Cannot assign an average property weighed for a custom period dimension

Similar Questions

• Generate the report for the custom period

  I did experiment with Foglight NMS for the past few weeks. I have search in the forums and hunts around the tool, but I've not found a way to generate a report on a custom period. For example, I would like to run a report, see use of bandwidth during opening hours. The only options I see is "last hour", "Last day", "Last week", etc. "." Is this possible? Any help or ideas would be appreciated.

  Hi Michael,

  While we do not have a report which shows the range you're looking for, you can see the use of bandwidth via NetFlow. I know it is not a report, but could be able to show the amount of data sent over the network for a period of time. Lies and must have the feature seen on the road map.

  Mario

• 3407: cannot allocate space to store the property information for global cache

  Salvation of the experts on the issue of a load in ttisql as follows, statement
  
  CACHE LOAD domain_group GROUP COMMIT ALL 256 LINES;
  
  This exception is thrown, and I can't find anything with google:
  
  3407: cannot allocate space to store the property information for the global cache groups because the space in the partition of the temporary data is less than the minimum threshold of 3000000 bytes--of the Member MG2_alone2_1 of the grid
  
  My my_ttdb DSN is configed as follows:
  [my_ttdb]
  Driver=/home/TimesTen/TimesTen/tt1122/lib/libtten.so
  Data store = / home/timesten/data/database / my_ttdb
  LogDir = / home/timesten/logs
  PermSize = 4000
  TempSize = 32
  DatabaseCharacterSet = AL32UTF8
  OracleNetServiceName = amq_915
  
  The result of cachegroups is:
  
  Group cache CACHEUSER. DOMAIN_GROUP:
  
  Group cache type: asynchronous, Writethrough global (dynamic)
  AutoRefresh: No.
  Breeding: LRU on
  
  Table roots: GTLD_WHOIS_TEST. GTLD_DOMAIN
  Type of table: spread
  
  
  Child table: GTLD_WHOIS_TEST. GTLD_DOMAIN_STATUS
  Type of table: spread
  
  The County of gtld_domain table is 3,005 million records in the gtld_domain_status table.
  
  Waiting for your help, thank you.

  According to the error message you need to increase the temporary data partition which is the TempSize setting in your DSN.

  As point of departure set to 1000 and then to monitor it in ttIsql with the dssize command to see if it needs to raise more or may be reduced after a workload has been run.

  Tim

• Error ESTK "cannot assign a value.

  Dear friends, started a new project - and of course the new problems:.

  The SumOf (list of values) function works perfectly,

  but an equivalent of the function VsumOf (list of variables) stops at line 16 in the first iteration of the loop: cannot assign a value.

  At this point, the result variable is just - 132.09 - out sort of a numerical problem.

  var z = SumOf (11.1, -11.9, 12345679.0, -12345679.0, 124.5, -17, 18.9, 2.2, 2.5, 2.5, 2.5, 31.31, 312345679, -312345679); 
  alert ("SumOf the numbers = " + z); // giving 166.610000014305  (figures after the 000 are artifacts)
  
  var z = VsumOf (11.1, -11.9, 12345679.0, -12345679.0, 124.5, -17, 18.9, 2.2, 2.5, 2.5, 2.5, 31.31, 312345679, -312345679); 
  alert ("VsumOf the numbers = " + z);
  
  function VsumOf (valuePairs) {
    var nArguments = arguments.length;
    var j, z, result = 0;
    if (Math.floor(nArguments/2) * 2 !== nArguments) {return undefined;}
    
    for (j = 0; j < nArguments; j=++2) {
      if (isNaN(arguments[j])) {return NaN;}        // should be skipped in calling environment
      if (isNaN(arguments[j+1])) {return NaN;}
      z = arguments[j] * arguments[j+1];
      result = result + z;                          // <<== Can not assign value ???
    }
    return result;
  }
  
  // this one works correctly
  function SumOf (values) {
    var nArguments = arguments.length;
    var j, result= 0;
    for (j = 0; j < nArguments; j++) {
      if (isNaN(arguments[j])) {return NaN;}        // should be skipped in calling environment
      result = result + arguments[j];
    }
    return result;
  }
  

  Any ideas what really does this error message mean?

  Hi Klaus,

  Just change your line 12 for

  for (j = 0; j< narguments;="" j="j+2)" {="">

  It should work.

• Cannot set the configured property "/ Initial.initialServices".

  Hi all

  I'm getting following error.

  05:21:52, 006 INFO [STDOUT] cannot set the configured property "/ Initial.initialServices" atg.nucleus.ConfigurationException: could not resolve the component/com/progiweb/fbconnect/pipeline/FacebookAuthStatusServlet

  05:21:52, 013 INFO [STDOUT] * error

  05:21:52, 064 INFO [STDOUT] cannot set the configured property "/ Initial.initialServices" atg.nucleus.ConfigurationException: could not resolve the component/com/progiweb/fbconnect/pipeline/FacebookProfileRequestServlet

  I checked the path of configuration of two components and the structure of the servlet is as below.

  src/com/progiweb/fbconnect/pipeline/FacebookAuthStatusServlet.java and src/com/progiweb/fbconnect/pipeline/FacebookProfileRequestServlet.java.java

  For properties files I created them under the path - config/atg/dynamo/servlet/dafpipeline / config/atg/dynamo/servlet/pipeline

  Inside of these I keep the files FacebookAuthStatusServlet.properties and FacebookProfileRequestServlet.properties
  

  The Initial.properties is as below - config/atg/dynamo/servlet/Initial.properties

  The content of Initial.properties is-

  & initialServices =.

  / ATG/Dynamo/servlet/dafpipeline/FacebookAuthStatusServlet,.

  / ATG/Dynamo/servlet/dafpipeline/FacebookProfileRequestServlet

  
  

  Should I have to keep the two pipelines-dafpipeline and pipeline or one of them?

  And my pipeline structure is correct or not?

  How to solve the error above?

  Please help on this!

  Kind regards

  Prateek

  You seem to be confusing core components and classes Java.  They are completely different.  The error message that you get "Unable to resolve component", says that the kernel is unable to find a file of specific properties anywhere in the directories named in your configpath trees.  To be precise, there is no file named /com/progiweb/fbconnect/pipeline/FacebookAuthStatusServlet.properties in your config directory.  If I read correctly this conversation, it is because the file with this name is a .java file, not a .properties file.  The two most likely causes of your problem are:

  1. you have a file of properties somewhere that mentions/com/progiweb/fbconnect/pipeline/FacebookAuthStatusServlet as the value of something else than $class.  $class is a special case whose value is sought by a Java ClassLoader in the classpath.  Values of the other properties are interpreted as references to the component, and looked up from core in the configpath.

  2. in the directory tree that contains the /com/progiweb/fbconnect/pipeline/FacebookAuthStatusServlet.properties isn't in the configpath.  ATG displays the complete configpath during startup.  If your directory is missing, you have may have specified correct information in the entrance of the ATG-Config-path in your module MANIFEST. MF file.

• Scene 1, Layer 'as', image1, 24 1050 line: cannot assign a value without reference.

  I'm doing a flash with the site automatically resizes to fit the users browser. the code I used is:

  function init()
  {

  internship. Align = StageAlign.TOP_LEFT;
  stage.scaleMode = StageScaleMode.NO_SCALE;

  stage.addEventListener (Event.RESIZE, updateSize);
  stage.dispatchEvent (new Event (Event.RESIZE));

  myBackground.x = 0;
  myBackground.y = 0;

  }

  init();

  function updateSize(e:Event)
  {

  myBackground.width = stage.stageWidth;
  myBackground.height = stage.stageHeight;

  myContent.x = stage.stageWidth/2 = myContent.width/2;
  myContent.y = stage.stageHeight/2 = myContent.height/2;
  }

  I get the error "cannot assign to a reference no valeur.*."

  Well, you need to determine what you want to be the basis for defining the sizes and assign each separately.

  You cannot: "something = an equation = an equation" that you have

  (curious - because your iPhone automatically tag on this introductory text "sent from"?)

• Cannot find HP slimline s5134sc drivers for WLAN

  Cannot find HP slimline s5134sc drivers for WLAN

  I belive I have install the chipset for the s5134sc driver, but can't find the drivers, Please HELP ;-)

  Hello

  You don't specify the operating system that you need to. This would help.

  Have you identified the WLAN device in the device of the alphanumeric string PCI\VEN Manager yet? Right-click on the WLAN device and select Properties, and then use the drop down menu under properties to select hardware ID information.

  

  If I were you, I would consider the upgrade of the mobile device to a half of the modern height with WPA2 security protocol and 802.11n broadband bandwidth. A 802.11b\g like the one your slimline network card has been delivered with doesn't have a lot of bandwidth. Consider Linksys and Netgear network cards. Remember that they must be halfheoght for a slimline PC like yours.

• Backup of property intellectual for iC-how long should it take?

  Hello

  Backup of property intellectual for iC-how long should it take?

  Was support for 12 hours and only at half way.

  The amount of data and what is your connection?

  There is no possible way to answer your question. How long is a piece of string?

• I installed iLivid and now FoxTab media but cannot listen to the live football for a reason any.

  Need help with streaming pls

  I installed iLivid and now FoxTab media but cannot listen to the live football for a reason, get really really bored, I wud appreciate all help pls, thanx

  I installed iLivid and now FoxTab media but cannot listen to the live football for a reason, get really really bored, I wud appreciate all help pls, thanx

  Hello

  You must contact that third party software developers and check for known issues or updates for compatibility to the version of Windows you are using.

  Concerning

• cannot copy pictures or my movie for flash player files more. Flash player is not filled to the top. Used last 3 weeks ago. You are using windows xp, media center edition 2005.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  cannot copy pictures or my movie for flash player files more. Flash drive
  is not filled to the top. Used last 3 weeks ago. Using windows xp, Media Center
  Edition 2005.

  ===================================
  Maybe there is a small slider that changes the drive to
  read-only?

  And... There may be a limit to the number of files that can
  Add in the root directory of the drive. This can be
  fixed by adding a few folders to sort the files.

  John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Cannot complete the update of security for Windows Vista (KB2961072)

  I have windows vista and cannot complete the update security update for Windows Vista (KB2961072) KB2961072.  I also ran system update readiness tool. No luck.   Anyone have any ideas on how to solve this problem?

  I had a very very long list of updates from several years ago, now I see only about 60.  OS says I have SP2 yet, but it does not look like it.  What happened to the hundreds of updates?  I have updates of the .net Framework and part of last week.

• Cannot update an update of security for Microsoft Works KB2754670. Error "646".

  Original title: I am unable to update an update of security for microsoft works KB2754670.  I get an error of 646 code can you help me.

  I'm unable to update an update of security for microsoft works KB2754670.  I get an error of 646 code can you help me

  Hi ValerieStansill,

  Thanks for posting your question in the Microsoft Community. We are happy to help you!

  From your problem description, I understand that you cannot install the update of security for Microsoft Works KB2754670 and the error 646.  Please correct me if I misunderstood the question.

  Question: This update problem occurs when Windows Setup encounters an error. Error code 0 x 80070646 and error code 646 are generated by Windows Installer. These generic errors indicate that Windows Installer has encountered a problem. The problem may be caused by an incorrect value in the registry.

  Before troubleshooting, I need to ask a few questions.

  1. Are you facing this problem with this update or with all the updates?
  2. Did you recent hardware or modifications to the software on the computer before this problem?

  To solve the problem, try the methods and check after each method:

  Method 1: run the Microsoft Fixit to solve the problem with Microsoft Windows Update is not working.

  http://support.Microsoft.com/mats/windows_update/en-us

  Method 2: Try to download the update and install it manually:

  Update of security for Microsoft Works 9 (KB2754670): http://www.Microsoft.com/en-US/Download/details.aspx?ID=34822

  Method 3: You receive the error code: 0 x 80070646, error code: 646 or error code: 1606 when using Windows Update or Microsoft Update: http://support.microsoft.com/kb/2258121

  Registry warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the in the Microsoft Knowledge Base. How to back up and restore the registry in Windows: http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry

  If the problem persists, post your reply with the results. We are happy to help you with the advanced troubleshooting steps.

  It will be useful.

• Cannot READ the CODE of REDEMPTION for Itunes gift card

  Cannot READ the CODE of REDEMPTION for Itunes gift card

  Take it back to the shop. It has nothing to do with MS

• cannot synchronize the canon elph 350hs for computer

  cannot synchronize the canon elph 350hs for computer - it keeps saying I need to download the software I did

  check and install the software in this link

  http://www.Canon.ca/inetCA/en/products/method/GP/PID/43924

  If it fails to request additional support from the same canon link

• Cannot reduce the size of photos for emailing - no email partner program

  I click on the photo folder, click send to, click on the message, reduce the size, fix and POP UP APPEARS says there is no e-mail program associate, if please install or go to the default program and create an association.  I can send an original email size 4 MB, but can not send too much of. I have Windows 7. What should I do. ?

  Moved from feedback

  Original title: cannot reduce the size of photos for emailing.

  Hello

  Windows 7 came with a pre-installed email program.

  If you have installed one?
  Windows Live Mail is popular
  http://explore.live.com/Windows-Live-Essentials?OS=other
  Is Thunderbird http://www.mozilla.org/en-US/thunderbird/

  After installing an e-mail program, make sure you have a default e-mail together program control panel > Default programs > set access and computer program defaults > Custom > click the caret down.

  The default e-mail program must be installed on the computer - e.g.Outlook Express, Windows Mail (Vista), Windows Live Mail, Thunderbird, etc.

  Web-based e-mail services cannot be made except by default e-mail program:
  * Yahoo, with the Yahoo tool bar
  http://help.Yahoo.com/l/us/Yahoo/mail/YAHOOMAIL/settings/settings-10.html
  * Gmail with gmail warning system installed
  http://mail.Google.com/support/bin/answer.py?answer=10966

  Hope this helps,
  Don