  Thanks for the help

  Alex

• New path-layers of all lines with the tool pen?

  Hello! I am currently using Illustrator CS6 as a test version, and when I use the tool pen to make a beaver (school work), it all end in a single layer. I want to have a new layer-path of each line with the pen tool, so I can remove rows from the layer panel too. For the moment, it's a layer that has a picture of a beaver, and I can't see the individual lines that I drew. When I used CS5 recently I had no such problem.

  There is a setting that I can change or does have something to do with the news of CS6?

  If you want to see a 'sex' for each object changes the display of the layer panel by choosing Options from the Panel menu in the layer panel. In the lower part of the Panel options window, make sure that groups and objects are both checked. You will then see a 'sex' for each object.

  I quote 'sex' here because technically they aren't the layers. They resemble layers and are in the layer panel, but they do not exactly allow options that allow actual layers. You can select and move objects in the Panel this way however.

• Generate the lines duplicated when running report script

  Hello
  
  The following script report works very well. But it generates the double set of lines.
  
  * {TabDelim} {ROWREPEAT} {SUPMISSINGROWS} {SUPHEADING} *.
  
  * < Page (HSP_Rates, YEAR, SCRIPT, VERSION, CURRENCY) *.
  HSP_InputValue Fy11 Budget WORK Local
  
  * < COLUMN (PERIOD) *.
  * < DIMBOTTOM PERIOD *.
  
  * < ROW (ENTITY, ACCOUNT) *.
  * < DIMBOTTOM ENTITY *.
  * < DESCENDANTS "NET INCOME."
  !
  OUTPUT:
  HSP_InputValue FY11 EXERCISE WORK Local
  ENTITY1 100 GROSS INCOME
  TAX ENTITY1 10
  ENTITY1 100 GROSS INCOME
  TAX ENTITY1 10
  
  Help, please.

  Probably, you have several hierarchies / shared members in the dimension of your entity or account. Try to use

  Moreover, I think that you edited your post but initially mentioned trying to remove 'ROWREPEAT '. Just ROWREPEAT determines if consecutive lines with the same Member of a dimension displayed the name of the Member several times, or on the first line of the group only.