Get no results in the constraints guests

Similar Questions

• Not get scheduling results in the browser of the operator?

  Hello

  I'm scheduling for scenario. I don't get the results in the browser of the operator.  Please find below the screenshot.

  Please help me with the planning. Please solve this problem

  Thanks in advance,

  Bruno has.

  

  Hello

  I got the answer of gurus odi.

  To resolve this problem, I changed the odiparams properties & I did it again agent. Now his work.

  Thank you best regards &,.

  A.Kavya.

• Can I get some results with the SDK sample debugging?

  Debugging a sample project folder in VB2008 Je couldn't get no results. Où an InDesign plugin Add?

  There is a close the .exe plugins folder, or you create a file PlugInConfig.txt.

  See "se - started.pdf ' (e.g. page 13 version CS6).

• Get-clusters. Get-view resulting with the argument cannot be null or empty

  Recently, one of my faithful scripts stopped working - all the words of wisdom and advice are welcome.

  SCRIPT:

  $clusters = get-Cluster | Get-opinion

  foreach ($cluster in $clusters)

  {

  $1stESXinCluster = Get-VIObjectByVIView - MORef $cluster. Host [0]

  }

  RESULT:

  The argument cannot be null or empty.

  In: line tank: 5:46

  + $1stESXinCluster = Get-VIObjectByVIView - MORef < < < < $cluster. Host [0]

  It would be possible, one of the pole which is located in $cluster is without a host.

  You can add the conditional operator in the present.

  $clusters = Get-Cluster | get-view
  foreach ($cluster in $clusters)
  {
  if ($cluster.Host[0]-ne $null){
  $1stESXinCluster = Get-VIObjectByVIView -MORef $cluster.Host[0]
       }
  }
  

  Hope this helps

• How can I get good results from the detection of matching/shape of reason for this image?

  I need to be able to identify all nine squares in the first image (0000094718...) and others like him.  I tried to detect shape, filtering and geometric pattern match.  I tried to vary all parameters within these functions.  I tried the image preprocessing (and the model, if any: usually created from only one of the boxes) with thresholding and/or a muliplier before using the detection or the corresponding function and I still can not get all nine boxes and only these nine boxes.

  Can someone offer some help?  Ideally I would be able to use the shape detection, because it returns the coordinates of the corner rectangles and those who are particularly useful to me.  What confuses me about this feature, is that after setting the width/height minimum/maximum of rectangles to find, the program seems to ignore these instructions and returns matches outside these limits.

  It would be even better to be able to have a script which will identify all nine boxes in two attached images.  The boxes in the second image (X820A32) are more square.

  Thank you

  Holly

  Try the attached script.  I think that you use only may not be the optimal threshold values.  You may find that you want to use a smoothing filter before making the threshold.  This should also help with nuisance particles.

• Why do I get different results for the same resolution but different boxes of Windows, Windows 7 and XP

  I use an .exe on two different windows boxes, in Windows 7 and XP.  I put both for resolution 1024 x 768.

  Win 7 (old laptop and Dell desktop computer) I have a large application to watch.  On the WIn XP boxes all fonts to big.  It doesn't make sense for me as all PC's have the same resolution.

  Has anyone go through this before?

  System for XP and Vista/Win7 fonts are different.

  See

  http://forums.NI.com/T5/LabVIEW/elements-have-moved-when-opening-VI-with-F3-patch/m-p/1054817

  http://forums.NI.com/T5/LabVIEW/what-can-affect-the-size-of-a-front-panel-object-between/m-p/1058607...

  http://forums.NI.com/T5/LabVIEW/font-size-on-Windows-7-with-LabVIEW-2009/m-p/1055114/highlight/true#...

  and several other similar topics.

• Results of the difference of two queries with a result zero

  Hello
  
  I use a query, as shown in the following example:
  
  SELECT the vault, id1 - id2, wf1 - wf2 tr1 - tr2 OF
  (SELECT sc, SUM (id1), SUM (wf1), SUM (tr1) FROM table1 GROUP BY sc) a.,
  (SELECT sc, SUM (id2), SUM (wf2), (tr2) SUM OF table2 GROUP BY sc) b
  WHERE arch = BSC.
  
  The results are good, but I have the problem if the baccalaureate is NULL that I get a result for the values. What I need, is that the result should show the vault and other values, if the degree is NULL.

  As

   SQL> select distinct deptno from emp
    2  /
  
      DEPTNO
  ----------
          30
          20
          10
  
  SQL> select deptno from dept
    2  /
  
      DEPTNO
  ----------
          10
          20
          30
          40
  
  SQL> select
    2     nvl(e.deptno, d.deptno) , nvl(e.c1,d.c1)
    3  from
    4     (select deptno, count(*) c1 from emp group by deptno ) e,
    5     (select deptno, count(*) c1 from dept group by deptno ) d
    6  where
    7     e.deptno (+) = d.deptno
    8  /
  
  NVL(E.DEPTNO,D.DEPTNO) NVL(E.C1,D.C1)
  ---------------------- --------------
                      30              6
                      20              5
                      10              3
                      40              1
  
  SQL>
  

  Published by: s_2 on November 3, 2008 17:37

• How can I get more results that contain the tag/bookmark appears in the awesome bar? Currently, it will show only 4.

  When I type a word in the address/url/awesome bar it's a word that I know that I used as a tag on several pages of a bookmark, only 4 results in the menu drop-down are marked pages of a bookmark. The rest of the pages in the menu drop-down are other pages available on the web. Because only 4 results are pages I tagged, the page I want to (and scoring) often does not appear. Is there a setting I can change to make it show more results? Or is there a way once I get the original results to add extra elements containing the tag / my favorites?

  This may be a problem with the Fastestfox extension.
  See Troubleshooting extensions and themes and problems of hardware acceleration to resolve common Firefox problems

  In the FastestFox Options, uncheck the 'Awesomebar improving '.

  See the 10 image in the image gallery: https://addons.mozilla.org/firefox/addon/9825

  https://addons.Mozilla.org/IMG/uploads/previews/thumbs/37/37975.PNG

• Why can I get two different results from the same coefficients?

  I get two different results of the evaluation of the polynomial function.

  For the first, I get the coefficients of a polynomial function to adapt.  I feed the coefficients of the function made the function Eval Poly and get the correct 12.8582 result when I evaluate 49940.

  For the second, I create constant array of values that have been returned by the polynomial Fit function (I typed in).  However, I get an incorrect result of - 120.7913 when I feed the constant table the function Eval Poly when I evauate 49940.

  How this can happen when I use the same values in table?

  A picture of what I explained is attached.

  Hi Altran,

  are you sure about using the 'same '?

  You compare them? Do you have (at least) set them to 17 digits display properties?

  Please attach a VI instead of an image...

• Get the result of the sequence by programming

  Hi all

  in my custom operator interface to save the event EndExecution callback to accomplish several final operation.

  What I can't do is to retrieve the result of the sequence ('Success' or 'Failure', exactly the one that is displayed in the default report under the voice "Result USE") using methods or properties API.

  I've tried Execution.ResultStatus property and the SequenceContext.SequenceFailed property, but none of them works.

  How can I get the result of the sequence?

  Thank you

  Process templates are already generating a Message from the user interface "TestingComplete" you can register an event reminder on.  It also transmits the result as part of the parameter string State.  The attached excerpt from LV show what the VI recall may contain to handle the event.  If you need to deal with other UI event codes you can wire the event directly number in the structure box for the 34 decimal 'TestingComplete' event code.

  P.S., the event is the same that Norbert has pointed out, event UIMessageEvent...

• How to get the result of the test of CVI DLLs in teststand!

  I write a driver dll to test a source, I want to get the tension of world SERVERS (the instrument of the RS) and I used to call DLLs that written by CVI, teststand

  My question is what is the best way I can get the result of the test and show the user to teststand. the code below is fair? When I used to call this dll document, teststand

  "" I just get the result by setting in TS.this is a good meathod, and what should you do in teststand, I put the "outputVoltageV" point to an object?

  /*===========================================================================*/
  / * Function: read voltage/current output * /.
  / * End: this function returns the output and actual output voltage * /.
  / * current instrument.                                      */
  /*===========================================================================*/
  ViStatus _VI_FUNC rsngsm_datReadOutput (ViSession instrSession,
  ViPReal64 outputVoltageV, ViPReal64 outputCurrentA, ViPBoolean statusPeakCurrent)
  {
  ViStatus rsngsm_status = VI_SUCCESS;
  Bruno buf [BUFFER_SIZE];
  ViInt32 retCnt;
     
  FMT (buf, "%s<>
  If ((rsngsm_status = viWrite (instrSession, buf, NumFmtdBytes (), & retCnt))<>
  Return rsngsm_status;
         
  If ((rsngsm_status = viRead (instrSession, buf, 50, & retCnt))<>
  Return rsngsm_status;
  If (Scan (buf, "%s > %f [p2];")) %f [p2]; %i [b2] ", outputVoltageV, outputCurrentA, statusPeakCurrent). = 3)
  Return rsngsm_status;
         
  Return rsngsm_status;
  }

  sean_tan,

  Yes, you just pass a value of digital TestStand (e.g.; locals.number).

  If you use the adapter of the ICB, it might make more sense that you can use the Flexible DLL adapter for this type of function, that you do not use the standard settings of tTestData and tTestError. While TestStand will correctly recognize the function prototype, you want to make sure you that include the type library of your function Panel (you will need to create one if you have not already done so) in settings target of LabWindows / CVI-> type library.

  I hope this helps.

  -Jack

• When I look for a file in Win Explorer, I get a list of files in the search results. But some of the files seem to be missing. I get a message that the directory is not found when I try to open the search results.

  I wonder if what's on my hard drive and if what Win Explorer is on my hard drive are two different things.

  If I do a search in Win Explorer to "purple", I get a number of results.
  (To search for a file, I am in the word "Purple" in the search field in the upper right Win Explorer and pressing the "Enter" button).

  There are a couple of JPG files that I wonder about the search results.
  One example is called "purple_flowers.jpg".
  When I double-click this file in the search results to open it, my paint program opens and gives me a message that the directory is not found. If I use MS Paint to try and open it by double-clicking on the file and selecting "open with...". MS Paint", I get a message that the directory is not valid.

  The location of the directory on the error message is the blue 'Images' folder for my user. But, when I opened this file, I don't have a file with that name in this directory. The same thing happens with another JPG file, called "octopus.jpg" when I search the word 'Octopus '.

  Is this something messed up between what I have on my hard drive and think what Win Explorer is on my hard drive?
  How can I fix?
  Something must be reset in Win Explorer?

  I could have the JPG files with these names at the same time. I had a large library of images for a project, but I deleted it.
  (I tried to turn on the option to show hidden files in this directory, but that did not help).

  Imane:

  I thank very you much for that answer.
  But it seems to have stumbled on the solution:

  Strangely, this worked:

  (Maybe you know why).

  I moved the files in my blue images folder in another folder, delete the folder images blue, emptied the Recycle Bin and rebooted my computer.
   
  When my computer has finished its startup routines, my folder of photos blue was there! And he had the shortcut to the folder 'Sample Pictures' inside.
   
  When I searched "the Octopus" and "purple", I no longer saw these JPG files in the search results.
   
  I don't really know what happened, but I thought that after these results just in case someone else knows this.

  I'll read and watch in your information. I don't want to know more about what is happening in my computer.

  Marz

• All they can do is go on the Internet Explore. So my question is how to get features of office for a guest user?

  Hi, I want to let my friend use my laptop and I need to set up a guest account. The problem is that when I did it, we cannot access Office so that the person cannot create any word or excel files, etc. All they can do is go on the Internet Explore. So my question is how to get features of office for a guest user?

  Don't add a guest account, add another standard user if you want another user to access programs as well.

  User account - add a new user in Windows 8

• Get the result of the procedure

  Hi all

  I have a procedure using storeb from the collection in an object of type as:

  create or replace type calc_type as object
  (
  field1 number,
  field2 number,
  field3 varchar2);
  
  create or replace type calc_table as table of calc_type;
  
  procedure make_calc_sched(v_id in number, v_user_id in varchar2) is 
  
  table_calc calc_table;
  begin
    select s.id, s.price, s.desc
    bulk collect into table_calc
    from tableA s
    inner join tableB d on d.id = s.id
    --.....
    
  end;
  

  How can I get the result of the procedure?

  procedure make_calc_sched(v_id in number, v_user_id in varchar2, v_table in out ????) is
  

  I plan to put up-to-date and inserts using the FORALL sentence.

  Can I use slider?  Maybe is a better way to do it.

  With the help of Oracle Database 11 g Enterprise Edition Release 11.2.0.4.0

  Thank you

  I think I got it:

  procedure make_calc_sched(v_id in number, v_user_id in varchar2, v_table out calc_table) is 
  
  begin
    select calc_type(s.id, s.price, s.desc)
    bulk collect into v_table
    from tableA s
    inner join tableB d on d.id = s.id
    --.....
  
  end;
  

  I'll look to materialize views more later. Someone at - it examples?

  Best,

• With the help of Windown 10, not all pdf documents launch Adobe Reader DC.  As a result, I have not all normally available printing options.  How can I get Reader to open the default player.  I need to clear, step by step direcitons, please.  Thank you

  With the help of Windows 10, not all pdf documents launch Adobe Reader DC.  As a result, I have not all normally available printing options.  How can I get Reader to open the default player.  I need to clear, step-by-step instructions, please.  Thank you

  Hello

  Please visit the following link to set the reader as default PDF reader.

  Restoration of Adobe Acrobat Reader in the default PDF Viewer

  Concerning

  Sukrit diallo