generic device driver mount is missing... I need a load down to windows vista 32 bit... Help, please

Similar Questions

• Problems in porting windows vista 32 bit on a 64-bit Windows 7 machine device driver

  Hello

  I'm porting windows vista 32-bit on windows 7 64 bit machine printer driver. I have compiled DLLs. When I add printer and load INF file, I get the message that this driver is not compatible x 64 driver. Please tell me what adjustments should I do in the INF file.

  Thank you.

  Go to the printer manufacturer's website and download the right driver (free) for your operating system. You should also disable automatic windows update - Start, made driver installation computer right click go to the settings/settings/device installation properties / Advanced - value - not let me choose/never install updated win - save changes, remove previous attempts also to devices and printers, have the printer on but do not connect the usb cable until you are prompted - install driver downloaded.

  If there is no 64-bit Windows 7 drivers don't try the 64 bit Vista driver, if it does not work then you will need a new printer.

• I lost the disc to my windows Vista 64 bit OEM System Builder, but; I have the audit validation info he writes down. I need a new drive.

  I lost the disc to my windows Vista 64 bit OEM System Builder, but; I have the audit validation info he writes down.  I need a new drive.

  I lost the disc to my windows Vista 64 bit OEM System Builder, but; I have the audit validation info he writes down.  I need a new drive.

  EU the link below to download the ISO of Windows Vista. It's totally free.
  The site is Digital River. It is 100% legitimate. It is recognized and supported by Microsoft.

  The link also teach you how to burn the iso file on a bootable install DVD.

  http://en.community.Dell.com/support-forums/software-OS/w/microsoft_os/3317.2-3-Microsoft-Windows-Vista-official-ISO-download-links-Digital-River.aspx

  Although it says Dell at the top of the page, it applies to both Dell or other than Dell.

  Make sure that you select the correct version of bit.

  x 86 32-bit version =

  x 64 = 64-bit version.

• System Recovery Options - no operating system listed, need to load the drivers, but don't know where to find this (Windows Vista 64-bit)

  It is a gateway M6866 laptop running Windows Vista 64-bit.

  The computer does not start up--gives "BOOTMRG is missing" error at startup.  I'm trying to boot from the 64-bit of Windows Vista recovery disc.  I clicked on the "repair your computer" option, and it shows the computer loading files.  Then the "System Recovery Options" box appears and asks me to select the operating system to fix it.  The problem is that nothing has listed.  It is said that if your OS is not listed click Load Drivers.  I did, but it is said to insert the device installation media, and then click OK to select the driver.  I clicked on OK and then opens a browser window to select the file.

  I don't know which file I'm supposed to select here.  I searched online for an answer, and someone told him to go to the computer manufacturer's website and download the driver for RAID controller.  I tried to go to the site of the bridge to find it, but it doesn't seem to be one for Vista 64-bit.

  Please please help!  I have to at least be able to extract the files to the hard drive before reinstalling windows.

  Hello

  ·        Have you Configure RAID on the system?

  If you have not configured then RAID on the system, I suggest you to disable the RAID/eSATA (SATA improved) in the BIOS. Once you turn off the RAID/eSATA on the system that your basic hard disk should be recognized by the system because it doesn't require any drivers, it will act as an IDE. Once you have disabled the RAID/eSATA then booting into the recovery environment and build the Bootrec and check if the problem is resolved. I suggest you follow the steps mentioned below to rebuild the bootrec.

  Rebuild the BCD store by using the Bootrec.exe tool in the Windows recovery environment. To do this, follow these steps:

  a. get the Vista installation DVD and pop in your drive.

  b. then restart your computer.

  c. press a key when you are prompted.

  d. Select a language, a time, a currency, and a keyboard or another input method, and then hitNext

  e. click on repair your computer

  f. click the operating system you want to repair, and then click Next

  g. in the System Recovery Options dialog box, click command prompt

  h. type bootrec /rebuildbcd and then press the Enter"" key.

  ·        If Bootrec runs successfully, it will present you with the installation of a Windows directory path. To add the entry in the BCD store, type Yes. A confirmation message appears that indicates the entry has been added successfully.

  ·        If Bootrec cannot findany lack of facilities of Windows, you must remove the BCD store, and then you must re-create it. To do this, type the following commands in the order shown below: (remember to press ENTER after each command)
  bcdedit/export C:\BCD_Backup
  Ren c:\boot\bcd BCD.old
  Bootrec /rebuildbcd

  i. restart the computer.

  For more information, see the article mentioned below.

  How to use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and repair startup issues in Windows

  http://support.Microsoft.com/kb/927392

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Optiarc bd rom bc - 5500 s work stopped during the upgrade to Windows 7, Windows Vista 64-bit impossible to load the driver.

  Hello

  I use sony vaio VGN-FW290 JTH. I tried to upgrade to Windows 7 and has been invited to uninstall iTunes, Vaio Care, ATI Catalyst Install Manager, ATI Catalyst Control Center, Google Toolbar. I uninstalled it, rebooted the PC and then tried to run Windows 7 installation DVD. Then, I realized that my CD/DVD/BD does not, marked with! in the Device Manager. I tried the procedure in this forum to the http://social.answers.microsoft.com/Forums/en-US/vistahardware/thread/957a26d4-4219-4b76-8e89-2e74e6ee2a0e/. I ran SFC tool - it pointed out some problems he couldn't fix it. I tried to update to the latest drivers for the drive, but Windows says that the latest drivers are installed. The properties for the device say: Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39):

  I hope someone from Microsoft or Sony can help - I think that it is catch 22 during the upgrade to Windows 7.
  Concerning
  Tomgold

  Hi tomgold,

   

  Welcome to Microsoft Answers Forums.

  This can also occur if an incorrect device driver has been installed for the DVD-ROM device.

  I suggest that you visit the DVD drive manufacturer site download the latest drivers for the drive and install on the computer and if it works. Make sure you download the Windows vista 64-bit driver.

  Device Manager error codes

  http://support.Microsoft.com/servicedesks/webcasts/wc091802/devicemgrerrcodes.htm?gssnb=1

  If the above, step fails I would suggest that you run the patch available in the link below and check if it works.

  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• New Driver for MFC-4800 for Window Vista 64-bit?

  Hello
  How can I get my printer Brother mfc 4800 to print using Windows Vista 64-bit.  The printer is connected by usb cable and the machine is recognized by the computer.  It appears in Control Panel > printer folder.  When I choose printer and each attempt a test page or print a document the printer "ramps" upward as it wants to print but nothing prints ever.  This printer is connected to a computer, that I just replaced that had XP as an operating system.   Printer drivers claim to be "integrated" in Vista. I call brother and they say he works at their end, there is something missing on the microsoft side.  If you the new driver or support can you pls send.

  I hope someone can help. Thank you.

  Got

  http://welcome.solutions.brother.com/BSC/Public/Templates/DownloadTop.aspx?NRMODE=Published&NRNODEGUID=%7b44CBEF26-F458-4FEF-B683-5F7B6D26AF08%7d&NRORIGINALURL=%2fbsc%2fpublic%2fas%2fau%2fen%2fdlf%2fdownload_top%2ehtml%3freg%3das%26c%3dau%26lang%3den%26prod%3dmfc4800_as&NRCACHEHINT=NoModifyGuest&prod=mfc4800_as®=as&c=au&lang=en

  Above is the link for your model printer MFC 4800 drivers.

  If you click on drivers in STEP 1, then STEP 2, check for the operating system, you will see that Vista is not an option, and so the Vista drivers were never written for this model of printer by brother.

  They rely on drivers XP to do the work for them.

  Brother is the one who wrote the drivers for its hardware, not Microsoft.

  I suggest that revisit you brother and ask them when they wrote the so-called Vista compatible drivers for Microsoft.

  It's all brother wrote for your model:

  MFC-4800 > downloads

  Downloads

  Manuals

  Frequently asked questions & troubleshooting

  Utilities/Windows Vista®

  Resolution improvement tool scan (WIA)

  Language	Version	Size	Release Date	File
  English	B	0.06 MB	03/05/2007

  Version B

  Version A

  This tool will expand the capacity of maximum scanning resolution and allow you to scan legal-size documents. Depending on your environment PC, the utility is available only in English, but will work with a PC configured or installed with a different language.

  1. Create a temporary directory on your drive HARD to save the downloaded file, for example C:\bront
  2. Start the download.
  3. Once the download is complete, double-click the downloaded file to extract it.
  4. Double-click the file "BrScUtil.exe".
  5. Select a WIA device, resolution and scan size and click on 'OK '.

  See you soon. Mick Murphy - Microsoft partner

• I have Windows Vista 64 bit, but I need to use a 32-bit software

  I have a new computer with Windows Vista 64-bit and I need to use a program he wrote in 32 bits. The computer maker refused to get off my computer to Windows Vista 32 bit. They offered me to return my new computer (keep restocking fees) and buy an older version of the computer that is also 64-bit, but they are allowed to downgrade it. This 32-bit software is vital for me and now I'm stuck with this useless computer.

  Can I run 32-bit programs on a 64-bit computer?

  Most programs designed for a computer running a 32-bit version of Windows running on a computer running 64-bit Windows versions. The notable exceptions are many antivirus programs, and some hardware drivers. Drivers designed for 32-bit versions of Windows do not work on computers running a 64-bit version of Windows. If you try to install a printer or other device that only has 32-bit drivers available, it won't work correctly on a 64-bit version of Windows. If you don't know if there is a 64-bit driver available for your device, go online to the Vista Compatibility Center"" href = "http://go.microsoft.com/fwlink/?linkid=142444" > Windows Vista Compatibility Center

  . http://windowshelp.Microsoft.com/Windows/en-us/help/41531554-d5ef-4f2c-8fb9-149bdc5c8a701033.mspx#EDH

  It should work OK Mick Murphy - Microsoft Partner

• Internet worked well until I have Reinstalled windows vista 64 bit, now my Internet does not work, says that I don't have a driver from the Internet.

  Internet worked well until I reinstalled windows vista 64 bit on my Dell laptop, now my Internet does not work. Went into Device Manager and there is no network adapter. I tried to reinstall the driver that came with my laptop disk but it doesn't seem to work, says that I need an updated driver. I don't know what else to do, I have to install a new driver from the Internet? Ugh becomes very frustrated!

  http://support.Dell.com/support/downloads/index.aspx?c=us&l=en&s=Gen

  Go to the website of the manufacturer of your computer/laptop > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  The computer you are using now if you have an Internet connection with the other > download / save drivers > copy them into Flash Drive > transfer / install on another computer/laptop.

  See you soon.

  Mick Murphy - Microsoft partner

• Bluetooth Driver required for DROIDX on Windows Vista 64-bit

  I don't know what version of the android OS that I use, but for me, my wife bought my DROIDX on December 19, 2010.

  I have discovered and twinning between HDLaptop and my DROIDX, but I can't seem to connect.  Since combining upward, I get a message from Windows Vista 64-bit:

  "Windows needs to install driver software for your Bluetooth device.

  My options are:

  Locate and install driver software (recommended)

  Ask me later

  Do not show this message for this device

  When I have Windows looking for the solution it always fails.  As I usually am connection and go to work, I usually choose ask me later.  But I just restarted and there is only the screen asking me all over again.

  But, in this sense, I bought a Samsung WEP460 handsfree.  I can't get the DROIDX to see this thing at all, but I just got paired up with my HDLaptop.

  When searching on the internet for a device for my droidx bluetooth driver, I noticed that everybody seemed to have driver problems with 64 bit versions of Windows Vista or Windows 7.

  It's apparently a nagging question that must always be treated, or everything what is the big deal here?

  Thanks, I await your help to solve this issue...

  -Doug

  
  

• Driver satellite A210 - 16G Mass Storage Controller for Windows Vista 32-bit

  Hello, I need driver Toshiba Satellite A210 - 16G Mass Storage Controller for Windows Vista 32-bit. If you have the installation file, please redirect me if you have any other file, please explain to me where to install it.

  If I were you I would take a look at the site to download the drivers from the main Toshiba page, because you will find everything you need.
  The mass storage controller can be the HARD drive controller or the controller of the SD card. I want to download both of them.

  Here´s a direct page link drivers: http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

  Welcome them

• installed the game CD Gears of War on my computer (Windows VISTA) and make me "Please insert the correct DVD - ROM, click OK and restart the application" - but the disk is IN the drive.

  original title: Gears of War for PC (Vista)

  I installed Gears of War game CD on my computer (Windows VISTA) and make me "Please insert the correct DVD - ROM, click OK and restart the application" - but the disk is IN the drive.  I've been on the net and does not know what is the problem and why this game will not run.  I've installed, uninstalled, reinstalled tried to run as administrator, got the latest patch, all the things that have said all sites to do - anyone have any ideas?  Any help would be appreciated!  Thank you!

  Hi NoOneSpeciale,

  It is very possible that your CD may be damaged.  Is it possible to get another copy to try on your machine? Or try this copy on another machine to see if it works or not.
  Also check in control panel--> system--> for you Device Manager make sure that there is no yellow/red icon next to the CD player and it's function correctly.

  Let us know the result, Kevin
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• HP Photosmart C4680: HP Photosmart C4680 driver for Windows Vista 32-bit

  I can't find the HP Photosmart 4680 for Windows Vista 32-bit driver. The HP Web site has only the driver for Windows 7 and newer. I tried to install this driver, and obviously it did not work. Can anyone help? Thanks in advance.

  HI @rtraveler,

  I understand that you need drivers for Windows Vista. I'd love to help you.

  I have provided the link to the Windows Vista drivers.

  All-in-one HP Photosmart C4600 series printer full feature software and driver.

  If you appreciate my efforts, please click on the "Thumbs up" button below. Thank you.

• Messages to update Windows Vista 64-bit driver for Qosmio F30 Vista 32 bit

  Hello

  Today, I noticed that, update Windows Vista displays the bad update for one of the drivers of Qosmio F30.

  I have Windows Vista 32-bit, but Windows Update post a 64 bit version of the driver.

  See the screenshot [here: http://imagefilehost.googlepages.com/f30Wrongupdate.jpg]

  Any idea?

  Hmm... it's strange?  :|

  The ACPI from Toshiba x 64 compatible driver certainly means a 64-bit version!

  I put t know why Vista driver update notification indicates a 64-bit to a 32 bit OS driver, but usually the 64-bit driver should not be compatible with the 32 bit OS.

  However, the deal seems clear don t install if the pilot is not designed for your operating system.

  Concerning
  …

• Windows Vista 32 bit OS. Corrupt or missing files and error msg "invalid parameter."

  Windows Vista 32 bit OS. Corrupt or missing files and error msg "invalid parameter."

  Original title

  I don't understand what you mean by "title". You want a test?

  Hello cock.

  Please see the TechNet wire which may be related to your current number:
  http://social.technet.Microsoft.com/forums/en/w7itproinstall/thread/d1d5e820-4b3f-4848-8861-8c0736c5fd1a

• DRIVER FOR CANON LBP5000 FOR WINDOWS VISTA 64-BIT

  Can someone tell me how to connect a Canon LBP5000 laser printer to my Windows Vista 64 - bit computer, it doesn't seem to be a driver available from Canon.  It is likely that they will make one available? -Andrew

  Canon provided now 64-bit drivers on their European website.

  You can get them here:

  http://software.Canon-Europe.com/software/0038040.ASP?model=

  They say that he supports the following operating system

  Windows 2003, Windows 2008, Windows 7, Windows Vista, Windows XP

  Seems to work quite well in Win7, but I noticed that I kept getting "out of paper" errors, what paper size was misconfigured, then maybe driver is still a little buggy.