I get the 0x8004230F error code when you try to backup in Windows 7.
Original title: code 0x8004230F
Backup do not work! I got the 0x8004230F code. What do I need to do?
Hello
1. don't you make changes on the computer before the show?
2 have you installed third-party backup utility?
3. what kind of backup do you run?
4. you receive an error message with the error code?
Follow the mentioned methods:
Method 1: Check if these two services are running:
A. Volume Shadow Copy service
B. backup Windows
Also to ensure that their dependency services are running. You can check this information from services.msc. Follow the steps below to check the services.
(a) go to start and type services.msc in the search box.
(b) search for both services.
(c) make a right click on the service, one at a time.
(d) select Properties.
(e) go to start type.
(f) select Auto
Method 2:
Run the disk check to find and fix errors on the disc.
(a) click Start, type cmd, right-click cmd, and then click Run as administrator.
(b) at the prompt, type chkdsk /f /r and press to enter.
(c) try to save and check the result.
For more information on 'Check a drive for errors' please visit this link:
http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors
Note: For security, try to manually back up data before a disk check. Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost
Method 3:
Step 1:
You can also temporarily disable the security software and check if the problem persists. Be sure to enable this security software on the computer after checking.
http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off
http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
If disabling the security software solves the problem, then contact the manufacturer of the specific security software to fix the problem.
Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
Step 2:
Also try to set up your computer in a clean boot state, and check to see if the same problem happens.
By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.
How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
http://support.Microsoft.com/kb/929135
Note: After the boot minimum troubleshooting step, followstep 7 in the link provided to return the computer to a Normal startup mode.
For more information on the "backup of your files' visit this link:
http://Windows.Microsoft.com/en-us/Windows7/back-up-your-files
I hope that helps!
Tags: Windows
Similar Questions
-
Get the 8024401c error code when you try to update.
Get the 8024401c error code when you try to update. Tried various fixes - neither works. The message also says that I have installed no update, i.e. no history of update that is false. Any ideas.
ConcerningOriginal title: run Windows 8Solved the problem. Changed the configuration of updates of ' install updates automatically (recommended) to "check and download (do not install). Updates are now being downloaded and my choice to install.
Thanks for your help, Jose Antonio, I learned how to scan my computer now!Regards Gary -
original title: Windows Mail
Unable to get windows mail to send or receive. Get this message error code when you try to send:
Account: 'Windows Mail', server: 'pop.emailsrvr.com', Protocol: POP3, server response: '.', Port: 110, secure (SSL): no, error number: 0x800CCC180x800cc0E error code received when you configure the ACCT. POP3 and SMTP servers are: pop3.email.msn.com. SMTP.email.msn.com.To find these server addresses, took some time to locate. After locating and entering, using authenticationsign username and password, he kept sign asking repeatedly.Any help on these questions would be appreciated.POP3 and SMTP servers are: pop3.email.msn.com. SMTP.email.msn.com.To find these server addresses, took some time to locate.POP3/SMTP settings for an MSN e-mail account are on this page. That's more than three years, Hotmail includes the MSN e-mail accounts.
Hotmail has its own support at the Windows Live Solution Centerforums. Please address any other question you may have on one of the forums on the right side of this page.
Noel
-
get the 490 error code when you try to install the update net framework
0000490
Hi harry_m,
You are able to install some other updates of Windows on the computer?
Please provide compete the error message you receive and also specify Windows Edition\Version you are running on the computer, for a better understanding of the issue.
I suggest you try the following steps:
Step 1: Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833
Step 2: Run (Checksur.exe) system update readiness tool
Follow the steps mentioned in the link (method 1) below, and then try again to install updates
You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates
http://support.Microsoft.com/kb/958044/
Thank you, and in what concerns:
Ajay K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
-
Get I/O device 0x08078002A error code when you try to backup in Windows 7.
Original title: backup problem WIN7
I recently had to replace my HARD drive. I added an external HDD, IOMEGA Prestige II. When I ran the backup, there was error: unsuccessful backup. OS WIN7: I/O device 0x08078002A and Error errorcode internal 0xC003005.
Hello
Welcome to the Microsoft Community and thanks for posting the question.
Looks like you get an error when you try to save.
Try these steps and check:
Method 1:
I suggest you run a Sfc scan on the computer and check.
a. click Start, type cmd in the Search box, right-click cmd.exe in the programs list, and then click run as administrator.
If you are prompted for an administrator password or for confirmation, type your password, or click continue.
b. at a command prompt, type the following command and press ENTER:
CHKDSK /R
Collapse this tableauAgrandir this tableNote : In this command, is a placeholder that represents the drive letter of the volume you want to check. c. press y when you are prompted to check the drive the next time the system restarts.
d. close all applications and restart the computer.
The collapse of this Expand table this tableNote: When you restart, Windows checks the drive for errors, and then Windows starts. e. after the computer restarts, repeat steps 1 through 4 for the other volume and try the backup operation again.
Method 2:
SFC scanner on the computer to ensure that the system files are intact:
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833
Hope this information helps. If you have any other questions feel free to respond and we will be happy to help.
-
get the 0xC004D301 error code when you try to install streets &; trips 2013
last week I did an automatic update of windows & shutdown. The computer would not come when I went to use it the next day. Ended up doing a refresh and found that none of the programs would work more. I have to reinstall so everything manually. Tried to reinstall "streets and trips 2013", but will not be installed. gives me the error code shown above. What I do with him now? (by-the-way, I hate windows 8)
Hello
The question you posted would be better suited in Microsoft Highway and Streets & Trips or MapPoint forums:
http://social.Microsoft.com/forums/en-us/home?Forum=streetsandtrips
-
I use Windows XP Home Edition Version 2002 Service Pack 3.
Here is a link to a thread on the MSDN forums dealing with this problem and a possible solution. Thread Also, if you run law or another program directly using SQL, you can try to uninstall the program, run the update, then reinstall the program. If you have tried only to install this through Windows Update you can want to download it and run it directly from your desktop.
Mike - Engineer Support Microsoft Answers
Visit our Microsoft answers feedback Forum and let us know what you think. -
I succumbed to update my Photoshop CS6 in creative cloud. I receive a notice indicating that the update failed and that errors were encountered during installation (U44M1P7) I tried twice to contact Adobe customer service and had no luck... We have uninstalled and reinstalled the CS6 several times with no success... Any suggestions?
U44M1P7 - updates: http://helpx.adobe.com/creative-suite/kb/error-u44m1p7-installing-updates-ccm.html
... a solution to this problem.
1. launch of CC App (Photoshop, Illustrator, etc.)
2. go to HELP-> UPDATES
3. He will start Adobe Application Manager, then uncheck the BOX ALL of Adobe CSXS Infrastucture 4 files (910 KB) under all of your applications up-to-date.
4. click on the REFRESH"" button.
U44M1P7, U44M2P7 - CC help / cannot apply the extensions 6.0.2 update manager | Mac OS: http://helpx.adobe.com/creative-suite/kb/unable-apply-extension-manager-update.html
-
error messages
Might be better to post here: SQL Server Setup & Upgrade
http://social.msdn.Microsoft.com/forums/en-us/sqlsetupandupgrade/threads/
or
(5bc30920-5d3c-4a4e-8672-ff97b0e9252f) http://social.msdn.microsoft.com/Search/en-US/?query=737D%20&rq=meta:Search.MSForums.ForumID & rn = SQL + Server + mounting + % 26 + Upgrade + Forum TaurArian [MVP] 2005-2010 - Update Services -
Remember - this is a public forum so never post private information such as numbers of mail or telephone!
Ideas: I get the 0x80073AFC error code when I try to use the system restore then, how can I find and replace this file missing MUI?
I am running Windows 7 for packs SP 1 or SP 2 does NOT solve my problem since neither one works with Windows 7. Is there a way to search for this MUI (Multiple User Interface) missing file? The every thing must have himself installed in the first place. I took my mom (she died in June) and my brother on this PC as users so even if they do not use this PC supports multiple users. Maybe if I deleted as a reboot and additional users it will solve my problems. My updates install OK but I can't run at all system restore. It creates a restoration point OK but when I try to sr back to a restore point before I get the error 0x80073AFC topic of the missing MUI file. Then, when I spear SR it is said that he could not and no files have been changed because of the error 0x8000FFFF error, unspecified catastrophic failure and could not retrieve the file several times when system restore is attempted.
I'm running Windows 7 on a HP Pavilion with browser Firefox 3.6.8 browser Opera 10.60, IE8 and Google Chrome 5.0.375.125 browser browser.
Can you tell me what I try next? Thnks a lot and sayonara for now the guy-Jack McElwee / keimanzero the Scion of the Anime in Brookhaven PA - USA
OK I tried everything and nothing works! Only added beginners are updated browser Opera 10.63; IE9 (Beta); Firefox 3.6.12 and Google Chrome 7.0.517.41 and Java 22. Of course like everyone else in the world, I had to uninstall/enable and disable/download again and reinstall new Adobe Flash 10 and 11 of the shock wave and they keep crashing too! Hello 4 keep screwing browsers and now I get connection network problems. I run Comcast doctor and did everything it said to do, but nothing works. Oh and I added 7-Zip and WinZip also. Likewise, they will not work! Help! Thanks - K & K
keimanzero,
Comcast of Norton Security Suite version is installed? If Yes, who and perhaps malware is most likely to cause questions you have published, in particular the failure of the restoration of the system.
First, configure the system to boot - How to solve a problem by performing a boot in Windows Vista or in Windows 7
NOTE: Start-up mode minimum state all the 3rd party firewalls will be disabled. Open Control Panel > Windows Firewall to make sure that the native firewall of Windows 7 is now on.Download and Save the update system (or CheckSUR) tool. You will need to download the specific Version of CheckSUR corresponding to the architecture of the system to Windows 7. If you do not know the architecture of the system, and then click the link that says "Click here to show or hide the instructions step by step with images" under method 2: download the update directly system preparation tool from Microsoft Download Center .
Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2Once the download is complete, close all open programs and browsers. Now, run CheckSUR with the system connected to the internet because it will download the .cab for system files. Reboot once CheckSUR is complete.
Secondly, I suggest that you run the File Checker system while in the same clean boot state.
To run the System File Checker tool, follow these steps:- Click Start and type cmd in the field search programs and files .
- Right click on cmd.exe in the programs of list, and then choose 'run as administrator '.If you are prompted for an administrator password or a confirmation, type your password or click on continue.
- At the command prompt, enter the following line exactly as written including the space between thec and the/and then press ENTER:sfc/scannow
When the analysis is complete, test to see if the problems facing the system have been resolved.
If they are not, you will need to contact Norton support for the version of Norton Internet Security Comcast to get help, or just uninstall NIS, run the Norton removal tool (right click Norton_Removal_Tool.exe, choose "Run as Administrator"), reboot and then check to see if the problems are still occurring.
Expert MowGreen Windows IT Pro - consumer safety
-
I get the following error message when you try to install Windows Live Essentials for Windows 7 64-bit:
One of the installation files seems to be corrupted. HR:0 x 80070003Hello Amawob,
Thank you for using the Microsoft answers Forums.
Solution:
You cannot install some programs or updates.
http://support.Microsoft.com/kb/822798
Reset the Windows Update components.
http://support.Microsoft.com/kb/971058
That should solve the problem for you.
Thank you.
UDAY $012 please let me know that whether the solution worked or not, I thank you and appreciate your comments. URGO
-
Greetings
I run Photoshop CS6 on my windows 7 Ultimate (MacPro 2008 via Bootcamp). 12 GB of ram, 512 on the video card. A lot of disk space. None of the questions of knowledge, viruses, malware, etc.
I have stupidly? the Applications Adobe Manager to update all my Adobe apps. Since that time I now get the following error message when you try to create the Contact Sheet II in any of my SP6 or PS5.5 64-bit or 32-bit versions. «Cold is not complete the plug of command because Photoshop was unable to locate the plugin JavaScript» Re, I installed the latest update, but no change. My installation is built on CS4 extended, then with a version Standard 5, 5.5 and 6 facilities upgrade.
The Contact Sheet function was working well, until I ran the updates.
I'm in a bad place, as I am in the middle of multiple projects, everything I need to create Contacts for. I thank any help or give advice on how to fix this...
Help, please!
Try to run Photoshop with the SHIFT key is pressed and skip loading part tird plug-in and try to use the Board contact II. A version of plug-ins from third parties have been known to break Photoshop Scrippting.
-
I downloaded creative testing Cloud, Dreamweaver and Muse. I get the following error message when you try to start the Dreamweaver application '... Unable to start properly. 0xc000007b'. Muse starts without a problem. Is there something wrong with the download trial of Dreamweaver or is it my computer? I downloaded the Windows 7 premium, Intel, processor Pentium B940 2.0 ghz, 4 GB ram, 64-bit operating system.
... 07 b problems http://forums.adobe.com/thread/1355374?tstart=0
-
80070652 error code when you try to upgrade to windows 10 Windows 7.
* Original title: windows update error code
80070652 error code when you try to upgrade to windows 10 Windows 7
0 x 80070652 ERROR_INSTALL_ALREADY_RUNNING ErrorClientUpdateInProgress If the upgrade process sticks or does not respond to 99%, it is better to wait and do nothing for 5 to 6 hours. If there is still no progress to close the Wizard Windows 10 upgrade, restart the computer and try to upgrade following the tips detailed below.
You are using an ethernet cable or wireless to connect your computer to the router? Wired ethernet is faster and more reliable for large downloads. An ethernet cable is a low-cost purchase.
Connect to a power supply, if your computer is a portable computer.
Disable your anti-virus software so that the upgrade.
I suggest you to download the tool for creating Windows Media 10 ISO and make a place in upgrade.
Download the update of Windows Media Player 10 tool creation build 10586:
http://www.Microsoft.com/en-us/software-download/Windows10How to download an ISO using media tool:
http://www.tenforums.com/tutorials/9230-Windows-10-ISO-download.htmlHow to make a upgrade in Place using method 1:
http://www.tenforums.com/tutorials/16397-repair-install-Windows-10-place-upgrade.html#step6If this does not work please provide more information for your issue to be diagnosed.
Restart your computer and wait 20 minutes for the system to operate before you download information. When the review much, not Event Viewer log files all problems show in the period immediately after the computer has booted.
Please provide a copy of your system information file. Type the system information in the search box above the Start button and press the ENTER key (alternative is select Start, all programs, accessories, System Tools, system information). Select file, Export and give the file a name noting where it is located. Not to place the cursor in the body of the report before exporting the file. The system creates a new information file system each time system information is available. You must allow a minute or two before the file is completely filled before exporting a copy. Please download the file to your OneDrive, to share with everyone and post a link here. If the report is in one language other than English, please indicate the language.
Please download and share with everyone a new copy of your log System of your event viewer on your disc one and post a link here. It allows to avoid confusion if you delete all previous copies of the log files of your OneDrive.
To access the system, log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window, expand Windows logs and select System. Place the cursor on the system, select the Action in the Menu and record all events like (the evtx default file type) and give a name to the file. Do not offer not filtered files. Do not place the cursor in the list of reports before selecting the Action from the menu. Do not clear the logs so that you have a persistent problem.
For assistance OneDrive see paragraph 9.3:
-
Get the 0xC004C0003 error message when you try to activate Windows 7 using the old product key
Windows 7 error code 0xC004C0003
I reinstalled windows 7 on my old machine using a copy of the operasting system genuinr.After several attempts to activate it by using my old product key, I get the message error codecan you tell me why this is the case, and in any case I can resolve the issue quicklyHave you tried to restart by phone?
How to activate Windows 7 manually (activate by phone)
1) click Start and in the search for box type: slui.exe 4
(2) press the ENTER"" key.
(3) select your "country" in the list.
(4) choose the option "activate phone".
(5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
(6) explain your problem clearly to the support person.
http://support.Microsoft.com/kb/950929/en-usActivation error: 0XC004E003 http://support.microsoft.com/kb/938450
Maybe you are looking for
-
How to keep the toolbar bookmarks up there? She disappears every time I CK.
I downloaded firefox refresh and now every time I click on what whether bookmarks, file, edit, view, etc. goes away. I have to continue to use the f10 key to recover. I want him to stay permanently as it usually did.
-
Accounts not connecting...
I have my old Skype account over 10 years + my Microsoft account... Both use the same e-mail address - but they do not see each other or asking me to link. I currently have 2 separate accounts, both with the same e-mail address. An account has all th
-
Smartphones Strangest blackBerry email problems ever probably
I have the curve 8900 a couple of months now and email used to work perfectly since then. After a few months of my happy use of internet e-mail, all of a sudden I got my email more. so like any computer geek in that I looked inside can't find somethi
-
No puedo entrar a mi cuenta hotmail. blog directly an OUTLOOK y TENGO No.
Quisiera saber if HOTMAIL is having problems... porque hace dias that corta o not good blog... are as useless dejará verdad? Habra that pay para tenerlo. ?
-
I try to print via the network of the gateway to a HP Jet 8500 a desktop and can not solve
printer is listed in Quebec (the only printer we have) but never print the page of test etc. Help