Get error inaccessible target ADF Application performance

Similar Questions

• I am still getting error code 8004ff83 when you perform the update

  I am still getting error code 8004ff83 when you perform the update

  I read that in safe mode, it would be possible to do the update. What is safe mode?

  Hello

  Perform the steps from the link below and check if the problem persists.
  Problems with installing updates
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates
   
  Hope this information helps.

• Getting error while deploying the Application to the cloud

  Hello

  I am getting below error while deploying the application oracle cloud

  [11: 11:06]-deployment began.  ----

  [11: 11:06] the target platform's (Oracle Cloud).

  [11: 11:06] recovery of the existing application information

  [11: 11:09] analysis of the dependence running...

  [11: 11:09] building...

  [11: 11:12] deployment 2 profiles...

  [11: 11:12] wrote on the Web for C:\JDeveloper\mywork\TrainingDemo\ViewController\deploy\TrainingDemo_ViewController_webapp1.war application Module

  [11: 11:12] wrote the Module Enterprise Application to C:\JDeveloper\mywork\TrainingDemo\deploy\TrainingDemo_application1.ear

  [11: 11:12] Application deployment...

  [11: 12:10] Oracle Cloud Job ID: 58640

  [11: 12:13] Oracle Cloud deploy job log: C:\Users\14992\AppData\Local\Temp\cloud-1546182943221418855.log

  [11: 12:13] # incomplete deployment.  ####

  [11: 12:13] the Cloud Oracle job failed. Message from the server Oracle Cloud was:

  Failure of the work of the Oracle Cloud. Check the job log file.

  
  

  Cloud - 1546182943221418855.log

  [INFO] - == > injection EAR finished: *.

  TrainingDemo1_application1.ear_dir* *.

  2015-03-16 03:12:53 CDT: Cloud Application Compilation succeeded

  2015-03-16 03:12:53 CDT: "Cloud App compile" complete: status SUCCESS

  2015-03-16 03:12:53 CDT: start action "deploy the Application.

  2015-03-16 03:12:53 CDT: deploy Application started

  2015-03-16 03:12:53 CDT: no servers managed at the service request

  2015-03-16 03:12:53 CDT: deploy Application failed.

  2015-03-16 03:12:53 CDT: 'Deploy the Application' complete: FAILED status

  
  

  Check this blog hands-on experience on Oracle products: deployment of Applications in the cloud to Oracle using JDeveloper ADF which giudes for the adf in the cloud application deployment.

  Timo

• "JNDI name is already in use" error when deploying ADF Application after the deployment of Interface of AM Service

  Hello

  12.1.3 JDeveloper / WLS 12.1.3 / Windows 7 64-bit OS.

  I am facing the problem that is mentioned in the following post.

  https://community.Oracle.com/thread/2284290

  I created a simple ADF page with the data to display in the Employees table. The page works fine.

  I added a custom method to the AM and a profile of "Business Service Interface components" deployment of the AOS.

  When I'm trying to deploy the stand-alone WLS Service, it gives the error below.

  If I deploy only the AM Service interface, the web service deployment is going very well.

  If I cancel the deployment of the AM Service and deploy ADF EAR, then it also works very well.

  But if I deploy the AM Service and then try to deploy the EAR, then it gives the error below.

  And vice versa, if I deploy EAR application, and then deploy the AM service, it gives the error below.

  It was working fine until 11.1.1.7.

  I have done this repeatedly for a long time and wasn't any problem in 11.1.1.7 deployments.

  If something has changed in 12.1.3?

  Even if the AM Service is existing, it is deployed in the same application, it should be able to just crush?

  Here are the results with different versions

  11.1.1.7 - domain of the ADF - Standalone Server - works fine

  11.1.1.7 - SOA - Standalone Server - domain works very well

  12.1.3 - error field - integrated WLS - ADF

  12.1.3 - error field - independent server - SOA

  (The foregoing analysis is based on a simple project ADF as a point of Contact for that matter).

  Real-world scenario

  --------------------

  We need this because ours is a BPM Application and the Composite depends on the AM Service, so the AM service must first deployed in the field of the SOA.

  Then, we make the process as well as the ADF UI for task forms. ADF project depends also on the model project

  We get the error during the deployment of the BPM project and the ADF UI project below.

  Error

  -----

  Unable to deploy EJB: ModelEJB.jar model.common.HRAMServiceBean:

  [EJB:011055] The EJB deployment error ' model.common.HRAMServiceBean (Application: employees, EJBComponent: ModelEJB.jar) ", the JNDI name" HRAMServiceBean #model.common.serviceinterface.HRAMService "is already in use." You must assign another name JNDI in weblogic-ejb-jar deployment descriptor. XML or annotation corresponding to this EJB before it can be deployed.

  [12: 02:07] caused by: java.lang.Throwable: substituted for the missing class [EJB - 11055] the EJB deployment error ' model.common.HRAMServiceBean (Application: employees, EJBComponent: ModelEJB.jar)', the JNDI name "HRAMServiceBean #model.common.serviceinterface.HRAMService" is already in use. You must assign another name JNDI in weblogic-ejb-jar deployment descriptor. XML or annotation corresponding to this EJB before it can be deployed.

  Thanks for any help

  Sameer

  Found a workaround for this problem.

  I don't have to do this in 11.1.1.7 well!

  You don't know if it's the right solution or not!

  If anyone of you knows a better solution, please share.

  I did the 2 following things.

  a. classes of the AM Service Interface of removed files from deployment profile filters

  ViewController project-> properties-> deployment profile--> filegroups--> WEB - INF / classes-> filters

  : Uncheck * Service *. * files (4 - Service.class, Service.wsdl, Service.xsd, ServiceImpl.class)

  b. deleted the deployment profile of library jar ADF for the model project

  Model project-> properties-> deployment

  : Remove the deployment of ADF library jar files profile

  And now I am able to deploy time interface AM Service and application.

  It works for me because I won't need to deploy the AM Service interface again while deploying the process / code of the ADF.

  Since I will deploy the Service Interface of first Business components separately.

  Thanks and greetings

  Sameer

• Getting error while deploying ADF Mobile App in the android emulator

  Hi all
  I'm getting following error when the mobile deployment app in the android... emulator I went through google search and I did all the steps as follows...
  
  
  1 keytool - genkey - v - keystore debug.keystore - alias androiddebugkey - keyalg RSA - keysize 2048 - validity 10000
  
  I gave the password, last name, organization, State and country
  2 jarsigner - sigalg MD5withRSA - digestalg SHA1-verbose - keystore /Users/Admin/.android/debug.keystore C:\JDeveloper\mywork\GeneralMobileApp\deploy\ANDROID_MOBILE_NATIVE_archive1/generalmobileapp.apk
  3 / e - platform-tools/adb install - r C:\JDeveloper\mywork\GeneralMobileApp\deploy\ANDROID_MOBILE_NATIVE_archive1/generalmobileapp.apk
  
  After the above step... I got the SUCCESS message (while performing the steps above in the command prompt).
  
  Even after this... I get the same error while deploying my application using jdeveloper in the android emulator...
  
  
  ERROR:
  
  [09: 40:02] failure [INSTALL_FAILED_INSUFFICIENT_STORAGE]
  [09: 40:02]
  [09: 40:02] command-line execution failed (return code: 0)
  [09: 40:02] run command line: 'E:\android\adt-bundle-windows-x86_64\sdk\platform-tools\adb' EI setup - r "C:\JDeveloper\mywork\GeneralMobileApp\deploy\ANDROID_MOBILE_NATIVE_archive1\generalmobileapp.apk".
  [09: 40:02] undeployment.
  [09: 40:02] - incomplete deployment.
  [09: 40:02] deployment failed due to one or more errors returned by "E:\android\adt-bundle-windows-x86_64\sdk\platform-tools\adb". What follows is a summary of the returned error:
  Failure [INSTALL_FAILED_INSUFFICIENT_STORAGE]
  
  
  Kind regards
  Nani
  
  Published by: 962874 on January 12, 2013 06:46

  The emulator can run out of space for applications - so if you have other applications that are deployed to the emulator remove them and then try again.
  Other options here:
  http://StackOverflow.com/questions/2239330/how-to-increase-storage-for-Android-emulator-install-failed-insufficient-Stora

• "404" error when running ADF Applications using Weblogic / OAM / Webtier

  Hi Experts,
  
  Our organization works on the implementation of Weblogic 10.3.5 on HP - UX 11.31 / PA RISC hardware.
  
  All is well enough to work, but we met a particular hurdle and I hope I can get some advice from people here in the forums.
  
  We have virtual hosts within the Weblogic web layer for different areas. We also have Oracle Access Manager configured to protect some web resources (to force the user to authenticate to access the page). Each virtual host is configured to use the https protocol, and we have SSL certificates installed.
  
  The problem arises when trying to deploy an ADF application for weblogic, then run it through one of these virtual servers. We want these applications to use https only. Mod_wl_ohs has also been configured to forward requests to the web layer weblogic.
  
  App deploys fine, and when you try to access the app, we are redirected to a login page by OAM, which is what we want. However, when the application starts to run, it seems that ADF is adding to the URL query parameters, and when he does this, redirecting to https, which causes a 404 error. If you manually add the 's' on the URL, the application loads and works very well.
  
  For example:
  Say the url of our application is
  https://foo.mydomain.com/MyApp/faces/search
  Navigate to this url redirects to the login page. After the connection, we headed over to something like this (the actual settings vary):
  http://foo.mydomain.com/MyApp/faces/search?_afrLoop=7078069345015890 & _afrWindowMode = 0 & _adf. CTRL-State = yvpch8hdh_4
  .. which returns a 404 error.
  If put us the 's' on the url, it works as expected.
  
  Why is this happening? Why is redirect to the login page staying is not in https?
  
  To facilitate debugging, we created a very simple jsp page that was not developed using ADF, and deployed in a similar way, and he remained in https after redirection from the login page.
  
  Is this a specific problem ADF? Is something that needs to be configured in the ear file deployment of JDeveloper?
  
  Any advice would be much appreciated...
  
  Published by: corn on September 18, 2012 09:43

  Hello

  It seems that you use any porxy between the two.

  Please activate weblogicplugin activated under

  Server--> --> configuration--> advance.

  Enable this option and try to restart the server again.

  Kind regards
  Kal

• When to install the old version of quicktime get error: an operation cannot be performed because a file handle could not be opened

  "On windows vista, that I am trying to install quicktime for windows 2.1.2 so I can run a program requiring but keep getting messages like" an operation cannot be performed because a file handle could not be opened.  Try to close applications or increase the number of files available (see order of FILES in your manual BACK". Or I receive QTINSTAL caused a GPF in module QT16 failure. EXE to 0002:5DA9

  Hello chris_660,

  You can check that the program that you try to run Windows Vista compatible by visiting the link below:
  Windows Vista Compatibility Center
  
  Also, you can try to run the program in compatibility mode and then check if the same problem occurs.

  Make older programs in this version of Windows

  Thank you

• Some customers get Error when loading the application #2032

  Hello

  Some of my application users become "Error #2032" while accessing my application. Please help what could be the problem and how to solve it. I saw a few posts for this error and therefore placed a crossdomain in the Web server file, write - use-network = false in the flex compiler, give read/write access to the swf file.

  Always make the same mistake. Help, please.

  Concerning

  Rasmikant

  Hi, I have the same error. Maybe it occurs when flex trying to access an EPIRB and customer have no internet conexion (don't have lan).

  My solution is to compile flex app with code RSL merged, the problem is that incrise the size of the SWF. You can follow these steps:

  1. open the properties of the project

  2 click on Flex build path

  3. at the top, select 'Framework links'->: merger in the code.

  4. click ok and rebuild your app

  5º bin release in export.

  Kind regards

  Pablo Rey.

• When I start my computer, I get and Error Message (InfoCenter.exe - Application error)

  When I start my computer, I get and Error Message (InfoCenter.exe - Application error) that someone knows what this means and why I make it?

  Hello

  Follow these steps and check if that helps:

  Method 1:
  Start the computer in safe mode and check if the same error occurs:
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/boot_failsafe.mspx?mfr=true

  Method 2:
  I suggest you try to perform the clean boot and check if it helps:
  http://support.Microsoft.com/kb/310353

  NOTE: When you are finished troubleshooting, make sure that restore you the computer mode normal startup such as suggested in the article above.

  Check if that helps.

• Whenever the browser opens, I get an error saying: "Explorer.exe" application crash

  Original title: I get an error saying: "Explorer.exe" application crash

  Whenever it opens explorer, I get the error below and it remains my explore

  I get the error message is the following:

  Signature of the problem:
  Problem event name: APPCRASH
  Application name: explorer.exe
  Application version: 6.0.6002.18005
  Application timestamp: 49e01da5
  Fault Module name: StackHash_b61d
  Fault Module Version: 6.0.6002.18327
  Timestamp of Module error: 4cb73436
  Exception code: c0000374
  Exception offset: 000b06fc
  OS version: 6.0.6002.2.2.0.256.1
  Locale ID: 2057
  Additional information 1: b61d
  More information 2: 167a8c47623c2496d77676b17616bd5b
  3 more information: ae0a
  Additional information 4: 8785af56cd014fa3319b3e04d072db96

  Please let me know how I can solve this problem.

  Thank you

  Sam

  Hi Sam,

  Do you remember what makes any agreement, changes this question?

  Method 1: Run the fixit available in the links below and check if that makes a difference-Worth to try
  Difficulty of broken desktop shortcuts and common system maintenance tasks

  Note: FixIt would attempt to recover bad sectors on the hard disk, in the course of this process there are chances of DATA loss from that particular area.

  Method 2: If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 3:  Put the computer to boot and then check if the problem persists

  Follow step 1 in the link below,
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

   

  If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Continue with the remaining steps to pin-point on the third party service.

  After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.

• ADF Application Tuning to improve performance

  Hello

  I use Jdeveloper 11.1.1.9, and I built an ADF application with root application Module and 8 Modules application Sub (8 services),

  and many simultaneous users can use the system of and I want to get the best setting of the application of the ADF , but I can't determine the values and properties to change for best performance.

  Note that I read a lot of articles, and to be honest I don't understand.

  If there is an example please provides.

  Thank you very much.

  There is no one who can give you good values, because they depend on the application and how it is used.

  Reading Andrejus Baranovskis Blog: Stress test Oracle ADF BC application - Passivation and Activation

  and Andrejus Baranovskis Blog: ADF Performance Marathon - 22-hour Stress Test and discover the good values by the stress test your application.

  Timo

• Error during the deployment of ADF application on weblogic Server integrated in JDEV - [SPI: J2EE deployment 260010]

  Hello Experts,

  I received the following message when I tried to deploy a sample application on the weblogic Server integrated into my JDEV ADF.  Can someone help me with this error message?

  < 27 March 2015 21:30:09 CEST > < opinion > < WebLogicServer > < BEA-000360 > < server started operation >

  IntegratedWebLogicServer start time: 33630 ms.

  IntegratedWebLogicServer has begun.

  [Running the application on Server Instance IntegratedWebLogicServer SavedSearches...]

  [15:30:11]-deployment began.  ----

  [15:30:11] the target platform's (Weblogic 10.3).

  [15:30:18] # incomplete deployment.  ####

  [15:30:18] [SPI: J2EE deployment 260010] unable to connect to ' t3s: / / localhost:7102' as a user, "weblogic. Error returned: null

  [15:30:18] [SPI: J2EE deployment 260010] unable to connect to ' t3s: / / localhost:7102' as a user, "weblogic. Error returned: null

  [15:30:18] [SPI: J2EE deployment 260010] unable to connect to ' t3s: / / localhost:7102' as a user, "weblogic. Error returned: null

  [15:30:18] t3s: / / localhost:7102: Destination unreachable; nested exception is:

  java.net.ConnectException: Connection refused: connect. No router available at destination

  [15:30:18] Destination unreachable; nested exception is:

  java.net.ConnectException: Connection refused: connect. No router available at destination

  # Cannot run application SavedSearches due to the deployment on IntegratedWebLogicServer error.

  [SavedSearches application stopped and cancelled Server Instance IntegratedWebLogicServer]

  Thank you

  David Selvaraj

  Can user, you please tell us your exact Jdev version?

  The error message tells you that the server has been started, but is not available under the localhost:7102 of access

  The port doesn't look good for me. The built-in Server normally uses port 7101. You can check which port you configured for the server?

  You can check this on the "application server" tab and select the built-in server, right-click, and select Properties. In the dialog box, you see the configuration.

  Timo

• The ADF application deployment error

  Hi all

  We get another error in the SOA application

  Each time that attempted to deploy the ADF for the application (.) The EAR) in soa_server1, it gave me error archive invalid soa.

  Help, please.
  

  Hello

  Thanks for posting.

  The above error isony because we can deploy only archive SOA (.) SAR files) on SOA_server1 managed server.

  We can deploy only SOA archive (.) SAR files) on SOA_server1 managed server. We cannot deploy ADF (.) Applications of EAR) in SOA_server1 managed server. To deploy the ADF (.) Applications of EAR) we must deploy either Jdev Weblogic Console.

• error on service cloud oracle adf application deployment

  Hello, I hv saved cloud oracle java and database service. I hv created adf simple application in which there are 2 jsf pages only linked together. I m using oracle jdeveloper 11 g 2. so I hv created file ear for deployment in the cloud. I have deployed adf the cloud using the java console application. But after downloading applications, deployment failed. I tried 3 times, but the result was the same. I checked the logs, I got 3 warnings in the whitelist log and error in deploy newspaper. Those are the following:
  
  Warnings in the whitelist log:
  
  2013-04-14 06:57:11 CDT: start action "API Whitelist.
  2013-04-14 06:57:11 CDT: began API whitelist
  2013-04-14 06:57:12 CDT: WARNING - there are 3 warnings (s) found for Testapp.ear.
  2013-04-14 06:57:12 CDT: WARNING - Path:Testapp.ear (3 warnings)
  2013-04-14 06:57:12 CDT: WARNING - Path:Testapp.ear (3 warnings)
  2013-04-14 06:57:12 CDT: WARNING - Path:Test_ViewController_webapp.war (3 warnings)
  2013-04-14 06:57:12 CDT: WARNING - path: WEB - INF * (1 WARNING)
  2013-04-14 06:57:12 CDT: WARNING - 1: "login-config' missing under element child element has recommended.
  JavaEE:web - app.
  If you want to publish your application, you may have vacuum
  < login-config / > in your web.xml file. If you require authentication, you must then
  have <>login-config and its child < auth-method > element in the web.xml file.
  Without this element (< login-config >), users can be challenged by SSO, but
  the code of the application will be run as an anonymous user. Line no.: 4.
  2013-04-14 06:57:12 CDT: WARNING - path: WEB - INF * (2 warnings)
  2013-04-14 06:57:12 CDT: WARNING - 1: recommended "jsp-descriptor" missing under element child element.
  ORCL - weblogic:weblogic - web - app.
  
  If you have a JSP file that is not precompiled, compile errors
  could be shown on the browser. It is recommended to include
  verbose false > < jsp-descriptor > < < > < * *-descriptor > in weblogic.xml.
  Line no.: 2.
  2013-04-14 06:57:12 CDT: WARNING - 2: recommended child element "session-descriptor" missing under element.
  ORCL - weblogic:weblogic - web - app.
  
  You will be asked to have cookies separate way, if several
  applications are available in the same SSO session or if you
  multiple applications with different auth-method(CLIENT-CERT, FORM, BASIC)
  in the same service instance.
  Line no.: 2.
  2013-04-14 06:57:12 CDT: WARNING - Testapp.ear had 3 WARNING (s).
  
  2013-04-14 06:57:12 CDT: INFO - validate white list ended with 0 error (s) and WARNING (s) 3.
  2013-04-14 06:57:12 CDT: validation whitelist past.
  2013-04-14 06:57:12 CDT: complete "API Whitelist": status SUCCESS
  
  
  
  and error in deploy journal:
  
  2013-04-14 06:57:12 CDT: start action "deploy the Application.
  2013-04-14 06:57:12 CDT: deploy Application started
  2013-04-14 06:57:15 CDT: weblogic.application.ModuleException: could not load the webapp: Test-ViewController-context-root cause DeploymentException: java.lang.ClassNotFoundException: oracle.adf.view.faces.bi.webapp.MapProxyServlet
  2013-04-14 06:57:15 CDT: State action WL: failure
  2013-04-14 06:57:15 CDT: Action FAILED with State action WL: failure
  2013-04-14 06:57:15 CDT: see the server log of your cloud service Java for more information about the failure.
  2013-04-14 06:57:16 CDT: Application Deployment failed.
  2013-04-14 06:57:16 CDT: 'Deploy the Application' complete: FAILED status
  
  
  I use jdeveloper 11 GR 2, so pls don't tell me to use jdeveloper 11 GR 1 material. because, I hv already developed an application for my final year of Bachelor and I can't migrate to the previous version. So there is only one way for me to generate the ear file and the deployment of the console.
  
  Thus,.
  I m not getting what is the problem and what will be the solution for this?
  What should I do?
  What changes are required?
  
  Please, help me out of this problem!

  Well hosting Cloud Oracle ADF applications is for the ADF * 11.1.1-then you will not be able to deploy an application developed with * 11.1.2 thereon.
  If you don't want to revert to the version support for JDeveloper, I suggest that you look in the other accommodation options.
  For example: http://multikoop.blogspot.de/2012/09/adf-essentials-in-redhat-cloud.html

• Error ADF application to a stand-alone weblogic deployment

  JDeveloper version: 11.1.2.2
  
  Question: I have built a standalone weblogic server (10.3.5.0) and am trying to deploy my ADF application on it. The deployment fails with the following message is displayed. The stand alone server, I built is on the same machine where jdeveloper is installed and I use same weblogic provided with jdeveloper install. The application works well on the integrated server. I have studied this issue and you have more or less the same answer of ADF installation run libraries. Can anyone please help me with exactly what I install and how?
  
  Thank you
  Saurabh.
  
  
  [09: 49:44] cannot determine the platform target profile. Using default
  [09: 49:44]-deployment began. ----
  [09: 49:44] the target platform's (Weblogic 10.3).
  [09: 49:55] recovery of the existing application information
  [09: 49:55] analysis of the dependence running...
  [09: 49:55] building...
  [09: 50:18] deployment of profile...
  [09:50:20] wrote on the Web for C:\JDeveloper\mywork\EmployeeTrack\ViewController\deploy\EmployeeTrack_ViewController_webapp.war application Module
  [09:50:20] Application deployment...
  [09: 50:24] [Deployer: 149191] Operation "deploy" on demand "EmployeeTrack_ViewController_webapp" boot on 'ADFServer '.
  [09: 50:26] [Deployer: 149193] Operation "deploy" on demand "EmployeeTrack_ViewController_webapp" failed on "ADFServer".
  [09: 50:26] [Deployer: 149034] an exception has occurred for task [Deployer: 149026] deploy EmployeeTrack_ViewController_webapp on ADFServer. : could not load the webapp: "EmployeeTrack_ViewController_webapp.war."
  [09: 50:26] WebLogic Server Exception: weblogic.application.ModuleException: could not load the webapp: "EmployeeTrack_ViewController_webapp.war."
  [09: 50:26] caused by: weblogic.management.DeploymentException: error: unresolved Webapp library makes reference to ' [ServletContext@29261813[app:EmployeeTrack_ViewController_webapp module: EmployeeTrack_ViewController_webapp.war path: / alonedemo spec-version: 2.5] ", defined in weblogic.xml [Extension-name: adf.oracle.domain.webapp, exact match: false], [Extension name: jstl Specification-Version: 1.2, exact match: false], [Extension name: jsf Specification-Version: 2, exact match: false]
  [09: 50:26] check the server logs or the console of the server for more details.
  [09: 50:26] weblogic.application.ModuleException: failed to load the webapp: "EmployeeTrack_ViewController_webapp.war."
  [09: 50:26] undeployment.
  [09: 50:26] - incomplete deployment.
  [09: 50:26] remote deployment failed (oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer)

  In the colsole admin click on the name of one of the libraries, and then select the target tab and see if the checkbox for your (managed) server is set. If it's the library should be available, and you should not see the error.

  Timo