Get a stereo track of a channel to be mono

Similar Questions

• How to DIVIDE a TRACK STEREO L & R CHANNELS INTO TWO MONO CHANNELS

  Does anyone know if this is possible: how to DIVIDE a TRACK STEREO L & R CHANNELS INTO TWO MONO CHANNELS?  There must be a way, but I can't find how.

  I recorded a podcast - me and a guest, with each microphone goes to its own mono channel. When I opened it in hearing he mixes in a stereo channel.

  Thanks in advance for any help.

  Best,

  Shawn

  Once you have opened the file in the waveform editing view go to menu Edit "excerpt from the channels to mono files.

• How to complete the two channels of a stereo track in a mono track?

  I have recorded on the L channel a stereo recording with the interviewer and the interviewee has recorded on the channel of a. I applied the two fill 'right' and 'left fill' to the runway, then cut and switch between the two, when appropriate. However, when they are all two talk, I'd like that the two channels to be active, but not as a stereo track (because otherwise the sound is actually mono) and turning on the two "fill right" and "fill left" at the same time seems to feed each channel at 50% instead of 100%, at least that's what I guess since there is a significant drop in level.

  Any suggestions? I'm on CS6.

  OK, here is the solution I've worked.

  I created a new track to mono submix at the bottom of all my songs. In the Audio Mixer Panel, I remapped my stereo audio track to go to the mono submix track before going to the master. This forces all the audio out as that mono the end, which is exactly what I was looking for.

  For what it's worth, one track stereo padding right or double left audio and is stronger then the railway normal stereo, even if she plays two audio channels, they don't add to the intensity of the double mono. I just applied a + 4dB gain stereo sections to compensate for this.

• Pierce the stereo track on two mono tracks

  First 12 items. iMac. I have records with mono on a stereo track, the other track is empty. How to divide the track stereo to mono sound on both stereo channels? By using both channels on my video camera for different sounds, for example two people talking with separate pickups is a normal way of shooting. But the audio ends up as a stereo track when they are imported into Premiere Elements, and I have found no way to separate the tracks so you can work with them individually.

  Go to the effects / Audio and use effect or fill right or left to fill in to spread the mono track on both channels.

• Why the prores files original with stereo tracks into first on the single audio track?

  Why the Prores files original with stereo tracks into first on the single audio track?

  Here are a few ways.

  Adobe Premiere Pro CC: Separate Audio channels. Larry Jordan

• Separate stereo tracks already on a timeline

  I'm under CC 2014. I've saved all my audio using a stereo track - there is a LAV left and a right shotgun microphone. I need to be able to adjust the volume of channels independently.
  My problem is that I imported all my images using the settings to 'use the file' in the Panel of audio preferences in first, and then I started to edit.
  I know I should have imported images using the "mono" settings in the audio preferences panel, and when I import images in my project after changing my settings in mono, my audio comes in two separate tracks, which is what I want.
  However, I can't find a way to separate stereo channels titles that I've already imported and started editing with. It is a huge problem, because I have already published a chronology of 30 minutes and won't start again.

  My question: is there a simple way to separate audio channels stereo of a song already on a timeline into two mono tracks?

  If not, is there a reasonable solution that does not change things around on the timeline and replacing the clips one?

  Thanks for your help.

  Hi Mjshade,

  Best practice is to change the configuration of the audio clips in the trash on channels until they reach the timeline. My guess would be: If you have not changed the I/O points on the item in the bin, just right-click on it, choose 'audio channels,' change the preset in "mono" and then alt-make slide the clip on the stereo clip in the timeline panel. When the green outline appears on the clip, take it and it should replace the stereo clip with mono clip with the same clip I/O and the same timeline I/O.

  Good luck!

  Eric D - CoralVision

• EPG does not download properly don't get "no data available" on different channels?

  Original title: EPG DOWNLOADED DO not CORRECTLY GET "NO DATA AVAILABLE" on DIFFERENT CHANNELS?

  I am in the United Kingdom and using MEDIA CENTER on windows vista x 64 and I find that I have big problems getting data from TV stations. There are downloading, then others like bbc and itv that simply say "NO DATA".

  I tried to download the data multiple times and still the same result...

  ID: 5

  VERSION: 2869752824

  TNT - CRYSTAL PALACE

  ID:120020

  TV SIGNAL: DVB - T

  SCHEMA VERSION: 5

  LANGUAGE: ENGLISH

  START DATE 01/01/01 12:00:00 AM

  DATE OF 08/06/2014 END, 19:00

  Show only THE FOLLOWING STRINGS: "No. DATA AVAILABLE.

  BBC ONE

  ITV

  CHANNEL 5

  LIVE LONDON

  DRAMA

  MOVIE MIX

  ITV + 1

  QVC BEAUTY

  CREATE AND CRAFT

  ROCKS AND CO

  FOOD NETWORK

  TRAVEL CHANNEL

  GEMS TV

  CHANNEL 5 + 1

  FILM 4 + 1

  CHALLENGE

  MOVIES4MEN

  JEWELRY CHAIN

  CHANNEL 5 + 24

  QUEST + 1

  TRUE ENTERTAINMENT

  CBS REALITY

  SEE THE MAP

  POP

  BBC R1X AND OTHER VARIOUS RADIO STATIONS...

  ANY HELP WOULD BE GREAT ROGER...

  You should contact your local tv cable company reagarding this problem.

• BlackBerry smartphones can not get a stereo Bluetooth headset to work with Pandora

  I have a BB Storm 9530:

  Is it possible to get a stereo Bluetooth headset to work with Pandora?  Or it only works with the 3.5 mm headphone and internal speaker?

  I use my headset for Moto Rokr BT very well with Pandora. While the music is playing, try to hit the button options and see if you get an option to transfer to Bluetooth

• Back 2 Mono tracks on 1 stereo track on the timeline, or source monitor?

  I worked in first Pro CS 5.5 and I went Audio on a clip to 2 Mono tracks instead of its original 1 stereo track. I brought in the Source monitor, and then on the timeline.

  Then I realized later that I wanted to switch the sound to 1 stereo track instead of the 2 Mono tracks.

  I couldn't find a way to do it.

  It is possible to do this? In the affirmative. How?

  Thanks in advance?

  I pan 2 mono tracks left and right then nest.

  Nest sequences

  Note:

  Beware of any disposal or cancellation.

• Want to multi-track out but getting only stereo - first CC

  I have a quantity of video and audio files to Wav - Poly 8 tracks that have been sync be with Pluraleyes.  I saved the XML of Pluraleyes code and then imported it into first CC.  That generated a sequence with two audio tracks (embedded) original from the video files like titles 1 + 2 and the other eight titles of master recorder range as from 3 to 10.  When I play the sequence I see levels bounce back in the Mixer Panel audio clip through all 10 tracks, but when I output to a file MXF OP1a to 10 tracks I get audio only on tracks 1-2 and silent through 3-10.

  I have a sequence with 10 mono tracks on them and I would like to export as a MXF OP1a with 10 audio tracks separated.  Any suggestions?

  You create a sequence with the release of the multichannel value master fader.

  See here:

  http://strypesinpost.com/2012/11/exporting-multichannel-QuickTimes-in-Premiere-Pro/

  If you work with mono elements, one thing you need to do is to make sure that you move all the tracks to make sure track a spell to the odd numbered main track that you assigned to.

• 1 stereo track-> 2 Mono tracks in first CS6

  Hello

  I ve had a few clips with a Sony EX3. CH1 was the Japaner and CH2 my external microphone.

  I have already imported into Premiere CS6 clips.

  If I drag the clips in my calendar, I get a track stereo Audio (CH1 and CH2 together).

  How can I get 2 separate Mono tracks just in my calendar?

  Thanks for the help!

  Select all the items in the Panel project, just click, change audio clip, and select as below. This is one of my clips EX1r

  

  To do this, before putting anything be it in the timeline panel.

• Satellite A100-192: is it possible to get a stereo sound then more?

  Hello

  Is it possible to get more then stereo with this laptop?
  I have a Creative analog speakers 5.1, I know there is no way to connect all of them, but there are 2 outlets I could connect it as 2.1.
  Y at - it a tool that would allow me to connect the subwoofer to mic jack?

  If not then how to use the Realtek HD?
  I guess that's a defeat not large HD.

  Best regards
  Krystian

  Hello

  As far as I know the audio line output S/PDIF jack is not available on this device.
  You can use the headphone jack to connect for example the HiFi to your laptop.
  Additional laptop has a preinstalled application called Toshiba Virtual Sound.
  This program aworks as a file server audio using SRS TRUsurround XT, SRS WOW HD and SRS Circle Surround such functions.
  The audio filter allows you to enjoy the sound and music of highest quality on your laptop.

• get the number of wired physical channels?

  Hello

  I need to create a Subvi, and in this sub - VI, it is important to know the number of physical channels connected to the entrance of the Subvi.

  Is the only way to do than writing another "channel search and County" - Subvi, which examines the "physical" channels - wire? Something looking for a ': 'and',' and who treats this information then.

  Or is there a better way to do it?

  Or has someone already written such a Subvi, which counts the number of channels wired?

  Thank you very much

  Andy

  If you ask to know how many channels is in a physical channel DAQmx? If so, just the physical channel to Unflatten DAQmx channel chain wire. You'll get a table. The size of table function will give you the number of channels.

• First Audio interpretation is a track with multiple channels.

  We have 4 audio channels, sometimes 5 or 6 channels (component of integrated audio system, LAV, ramps, etc.). All these channels are in a wav file.

  I want that first pro to interpret these data so that it uses only ONE piece on the timeline, with all the channels that have been heard in this track.

  I watched this tutorial, thinking that it would:

  http://TV.Adobe.com/watch/short-and-suite/mapping-audio-channels-in-premier...

  However, for some reason I can't find an option to do what I want. Did I miss something in the window change Audio channels? I can set the number of tracks to 1, however, it does not allow several channels...

  Now, if this IS possible... Can I still change each channel individually in first?

  I appreciate your response and your knowledge.

  Thank you.

  
  

  Sorry, I couldn't find a post edit...

  But this post saved my life, for all who have had the same question!

  Dealing with multiple audio channels in a track: Adobe Premiere Pro

• Can I register with this program a track split 16 channels simultaneously when connected to a mixer? If I can, how can I do it?

  I need to record a track 16 channels with my blender.

  Hi John,.

  If you want to save 16 entries separated for unique pieces, you will need an audio interface that supports a large number of simultaneous tracks.  Your table of mixing will also be able to output of each track separately.  You don't mention what mixing table you use, but many devices are available now, which are a mixer and an audio device in a single unit.  Mixer can be used as the control interface of the application as well as the audio device entry and playback.

  Maybe if you told us what mixer you are using and what audio device you have, we can elaborate on what might be needed or how to set up in the hearing.

  Thank you.