[ADF, JDev12.1.3] Session time-out: is it possible to perform a rederict to a URL to be composed on the basis of a model session ARVS?

Similar Questions

• [ADF, JDev12.1.3] 'BTF as train': is it possible to use routers and operations between views/stops?

  Hallo,

  I need to create a working group while the train with 4 stops.

  The page showed in the 2nd stop should be based on a choiche which makes the user in step 1:

  Option_1 involves using trainStop_1.jspx as point of view for the 2nd stage

  Option_2 implies to use trainStop_2.jspx.

  Option_3 means to use trainStop_3.jspx "" "" "

  
  

  I thought to create 3 times (one for each page jspx) and to use a router to display the correct view, but it seems that the router does not allow a created task force so that the train.

  
  

  In addition, between the 1st and the 2nd stop, I need to call the createWithParams operation that has 1 parameter whose value are known only after the user makes the choice of the 1st stage.

  
  

  If you kindly could help solve this issue?

  
  

  Thank you

  Federico
  

  Yes, you can:

  http://www.techartifact.com/blogs/2012/11/method-call-between-train-flow-in-ADF-techartifact.html#sthash.FMOsLwb4.DPBS

• I use CC as a teacher. Installed on 2 computers and use only 1 time. Is it possible to install CC and a third machine and disable one of the other? Mario Dirkx

  So, I would like to install CC on a third machine and disable one of the other! Is this possible?

  Mario Dirkx

  Yes.  You can install it on as many machines as you want and then control which two are active by signing in/out according to the needs.

• Time-out in the structure of the event

  Hello

  I try to configure the time-out period in the structure of the 5s event using the loop, as shown in the picture as an attachment. The problem is that this time-out event occurred only when I code debugging and does not happen when I run the same without debugging. Any suggestions on this?

  Thank you!

  OK, just use VISA Read to read the first three octets.  Then do another set VISA Read the number of bytes defined in dlen.  If the data does not, then you will get a VISA expiration time.

  

• How to get what the current backlight time-out is set?

  Hi all

  Work in 4.2.1. I would like to be able to arbitrarily increase the backlight time-out and restore it to what the user he had initially set when I'm done. Looking at the API of backlighting (i.e. backlighting. getTimeoutDefault()), apparently I'm only able to recover the default delay, which - as I understand - would be different from the time delay set by the user.

  So my question: How can I get the _current_ time-out setting? Otherwise, looks like that I would not be able to always set the time-out period back to what the user had selected through their setting of BB menu.

  Thanks for your comments!

  There is no BlackBerry API that provides the setting specified by the user backlight time-out.

• Time-out settings

  Is it possible to dynamically access time out (eg. Web object functional timeout)? If so, how can I change?
  
  The reason why I want to do it is because now, if a script is running on multiple computers, the timeout parameter must be changed for each machine in Openscript preferences.
  I prefer my script to change the timeout value according to the task at hand.
  
  
  Thank you
  Narayan

  To print all the settings in the tab console during execution:
  System.out.Print (getSettings ())

  To set a particular parameter:
  getSettings () .set (setting_name, setting_value);

  The one that you probably want to define:
  Web.event_time_out = 60

  So it should be:
  System.out.Print (getSettings ());
  getSettings (.set("web.event_time_out",19));
  System.out.Print (getSettings ());

  JB

• How to change the behavior of time-out by default session ADF backwards

  a message is displayed to the ADF default session expire before some time defined in the web.xml file, after that this alert of anthers of time will show the message expiration time.
  But our recruitment that uses a message dialogue first show the session will be interrupted and then counts down the time finally show session timeout message.
  Dose ADF provide interface to change this?

  As far as I know,
  There is no such feature out of the box... you do have to use JS like http://www.codeproject.com/Articles/24669/JavaScript-to-Show-Session-Timeout-Counter.
  Take suggestions on how to connect since the last post in this thread -ADF Faces: best practices session timeout

• ICX session sharing between EBS and ADF. Navigate from EBS page by page of ADF custom application. but every time I get the session as a GUEST, even if I give valid credentils to enter into EBS.

  Hello

  I am integrating EBS and ADF through sharing of session ICX. Navigate from EBS page by page of ADF custom application. but whenever I get session as GUEST (VALID_GUEST), even if I give credentials valid at the EBS system. I should get a valid session that I have connected with a valid user. As it it a VALID_GUEST that the status of cookie icx, back (he got newspapers/debug) and I am.  Comparing with status cookie VALID icx, so every time system opens the Apps login page.  I used fndext.jar to do this. Please help me on this. I'm not sure it's a problem with DB/EBS EBS system, or the code of the adf. My code spruce is given below.

  import java.io.IOException;

  import java.sql.Connection;

  import java.sql.SQLException;

  Import javax.faces.application.FacesMessage;

  Import javax.faces.context.FacesContext;

  to import javax.servlet.http.HttpServletRequest;

  to import javax.servlet.http.HttpServletResponse;

  Import oracle.adf.controller.v2.lifecycle.Lifecycle;

  Import oracle.adf.controller.v2.lifecycle.PagePhaseEvent;

  Import oracle.adf.controller.v2.lifecycle.PagePhaseListener;

  Import oracle.apps.fnd.ext.common.AppsRequestWrapper;

  Import oracle.apps.fnd.ext.common.CookieStatus;

  Import oracle.apps.fnd.ext.common.EBiz;

  Import oracle.apps.fnd.ext.common.Session;

  / public class MyCustomPhaseListner implements PagePhaseListener {}

  public MyCustomPhaseListner() {}

  Super();

  }

  AppsRequestWrapper wrappedRequest = null;

  HttpServletRequest request = null;

  HttpServletResponse response = null;

  String currentUser store = null;

  String currentUserId = null;

  {} public void afterPhase (PagePhaseEvent pagePhaseEvent)

  If (pagePhaseEvent.getPhaseId () == Lifecycle.PREPARE_RENDER_ID) {}

  System.out.println ("in phase");

  If (wrappedRequest! = null & &)

  wrappedRequest.getConnection ()! = null) {}

  try {}

  If (! wrappedRequest.getConnection () .isClosed ())

  wrappedRequest.getConnection (m:System.NET.Sockets.Socket.close ());

  } catch (SQLException e) {}

  }

  }

  }

  }

  {} public void beforePhase (PagePhaseEvent pagePhaseEvent)

  If (pagePhaseEvent.getPhaseId () == Lifecycle.INIT_CONTEXT_ID) {}

  Channel agent = null;

  System.out.println ("forward Phase");

  FacesContext fctx = FacesContext.getCurrentInstance ();

  request =

  (HttpServletRequest) fctx.getExternalContext () .getRequest ();

  answer =

  (HttpServletResponse) fctx.getExternalContext () m:System.NET.FtpWebRequest.GetResponse ();

  CookieStatus icxCookieStatus = null;

  try {}

  Connection EBSconn = ConnectionProvider.getConnection ();

  EBiz instance = EBizUtil.getEBizInstance ();

  wrappedRequest =

  new AppsRequestWrapper (request, response, EBSconn,

  (instance);

  A session = wrappedRequest.getAppsSession (true);

  tried with "a session = wrappedRequest.getAppsSession ();" / / do not return not of any session

  icxCookieStatus =

  session.getCurrentState () .getIcxCookieStatus ();

  Agent = wrappedRequest.getEbizInstance () .getAppsServletAgent ();

  If (! icxCookieStatus.equals (CookieStatus.VALID)) {}

  response.sendRedirect (agent + "AppsLocalLogin.jsp");

  return;

  }

  currentUser = session.getUserName ();

  currentUserId = session.getUserId ();

  } catch (Exception ob) {}

  ob.printStackTrace ();

  }

  FacesMessage message =

  new FacesMessage ("Session is:" + icxCookieStatus + "" +)

  currentUser + "" + currentUserId);

  fctx.addMessage (null, message);

  }

  }

  }

  Have you checked

  https://blogs.Oracle.com/jruiz/entry/adf_and_oracle_e_business

  https://blogs.Oracle.com/jruiz/entry/adf_and_oracle_e_business2

  http://www.Oracle.com/technetwork/tutorials/EBS-SDK-ADF-1887167.PDF

  https://www.YouTube.com/watch?v=9wGv7yxRgVU

  Timo

• [ADF, JDev12.1.3] How/where to set the session timeout

  Hallo,

  After a few minutes of inactivity, the browser displays a message to inform that the session is not more active and only OK been must be clicked to refresh the page.

  If a dialog box "btf" has been opened on the left, it becomes...

  

  I would like to know what is the right place/method to set a deadline.

  If possible I would like that when the timeout checks, the application performs a redirect to a page I like (for example the login page).

  The application of ADF Essentials and is deployed to the GlassFish application server.

  My concern is... what should happen to the open operation / pending when the time-out occurs?

  For example, the user is modifying an af:table but it has not clicked validate or cancel...

  Thank you

  Federico

  I would like to know what is the right place/method to set a deadline.

  For java web applications, you can set the session timeout in the web.xml file. (this is the global settings associated with all sessions)

  If you wish, you can set the timeout of session by program (and this is related only to the current http session).

  If possible I would like that when the timeout checks, the application performs a redirect to a page I like (for example the login page).

  http://fortunefusionminds.blogspot.com/2014/04/how-to-redirect-to-custom-page-whenever.html

  ADF: Session expires management redirect to login page | Bungbutan

  ADF developers World: Detection and handling of user session expiry

  My concern is... what should happen to the open operation / pending when the time-out occurs?

  Well, session is destroyed, it will destroy all instances of AM and do rollback.

  See also: Andrejus Baranovskis Blog: ADF BC Application Module Instance Timeout and reliance Timeout of Session Web

  Dario

• unlimited time-out, but the idle time-out is 30 minutes per session

  Hi all

  I connect with client Anyconnect for an ASA5510 (8.2.1 (11))

  In group policy, I idle timeout = unlimited, but if I control the session in asdm and the command line

  I find idle timeout = 30 minutes.

  If I insert idle timeout = 60 in politics, in the session I see Idle timeout = 60 min.

  Is only a problem in the visualization of the session?

  Defining the 'vpn-idle-timeout none' group strategy is a misunderstood command. When it is set in group policy, it does not neutralize the idle-timeout. In the past, I filed a bug in order to clarify what this setting (see CSCsm15079) to clarify the misunderstanding. In more recent versions of the code with bug fix, context-sensitive help for command now correctly explained:

  ASA(config-Group-Policy) # vpn - idle - timeout?

  orders/options mode group policy:

  <1-35791394>Number of minutes

  No IPsec VPN: disable the time-out and allow indefinite idling;

  VPN SSL: Use the value by defect-idle-timeout

  When set to none, and you are using SSL VPN, this means that he will inherit the default-timeout defined under the Webvpn config. The default value for this command is 30 minutes, so that's probably why ASDM displays 30 minutes. If you want to adjust this value, it can be changed with:

  conf t

  WebVPN

  by default-idle-timeout

  If you want an 'unlimited' idle time, must be defined the vpn-idle-timeout in group policy for a specific number instead of "none" - the maximum that you can set to the vpn-idle-timeout command is 35791394 minutes (something like ~ 24000 days or essentially unlimited).

  Please note this post and mark it as resolved if he addressed the issue.

• session time-out

  This is the situation:

  -chanel AMFChannel

  -session expired web.xml = 1 minute

  1. from the connection of client app client and on the server in run mode I create destination for the logged-on user, and then the customer I agree a consumer for this destination. Everything is OK has send messages from the server and the client receive them, but the problem is here:

  When a minute past without any intervention from the client the session on the server is never closed, even if I wait an hour. So I rebiuld project just to try what happens if I do not agree with the destination of the customer, so now I don't use blazeds in this case the session is closed at the time. So where is the problem. BlazeDS is the open session? And how to overcome this problem, I have want to have job destination and http session that close at the time?

  Hello. With most channels, when the client is connected to the server, we keep alive HTTP session. With polling stations, your client may not be sending messages to or receiving messages from the server, but the client is actively poll the server for new messages. In general, as long as the client is connected to the server prevent us the HTTP session to time out.

  Is this a concern of security for you? The time-out should occur on the server, or is it on the client?

  If you are uncomfortable with having the timeout of the written customer a customer code to disconnect the consumer if no messages have been sent or received in a given period of time should not be too hard. You can also use the invalidate session on logout channel setting to disable the HTTP session as soon as the client sends the disconnect message to the server.

  If this solution is still a security issue, you may be able to get the HTTP session to time out using a long channel of the poll (with Mark activated and waiting-time-millis defined AMFChannel). If you set the interval-waiting-millis-1, the client will send a request to poll on the server and then demand survey will get parked on the server so that a new message arrives for the client. With the request to the server, it should not be any new request coming in it would be alive to keep the session HTTP and the HTTP session should timeout.

  I don't really like this solution because it relies on the client using a single channel to connect to the server and BlazeDS has been designed as much as possible to be independent. The behavior should be the same regardless of the channel is used.

  If you can describe in more detail a little bit what kind of behavior you want to see and why, can I apply for improvement on your behalf.

  I can see why for reasons of security we would like to be able to exhale the customer if she remained inactive for a given period of time. And by inactive I mean the customer only has not sent or received messages, not currently meant by inactive (the client is not connected to the server). Good to have feedback on how you want to see this implementation where you think this code should live (client or server) would be helpful.

  -Alex

• Help: How do reset you default values for the session and the time-out at the admin level

  Hello
  
  The DBA was trying to save the settings of time-out value by following the instructions and it kept him setting a default off 28800 timeout of Session Timeout and Idle of 3600.
  
  He saved the value 1, and now we cannot get to change.
  
  How do reset you the default preferences?

  Bill,

  Sorry, I missed your point. To undo this damage, try this:

  Connect as SYS

  ALTER session set current_schema = apex_030200
  /
  wwv_flow_platform.set_preference (p_preference_name-online 'MAX_SESSION_IDLE_SEC', p_preference_value-online 3600)
  /
  wwv_flow_platform.set_preference (p_preference_name-online 'MAX_SESSION_LENGTH_SEC', p_preference_value-online 28800)
  /
  Commit
  /

  Adjust 3600 and 28800 as you like.

  Scott

• Using the MS ODBC driver to connect to Oracle and MS SQL DB - get a time-out error

  I have the driver installed and configured on the Linux host where sits the Oracle DB.  I worked through the configuration and tested along the way.

  If I execute the following SQL statement I get a timeout error after only 15 minutes:

  SQL > select * from host_table@UCMDB806;

  Select * from host_table@UCMDB806

  *

  ERROR on line 1:

  ORA-28511: interruption of the RPC connection to heterogeneous remote agent to help

  SID = ORA-28511: lost RPC connection to heterogeneous remote agent to help

  SID = (Description = (Address = (Protocol = TCP)(Host=localhost) (port = 1521)) (CONNECT_DAT

  A = (SID = UCMDB806)))

  ORA-02063: preceding the line of UCMDB9

  Process ID: 4070

  Session ID: 392 serial number: 40935

  If I limit the SQL to give hosting me only that start with 'a', I get this:

  SQL > select * from host_table@UCMDB806 where (name) lower like 'a % ';

  ID

  ------------------------------------------------------------

  NAME

  --------------------------------------------------------------------------------

  TenantID

  ------------------------------------------------------------

  name of the vendor

  --------------------------------------------------------------------------------

  softwarename

  --------------------------------------------------------------------------------

  4616

  AHOST-B

  76436

  ID

  ------------------------------------------------------------

  NAME

  --------------------------------------------------------------------------------

  TenantID

  ------------------------------------------------------------

  name of the vendor

  --------------------------------------------------------------------------------

  softwarename

  --------------------------------------------------------------------------------

  SYMANTEC

  .

  .

  .

  It seems to be a time-out on this query.  My software is located 20 minutes for a query.  MS SQL server is set to unlimited for remote queries (we did it to help isolate the timeout).  So, I guess the wait time that is happening at the level of ODBC driver.  Someone has all understand how to solve this problem?

  Hello

  Your question is beyond the scope of this community.

  Please repost your question in the SQL Server TechNet Forums.

  https://social.technet.Microsoft.com/forums/SQLServer/en-us/home?category=SQLServer

  See you soon.

• ACE time-out settings

  Hey people,

  I'm delving into administrator's guide and I can't seem to find anything on wait times, other than sticky expirations.

  Basically, what I'm looking for something that will tell me what is the setting of time-out 'session' is... It is a global setting, it is configured per farm, etc...?

  any help would be appreciated...

  Thank you.

  Bruce

  Bruce,

  Most of the ACE timers is located at the following link:

  Standardization and reassembling IP settings TCP/IP configuration

  http://www.Cisco.com/en/us/docs/interfaces_modules/services_modules/ACE/vA2_3_0/configuration/Security/Guide/tcpipnrm.html

  Without seeing a real failure in a network capture, it is difficult to speculate on the cause.  The ACE doesn't care about the size of a file through it.  If your VIP is only Layer 4 (VIP and port), and then the ACE sees as nothing more than a TCP session and look higher up in the stack.  If the class is Layer 7 (parsing HTTP header), then it only looks like the header.

  The best place to get a capture is the port of tengig ACE, especially if the client computers are locked.  The capture of tengig will give on both sides of the connection.  Forward and after you will showtechs / TAC to see if the error counters are incrementing during a failure.

  You can also use the capture utility of integrated package of the ACE if all else fails.  First, I use a SPAN.  After all, the ACE could be the culprit here, and using the built-in utility is a bit like asking a suspect of a crime for the facts of the case.  ;- )

  Another tool to use is the 'see the conn?' and 'display the details of the conn' orders immediately after launching a test connection.  This will give you an idea about the State of the connection, and to what extent this time he got.

  Sean

• [ADF, JDev12.1.3] Which is the best way to define the properties of CIU/fragments of pages. Is the approach that I have used a good choice (for a beginner)?

  Hallo,

  in my app, that I have a lot of pages and fragments in which properties (for example rendered text, disabled, Selected,...), lots of user interface components must be set, before/when the page is displayed, depending on the session and pageFlow scope attributes.

  So far I have created for each page/one backingBean brought bean fragment in which I defined an attribute for each property defined (e.g. 2 properties for each UIC: UIC is 10...) "I have 20 attributes to manage in the bean).

  Then, I linked each attribute of the bean to the respective UIC property. You can see in this my thread (unfortunately without answers ) [ADF, JDev12.1.3] backingBean bean: a lot of properties to set for lots of CIU... is better by using the properties of the binding or access code (created by ID) UIC? a small example. I put the attributes the bean Builder (or in a function of 'action' if the APP properties must be set based on the interaction of the user).

  I would like to know:

  • If it is a good approach / recommended / safe or if there is a better way;
  • If the scope backingBean is OK, or if a larger scope would be better.

  As I asked in the thread in the link above, the situation can become difficult to manage if the PPP for which setting, properties are very different.

  So I'd like if there is no alternative that I can use to get the same result with less effort.

  For example, using the class ComponentReference or invokeOnComponentAPI could simplify my life? And their use could I always use backingBean brought beans?

  Thank you

  Federico

  Federico, please understand that this forum has no sla. I have other work to do, who pays my bills. I will do my best to help, but you can not expect the instant replay.

  (1) you must not use the bean to init your beans. You can delay load or init your beans instead.

  (2) as Frank and says you can use a bean to view range and use it to make your calculations as long as you know how their parameters go to the btf

  (3) you should always use the reference of the component if you bind a component to a bean. Make a habit of all scopes.

  As we do not know how you calculate the State and how often it changes while the Working Group is on the page, it is difficult to give further advice.

  Timo