How to complete the two channels of a stereo track in a mono track?

Similar Questions

• How to tie the two serial numbers using test including the tie in the database.

  I have two separate committees, I need to link the serial number too.  One is being tested as a separate unit, then the two are tested together, I need to make sure that I connect them in the database.  Don't know how to do it, looking for any input I can get.  Using a labVIEW vi to request the entry of a Board, and then use information interface to USE testbed for UUT of the hand.

  I have juries, one of the boards, A onboard, was tested by a different sequence file, then A is connected to Board B, and then they are tested as a complete set.  Received a few suggestions on how to save the two serial numbers, but went with a popup message added types of step (modified record results), and then just have the user scann the second number in and it stands as one of the results of the step in the database.

• I try to combine a picture of my sister with a picture of a poem next to her. How to combine the two into a single photo?

  Paint or Windows Photo Gallery

  I try to combine a picture of my sister with a picture of a poem beside it, how to combine the two into a single photo?

  If you have the poem recorded in an image format,
  the following freeware can create a side by side
  Panorama.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Download IrfanView
  http://MajorGeeks.com/IrfanView_d4253.html
  (filename: iview433_setup.exe)
  (uncheck if you don't want Google Chrome)

  Download plug-ins too...

  IrfanView plugins
  http://MajorGeeks.com/IrfanView_PlugIns_d4908.html
  (filename: irfanview_plugins_433_setup.exe)

  When the program is installed... read more...

  Open IrfanView and go... Image / create the Image of the Panorama...
  (this will open the screen to "Create a panorama image")

  On the screen to "Create a panorama image"... left click on the add images"" button.
  (Displays the 'Open' screen. Now, drill down to the
  the folder that contains your saved Photos of veterinarians.

  Now... click left (highlighted), the two images, you want to join.
  (you can select more than one if you hold down your Ctrl key)
   
  The two images highlight... left click on the button 'open '.
  (Or... you can add the images one at a time... which is always easier)

  Now, go back to the screen "Create the panorama image.
  and the file names of the selected pictures need to be in the
  Field "Input Images.

  Now with the names of two files in 'Images of entry' field...
  You can left click on the button 'create Image '.

  (the positions left and right of these images can be swapped in)
  selection of a file name and using the "mount image" / "Move."
  Images down"buttons...)

  Now you should see a display of the combined image.
  Reach... File / save as...

  Choose a backup location / enter a file name / choose a format...
  On the left, click on the button "Save..."

• How to break the two folders that are cross-linked?

  I tried to move C:\users\richard to E:\My Documents ' My Documents'.

  Some how the two directories have become reticulate.

  Make any change in directory caused the same change in the directories of the sentence.

  How to restore the two inventories back to normal?

  I tried to move the directory in E:\ back to C:\, but received a parsing error.

  TIA,

  Richard

  Wednesday, February 5, 2014, 17:20:47 + 0000, Richard332 wrote:

  I tried to move C:\users\richard to E:\My Documents ' My Documents'.

  Some how the two directories have become reticulate.

  Make any change in directory caused the same change in the directories of the sentence.

  How to restore the two inventories back to normal?

  I tried to move the directory in E:\ back to C:\, but received a parsing error.

  The directory c: is not really a directory; It is a library which is
  just a pointer to the real directory on E:, a bit like a shortcut.

  So if you get there via the library or the directory, you are in
  in the same place - E:\My Documents and any changes there are also
  See in the library.

• Why the prores files original with stereo tracks into first on the single audio track?

  Why the Prores files original with stereo tracks into first on the single audio track?

  Here are a few ways.

  Adobe Premiere Pro CC: Separate Audio channels. Larry Jordan

• measure with the two channels of the virtual bench simultaneously in labview, error 375903

  Hi, I am trying two measurements simultaneously using two channels of analog input of the virtual bench. I chose the channel MSO 1 and 2 for the measures but I get error 375903 returned evewry time say the requested resource is reserved. I'm not under any other software which should use the virtual bench. The error occurs when I'm initializing the session, even before a measurement was made. Can someone tell me how to call each channel so that I don't get this conflict of resource reservation?

  I have included the VI and a screenshot of the error.

  Thank you!

  NGKai wrote:

  Hi, I am trying two measurements simultaneously using two channels of analog input of the virtual bench. I chose the channel MSO 1 and 2 for the measures but I get error 375903 returned evewry time say the requested resource is reserved. I'm not under any other software which should use the virtual bench. The error occurs when I'm initializing the session, even before a measurement was made. Can someone tell me how to call each channel so that I don't get this conflict of resource reservation?

  ASM takes only supported a session unique instrument and your VI uses two. To use both channels, delete the second session MSO and specify channels in the MSO configure Analog Channel.vi

  Here's an example that uses two channels brought:

  VirtualBench: Bode Analyzer with the FGEN and MSO

  http://www.NI.com/example/52076/en/

• How to control the two analog outputs at a time

  I'm new to LabVIEW and have some problems in DAQmx with control outputs analog multiple.

  I want to set up a platform using BNC-2110 and PCIe6363 to control two rotating mirrors. The problem that I can only give an output (AO0 or AO1) at a time and I really have no idea how revise my LabVIEW diagram to control two outputs at the same time I met. I tried to change the outputs and it keeps a mirror turning instead of the old. Could someone help me with my problem and I would really appreciate. This is my blocked diagram and front.

  

  

  Hi zrmaker,

  As mentioned by RavensFan, you should not create 2 analog outputs different tasks if you use AO0 AO1. To your façade > physical control or the channels > select the drop-down list of the control channel physical (s) > Browse > hold down the CTRL + select the AO0 and AO1 > Select OK. Once this is done, you will see that your control or the physical channels has the following input values: "Dev1 / ao0:1" which means that you will access to AO0 AO1.

  In regards to writing DAQmx, simply select Analog > multiple channels > samples multiple > 1 waveform (you should get the following: 1 d Analog Waveform NChan NSamp). Once done, you can just use table build to combine 2 different waveforms and plug in this table to DAQmx writing output. The first index will be the output for AO0 value and the other will be for AO1.

  You can check this link on how to read or write from several channels: http://digital.ni.com/public.nsf/allkb/0C1ADEF06A54AB2D862575040066FD51

  Additional reference:
  http://www.NI.com/white-paper/2835/en/

  Hope that helps.

  Warm greetings,

  Lennard.C

• Merge with VB Script ascii_diadem_9.1_or_later.zip .csv files: how to add the column/channel with filename

  Hello

  I use ascii_diadem_9.1_or_later.zip to merge the data from several .csv files.

  The problem is that I am so some weird futuristic timestamps in a channel

  which do not appear in the original .csv files:

  How to adjust the VB Script automatically adds a new channel to the a .csv resulting

  file with the original name of the .csv file for debugging purposes?

  Any help is greatly appreciated!

  Thanks, Katharina

  Hi Katharina,

  What happens when you drag your tiara BROWSER or Windows Explorer data files in the data portal?  See all date/time values in a table in VIEW of this channel?  The problem may be that you do not have a use but which properly load your data files.  The example is designed to show you how to concatenate several files of data together, but assumes that you could provide / have your own use.  If you use work already, then look for these lines to the top of the VBScript and substituting the name of your use "CSV".  If your files have a file extension different "*.csv", then you must also change the line "FileExt '.

  FileExt  = ' CSV files, *.» CSV »  ' « *. DAT; *. CSV '.
  
  Use = "CSV"  ' "' or 'SpecificDataPluginName '.

  Brad Turpin

  Tiara Product Support Engineer

  National Instruments

• How to use the two counters to PXI-6280, to read and write at the same time?

  Hi all

  I try to use PXI-6280 counter to generate a command of step motor pulse train.  The idea is to send a number done and known pulse for the engine, which belongs to a system XYZ. The point is, if, at some point, the user or the security system can interrupt the movement. If this happens (and will be... a lot), I will lose the real position, because I don't know how many pulses were actually sent to the engine. That is why I want to use the other cost to count impulses how were actually sent to the engine. I can start any tasks (generating or account), but only the first started task will operate. I met a couple of mistakes and I'm not able to find a solution.

  Is it really possible to use the two counters? I've already done this in a pci system and worked without problems.

  Thanks in advance,

  Giavonna

  Electrical engineer

  I'm afraid that I don't understand your idea. Could explain you better?

  Material of the series M support pointing to an arbitrary digital signals at rates (the clock must be provided from another source, for example a counter).  If you want a digital pulse train finished output and have access to a counter (the two counters if find you another source for your clock, for example the subsystem "output frequency"), you must use this subsystem 'digital output' rather than the output of the counter.  There should be examples in the finder of the example shows how to configure a finished task of digital output.

  Now I'm generating sample clock having a single Timed material Point (the only mode accepts this mode), and configure the counter with finite samples.

  I don't think not just single point NI the hardware, that's what you want.  More commonly, output meter tasks use timing 'Implied', where the release date is implicitly determined by the characteristics of the pulse user-defined.

  Is there a way to stop the production of only one meter when a finite number of pulses has been played in another counter?

  Yes, but it's a little tricky.  You can set a trigger 'Pause' on the output task, with the soruce the break being the internal release of the counter used for the task of entry.  Set the initial value of the counter of entry to 2 ^ 32-N (or maybe 2 ^ 32-1-N, I don't have a system right now to check) where N is the desired number of pulse output.  Together the counter event behavior for the counter edges of County switch output (this is a property of DAQmx export Signal).  When the counter of entry reaches terminal, its in-house production switches, causing thus the task of output to pause.  You can then stop the task in the software (you should be able to use the output of the task of entry counter event to signal to the software when the output is paused).

  Now that I've written that the whole paragraph, I remember something * similar * to work around a limitation of the driver here .  It is not quite the same implementation I described above, but really, you can use a meter output or a counter entry to get the same effect (it could be a good place to start anyway if you want to try this).

  Is there a way to read pulses them how have been generated, without the other counter, counting impulses?

  N °

  Best regards

• How to read the two columns of data in a file of PDM.

  Hi all

  I am reading two data columns for the 2nd of a PDM file two sheets, as shown below.

  

  Two columns of data must then be shared so they can be displayed in a xy chart and also apply a linear adjustment VI. I implemented the graph xy and linear adjustment using a txt file (see below), therefore all the outputs work, however this application with a tdms file turns a little more tax.

  

  

  

  So, essentially, that I don't know how read the correct leaf and therefore the columns in the PDM file and then how to produce the graph xy and linear adjustment of the data types produce. Here's my current attempt, which produces several errors of the type of terminal, as well as not being able to select the exact data in the PDM.

  

  Any help/suggestions/example vi on this asap would be greatly appreciated.

  Thanks in advance,

  Pete

  Also the PDM file viewer. VI helps you easily understand the structure of data files.

• How to read the two columns of data from the Port series

  Hello

  I'm reading two columns of data from the serial port.

  Example:

  52439 52430

  52440 52437

  52209 52214

  51065 51070

  52206 52390

  I use the serial of Visa service and I can read the first column of data from the serial port, but I can't understand how to read the second column.

  I want to both sets of chart data.

  I enclose my VI.

  Thank you for your help.

  The analysis of string function takes a "Format string" on top (with the right button of the function and choose Help, which explains all the entries).  In particular, you can say 'Give me two numbers separated by a tab' and the output will be two numbers (whole or floating, depending on the chosen format).  In particular, %d\t%d specifies a decimal integer, , whole decimal.

• E900 - how to change the wireless channel?

  Hello people!

  I just bought a router Linksys Cisco E900 and hooked it up to my cable Internet. The Internet service that gives me my ISP is PPPoE, fiberlink (100 Mbps).

  I did the whole upward. I've connected my computer (via Ethernet cable) and my laptop (via radio) to the router.

  Now... There are other networks wireless around me. The Wi - Fi channel that my fixed router 1 is apparently - he saw settings. But I can't find a menu anywhere in the gateway of the router (192.168.1.1) I can change the wireless channel bandwidth wireless etc. Can someone tell me if I can change them...? If so, how? If not... that the steering wheel...

  Thanks in advance.

  Check the screenshots below.

  

  

• How to see the two Windows 7 battery status

  I have a few computers laptops xp that use two batteries where I work. We are very mobile with our computers.  And on Window XP, I wouldoften check the individual status of each battery on XP by going to Control Panel--> Power Options. Then, there is a tab that says Power Meter. There he would show details for each battery. Sometimes one is bad and the other is good so I don't want to replace the two.

  In Windows 7, I found that I can see the total charge, by going to the control panel Windows Mobility Center. He shows me the total % of the available battery and I'm fine with that except that I would like to see how he gets the total of the two batteries.  Does anyone know how I can see a status when a laptop / Tablet has two batteries?

  Thank you

  Carol

  Hello Carol,.

  Thanks for posting your query in Microsoft Community Forum.

  The question you posted would be better suited in the TechNet Forums.

  I would recommend posting your query in the TechNet Forums:

  http://social.technet.Microsoft.com/forums/Windows/en-us/home?Forum=w7itproperf%2Cw7itpronetworking%2Cw7itproappcompat&filter=AllTypes&sort=lastpostdesc

  Thank you.

• How to activate the two IPS on VCS starter pack express

  I have the Starter of Cisco Express works with a single IP address using a NAT. This only works inside the LAN. To enable this machine on the internet, I bought the key option to double network interface. I enabled both interfaces, but I don't know how I should configure the two IPS by access from the internet. I tried to activate the static NAT, but it did not work.

  There is only a single default gateway and this is where most of the traffic will be released and which should point to the internet router.

  If you have addresses of internall more than 'LAN', you can simply add additional routes via the administration console.

  As if LAN is connected to LAN2 192.168.150.0/24 and you 192.168.175.0/24 your home and where your laptops

  router for tha is 192.168.150.1 you would add that, on the road to xcommand, add the command:

  xcommand RouteAdd
  *h 'xCommand RouteAdd'
  "Adds and configures a new IP route (also known as a static route)."
  Address(r): "Specifies an IP address used in conjunction with the prefix length to determine the network to which this route applies."
  PrefixLength(r): <1..128> "Specifies the number of bits of the IP address which must match when determining the network to which this route applies. Default: 32"
  Gateway(r): "Specifies the IP address of the gateway for this route."
  Interface: "Specifies the LAN interface to use for this route. Auto: the VCS will select the most appropriate interface to use. Default: Auto"
  

  for the example given, it would be (user admin via ssh):

  xcommand road add an address: 192.168.175.0 LG: gateway interface 24 192.168.150.1: LAN2

  But to be honest I'm not sure jabbervideo it works well with the highway espress in

  a lan environment double anyway.

  As with a vcs - c / e deployment you have the model of the internal and external with vcs

  different hosts where he tries to get funding and then depending on who gets the data

  for the record. It may be that in any case only get you external IP of the vcs-e.

  I would therefore simply deploy a DMZ where the outside and inside can reach the starterpack with

  the same address or even external ip using a NAT that is hosted in LAN1 put directly on a public ip address in a dmz...

  

• How to show the two original and change the line

  I have a table looks to and it store the two original and change lines, how can I get the Original lines both edit? In this case, I want to display the first two lines (all columns are composite keys)

  In the meantime, I use more Partition BY with line number, but I get a line

  flag	APPNO	EXAM TYPE	EXAM YEAR	EXAM MONTH	Object
  Origin	1234567890	HL	2015	01

  Art and Design

  Edit

  HL

  2015

  01

  Art and Design

  origin

  SL

  2015

  01

  Math

  New

  SD

  2015

  01

  English

  Please check this one, I think it can meet your needs.

  SQL> with meta_data (flag,APPNO,EXAM_TYPE ,EXAM_YEAR ,EXAM_MONTH,SUBJECT)
    2          as (select 'Origin',1234567890,'HL',2015,01,'Art and Design' from dual union all
    3                  select 'Edit',1234567890,'HL',2015,01,'Art and Design' from dual union all
    4                  select 'origin',1234567890,'HL',2015,01,'Math' from dual union all
    5                  select 'New',1234567890,'HL',2015,01,'English' from dual )
    6  select *
    7    from meta_data
    8  where exists ( select 1
    9                             from meta_data outer
  10                           where flag ='Edit'
  11                              and meta_data.APPNO          =outer.APPNO
  12                              and meta_data.EXAM_TYPE          =outer.EXAM_TYPE
  13                              and meta_data.EXAM_YEAR          =outer.EXAM_YEAR
  14                              and meta_data.EXAM_MONTH          =outer.EXAM_MONTH
  15                              and meta_data.SUBJECT          =outer.SUBJECT)
  16  /
  
  FLAG        APPNO EX  EXAM_YEAR EXAM_MONTH SUBJECT
  ------ ---------- -- ---------- ---------- --------------
  Edit   1234567890 HL       2015          1 Art and Design
  Origin 1234567890 HL       2015          1 Art and Design
  
  SQL>