Get I/O device 0x08078002A error code when you try to backup in Windows 7.

Similar Questions

• I get the 0x8004230F error code when you try to backup in Windows 7.

  Original title: code 0x8004230F

  Backup do not work! I got the 0x8004230F code. What do I need to do?

  Hello

  1. don't you make changes on the computer before the show?

  2 have you installed third-party backup utility?

  3. what kind of backup do you run?

  4. you receive an error message with the error code?

  Follow the mentioned methods:

  Method 1: Check if these two services are running:

  A. Volume Shadow Copy service

  B. backup Windows

  Also to ensure that their dependency services are running. You can check this information from services.msc. Follow the steps below to check the services.

  (a) go to start and type services.msc in the search box.

  (b) search for both services.

  (c) make a right click on the service, one at a time.

  (d) select Properties.

  (e) go to start type.

  (f) select Auto

   

  Method 2:

   

  Run the disk check to find and fix errors on the disc.

  (a) click Start, type cmd, right-click cmd, and then click Run as administrator.

  (b) at the prompt, type chkdsk /f /r and press to enter.

  (c) try to save and check the result.

  For more information on 'Check a drive for errors' please visit this link:

  http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors

  Note: For security, try to manually back up data before a disk check. Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost

  Method 3:

   

  Step 1:

   

  You can also temporarily disable the security software and check if the problem persists. Be sure to enable this security software on the computer after checking.

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  If disabling the security software solves the problem, then contact the manufacturer of the specific security software to fix the problem.

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

   

   

  Step 2:

   

  Also try to set up your computer in a clean boot state, and check to see if the same problem happens.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, followstep 7 in the link provided to return the computer to a Normal startup mode.

  For more information on the "backup of your files' visit this link:

  http://Windows.Microsoft.com/en-us/Windows7/back-up-your-files

  I hope that helps!

• 80070652 error code when you try to upgrade to windows 10 Windows 7.

  * Original title: windows update error code

  80070652 error code when you try to upgrade to windows 10 Windows 7

  0 x 80070652

  ERROR_INSTALL_ALREADY_RUNNING ErrorClientUpdateInProgress

  If the upgrade process sticks or does not respond to 99%, it is better to wait and do nothing for 5 to 6 hours. If there is still no progress to close the Wizard Windows 10 upgrade, restart the computer and try to upgrade following the tips detailed below.

  You are using an ethernet cable or wireless to connect your computer to the router? Wired ethernet is faster and more reliable for large downloads. An ethernet cable is a low-cost purchase.

  Connect to a power supply, if your computer is a portable computer.

  Disable your anti-virus software so that the upgrade.

  I suggest you to download the tool for creating Windows Media 10 ISO and make a place in upgrade.

  Download the update of Windows Media Player 10 tool creation build 10586:
  http://www.Microsoft.com/en-us/software-download/Windows10

  How to download an ISO using media tool:
  http://www.tenforums.com/tutorials/9230-Windows-10-ISO-download.html

  How to make a upgrade in Place using method 1:
  http://www.tenforums.com/tutorials/16397-repair-install-Windows-10-place-upgrade.html#step6

  If this does not work please provide more information for your issue to be diagnosed.

  Restart your computer and wait 20 minutes for the system to operate before you download information. When the review much, not Event Viewer log files all problems show in the period immediately after the computer has booted.

  Please provide a copy of your system information file. Type the system information in the search box above the Start button and press the ENTER key (alternative is select Start, all programs, accessories, System Tools, system information). Select file, Export and give the file a name noting where it is located. Not to place the cursor in the body of the report before exporting the file. The system creates a new information file system each time system information is available. You must allow a minute or two before the file is completely filled before exporting a copy. Please download the file to your OneDrive, to share with everyone and post a link here. If the report is in one language other than English, please indicate the language.

  Please download and share with everyone a new copy of your log System of your event viewer on your disc one and post a link here. It allows to avoid confusion if you delete all previous copies of the log files of your OneDrive.

  To access the system, log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window, expand Windows logs and select System. Place the cursor on the system, select the Action in the Menu and record all events like (the evtx default file type) and give a name to the file. Do not offer not filtered files. Do not place the cursor in the list of reports before selecting the Action from the menu. Do not clear the logs so that you have a persistent problem.

  For assistance OneDrive see paragraph 9.3:

  http://www.gerryscomputertips.co.UK/MicrosoftCommunity1.htm

• Unable to get Windows Mail to send or receive. Get this message error code when you try to send: account: "Windows Mail".

  original title: Windows Mail

  Unable to get windows mail to send or receive.  Get this message error code when you try to send:

  Account: 'Windows Mail', server: 'pop.emailsrvr.com', Protocol: POP3, server response: '.', Port: 110, secure (SSL): no, error number: 0x800CCC18
  0x800cc0E error code received when you configure the ACCT.     POP3 and SMTP servers are: pop3.email.msn.com.  SMTP.email.msn.com.
  To find these server addresses, took some time to locate.  After locating and entering, using authentication
  sign username and password, he kept sign asking repeatedly.
  Any help on these questions would be appreciated.

  POP3 and SMTP servers are: pop3.email.msn.com.  SMTP.email.msn.com.

  To find these server addresses, took some time to locate.

  POP3/SMTP settings for an MSN e-mail account are on this page. That's more than three years, Hotmail includes the MSN e-mail accounts.

  Hotmail has its own support at the Windows Live Solution Centerforums. Please address any other question you may have on one of the forums on the right side of this page.

  Noel

• 0x800703E7 error code when you try to upgrade to Windows XP Service pack 3

  where updates seeks to install XP Service pack 3 error code 0x800703E7 takes place and will find load Service pack 3

  It's a blue screen or it appears in the window?

  What antivirus do you use?

  Is what kind of computer?

  you installed service packs earlier?

• 0x800706ba error code when you try to download from windows 8 shop online

  I am unable to use the app store with my new Yoga Lenovo's Windows.  Whenever I try to add an application, I see the above error code.  I tried several times for different applications.  It's very disappointing.  What should I do to be able to use the app store of Windows?

  Hey Leona,

  (1) this happens to all applications you are trying to download from Windows stores?

  (2) remember to make changes before this problem?

  Let us try the methods below and check if it helps.

  Method 1: Let us try to reset the cache to store Windows and check if it helps.

  (a) press the Windows key + R.

  (b) type wsreset.exe and press ENTER.

  I suggest refer you to the article given below to the convenience store to run applications.

  Method 2: Run the apps UI modern convenience store.

  What to do if you have problems with a soft

  http://Windows.Microsoft.com/en-in/Windows-8/what-troubleshoot-problems-app

  Let us also check whether the Proxy is enabled, let us try to turn it off.

  Method 3: Disable the Proxy Server.

  (a) press the Windows key + R, type inetcpl.cpl and press to enter.

  (b) click on the Connections tab, then click LAN settings.

  (c) uncheck the box use a proxy server for your LAN check box.

  (d) click Ok.

  Also make sure that the date and time is correct on the computer.

  Method 4: Set the date and time.

  Follow the steps to set the date and time:

  (a) press the Windows key + W on your keyboard to show the charms.

  (b) type Date and time in the search for charms bar.

  (c) click the date and time of change.

  (d) click apply and then Ok to save the date and time.

  Hope that the information has been useful, if you have any other questions, do not hesitate to answer. We are here to help you.

• 0 x 80070035 and 0X80004005 error codes when you try to connect to other computers and devices on the same network - unable to connect to the shared devices.

  I have a network consisting of Windows 7 laptop computers, an XP laptop and a Wireless Linksys (Cisco) WRT610 N + N with storage attached to it via its USB port.  Your PC Windows 7 has, since I can see and access to other computers and devices on storage.  Since Windows 7 PC B I can not connect (via the file manager) to A PC or NAS storage network.  Get such as 0 x 80070035 and 0X80004005 error codes when you try to connect to the IP address on the device name.  When I ping the devices of PC B I have no trouble to achieve.

  I turned off all firewalls, added the LMHOST file entries and a myriad of other tests and still cannot connect to PC B devices.  I can surf the net fine and do everything else - simply cannot connect to other devices even if these other devices can connect to me.

  I was in there for 22 years and has worked as an engineer on major networks and the network I stem - anyone got any idead. I checked all the basics such as Netbios, file sharing etc etc.

  It took a reinstall (upgrade) to get actually it works again.

• get 80071AA7 error code when you try to install windows vista sp1

  get 80071AA7 error code when you try to install windows vista sp1

  80071AA7 ERROR_FILE_IDENTITY_NOT_PERSISTENT
  The file could not be opened from a transactional point of view, because its identity depends on the result of a unresolved transaction.

  (1) If you have the Vista installation DVD making an 'upgrade on the spot"(aka repair facility)
  How to perform a repair for Vista Installation

  All personal data will be kept. All updates applied previously will need to be reinstalled.

  (2) do a clean reinstall of Vista. All the personal data will NOT be preserved.

  3) click this link to launch a request for assistance from Microsoft by Chat or email: Windows Vista Service Pack 1

• I keep on getting error 0x6D9 and 0 x 80070424 code when you try to activate my windows firewall, also my mcafee firewall does not work.

  I keep on getting error 0x6D9 and 0 x 80070424 code when you try to activate my windows firewall, also my mcafee firewall does not work. I have Windows 7 and it started only caused since last week. Can someone give me an idea on how to solve this problem?

  When you have McAfee running, he provided the Firewall & automatically deleted the Windows Firewall.   Panel\Windows Firewall control page should have shown a message say.  If you managed to change the settings for the Windows Firewall then you might have corrupted both the McAfee & Windows Firewall.

  I really think you should try a restore for some time point before you tried modifications, if that is even possible.

  If you have uninstalled McAfee Control Panel, programs, then you must also run the Tool McAfee Consumer Product Removal or you will get several unpredictable problems.

  If you still have problems after running the McAfee tool then it could be the result of the previous Windows Firewall changes & the corruption of the system resulting.  Your system is in an unknown state as a result of these changes.

  You can try running SFC/scannow in an admin command prompt, but it wouldn't do any good.

  You may need to use the installation DVD to do a repair installation.  I hope get you lucky, but you may need to do a complete reinstall of Windows.

• Get the 8024401c error code when you try to update.

  Get the 8024401c error code when you try to update. Tried various fixes - neither works. The message also says that I have installed no update, i.e. no history of update that is false. Any ideas.

  Concerning
   
  Original title: run Windows 8

  Solved the problem. Changed the configuration of updates of ' install updates automatically (recommended) to "check and download (do not install). Updates are now being downloaded and my choice to install.

  Thanks for your help, Jose Antonio, I learned how to scan my computer now!
  Regards Gary

• (Windows Vista Home Premium) 800b0100 error code when you try to install the two (KB978338) and (KB968389)

  (Windows Vista Home Premium) 800b0100 error code when you try to install the two (KB978338) and (KB968389)

  I tried all the recommended solutions that Windows can throw at me, and yet I still can't download these updates for some reason any. Whenever I run the program "Microsoft Fixit" he says it's a mistake and fixing it with success, but I still get the same error when you try to install the updates. I have checked for malware, scanning my computer everything and see nothing.

  Hello

  1. what troubleshooting steps are carried out to solve the problem?

  2 were there any hardware or software changes made on the computer before this problem?

  Method 1:

  I suggest you to return the item and check if it helps:

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Method 2:

  Check out the link and check if it works:

  Windows Update error 800b0100

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-800B0100

  Method 3:

  I suggest to put the computer in a clean boot state and then try to open the program and check if it helps.

  Note When you perform a clean boot, you may temporarily lose some functionality. When you start the computer as usual, the function returns. However, you may receive the error message, or you can experience the original behavior.

  How to solve the problem by running the clean boot in Windows Vista:
  http://support.Microsoft.com/kb/929135

  Note: Once you have completed troubleshooting, perform the steps in the step 7: to reset the computer as usual.

   

  Reference:

  You can download updates manually from the link below:

  http://www.Microsoft.com/downloads/en/default.aspx

  It will be useful.

• 80070490 error code when you try to install kb967723, kb970430, kb972145 I Norton is turned off, the firewall is disabled

  80070490 error code when you try to install kb967723, kb970430, kb972145 I Norton is turned off, firewall is disabled, I tried an update installation but only have a update disc and it turns this function when I try to reinstall vista full... I don't know what to do know... any ideas?

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• 64 c the error code when you try to install windows update kb2505591

  Why do I 64 c error code when you try to install windows update kb2505591

  Hello

  The kb2505591 is for the download of Bing Bar 7.0.

  You can try the methods provided below to solve the problem and then try to download the update for Windows.

  Method 1:

  I suggest to reset the Windows Update components and check if that helps resolve the issue.

  http://support.Microsoft.com/kb/971058

   

  Method 2:

  Follow the instructions in the link below to rename software c:\windows\system32\catroot and distribution records and try to install the service pack.

  You cannot install some programs or updates

  http://support.Microsoft.com/kb/822798

  If the methods above do not help then try to download Big bar 7.0 maually starting from the link provided below and check if the problem persists.

  http://support.Microsoft.com/kb/2505591

• Receive an A12E1 error Code when you try to update Photoshop CC.  Running an iMac with 10.7.5.  My OS drive is formatted as Mac OS extended (journaled).  Any suggestions?

  Receive an A12E1 error Code when you try to update Photoshop CC.  Running an iMac with 10.7.5.  My OS drive is formatted as Mac OS extended (journaled).  Any suggestions?

  As I said, I'm Windows as well as a few links saved, I have ZERO idea what to do with a Mac

  Link for download & install and installation & activation problems can help

  -Cat http://www.adobe.com/support/download-install/supportinfo/

• 800b0100 error code when you try to install Windows updates KB974145 and KB978251

  Greetings and salutations:

  Any help would be appreciated.

  I tried to install these 'important' updates several times with the same result - updates failed, error 800b0100 code. I downloaded and installed the KB974821 tool - tells me it installed - same problem. (I don't know if I'm supposed to do something else with KB974821 - I have to "run" or just "installed" it enough?) Instructions could certainly be clearer)

  I tried to download and install the updates manually - without success - I get various error messages, like "does not apply to your system" or "for a different hardware platform.

  I tried this with my firewall/antivirus close as well - using Trend Micro - and still no luck.

  Thoughts, comments, suggestions, help? Very much appreciated. Thank you.

  
  

  BTW, I'm running VHP 64 with Service Pack 2 installed. Nothing should be this complicated or frustrating.

  Additional information:

  In another forum, where I posted this inquiry (I was told is the right place to post it here) I was advised on how to get the results of the KB947821 tool that I ran.  (Why this information was not given instructions on how to use the tool is beyond me). Here are the results of the analysis, apparently:

  Checking Windows Service Packages

  Checking of manifests package and catalogs

  Checking package Watchlist

  Watchlist checking
  (f) amd64_bthmtpenum.inf_31bf3856ad364e35_0.0.0.0_none_7ff053f99479855b CBS Watchlist component missing 0 x 80070002 Microsoft-Windows-WPD7IP-SKU-package ~ 31bf3856ad364e35 ~ amd64 ~ ~ 7.0.6002.18112.bthmtpenum presence of registry package failed, possibly an orphaned package on package watchlist
  (f) amd64_wpdfs.inf_31bf3856ad364e35_0.0.0.0_none_a5e566b2d3236f6d CBS Watchlist component missing 0 x 80070002 Microsoft-Windows-WPD7IP-SKU-package ~ 31bf3856ad364e35 ~ amd64 ~ ~ 7.0.6002.18112.wpdfs presence of registry package failed, possibly an orphaned package on package watchlist
  (f) amd64_wpdmtp.inf_31bf3856ad364e35_0.0.0.0_none_9f92d6d487384aad CBS Watchlist component missing 0 x 80070002 Microsoft-Windows-WPD7IP-SKU-package ~ 31bf3856ad364e35 ~ amd64 ~ ~ 7.0.6002.18112.wpdmtp presence of registry package failed, possibly an orphaned package on package watchlist
  (f) amd64_wpdmtphw.inf_31bf3856ad364e35_0.0.0.0_none_78371ba92ff2a242 CBS Watchlist component missing 0 x 80070002 Microsoft-Windows-WPD7IP-SKU-package ~ 31bf3856ad364e35 ~ amd64 ~ ~ 7.0.6002.18112.wpdmtphw presence of registry package failed, possibly an orphaned package on package watchlist

  Checking packages

  Control components store

  Summary:
  Seconds executed: 1695
  Found 4 errors
  CBS Watchlist component lack Total count: 4
  Customer experience report downloaded successfully.  Thank you for your participation.  For more information, see the Microsoft Customer Experience Improvement Program on the Microsoft web site.

  So apparently the errors were detected. What they mean and how to fix them? Thank you!

  Hello

  How to fix Windows Vista error 800b0100 update
  http://www.SimpleHelp.NET/2008/07/06/how-to-resolve-Windows-Vista-update-error-800b0100/

  Error Code 800b0100 in Windows Update
  http://www.instantvista.com/800B0100.html

  Error message when you try to use Microsoft Update or Windows Update Web sites to install
  updates: "0x800B0100.
  http://support.Microsoft.com/kb/956702
  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system for Windows Vista, Windows Server 2008, update tool and
  for Windows 7
  http://support.Microsoft.com/kb/947821

  ------------------------------------------------------------

  If necessary, you can get free reports of incidents.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.