Pierce the stereo track on two mono tracks

Similar Questions

• Is it possible to set the stereo output to mono in Windows 7

  Stereo to mono in Windows 7

  I looked everywhere in the settings of the sound and the accessibility settings in Windows 7. I can't find THE settings for the computer stereo sound to MONO.  I have the card REALTEK sound integrated on my Gigabyte motherboard.  I checked the settings as well.  The ONLY thing I've been able to do is to change the balance, and it does not solve my problem.  You see, I'm deaf in my left ear, so stereo records that I listen to with headphones on, I miss a lot of the sounds within the music or movie or whatever I'm listening.  On my Mac, all I have to do is click on a button in the settings, and the computer will play the stereo sound from TWO speakers, which is what I want on my PC.  I can't believe that this feature is not available in Windows 7.  Any ideas?

  Right-click on the volume icon in the taskbar > playback devices > select device > configure > choose Mono > then click > click on finish

  is theres another longer way to do this too just make a single lane on the spot but still running two-speaker MONO BAM

• How to put two mono tracks in the usual stereo display in the edition of Audition 3 mode?

  Hi guys,.

  Previously, I had no problem simply using Adobe Audition 3 for simple recording and editing of a stereo stereo power not from mixer... well almost no problem... :-)

  Today, I'm having a bad day, or maybe it's because I'm used to be retired... :-)...

  Query: How can I put two mono tracks in the usual stereo display in Edit so they both display correctly there?

  • Put simply, I have two mono wav files. Let's call them Left_wav and Right_wav.
  • I can't seem to get imported into a new clean Edit (Normal stereo track route) view that Left_wav is half top and Right_wav is on the bottom half.
  • Whenever I try, I just get either Left_wav or Right_wav taking up the whole of the edit view. that is, it shows just a track.

  Anyone who is familiar with hearing 3 help kindly can? I'd appreciate a simple step-by-step... I can't see where I'm going wrong, and it's driving me bananas :-).

  Thank you

  There are different ways to do the Audition 3. Here is one.

  Open two mono files separately in the edit mode. Then convert Left_wav in stereo by going to the types of samples to change/convert then under stereo channels with Mix of 100% left and right 0% mixture. This will give you a new stereo file with Left_wav on the top channel. Then go to the Right_wav and copy it to the Clipboard using edit/copy. Return to your new stereo file and activate right channel change only in the right channel Edit Channel/edit/change. Then make sure that the cursor is at the beginning of the stereo file and paste Right_wav into the channel at the bottom of the new stereo file. Finally, save as.

• How to complete the two channels of a stereo track in a mono track?

  I have recorded on the L channel a stereo recording with the interviewer and the interviewee has recorded on the channel of a. I applied the two fill 'right' and 'left fill' to the runway, then cut and switch between the two, when appropriate. However, when they are all two talk, I'd like that the two channels to be active, but not as a stereo track (because otherwise the sound is actually mono) and turning on the two "fill right" and "fill left" at the same time seems to feed each channel at 50% instead of 100%, at least that's what I guess since there is a significant drop in level.

  Any suggestions? I'm on CS6.

  OK, here is the solution I've worked.

  I created a new track to mono submix at the bottom of all my songs. In the Audio Mixer Panel, I remapped my stereo audio track to go to the mono submix track before going to the master. This forces all the audio out as that mono the end, which is exactly what I was looking for.

  For what it's worth, one track stereo padding right or double left audio and is stronger then the railway normal stereo, even if she plays two audio channels, they don't add to the intensity of the double mono. I just applied a + 4dB gain stereo sections to compensate for this.

• How to DIVIDE a TRACK STEREO L & R CHANNELS INTO TWO MONO CHANNELS

  Does anyone know if this is possible: how to DIVIDE a TRACK STEREO L & R CHANNELS INTO TWO MONO CHANNELS?  There must be a way, but I can't find how.

  I recorded a podcast - me and a guest, with each microphone goes to its own mono channel. When I opened it in hearing he mixes in a stereo channel.

  Thanks in advance for any help.

  Best,

  Shawn

  Once you have opened the file in the waveform editing view go to menu Edit "excerpt from the channels to mono files.

• Back 2 Mono tracks on 1 stereo track on the timeline, or source monitor?

  I worked in first Pro CS 5.5 and I went Audio on a clip to 2 Mono tracks instead of its original 1 stereo track. I brought in the Source monitor, and then on the timeline.

  Then I realized later that I wanted to switch the sound to 1 stereo track instead of the 2 Mono tracks.

  I couldn't find a way to do it.

  It is possible to do this? In the affirmative. How?

  Thanks in advance?

  I pan 2 mono tracks left and right then nest.

  Nest sequences

  Note:

  Beware of any disposal or cancellation.

• Get a stereo track of a channel to be mono

  Hi all.

  I recorded some footage using a microphone attached on 1 input of the camera and to the two entry I turned off.  the result was what one channel of the stereo pair has sound on it.

  I would like to know how can I get the right channel to set up in the middle in first so that it puts them on both speakers.

  Is it possible to change a stereo track in a mono track or is it all plug Audio will allow me to pan the channels independently or what I have to keep the sound of his stand and he do.

  Thanks in advance.

  Clip > Audio > the channel mapping

• Why the prores files original with stereo tracks into first on the single audio track?

  Why the Prores files original with stereo tracks into first on the single audio track?

  Here are a few ways.

  Adobe Premiere Pro CC: Separate Audio channels. Larry Jordan

• Out of the Audio tracks in Mono

  I record with both a shotgun (left channel) and microphones Lav (right channel) and the final product will be delivered as mono using one channel or the other, how can I do a mono channel while stilll retaining the other channel, so I can switch between them on the timeline if necessary?

  Thank you!

  Before using the clips in a sequence, you can select them, right-click and select Edit > Audio channels and all the mapping in Mono. He will perform the stereo left and right as two mono channels, and they change into a sequence in this way.

  You can also use the Mono command escape (Clip > Audio Options > Breakout to Mono), but it creates new audio only of the main elements that are more related to the video. It creates no new media, even if - only master clips.

• Alternating the problem of Capture DV Mono or stereo

  I'm captures old video tapes digital (not analog bands although it happened there also) in v.2015.4 Premier Pro. From a single band that I captured several segments. The video is very good, in all but one of the only audio capture happens on a single 16-bit stereo channel as it should, but in the first capture of the Ribbon comes on 4 different channels 16-bit - Mono 4. Channels 1 and 2 are probably L & R tracks although I see no difference in the waveforms. Chanel 3 and 4 are empty. The original recording is in stereo. It is a bit of a pain because two audio tracks need to be adjusted independently and not as a single setting performing simultaneously the two L & R. I can miss some audio information too. Is there a way to set capture and audio settings always comes as a simple stereo channels, I can't find.  Or?

  Help appreciated.

  Greg

  It is a good alternative.  Thank you.

  But I think that I thought about it. I got to thinking a little deeper and more logically. It is only the beginning of a capture of Ribbon and remains so through the balance of this particular shot, no matter how long. In addition, I realized it only happens when I start the initially absolute capture of the band, on the head or the Virgin band HDDR. When I moved the band on a spot just a few images in the recorded video real audio capture although stereo. As I think about it, it makes perfect sense.  There is a signature on the tape for audio, or mono or stereo, as the capture begins. The default value must be mono that it holds in all of the capture.

  Problem solved.

• Separate stereo tracks already on a timeline

  I'm under CC 2014. I've saved all my audio using a stereo track - there is a LAV left and a right shotgun microphone. I need to be able to adjust the volume of channels independently.
  My problem is that I imported all my images using the settings to 'use the file' in the Panel of audio preferences in first, and then I started to edit.
  I know I should have imported images using the "mono" settings in the audio preferences panel, and when I import images in my project after changing my settings in mono, my audio comes in two separate tracks, which is what I want.
  However, I can't find a way to separate stereo channels titles that I've already imported and started editing with. It is a huge problem, because I have already published a chronology of 30 minutes and won't start again.

  My question: is there a simple way to separate audio channels stereo of a song already on a timeline into two mono tracks?

  If not, is there a reasonable solution that does not change things around on the timeline and replacing the clips one?

  Thanks for your help.

  Hi Mjshade,

  Best practice is to change the configuration of the audio clips in the trash on channels until they reach the timeline. My guess would be: If you have not changed the I/O points on the item in the bin, just right-click on it, choose 'audio channels,' change the preset in "mono" and then alt-make slide the clip on the stereo clip in the timeline panel. When the green outline appears on the clip, take it and it should replace the stereo clip with mono clip with the same clip I/O and the same timeline I/O.

  Good luck!

  Eric D - CoralVision

• See the Master track is missing?

  I'm sure it's under the "track" before, but now he's gone. Any thoughS?

  To see the master of track... Make sure that it is enabled in the mixer view...

  

  However, I think you are looking for, what is now called the track output, found under railway > track display output...

  Show Master track is found only in this menu if the project has a Surround track...

  See the output track is on this menu for projects have only Mono or stereo tracks... and no Surround sound elemtns

  More info here... (Post excellent read Edgar in this thread)

  I can't seem to find the place where to display master follow it please help

• Audio entering on the wrong track

  I am new to Adobe, using CS5 on 64 bit win7 computer. I was working on a sequence with 4 titles. Everything worked fine, and then suddenly the audio for the video I was falling on my trac timeline 1 started coming in the sequence on a new audio track 5. She fell not on the audio 1 track and the program creates automatically audio track 5. Audio track 1 is not locked. Someone has an idea of what past? I think I probably did something to cause this but have no idea what.

  Most likely, these clips were a type of audio which does not correspond to the already created audio tracks, so a new correspondent is created by Premiere Pro.  (i.e. Mono on mono, stereo track on a stereo track, etc.)

• Disorder of the audio track

  I am unable to name an audio to any audio track I want. Instead of highlighting 'Audio 1' and to have the 'A1' beside that it only lets my fall on the background audio track. I'm unable to move and when I lock the audio track and then drop an audio clip on the timeline, it creates a new track! Y at - it something I am doing wrong? It happened, and then it was fine later, so I'm not sure if this is a bug or if I accidentally checked a box etc...

  Thank you

  Hey man,

  The audio tracks are predefined for mono, stereo or sound 5.1 etc. So if you drag its mono for example to your audio section in the sequence, PP it automatically on the track that is predefined for mono. If you want to change it you should do in your project settings every time that you start a new project.

  Sébastien

• Can I fade in and out on the same track several times in After Effects?

  Hi all

  I was wondering if it is possible to fade in and out, on the same track, several times. Like, I have this audio I want to fade at the beginning-48db to + 0 dB, and at the end of the song I want it to go from + 0 dB to-48db. I don't know if it's possible, but I can't get it to work. Can I get more than two keyframes for the same way?

  Thank you for taking the time to read my question.

  Marco van Lindt

  I do not recommend the use of AE to do any sort of audio work, but yes. You can have hundreds of keyframes by track. If you set the value, we must add another keyframe. There is no that?