generating triggers composed on the basis of data Oracle 11 GR 2

Similar Questions

• can I create an EM 12 c database with the preconfigured repository database use, models on the basis of data Oracle 12 c

  The installation for EM 12 c document indicates "Install Oracle Database 11 g Release 2 (11.2.0.3) software on the host computer, where you want to create the database".  I want to use Oracle database 12 c.  Is there a template to preconfigure the repository on a database of 12 c?  Or is there a work around?

  For the version EM Cloud control 12.1.0.5, which is the most recent version of the MA, the models for the 12.1.0.2 of the database version is available here.

  Model of data base for the installation of Oracle Enterprise Manager Cloud control 12 c Release 5 (12.1.0.5)

  Note that, although a DB template helps you to simplify the installation process, you can always install EM12c without one. If necessary, look at the manual below:

  http://docs.Oracle.com/CD/E24628_01/install.121/e22624/install_em_exist_db.htm#EMBSC159

  Kind regards

  -Loc

• The source of data Oracle (ColdFusion application)

  I inherited a ColdFusion 10 app including the rear end of Oracle 11 g.  Recently, I started to receive java.sql.SQLSyntaxErrorException: [Macromedia] [Oracle JDBC Driver] [Oracle] ORA-00942: table or view does not exist error message when you try to access the application on my Test Server.  Since this is a request from the Government, I don't have a direct access to the CF Admin or the database.  The gov ' t SysAdmin has verified that the CF Admin connection is valid and connected.  The ADMINISTRATOR has verified the data source exists and the database is running.  Completely confused as to what is happening.   I posted on the Adobe ColdFusion support forum and they suggested that I post here to get the eyes of the database on the issue.   The thread is here: https://forums.adobe.com/message/6854985#6854985

  Thank you in advance.

  Always check and recheck the code before you say it's OK Thanx BKBK to find additional space in the data source.  I don't think that's the problem with the Test, but will check again.  Thank you.

• On the basis of data

  Hello

  I don't understand the need for database links,

  I think I can quote the remote database and the ip address of the remote server that has the database in the tnsnames.ora and I can connect.

  so, what is the need of the db link?

  I think I have a conflict, please clarify the question for me,

  Thank you

  > First point, I think I can do it with the tnsnames method, I've already mentioned?

  Yes.

  > 2nd point, which is the meanning to the DML distributed?

  Look at the fourth example (below).

  Definition:

  What are distributed Transactions?

  "A distributed transaction includes one or more instructions which, individually or in a group, update data on two or more separate nodes of a distributed data base."

  1. SELECT distance

  -Selects from a single database (remote)

  -It is a non-distributed transaction (of course, this operation does not alter because it does contain no DML commands)

  Select...

  of remote table1@db2--table

  where the...

  commit;

  2. remote DML, for example. Remote UPDATE

  -Updates as a single database (remote)

  -It is a non-distributed transaction

  Update remote table1@db2--table

  where the...

  commit;

  3. SELECT distribution

  -Selects in two or more databases

  -It is a non-distributed transaction (of course, this operation does not alter because it does contain no DML commands)

  -We cannot do this without database link

  Select...

  FROM table1,-local table

  Remote Table2@DB2--table

  where the...

  commit;

  4 distributed DML, for example. INSERTION distributed

  -Selection of two or more databases and inserts them into a single database (or selects a database and inserts into the second database)

  -It is a non-distributed transaction

  -We cannot do this without database link

  Insert into table1... - local table

  Select...

  from table2,-local table

  Remote table3@DB2--table

  where the...

  commit;

  5 distributed transaction

  -Once again: "a distributed transaction includes one or more instructions which, individually or in a group, update data on two or more nodes separate a database distributed."

  -We cannot do this without database link

  Insert into table1... - local table

  Update remote [email protected]

  commit;

  Kind regards

  Zlatko

• [ADF, JDev12.1.3] Session time-out: is it possible to perform a rederict to a URL to be composed on the basis of a model session ARVS?

  Hallo,

  using this tutorial Fortune Minds - Oracle ADF: how to redirect to a custom page each time the session of delay in the application of the ADF? I implemented a simple redirect when the session expires.

  The real URL 'redirect' should be composed according to the value stored in a var to a managed bean sessionScope, but the problem it is that... the afterPhase listener is run after the session has already expired.

  Could you kindly advice me a wokaround or a different approach to achieve this goal?

  Thank you

  Federico

  Cannot use a variable of bean in any scope as the info is gone. You can store the information in a cookie and read the form here.

  Or you use a different method like adventures of the man of Oracle ADF: heroic alternatives to avoid the annoying Popups SessionTimout ADF

  Timo

• Grant 'select only "on the basis of data

  Hello
  
  10.2.0.2 Dim.
  
  I want to give a user with "Select any object in the database"
  
  Thank you
  KSG

  >
  I am also finding an alternative path to the query below. (since there are more than 100 patterns and n number of objects) ("grant select on any table of " is not a best choic)
  >
  You are the only person who can assess your security needs.

  But if you want to exercise a positive security measures do not TAKE SHORTCUTS. This means put in place restrictions known on well-known objects and not grant on a table or an object and any grants a single user or super role.

  Aman and others have already said a good security refers to the compartmentalization and a rigid hierarchy. The objective of the implementation process and standards is not to make developers work more easier or faster. Yes - do the work correctly on 100 patterns and a large number of objects in each scheme will be tedious. You can automatically generate basic subsidies and coil them to scripts. But don't try to automate the entire process from beginning to end. That will leave large enough for a bus through security holes.

  Create a hierarchy in the sense of

  1. a schema at a time
  a. purpose of subsidies - for tables, views, procedures, etc. to a role. Best is to use a separate role for each type of object
  2 grant the role of schema for users who need

  Build small pieces manageable and controllable. Then combine these pieces into a top-level component. Not just make a huge mess of subsidies.

• SOA Suite, on the basis of data applications

  Hello
  
  SOA Suite (10.0.1.3.1 with 10.0.1.3.5 update) installed on the database with the Applications of the E-Business Suite does 11i both 12R?
  
  Or should she have separate database for himself?
  
  Thanks for your help
  Pawel

  Yes, SOA Suite (10.1.3.x) is using its own scheme to store its data. This does not disturb the EBS.

  Marc
  http://orasoa.blogspot.com

• Generator function defined by the user (normalize data points)

  Hi all

  You can use the function Scale1D to the Analisys Advanced library.

• How to load data from matrix report in the base using ODI table data

  Hello
  
  How to load matrix report data in the base table data using oracle Data Integrator?
  
  Description of the requirement:
  
  This is the data from matrix report:

  JOB                       DEPT10                DEPT20  
  ___________________________ _____________
  ANALYST                                           6000
  CLERK                   1300                     1900 

  Need to convert it to the format below:
  

  JOB                             Dept                        Salary
  _____________________________________________
  ANALYST                  DEPT10      
  ANALYST                  DEPT20                     6000
  CLERK                       DEPT10                    1300
  CLERK                       DEPT20                    1900
      

  Thank you for your help in advance. Let me know if any other explanation is needed.

  Your list seems to be a bit restrictive, you can do much more with the procedures of ODI.

  If you create the new procedure and add a step. In the 'source' tab command you define technology and pattern according to your source database. Use the unpivot operator as described in the link, please, instead of using "SELECT *' use the column names and aliases for example:"

  SELECT workstation,
  deptsal as deptsal,
  saldesc as saledesc
  OF pivoted_data
  UNPIVOT)
  deptsal-<-->
  FOR saldesc-<-->
  IN (d10_sal, d20_sal, d30_sal, d40_sal).<-->
  )

  Then in your tab 'command on target' defined technology and drawing on your target db, then put your INSERT statement for example:

  INSERT INTO job_sales
  (employment,
  deptsal,
  saledesc
  )
  VALUES
  (
  : job,.
  : deptsal,.
  : saledesc
  )

  That's why you use bind variables from source to load data into the target.

  Obviously if the source and target table is in the same database, you can have it all in a single statement to the "command on target' as

  INSERT INTO job_sales
  (employment,
  deptsal,
  saledesc
  )
  SELECT workstation,
  deptsal as deptsal,
  saldesc as saledesc
  OF pivoted_data
  UNPIVOT)
  deptsal-<-->
  FOR saldesc-<-->
  IN (d10_sal, d20_sal, d30_sal, d40_sal).<-->
  )

  also assign the log count "Insert" on the tab corresponding to your INSERT statement, so that you know how many rows you insert into the table.

  I hope this helps.

  BUT remember that this feature is out in Oracle 11 g.

• A full import by using datapump will overwrite the target database data dictionary?

  Hello

  I have a 11G with 127 GB database. I did a full export using expdp as a user of the system. I'll import the created dump file (which is 33 GB) on the basis of data from 12 c target.

  When I do the full import on the 12 c database data dictionary is updated with new data. But as is it already contained data dictionary? It will also change?

  Thanks in advance

  Hello

  In addition to the responses of the other comrades

  To start, you need to know some basic things:

  The dictionary database tables are owned by SYS and must of these tables is created when the database is created.

  Thus, in the different versions of database Oracle there could be less or more data dictionary tables of different structure database,.

  so if this SYSTEM base tables are exported and imported between different versions of oracle, could damage the features of database

  because the tables do not correspond with the version of database.

  See the Ref:

  SYS, owner of the data dictionary

  Database Oracle SYS user is owner of all the base tables and a view of the data available to the user dictionary. No Oracle database user should never change (UPDATE, DELETE, or INSERT) ranks or schema objects contained in the SYS schema, because this activity can compromise the integrity of the data. Security administrator must keep strict control of this central account.

  Source: http://docs.oracle.com/cd/B28359_01/server.111/b28318/datadict.htm

  Prosecutor, the utilities for export cannot export the dictionary SYS base tables and is marked

  as a note in the documentation:

  Data Pump export Modes

  Note:

  Several patterns of system cannot be exported because they are not user patterns; they contain metadata and data managed by Oracle. Examples of system schemas that are not exported MDSYS SYS and ORDSYS.

  Source: https://docs.oracle.com/cd/E11882_01/server.112/e22490/dp_export.htm#SUTIL826

  That's why import cannot modify/alter/drop/create dictionary database tables. If you can not export, so you can not import.

  Import just to add new Non - SYS objects/data in the database, therefore new data are added to the dictionary base tables (as new users, new tables, code pl/sql etc).

  I hope that this might answer your question.

  Kind regards

  Juan M

• Custody of the archivelogs pending data

  As a proof of concept, I've created a primary and standby a physical database. The archivelogs occur from the primary to the waiting and they are applied correctly. My question is how people manage remove the applied primary archive logs that are now on the standby server? I hesitate to simply run a script to delete them all from time to time because I don't want to delete a journal which has not been applied yet or is being implemented.
  
  What is the best way to remove the logs applied?
  
  Thank you!
  Sharon

  Adding Pavan...

  When backups of archived redo log files are taken on the basis of data pending:

  Issue the following command on the primary database:
  CONFIGURE ARCHIVELOG DELETION POLICY TO APPLIED ON STANDBY;

  Issue the following command on the database pending:
  CONFIGURE THE NONE ARCHIVELOG DELETION POLICY;

  When backups of archived redo log files are taken on the primary database:

  Issue the following command on the database pending:
  CONFIGURE ARCHIVELOG DELETION POLICY TO APPLIED ON STANDBY;

  Issue the following command on the primary database:
  CONFIGURE THE NONE ARCHIVELOG DELETION POLICY;

  Reference: http://www.acs.ilstu.edu/docs/Oracle/server.101/b10823/manage_ps.htm#1024046

  But I would like to write a script that will identify the applied (only) newspapers and remove... Based on the rate of newspapers, I will define the planning of this work...

• Creating auto-generated pages of the order of the day with dates

  Want an easy way to create pages of 12 months of a value with a provision of model grid generated in Illustrator at the end.  This development has seven different days (different available calendar highlight each day of the week amongs other things) can someone tell me how to generate these 365 pages without having to individually create all these pages and gather the?  I have no idea of software wich or function would be better to create this type of document.

  Thank you

  There are two ways to link your list that you make in Excel to the identity document. One is to export the text list and place (it's a bit complex when you have so many masters) and the other is to use the data merge.

  If you want to place the text, starting with a master page that has a frame on each side of the spread (for pages face to face) to contain the dates and add any other information that will appear on all pages in the order of the day. Make sure that the images for the dates are threaded from left to right, and then click inside the image on the left with the text tool. Apply a paragraph style that includes 'Start in the next section' in the framework Options keep in the style definition. Master pages of basis for seven days on this master. Befor put you the date implementation of 365 pages list to apply the correct masters, then place the date list by holding the SHIFT key and clicking inside the frame of date on page 1.

  To use the data merge you need to add a line to the top of the list and put a name in what will become the label of the field, then export the tab delimited text (because I assume you have commas, but without tab in your arrival dates).  I make a master with only the date box and nothing else included (or start with no master) and do a one record per page, then AFTER the merger merger, apply the will find it with the other information on the correct pages. The framework of date box should not appear on other masters. Help on the fusion of data files are very good, but do not hesitate to come after read you them if you have any other questions.

• The amount of data is generated in continuous mode?

  I'm trying to implement a measure of voltage using a card PCI-6071E. I looked at some of the samples (ContAcqVoltageSamples_IntClk_ToFile) that uses the AnalogMultiChannelReader to collect the data asynchronously and write to a file. My question is, if I do 2000 samples per second with 200 samples per channel, the amount of data will be generated? By using compression really will make a big difference in how much data I have to deal with that? I want to graph data 'real time' in certain circumstances, but usually save the file for post processing by another application. My tests can be run for several minutes. I looked at the things given compressed, and I didn't understand how I could read the data back and understand what data are intended to what channels and the amount of data belongs to each channel and each time slice. Thank you

  How many channels are you reading from?  Samples per second, is what will tell you the amount of data that you produce.  Multiply this number by the number of channels and you will get the total number of samples per second of the generated data.  (The samples per channel determines just the size of buffer in continuous acquisition, so it is not used to determine the total amount of data being generated.)  Each sample will be 2 bytes, so the total amount of data will be 2 * 2000 * number of channels * number of seconds during which your test runs for. From your description, it sounds not compression is really necessary; just save your files regardless the other format your program can read (text delimited by tabs, or any other common format files) and do not worry about compression, unless the size of your files become prohibitive.

  -Christina

• How to compare the length of the data to a staging table with the definition of the base table

  Hello
  I have two tables: staging of the table and the base table.
  I get flatfiles data in the staging of the table, depending on the structure of the requirement of staging of the table and the base table (length of each column in the staging table is 25% more data dump without errors) are different for ex: If we have the city long varchar 40 column in table staging there 25 in the base table. Once data are discharged into the intermediate table that I want to compare the actual length of the data for each column in the staging table with the database table definition (data_length for each column of all_tab_columns) and if no column is different length that I need to update the corresponding line in the intermediate table which also has an indicator called err_length.
  
  so for that I use the cursor c1 is select length (a.id), length (b.SID) of staging_table;
  c2 (name varchar2) cursor is select data_length all_tab_columns where table_name = 'BASE_TABLE' and column_name = name;
  But we get atonce data in the first query while the second slider, I need to get for each column and then compare with the first?
  Can someone tell me how to get the desired results?
  
  Thank you
  Manoi.

  Hey, Marco.

  Of course, you can set src.err_length in the USING clause (where you can reference all_tab_columns) and use this value in the SET clause.
  It is:

  MERGE INTO  staging_table   dst
  USING  (
         WITH     got_lengths     AS
                   (
            SELECT  MAX (CASE WHEN column_name = 'ENAME' THEN data_length END)     AS ename_len
            ,     MAX (CASE WHEN column_name = 'JOB'   THEN data_length END)     AS job_len
            FROM     all_tab_columns
            WHERE     owner          = 'SCOTT'
            AND     table_name     = 'EMP'
            )
       SELECT     s.ename
       ,     s.job
       ,     CASE WHEN LENGTH (s.ename) > l.ename_len THEN 'ENAME ' END     ||
            CASE WHEN LENGTH (s.job)   > l.job_len   THEN 'JOB '   END     AS err_length
       FROM     staging_table     s
       JOIN     got_lengths     l     ON     LENGTH (s.ename)     > l.ename_len
                           OR     LENGTH (s.job)          > l.job_len
       )     src
  ON     (src.ename     = dst.ename)
  WHEN MATCHED THEN UPDATE
       SET     dst.err_length     = src.err_length
  ;
  

  As you can see, you have to hardcode the names of the columns common to several places. I swam () to simplify that, but I found an interesting (at least for me) alternative grouping function involving the STRAGG user_defined.
  As you can see, only the subquery USING is changed.

  MERGE INTO  staging_table   dst
  USING  (
         SELECT       s.ename
         ,       s.job
         ,       STRAGG (l.column_name)     AS err_length
         FROM       staging_table          s
         JOIN       all_tab_columns     l
        ON       l.data_length  < LENGTH ( CASE  l.column_name
                                            WHEN  'ENAME'
                                  THEN      ename
                                  WHEN  'JOB'
                                  THEN      job
                                     END
                             )
         WHERE     l.owner      = 'SCOTT'
         AND      l.table_name     = 'EMP'
         AND      l.data_type     = 'VARCHAR2'
         GROUP BY      s.ename
         ,           s.job
         )     src
  ON     (src.ename     = dst.ename)
  WHEN MATCHED THEN UPDATE
       SET     dst.err_length     = src.err_length
  ;
  

  Instead of the user-defined STRAGG (that you can copy from AskTom), you can also use the undocumented, or from Oracle 11.2, WM_CONCAT LISTAGG built-in function.

• Data block in the procedure and the Base Table

  Hello
  
  I hava a form with a block of master and detail. The fields in the Master block are
  
  Emp_name, DateOfJoin, salary... I created this block with the procedure with a Ref Cursor, becaue the user
  want to load the data based on the conditions it enter for example: DateOfJoin < = Sysdate and DateOfJoinn July 1, 2008 "."
  SO I created a block of control with the fields name, MiddleName, LastName, of DateOfJoin, in DateOfJoin, the salary, and when the user clicks on the data loading
  button, I load the data to block under these conditions using the procedure.
  Note that in the Emp_Name table if a field, but contain first name, middle name, and last name with a separate space.
  
  My needs is, is there any method to develop this master block with a database table, so that if the user want to select it
  data based on other conditions, it can enter directly into the block of data using Qry enter and run Qry, also if he wants to
  Select data based on the top-level asked the search criteria, it will click Load Data.
  I hope that in this case, when the user selected the Load data button, I need to change the data source to the Type of procedure and set the source of data on behalf of the procedure name.
  
  Is there any other easy solution flor this
  
  Thanks in advance

  not sure if I get your needs. I understand the following:
  You have a block based on table emp, containing a DateOfJoin column and the user should be able to enter into a 'complex' where denomination.

  To do this, you do not have to base block one a procedure or ref_cursor. Two possibilities:

  Add two fields more directly in the block that are non-base of data-objects of type date fixed query on yes and let the user to enter a date range in these columns. In the accumulation of PRE-QUERY-trigger a WHERE condition by using the value in this field:

  something like:

  DECLARE
    vcMin VARCHAR2(10):='01.01.1700';
    vcMax VARCHAR2(10):='01.01.2999';
  BEGIN
    IF :BLOCK.DATE_FROM_JOIN IS NOT NULL THEN
      vcMin:=TO_CHAR(:BLOCK.DATE_FROM_JOIN, 'DD.MM.YYYY');
    END IF;
    IF :BLOCK.DATE_TO_JOIN IS NOT NULL THEN
      vcMax:=TO_CHAR(:BLOCK.DATE_TO_JOIN, 'DD.MM.YYYY');
    END IF;
    SET_BLOCK_PROPERTY('BLOCK', ONETIME_WHERE, 'DATEOFJOIN BETWEEN TO_DATE(''' || vcMin || ''', ''DD.MM.YYYY'') AND TO_DATE(''' || vcMax || ''', ''DD.MM.YYYY'')');
  END;
  

  Another option:
  together, the length of the request of the DATEOFJOIN field to say 255, then the user can directly enter #BETWEEN fromdate AND fodate in the field.