Get a virtual machine of the esxi Server 4

Similar Questions

• How to count the number of virtual machines on an ESXi server via command line

  I want to know the number of virtual machines running on ESXi. What is the command so that it...?

  "vim - cmd vmsvc/getallvms"

  This order list of the early running of the ESXi Server virtual machine, but I want the number (integer)

  Help, please...

  Thank you

  M@RK! V

  Hello

  You can use the PowerCLI command to get a VM number:

  SE connect-VIServer-Server "ESXi host or vCenter server.

  (Get-VM-location 'ESXi host') .count

  Elodie

• All virtual machines to an ESXi Server ping

  Hi all

  For a project of mine, I need to create a script that asks for the ESXi server host name,

  and after that start ping all virtual machines that are on the ESXi server.

  I tried to do without success up to now.

  Help will be appreciated.

  Thank you!

  What follows is based on the fact that the VMware tools are installed.

  If they are not installed, you could adapt the script to try and ping displayname VM.

  $esxName = "MyEsx".

  Get-VMHost-name $esxName | Get - VM | %{

  $hostnamePresent = $_. Guest.HostName - don't $null

  {if ($hostnamePresent)}

  $pingable = test-Connection - ComputerName $_. Guest.HostName - count 1 - calm

  }

  else {}

  $pingable = $false

  }

  Select - InputObject $_ - the property name.

  @{N = "This Hostname"; E = {$hostnamePresent}},

  @{N = "responding"; E = {$pingable}}

  }

• Stop and restart the virtual machines in the remote server

  I need to close virtual machines running guests 4 1 ESX from a remote server (IBM System i).

  The remote server in fact control the storage used by ESX and VM OS, so I'll have to scripts running on the remote server that:

  Stop the virtual machine

  Performs maintenance

  Reboot the virtual machine

  I tried to understand the big picture of the reading discussions here, but I'm still confused.

  VMA is to provide the best way for the virtual machines of withdrawal from a script running on a remote server?

  Scripts can I use SSH to connect to the vSphere environment to run scripts or issue the command?

  Thank you.

  vCLI (really its vSphere SDK for Perl), PowerCLI, VI Java, etc are all vSphere SDK to correct and they are a of the client-side bindings different scripts and programming languages which bind to the vSphere API. When I say 'API', I mean using one of these SDK is you use the vSphere API to perform the work.

  The SDK is initiated on the remote server, this can be windows, linux, etc as long as it supports one of these boxes to tools. In general, for admins, you will use either vCLI (vSphere SDK for Perl) that supports Linux and Windows, or if you are more windows-oriented, you can use PowerCLI.

  Documentation has been referenced in my first post, please take some time the documents because they provide much more detail on the use cases for each + a lot of examples with orders. Yet once, there no involved SSH if you use the vSphere API. As I told, vMA is a virtual appliance, you can download and start using if you do not want to install vCLI or PowerCLI on a remote system, this is assuming that you are comfortable in a Linux environment. If you're not, then I highly recommend using PowerCLI, who will need a remote server for Windows.

  Here are a few started getting additional resources:

  vSphere SDK for Perl + vMA:

  Getting started with vSphere SDK for Perl

  Introduction to the vMA (tips/tricks)

  PowerCLI:

  http://www.VMware.com/support/developer/windowstoolkit/

  http://www.virtu-al.NET/2009/11/10/PowerCLI-where-do-i-start/

  =========================================================================

  William Lam

  VMware vExpert 2009

  Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/

  Twitter: @lamw

  repository scripts vGhetto

  Introduction to the vMA (tips/tricks)

  Getting started with vSphere SDK for Perl

  VMware Code Central - Scripts/code samples for developers and administrators

  VMware developer community

  If you find this information useful, please give points to "correct" or "useful".

• Copy Virtual Machine on the ESX Server windows file server (files)

  I made a copy of a computer virtual with Vmware converter and it is sitting on the windows file server, is there a way to copy the files to the server, ESX4?  Something like a copy and paste?

  Thanks in advance!

  Simply right click on the data store you want to place the files on (Summary tab when selecting one of the hosts connected to this data store), select "Browse the data store" and then use the button "transfer files to this data store. You can use it to download a folder or file from a target, that you access from your system. It might make things easier if you create a folder in the store of data first, and then download the files one at a time. Make sure that the virtual machine is turned off when you do.

  Another option might be to vMotion/migrate it from current storage to a data store in the ESX environment. I did not the same type of migration before, it will or will not be, works correctly. I moved files VM from a source, see my workstation, up to a data store that the ESXi host has a connection to before without problem (with the virtual machine powered off course).

• How can access us the Client on a virtual machine on the host ESXi VI?

  Good afternoon, we are evaluating a virtualization solution, our company is small and we want only 3 servers to virtualize, and we want to use one of the virtual machines on the ESXi host, using the Client of VI, so we can use the keyboard and the screen of this server to access virtual machines. Our idea is to use this virtual machine as a workstation.

  Is this possible? or we use VMware server?

  Kind regards

  Cristian Fernández

  It is really not possible. Since the physical ESXi console, you will see only the menus and COS screens.

  Marcelo Soares

  VMWare Certified Professional 310/410

  Master virtualization technology

  Globant Argentina

  Review the allocation of points for "useful" or "right" answers.

• A virtual machine or the template with the same name is already registered. Server error: the specified key name or identifier already exists.

  Hi all

  I have a 5.5 esxi server just the a virtual machine running at the moment. I try to clone this as shown below:

  http://nchrissos.WordPress.com/2013/04/22/cloning-a-VM-without-vCenter-in-ESXi-5-1-free-edition/

  However, I get the error:

  A virtual machine or the template with the same name is already registered. Server error: the specified key name or identifier already exists.

  I have no vcenter (yet), and it's just the 1 vm. The virtual machine is turned off. I get this error regardless of the name, I said that when I choose "add to the inventory.

  All advice appreciated.

  Thank you

  Oh dear...
  you read bad advice on the internet and then you get also the stupid advice here.

  Ignore both!

  If you want to clone a virtual machine by copying - do it like this:

  Create new virtual machine with the wizard.
  Skip creating a disk for new customers.

  In Datastorebrowser copy the original vmdk to the new dir, which has been created by the wizard.
  Reopen the new VM and edit - assign the vmdk that you just copied.

  The procedure of the blog is not supposed to work.
  Sissine trick doesn't make sense either

• Question: Can store virtual machines on the same drive as ESXi?

  I'll be downloading the trial soon and construction of a test at home server. I see that the minimum requirements are that 80 GB for ESXi but does that mean that ESXi needs 80 GB to be run in addition to virtual machines?

  I want to just prepare for the way I need to build it. Will be need ESXi on it's own hard drive must be installed, and then the other hard drives for data storage?

  Welcome to the community - the best practice is to seprate the storage that you House your virtual machines are the disk that contains the ESXi software - I don't think the 80 GB will be inlcude nominal VMFS datastore but I would invest in a disk drive inexpensive in order to give you more storage.

  Another suggestion to get tested as painless as possible - to confirm that the hardware you are using is supported - http://www.vmware.com/resources/compatibility/search.php

• VCenter Server installed as a virtual machine within a ESXi servers it manages?

  Hi all.  I'm new in the world of VSphere... still in my evaluation period.

  I have only a single ESXi server running at the moment but plans to add a second later for high availability, vmotion, increase general capacity, etc.  They are / will be ESXi running on the internal storage and the virtual machines running on a shared SAN.

  Today, I installed VCenter Server 4 on a server at bottom of range/Office that I was carrying around running XP Pro x 64.

  As I was installing I read the guide installation and to my surprise, it seems to recommend that I have installed VCenter Server 4 as a virtual machine on my ESXi host.

  Now maybe I just spent too much time setting up my without new Lefthand requiring a 'witness' during the failover of one SAN to another... but I was under the impression that VCenter Server is not designed simply to host configuration, but is also designed to act as a 'witness' or to take account of quorum whenever a failure scenario occurred on one of my ESXi hosts.  I also noticed the VCenter Server features of a port "heartbeat", which I suppose one would use for the ESXi server heartbeat, but perhaps it is used for "connected mode" with other VCenter servers (I was intending to use only one since it is a small scale installation) I also felt that it would be useful enough to restore a damaged or shot ESXi host.

  So my question is, if my ESXi host dies and it is where I have VCenter Server installed, then high availability will be unable to work?  I guess there are going to be other issues with me unable to access VCenter Server while I have an ESXi host shot, too, as a greater difficulty to get the ESXi up?

  Maybe I'm wrong understand the purpose of the VCenter server... maybe it's not something that's necessary for HA, recovery, etc. and acts only as a configuration tool until something is wrong?  Or maybe I misunderstood the installation guide and they recommend only installing VCenter Server on an ESX box... they don't want this ESX box to be part of the group that manages the server?

  Finally, if indeed they recommend I install this on a ESXi host manages... would I ideally be install this for local storage on the server (where I installed ESXi) or on the SAN (where all my other virtual machines are installed)... or is it just personal preference?

  Thank you!!

  When you add hosts an active hemagglutinin vCenter cluster HA agent is installed on it.  This agent is what is actually the HA.  While necessary to add new hosts in a cluster and configure some specific parameters of vCenter vCenter's agents HA are self-sufficient and can handle HA failover so vCenter is offline.

  You must install the vCenter VM on SAN storage, so that he can use the vMotion, sVmotion, DRS, HA, functions etc. that require a SAN.

  -MattG

  If you find this information useful, please give points to "correct" or "useful".

• Migrate the Virtual Machine Linux to ESXi

  Hi all

  I have VMware Server 1 base on CentOS as operating system with a few VMs, VMS spot on my map of storage with NFS.

  I start converting those VMs with vmware converter 4.0 beta, I convert ESXi virtual machine move to storage even but with iSCSI.

  So far I have only converted machines Windows without problem, now, I try to convert the Linux (ContOS 5),

  After the conversion, I try to turn on the machine, but get a "Kernel Panic"

  Impossible to mount the SYSROOT.

  Please see attach.

  Until I find a solution I return to this virtual machine to the old vmware server 1 and then it works.

  Any idea?

  Thank you.

  Hello

  I don't speak of computer virtual SCSI controller, you can get to know that this process.

  (1) select the virtual machine.

  (2) right click go to properties.

  (3) select the Hardware tab, check for SCSI controller entry there you can see if it's the logic Lsi logic or bus controller.

  Once again something that I want to confirm, during the conversion, you had a SCSI disk for this virtual machine.

  Thank you

  Samir

  PS: If you think the answer is useful please consider rewarding points.

• PowerCLI Script to migrate virtual machines with the same network Source for the new vCenter Server.

  Hi all

  I checked a few posts on the migration to the new vCenter Server virtual machine. But I'm not very good with Powercli and need some help here.

  We have a new vCenter server where we migrate virtual machines from one source vCenter server. Here are two things that I don't know how to connect together to make sure that bwfore we turn on the virtual machine to the virtual machine is connected to its source network.

  Part 1 - this script works well but do not get any network on the vCenter destination.

  cluster = Get-Cluster "clusterA.

  $inventory = get-Cluster $cluster | Get - VM | Add-Member - MemberType ScriptProperty-name "VMXPath" - value {$this.extensiondata.config.files.vmpathname}-Passthru-Force | Select-Object Name ResourcePool, folder, VMXPath |

  $inventory | Export-Csv c:\file.csv

  $inventory = import-csv c:\file.csv

  $cluster = get-group 'b '.

  {foreach ($vm to $inventory)

  $ESXHost = get-Cluster $cluster | Get-VMHost | Select - 1 first

  New-VM - VMFilePath $vm. VMXPath - VMHost $ESXHost - location $vm. Folder - ResourcePool (Get-Cluster $cluster |) Get-ResourcePool $vm. ResourcePool)

  }

  Part 2 - I want to preserve the Portgroup macaddress and the Ip of the virtual computers and connect them to the new vCenter. How can I do this with the script below. Or how can I combine them together?

  $vm_list = get-Cluster-name "clustera | Get - VM test * | Name sort

  $information = {foreach ($vm to $vm_list)

  $network_adapter_information = get-NetworkAdapter - VM $vm

  $vm | Select Name,PowerState,ResourcePool,@{N="Path; E=       {$_. ExtensionData.Summary.Config.VmPathName}},@{N="NetworkAdapter '; E = {[string]: join (":", ($network_adapter_information |))} %{$_. {{(Nom + "," + _.NetworkName $}))}}, @{N = "MacAddress"; E = {[string]: join (",", ($network_adapter_information | % {$_.}))} MacAddress}))}}

  }

  Step 2

  # Unsubscribe virtual machines

  Remove-VM - VM $vm_list-RunAsync Verbose - confirm: $false

  Step 3

  $cluster = get-group 'b '.

  {foreach ($vm to $inventory)

  $ESXHost = get-Cluster $cluster | Get-VMHost | Select - 1 first

  New-VM - VMFilePath $vm. VMXPath - VMHost $ESXHost - location $vm. Folder - ResourcePool (Get-Cluster $cluster |) Get-ResourcePool $vm. ResourcePool)

  }

  # Save virtual machines

  foreach ($info in $information)

  {

  $vmxpath = $info. Path

  $resource_pool = $info. ResourcePool.Name

  New-VM - ResourcePool (ResourcePool-Get-name $resource_pool) VMFilePath - $vmxpath - RunAsync-Verbose | Out-Null

  }

  Step 4

  # Put the network cards

  foreach ($info in $inventory)

  {

  foreach ($network_information in ($info.NetworkAdapter - split ":"))))

  {

  $virtual_machine = $info | %{$_. Name}

  $network_adapter = ($network_information-split ",") [0]

  $network_vlan = ($network_information-split ",") [1]

  Get-VM-name $virtual_machine | Get-NetworkAdapter-name $network_adapter | Together-NetworkAdapter - NetworkName $network_vlan-Verbose-RunAsync-confirm: $false | Out-Null

  }

  }

  # Start the virtual machines

  foreach ($vm to $vm_list)

  {

  Start-VM - VM $vm. Name-RunAsync Verbose - confirm: $false | Out-Null}

  }

  Thanks in advance for any help.

  Hi all

  I made some changes to the script and it worked for me. We have added a host on the destination with all exchanges and storage mapped vCenter.

  $vm_list = get-Cluster-name 'Site B - b | Get - VM | Name sort

  $information = {foreach ($vm to $vm_list)

  $network_adapter_information = get-NetworkAdapter - VM $vm

  $vm | Select Name,PowerState,ResourcePool,@{N="Path; E=       {$_. ExtensionData.Summary.Config.VmPathName}},@{N="NetworkAdapter '; E = {[string]: join (":", ($network_adapter_information |))} %{$_. {{(Nom + "," + _.NetworkName $}))}}, @{N = "MacAddress"; E = {[string]: join (",", ($network_adapter_information | % {$_.}))} MacAddress}))}}

  }

  # Unsubscribe virtual machines

  Remove-VM - VM $vm_list-Verbose - confirm: $false

  $cluster = get-Cluster "Site A - clustera.

  {foreach ($vm to $information)

  $ESXHost = get-Cluster $cluster | Get-VMHost | Select - 1 first

  New-VM - VMFilePath $vm.path - VMHost $ESXHost - location $vm. Folder - ResourcePool (Get-Cluster $cluster |) Get-ResourcePool $vm. ResourcePool)

  }

  # Save virtual machines

  foreach ($info in $information)

  {

  $vmxpath = $info. Path

  $resource_pool = $info. ResourcePool

  New-VM - ResourcePool (ResourcePool-Get-name "test1") VMFilePath - $vmxpath - RunAsync-Verbose | Out-Null

  }

  # Put the network cards

  .

  foreach ($info in $information)

  {

  foreach ($network_information in ($info.NetworkAdapter - split ":"))))

  {

  $virtual_machine = $info | %{$_. Name}

  $network_adapter = ($network_information-split ",") [0]

  $network_vlan = ($network_information-split ",") [1]

  Get-VM-name $virtual_machine | Get-NetworkAdapter-name $network_adapter | Together-NetworkAdapter - NetworkName $network_vlan-Verbose - confirm: $false | Out-Null

  }

  }

  # Start the virtual machines

  foreach ($vm to $vm_list)

  {

  Start-VM - VM $vm. Name-RunAsync Verbose - confirm: $false | Out-Null

  }

  Hope this will help many of you.

• Cannot import Microsoft Windows Server 2008 R2 with Hyper-V virtual machines to VMware ESXi 4.

  Hi team,

  I use VMware vCenter Converter Standalone to import certain Microsoft Windows Server 2008 R2 with Hyper-V virtual machines to VMware ESXi 4, using another Windows Server 2008 R2 as the machine Agent Converter. Well, the agent connects to the Windows VM source very well (I used the net use command to create a line of conduct...), perhaps no chance to connect to the computer target VMware ESxi 4 and make the converter doesn't work...

  Following is the error message:

  "Unable to connect to the host specified" from the converter agent machine. " It is perhaps because the host is not available on the network, there is a problem with the network configuration or management on this host services do not react. Check all components of converter to be able to connect.

  So, my question is; is it possible to create a work around (like the net use Windows command above) to make possible the connection of the converter Agent on Linux VMware ESXi 4 machine Windows machine, to directly import the virtual machines of Windows Hyper-V to Linux VMware?

  Thanks in advance,

  It's even easier than that

  Use this: http://www.winimage.com/

  Which will convert *.vhd *.vmdk, so you don't need to do all this... Of course, another way is to start the machines, leaving them on Hyper-V and go through the network and process virtual machine as physical machines and do a P2V on the network...

• Unable to start the virtual machine after Migration - ESXi hosts

  Last night I wanted to move a virtual machine to a host of test to a production cluster.  All hosts (test and production) have shared access to the same LUN, so I usually am able to simply remove the virtual machines of the inventory in the test environment and add them to the production environment by accessing the .vmx on the data store file.  Two of the 3 hosts migrate perfectly and are running in the production environment.  However, the third server, while the migration starts.

  First he gave me errors that it was missing some files.  The only thing I did was different to rename the folder for the virtual machine on the data store.  It was called 'New Virtual Machine' for a reason, so I renamed it to "Antivirus."  However, something strange happened.  Instead of renaming the folder, it seems was created a new folder named "Antivirus" and the old folder 'New Virtual Machine' was still there.  In addition, the renamed folder 'Antivirus' had only SOME of the files needed.  So I just copied from the old folder in the folder "Antivirus" and he hung up the virtual disk of 20 GB file.  So I closed the VI client and checked the vdmk 20 GB folder and back this morning is in the folder with other files.  However, when I try to start the virtual machine, I get the "cannot access a file because it is locked" error message.

  I've done some detective and I noticed that in my second datastore where was the other folder vdmk, the file was now .40kB in size.  Looks like I've lost my other vdmk folder.  What happens here?

  It looks that the virtual machine was still running when you tried to change the name, so the old folder could not be renamed because of the lock. That's why a new folder has been created instead, and why your vm hung on the vmdk file until the lock has been released. Don't know what happened to the 2nd vmdk file, but the file vmware.log in virtual machine directory must have some info as to why does not start the virtual machine. If the 2nd vmdk is gone, this might be a reason.

  -KjB

  VMware vExpert

  Post edited by: kjb007: changed vm in vmdk

• How to get the host name of the physical computer inside a virtual machine until the user logs in Windows?

  I don't know if this is the right place to post this question, I develop software to support VMWare PCoIP and need to know how to get the host name of the physical machine (which manages the virtual machine and View Client) within a virtual machine before the user logs in Windows of the virtual machine.

  I understand there are two ways to read the host name, via the HKEY_CURRENT_USER\Volatile Environment registry and environment variables, but they are available once the user is connected. I need info before the user connects.

  Is there a VMware API that can be called or asked the host name?

  Thank you.

  Not on the broker, but there are the startup scripts to log on to the computer virtual itself: http://pubs.vmware.com/view-52/topic/com.vmware.view.integration.doc/view_integration_startsession_script.9.2.html

  Note that these executed when a virtual desktop computer allocated connection, not to the point that the client connects - it is possible for the customer to not complete the connection (crash, cancel, network failure) and so any what solution you design must handle this.

  Mike

• What is the interval of time between the virtual machine Linux and ESXi host synchronization?

  I have ESX5.0 with a centos6 installed on this linux virtual machine.

  After the installation of vmware for Linux virtual machine tools, I activated the time synchronization between the virtual machine linux and ESXi host through vmware-toolbox-cmd.

  I wonder what is the interval of time between the virtual machine linux and ESXi host synchronization? If I quickly time OS system, when the OS system time will sync back to the ESXi host?

  According to http://www.vmware.com/files/pdf/techpaper/Timekeeping-In-VirtualMachines.pdf:

  By default, the demon checks the guest only once per minute operating system clock.

  However, depending on whether the guest is behind or in front of the result is different. So, please read the section "periodic synchronization" (at least) in the document mentioned above.

  André