Get errors trying to build ASDOC for a library

Similar Questions

• After reformatting and installation, activation, I get a message that I don't have a valid copy of XP. Get errors from each Web site for certificate errors. Any ideas?

  Validation problem

  After reformatting and installation, activation, I get a message that I don't have a valid copy of XP.  Get errors from each Web site for certificate errors.  Any ideas?

  I think I found that the time and date on the pc was showing Jan of 2002.  Seems to be loading of updates now!  I hope that this will solve.

• Error trying to build the cRIO RT application

  Hi all

  I'm trying to build an executable to run my cRIO-9022 project on a computer without labview and receive the following error message when you try to build:

  "

  Error 1 has occurred to copy in AB_Engine_Copy_Error_Files.vi-> AB_RTEXE.lvclass:Copy_Error_Files.vi-> AB_Application.lvclass:Copy_Files.vi-> AB_Build.lvclass:Build.vi-> AB_Application.lvclass:Build.vi-> AB_RTEXE.lvclass:Build.vi-> AB_Build.lvclass:Build_from_Wizard.vi-> AB_UI_Frmwk_Build.lvclass:Build.vi-> AB_UI_FRAMEWORK.vi-> AB_Item_OnDoProperties.vi-> AB_Item_OnDoProperties.vi.ProxyCaller

  Possible reasons:

  LabVIEW: An input parameter is not valid. For example if the input is a path, the path can contain a character not allowed by the operating system such as? or @.
  =========================
  NOR-488: command requires GPIB controller charge controller. »

  I ran the program from a computer with labview for the cRIO and it works very well.  I've attached a screenshot of my main block diagram because he said it could be a bad path?  Any advice?  And it comes to labview 2011.

  Thank you

  If you're still having problems, you can ensure that you don't have spaces or special characters in one of your names in VI. And check all references to the paths absolute or relative to your subVIs.

  The Advanced tab of the Build executable window has a few options that you can try to change. You can uncheck 'Copy error code files' and check the 'use LabVIEW 8.x file layout' options. A final step would be to turn on debugging see if that clears the error message.

• Always get errors trying to download something on the creative cloud.

  I tried to download the trial version for Adobe first pro and im always getting error while trying to download it, I also tried to download the software directly and it works but when its time to install it, it also gives me an error, wich btw is not specified, I treid to redownload everything and it does not work. Im not a pro so if anyone of you guys already have this problem please help me. If you need more detail just ask and ill he provides for you.

  Thanks in advance.

  BTW im on windows 7

  Hey SimonG962805

  Please see this KB document for help errors ' Exit Code: 6 "," Exit Code: 7 "|"» CS5, CS5.5.

  Kind regards

  Nicos

• Error trying to build app

  Hello

  I am developing an app for blackberry and so downloaded the momentics ide with the blackberry 10 Simulator. However, when I create a new application (only the model of "hello world" single) and try to build, I get the following error: make [1]: * no rule to make target 'test1155.ts', was in need of "liberation".  Stop.

  The strange thing is that I never said that he should 'release' the build. Everything is installed to "debug". Can anyone help? I tried to reinstall.

  Thank you.

  Well my last updated me in the right direction, then after trying to fix things that have not been broken since 3 days I fixed it. I installed momentics in another folder (no weird characters there) and now he is in fact, click on and. I should have stuck with "developers file name ', but I had to be fancy thank you for the advice and tips guys

• Error trying to install drivers for scanner Motorola MC9190

  Okay, maybe my age plays tricks with my mind, but:

  A device when it is PLUGGED in, causes the NEW DEVICE DETECTED process start.  While trying to install the new device drivers - he gets an error message indicating that the unit is "UNPLUGGED"?  This means that a device can be PLUGGED IN and UNPLUGGED, at the same time?

  Hello

  Welcome to the Microsoft community. I will certainly help you with the problem you are experiencing.

  This problem can occur is when there is a connectivity problem or a driver problem. Try the following methods and check.

  Method 1: Run the peripheral hardware troubleshooter

  It checks the common issues of interest and ensures that a new device or hardware connected to your computer has been installed correctly.

  Open the hardware and devices Troubleshooter

  Method 2: Compatibility Mode

  Most programs written for Windows Vista also work in this version of Windows, but some older programs might run poorly or not at all. If a program written for an earlier version of Windows does not work, you can try changing the compatibility of the program settings, either manually or by using the program compatibility problems.

  Make older programs in this version of Windows

  Hope this information was useful. Let us know the results once you have tried these methods. We will be happy to help you further.

  Thank you

• 800705AA error trying to install patches for Microsoft Vista

  Hi I have a Vista computer that won't let me install the Microsoft updates

  XP1 SP1
  WUpdate
  etc.

  Whenever I get just the 800705aa error message

  Some internet research suggest it is perhaps a matter of resources, but the machine is moderate with lots of disk space. 750 MB of Ram and a set at 2 GB swap file.

  Any thoughts would be appreciated.

  Hi drivenbysteam,

  Thank you for using answers Forum.

  In your post, I see that you have identified your Vista operating system.
  Your do not need XP service pack.

  Is this a new computer?
  Have you recently updated any material?
  How much hard disk space you have available?
  What version of Vista you have?
  How much video memory do you have?

  A little more information should help us narrow down where to look.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Always get errors trying to control power 7651 YOKOGAWA on Labwindows/CVI

  Hello

  I'm trying to set the voltage on YOKOGAWA 7651 feeding through labwindows/cvi. I've set up a digital slide on my UI with callback function "yoko7651dcvolts" and the name of the constant "YOKO7651DCVOLTS".

  I always get this error when I run my program:

  "FATAL RUN-TIME ERROR: "DcSource.c", line 53, col 65, thread id 0x00001F3C:   Invalid argument type: found 'pointer to double', expected 'pointer to int'."
  

  This error indicates the third argument to the GetCtrlVal function below. The lack of program/compiler pass the variable "yoko1volts" as a whole, but I want to (and should) be able to settle the tensions as floating numbers.

  Of more, even when I said "yoko1volts" as a whole, it stills does not work. All I get is zero, zero and zero... on the power meter whenever I press the digital slide.

  This is the section of the C code which is problemic:

  int CVICALLBACK yoko7651dcvolts (int panel, int control, int event,        void *callbackData, int eventData1, int eventData2){    double yoko1volts;    switch (event)    {        case EVENT_COMMIT:        GetCtrlVal (yoko76511Panel, YOKO7651_1_YOKO7651DCVOLTS, &yoko1volts); // to read the values entered on the numerical meter on the user interface
  
          yk7651_set_volts (yoko76511Panel, yoko1volts); // set the entered values as voltage on the instrument
  
          break;    }    return 0;}
  

  It's the h-file related:

  #define  YOKO7651_1                       4#define  YOKO7651_1_YOKO7651SWITCH        2       /* control type: binary, callback function: yoko7651switch */#define  YOKO7651_1_YOKO7651DCVOLTS       3       /* control type: scale, callback function: yoko7651dcvolts */
  
  
  

  Please help, how can I solve this problem?

  All pilots (including feeding YOKOGAWA 7651) are correctly installed and mounted. In fact, I can successfully turn the power supply on and off with the code below:

  int CVICALLBACK yoko7651switch (int panel, int control, int event,        void *callbackData, int eventData1, int eventData2){    int yoko7651switchstate;    switch (event)    {        case EVENT_COMMIT:        GetCtrlVal (yoko76511Panel, YOKO7651_1_YOKO7651SWITCH, &yoko7651switchstate);        SetCtrlVal (yoko76511Panel, YOKO7651_1_YOKO7651SWITCH, !yoko7651switchstate);        yk7651_output (yoko76511Panel, !yoko7651switchstate);            break;    }    return 0;}
  
  
  

  It is just setting the voltage on the power supply which is very problematic. Any help is appreciated... Thank you.

  I second opinion Al of a disconnection between the UIR and the variable that contains the handle to the Panel.

  As a side note, I noticed that the problematic line reads the value of the controll which callback is executed:

  #define  YOKO7651_1_YOKO7651DCVOLTS       3       /* control type: scale, callback function: yoko7651dcvolts */
  
  int CVICALLBACK yoko7651dcvolts (int panel, int control, int event,        void *callbackData, int eventData1, int eventData2){    double yoko1volts;    switch (event)    {        case EVENT_COMMIT:        GetCtrlVal (yoko76511Panel, YOKO7651_1_YOKO7651DCVOLTS, &yoko1volts); // to read the values entered on the numerical meter on the user interface
  
          yk7651_set_volts (yoko76511Panel, yoko1volts); // set the entered values as voltage on the instrument
  
          break;    }    return 0;}
  
  

  In a situation like this, I will try using GetCtrlVal (Panel, control, & yoko1volts); Instead, which should get rid of all the problems in the control panel manage / control ID.

  Despite this solution works, anyway I'd be deep into the problem like a bad Panel can lead to erratical behaviors in other parts of the program.

• trying to update CC but get error trying to connect to the server and never connects

  My CC table trying to update and is stuck trying to connect to the server. No option to stop the update. Only option is to cancel. Then I can leave or install now, stuck keeps trying to connect to the server. This lasts for several days now?

  Once again, Sign in, activation or connection errors. CS5.5 and later, Acrobat DC

  If that fails, uninstall all cc, clean by use the CC cleaning tool to resolve installation problems. CC, CS3 - CS6 and reinstall, apps download Adobe Creative Cloud | CC free trial Adobe

• Make error trying to 'Examining data' for some physical tables in SPR

  Hi all:

  I'm having a problem when you try to use "Show data" option for some physical tables RPD.  Note, when I use "the number of rows updated" is not question and the number of rows is updated correctly.   As I mentioned, the issue happening with little and NOT all tables in physics.

  Error I get is:

  "State SQL NQODBC: HY000 nQSError: 10058 a general error has occurred."  [nQSerror:43113] The message returned by OBIS.  [nqserror:43119] "Query failed: [nQSerror:43093] an error occurred during the processing of the statement Execute physical."

  Appreciate any comment about it.

  Thank you

  Delete the tables on what all you get and import each one separately, it will work.

  Check if helps,

  Thank you

• get error in the build file"OSM. AIAInstallation.xml'

  Hello
  
  I am first time creation OSM for the solution in order to activate it.
  
  According to the documents I'm following steps to set up the studio of design and installation of the cartridges of AIA.
  I'm using design studion 3.1.4, OSM 7.0.3, Weblogic10.0.1
  
  When I run the task ant "allSimpleTopologyProjects" (which does not appear in "OSM. AIAInstallation.xml "(fichier de génération) its throwing below error."
  
  BuildFile: U:\OracleCgbuOsmAIAInstallation\OSM. AIAInstallation.xml
  allTypicalTopologyProjects:
  setupStaging:
  [echo] Definition of AIA PIP Staging Directory in T:\bea\OSM7.0.3\SDK/Automation/automationdeploy_bin/... /... \OSM. PIP\staging
  [unzip] Expansion: T:\bea\OSM7.0.3\SDK\OSM. PIP\OracleCgbuOsmAIAPIPCartridges.zip in T:\bea\OSM7.0.3\SDK\OSM. PIP\staging
  importOsmAIAPIPProjects:
  [echo] Import projects AIA...
  [echo] Project import: CommunicationsProvisioningOrderFulfillmentPIP
  
  BUILD FAILED
  U:\OracleCgbuOsmAIAInstallation\OSM. AIAInstallation.xml:113: The following error occurred during the execution of this line:
  U:\OracleCgbuOsmAIAInstallation\OSM. AIAInstallation.xml:123: Problem: could not create task or type studio.importProject
  Cause: The name is not defined.
  Action: Check the spelling.
  Action: Check that all custom tasks/types have been declared.
  Action: Check that any < presetdef > / < macrodef > statements took place.
  
  In which Jar task "studio.importProject" available?
  Or any configuration is missing?
  
  Kind regards
  UJ

  You must set the option run in the same JRE as the workspace. It seems that you run import with the parameter 'use JRE' separate You must follow the steps described in the guide of cartridge O2A to import of projects. Note that a manual import of projects will not give you the same result as import using the provided ANT script.

  See you soon
  ~ nagu.

• Error: "TV constantly will search for a library" cannot connect TV with DLNA.

  Original title: problems with DLNA.

  I have a home network (DG834PN) which I had for quite a few years and it works very well.

  The network has a laptop running XP, a desktop running Vista and an another desktop running Windows 7.

  I have broadband with Orange.

  Recently I bought a new TV, a Philips 46PFL5007 and I am unable to persuade the DLNA to work.

  The TV is connected to my network and shows on the network card.

  I have the latest version of Windows Media Center, which recognizes TV as a link to listen to the music and video.

  All my computers are connected to a workgroup.

  When I look at the TV network, it simply says "TV will constantly seek a media library.

  I looked through the network manager, and it seems nothing wrong, although I do not completely understand.

  There is obviously something that escapes me. Can you suggest it might be please?

  Thanks in advance for your help.

  concerning

  Hi WallaceRoberts,

  You can follow this link & check if the problem persists:

  
  Note: software use of third parties, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Media streaming with Windows 7

  Using play to with a DLNA Certified TV

  You can also contact Philips support for assistance:

  http://www.supportforum.Philips.com/en/forumdisplay.php?51-TV-Forum

  Hope the helps of information.

• Using a GUI API I got on the blackberry site - error: "tried of BlackBerry to access the api secure."

  Hello
  This is so the API, I downloaded and imported into my project->
  http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800332/800505/800608/...

  When I run it, I get "Error trying to access the api Module secure"

  It says its taken in charge for OS 4.2 and I think, so execute me on my blackberry 9900 OS 5 should work,
  I've been on these forums before and after the solutions, I ordered the signature of the key codes and signed the project as well.

  This is what appears in the signature box, just code until I run it:

  

  It compiles without error, but it still does not work.
  What I'm doing wrong exactly? Any help would be appreciated!
  Khalique - Amina

  Hey everybody,
  Anyone else who has this problem with these particular CBC of the advanced downloadable user interface files.
  Make sure the following is in place.

  Your JRE version is important.
  If you test on a device that is older than 7.1

  Change your JRE in a right click on the JRE and selecting the right JRE for your device. [some of you may need to download the right JRE].
  I installed the plugin for eclipse blackberry, so he automatically gave me all the available JRE. I just had to change.
  After that I changed it, I have not the reddest comments when I signed the code.
  AND
  It worked fine, no error message popping up for ' api access blocked attempts to.
  If anyone has questions and is the same problem. Please ask. I've spent hours on it, and I'd be happy to help you if I've been unclear!
  Take care!

• Why I see Runtime Error R6016-not enough space for thread data?

  All of a sudden when I try to launch Google Chrome, I get "error R6016-not enough space for thread data? ' like Chrome stops. Plenty of hard disk, disk defragmented, no viruses or malware. Never seen this message before.

  I think you're on the right track to reinstall Chrome... but they have a method of choice for the best results and that the information is here:

  http://support.Google.com/chrome/bin/answer.py?hl=en&answer=111899

  Just FYI, running sfc/scannow won't help, but it will waste your time and you will not be able to determine which file is causing the problem because...

  When sfc/scannow runs successfully, you will see a start and complete message in the Event Viewer log system.

  It can take a long time to run and slow down your system.  When it starts and stops correctly you can only see events like this in the case where the system log viewer:

  Event type: Information
  Event source: Windows File Protection
  Event category: no
  Event ID: 64016
  Analysis of file File Protection Windows has been started.

  Event type: Information
  Event source: Windows File Protection
  Event category: no
  Event ID: 64017
  Windows File Protection file analysis completed successfully.

  There is no information about what he did or what he did not.

  Even if sfc/scannow finds something to do, you will not know about it.

  That's why try again more than a waste of time.

• Lost my discs to fix computer - I keep getting errors in SQL Editor after updating everything, the patches do not work

  I've already updated and download the patches to remove HP with Windows XP, I always get error messages about SQL writer indicating the library has been corrupted and reinsert it doesn't tell me which library or where it is located and all microsoft help doctor's visits did not solve the problem nor has take it to a computer fix place0 which was a waste of $100,00 ~!

  Discs that I got for my computer does not appear in the shot and I have no way to fix my computer that I use for home based work.

  Could someone finally help me before I throw this computer out the window? It was more expensive that it was supposed to for be to work online - incidentally does not have Norton antivirus to prevent viruses!

  Hi Jen98051,

  1. when exactly you get the error message?
  2. What is the exact error message?

  We recommend that you restore the computer and check if the problem persists.
  see How to restore Windows XP to a previous state .
  b. Once you restore the computer to an earlier time, restart the computer and check the difference.

  If nothing works, then please provide us with more details on the issue, so that we can help you further.

  Visit our Microsoft answers feedback Forum and let us know what you think.