Get random blocks of black pixels in the blue areas of the image.

Similar Questions

• I'm trying to scan a picture 8 x 11, but I get only 4 x 6 portions of the image.

  I'm trying to scan a picture 8 x 11, but I get only 4 x 6 portions of the image.

  I'm on OS 10.7.3 and a B210 printer

  Hello
  It seems that the default scanning workflows configured to crop the image to its default settings.

  First, install the critical update below:
  http://FTP.HP.com/pub/softlib/software12/COL41827/MP-101648-1/HP_Scan_for_Mac_OS_X_10.7_Update.dmg

  Now change the settings of the device as follows:
  1 open the HP utility and select your device.
  2. based on Scan Settings open the "Scan to Computer".
  3. click on the tab "scan tasks.
  4. Select the shortcut Scan allows to analyze, and then click on edit.
  5. in the section of scanning from an HP device, click the blue triangle to expand the menu.
  6. in the expanded menu now, open the drop down next to cultures in and set as none.
  7. click OK and try to scan the image.

  Please let me know of any changes,
  Shlomi

• I use a mac and when I try to save a file I get this message.   Unable to save the image.  Do not have enough access privileges. -5000

  I use a mac and when I try to save a file I get this message.   Unable to save the image.  Do not have enough access privileges. -5000

  local disk, I think he was trying to save it in the templates folder.  I changed it to save it on my counter top and it worked.  Rookie mistake.  This had to be the problem.

  Thank you

• In LR CC why have black pixels to the point, began to turn blue?

  This has only started happening recently - when photo editing, black areas 'darkest' of the image starts to turn to the blue pixels. This means that the image requires further editing. THS happens on newly imported photos and on those previously published - who, until recently, did not have the blue pixels?

  The blue overlay shows the shadow cutting. Press J to turn it off.

  An overlay in red shows the highlight clipping.

• Lock the pixels of the image, how to unlock?

  Open a JPEG in Camera Raw in bridge, make some adjustments and I have to open the image as a smart object in Photoshop. Then I create an adjustment layer and also to change the style of the smart object layer (inner glow and a stroke). I save the layer style by default because I have a lot of pictures that I want to have the same "border".

  I save my smart object and start with the next photo of the bridge, Camera Raw, and then in Photoshop as a smart object. I add a layer, then I change the style for the smart object layer and now my settings are by default so very easy.

  BUT I do not see my new frontier on the second smart object! After a long time I did know that the first two icons beside the lock in the layers panel are "locked", I can't change their. The other two are open to change.

  So my question is 1) what happened, what's the difference, why my pixels are locked in the second photo? and (2) how can I unlock the pixels?

  Yes, I tried 10 to 15 times with other photos and I get the same result, my way to get a flexible border around my photos do not work.

  I've never been an expert in Photoshop and now I'm very rusty, I didn't touch the program for 8 months.

  I have Photoshop CS5 Extended worm 12.0.64 (software update).

  So, if anyone can tell me what is the problem, I will be very happy!

  Sven

  Your friend is a simple problem to solve...
  
  

• Draw the line or point to a specific pixel on the image

  Hi all

  I have an image in 8-bit grayscale, I extracted the Image column indeces who have defects. I need to mark the defective pixels with an indication of line or a point on the image. Can anyone suggest me how to go to that topic.

  Hello

  first of all, I do not know how to interpret 'column clues', but in the entrance to overlay you pass it as a coordinated 'y' - it should be "indices of lines? You use image rotation?

  Secondly, why you pass an array empty for loop for coordinates 'x '? So that the oval of overlay to work, you must enter valid "x, y" coordinates of the location of the oval.

  Best regards

  K

• Invert the Pixels of the Image

  Hello

  I have a vi that calculated centroid and diameter, and the algorithm behind it works on intensity levels. My current work is on cards, so I need to reverse my pixels of images (see attachment file). He NEITHER has a built in reserved vi which (except invert IMAQ)?

  Thank you

  It works very well.  You don't see the results.  You load a new image in the next iteration until it had time to update the display.  The new image replaces the previous reverse image.

  Try the following solutions:

  Add a delay to your loop.  The two views shows the current version of the image (reversed).

  Switch the right-click on the snapshot on both screens.  This preserves the image in the State wherever it was when you posted it.  Very useful when you keep reusing the same image for processing.

  You can also use probes, which should use the snapshot method.

  Bruce

• Block of BLACK censor on the eyes: put

  Hello

  I must put a black bar, censor on my eyes (male) in the film: /interview3/2.mp4

  https://Mega.co.nz/#! VY9mWD6b! ei6O8DQkEzT5jsw0CvSbngzB5-QYBeVb8mnZ5hY6Jtc

  I have 32-bit laptop, do not have the adobe elements; I tested the WAX / all other methods (Windows Movie Maker left, but it can be done on this video). Each of them has failed (WAX crashed, WMM has not been able to provide such functions; circles are not a solution; it must look professional).

  It is a second sequence of 10; the last part of the file. I require it for the promotion of the book (free): http://importance.prv.pl/The.Most.Important.Knowledge.You.would.Ever.Read.Implement.and.Li ve.up.to.Forever.pdf

  Could someone help me with it, by (it's a 3 minute job). Please let me know what I could do for you in return, first / or simply help.

  Thank you

  Bill,

  Yep! That's how I did it.

  They dance pretty fast, so I ended up having to keyframe almost every picture. I had the title on the scale, rotate and move it.

  This is a short clip, otherwise it would have taken too long. But what the hell? I thought I could get it done since my first appointment this morning is less than an hour's drive and is not until 10 PM PST.

• Tecra M4 - lines of vertical black pixel on the screen

  Hello

  This morning I turned on my laptop and suddenly I have vertical black pixellines more my whole screen.
  There's a line that works normally, who is black, a job, a black man,... and this all over the screen.
  In this same way read something is very difficult.

  I have no idea what can be wrong, I did not install something recently or anything like that. I tried the system recovery, but the problem will not be solved.

  No idea what this can be?
  I appreciate your help!

  Sincerely,
  Seppe

  > I tried system recovery, but the problem will not be solved.
  It looks like a hardware problem, but try the BIOS default. In order to access the BIOS press ESC and F1 at the beginning.

  On the other hand I recommend you connect the external monitor to the laptop to determine what might be wrong.
  If the same lines would appear on external monitor, then a graphics card failure can cause this problem ;(

• My laptop won't boot. All I get is a white, black screen with the cursor flashes in the corner.

  I tried boot cd of the Hiren s and changed the boot order to cd drive.  That did not work.

  My laptop is a compaq, about 8 years old and winxp.

  Press ctrl-alt-delete. If it works, go to file / new task, type explorer.exe. This brings to the top of the desktop computer? I wouldn't use Hirens CD. Go into the BIOS and change to the hard drive. If windows is installed

• I get an error code 0146 and or the image of exe.bad the logon user interface

  I can't reboot my computer, I keep the error code and get or bad image. I have almost everything and I keep getting the black screen reads LogonUIexe.bad image and when I do the test I get an error code 2000 - 0146.help.

  Hello

  I suggest you to follow these steps and check if that helps.

  Method 1:

  Try to start the computer in safe mode and check if the same problem occurs:
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Method 2:

  Try to perform the verification and startup repair if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  It will be useful.

• I get whenever after the return of four black bands around the video, I would like to fix this because it is really unprofessional.

  Sorry for my bad English, I have a problem with adobe first 12 items when I go I get a video of black bars on the sides of the screen, which makes the smaller video. How can I fix it?

  Bram Bakker

  Everything which has been written and this last screenshot of yours, there may be an answer. For some unknown reason, the preset of the project were wanton for your source of 1920 x 1080.

  Open a new project and access the workspace Expert.

  In the Expert workspace, go to the File Menu/New/Project and click project. You will see

  the new project dialog box pop up.

  

  Click on the "Edit settings" button in the new project dialog box that appeared.

  After clicking on the "Edit settings" button to bring up the edit parameters dialog box.

  Browse the list and set the project preset for

  PAL

  DIGITAL SLR

  1080 p

  DSLR 1080p25

  as shown in the following screenshot.

  

  When you click OK in the change settings dialog box, you should see

  the new new project dialog box (see the following screenshot). This time it displays your

  newly defined the project preset. Place a check beside where it says 'Force selected.

  Setting of the project on this project.

  

  And then click OK to return to the workspace of elements Expert first.

  In the Expert of 12 elements of first workspace, use add active media/files and folders/projects

  and drag your active project to the Timeline video video track 1. You should not see any black borders.

  It's a very unusual situation for the 720 x 480 at 29.97 frames per second project preset unless you actually set

  It manually. But please, we'll see what happens when you go through the instructions of setting up project at the above address.

  Thank you.

  RTA

• draw the line between black pixel: coordinates of the selected pixels?

  Hello

  I want to build a script that can check a Photoshop file and:

  -find the black pixel

  -for each black pixel, looking for an another black pixel at a maximum distance of 5 pixels

  -then draw a line between the two black pixels.

  I wrote this script below (my first script...), but it's VERY slow (and my final image is VERY large), I think because I test the color for each pixel in the image.

  So an alternative would be to select a black pixel with the wand, then the script record all the details of the selected pixels, then my script wil test only the pixels (less than 1% of the pixels are black in my image).

  Is this possible with JavaScript?

  Thank you for your answer!

  Marc

  function main(){
   var startRulerUnits = app.preferences.rulerUnits;
   app.preferences.rulerUnits = Units.PIXELS;
  
  
   var myHeight = app.activeDocument.height;
   var myWidth = app.activeDocument.width;
  
  
  // Find black pixel
   for(var i=5; i<myWidth; i++) {
    for(var j=5; j<myHeight; j++) {
     activeDocument.colorSamplers.removeAll()
     var sampler = activeDocument.colorSamplers.add([new UnitValue (i, 'px'), new UnitValue (j, 'px')]);
     if (sampler.color.rgb.hexValue === "000000") {
  
  
  // For each black pixel, search another black pixel below left up to 5 pixels
      for (var m=i-5; m<i; m++) {
       for (var n=j+1; n<j+5; n++) {
        activeDocument.colorSamplers.removeAll()
        var test = activeDocument.colorSamplers.add([new UnitValue (m, 'px'), new UnitValue (n, 'px')]);
        if (test.color.rgb.hexValue === "000000") {
  
  
  // Then draw a black line between the two black pixels
         var FillColour = new SolidColor;
         FillColour.rgb.hexValue = '000000';
         var ad=activeDocument;
         ad.selection.select([[m,n],[i,j],[m,n+1],[i,j+1]], SelectionType.REPLACE, 0, true);
         ad.selection.fill(FillColour);
         ad.selection.deselect()
        }
       }
  
  
  // For each black pixel, search another black pixel below right up to 5 pixels
       for (var m=i+1; m<i+5; m++) {
        for (var n=j; n<j+5; n++) {
         activeDocument.colorSamplers.removeAll()
         var test = activeDocument.colorSamplers.add([new UnitValue (m, 'px'), new UnitValue (n, 'px')]);
         if (test.color.rgb.hexValue === "000000") {
  
  
  // Then draw a black line between the two black pixels
          var FillColour = new SolidColor;
          FillColour.rgb.hexValue = '000000';
          var ad=activeDocument;
          ad.selection.select([[i,j],[m,n],[m,n+1],[i,j+1]], SelectionType.REPLACE, 0, true);
          ad.selection.fill(FillColour);
          ad.selection.deselect()
         }
        }
       }
      }
     }
    }
   }
  }
  main();
  
  

  If someone wants to do the same thing, the ImageJ software works very well on very large images (1 billion pixels) by the process according to > binary > close

• INCH BLACK LINES DOWN THE SIDES OF THE SCREEN OF MY LAPTOP SINCE THE INSTALLATION OF WINDOWS 7 NEED HELP... PLEASE

  Ive just installed windows 7 on my copy of vista 64-bit. the thing is tho now my office is not whole screen on my hp laptop. It was fine with vista, but I am new to windows 7 and do not know what to change. Ive got two black line on both sides of my screen about an inch in size. HELP PLEASE

  Right click anywhere on the blank desktop (not on an icon), and then select the screen resolution.

  Under the box with the image of the screen the middle button label resolution with a value in the button X y. click on the arrow and is the slider at the top? The highest option "recommended" on this subject.

  If the second answer is, the graphics card no doubt is not installed properly and needs a update driver because he did not interview the screen to get his abilities properly.

  If this is the recommended option resolution corresponds to what you believe the display is capable of. Slide this setting and select apply and see if the black bars and the image fills the screen.

  An LCD has a fixed number of pixels wide and high, and has a specific ratio. The standard reports are 4:3, 16:9 or 16:10. With black bars or the other side, it is very likely, the screen is a ratio of 16:9, but the graphical output is 4:3. Some stretch to fit other screens the black bands.

  Any setting other than the good for the screen will produce a soft image with a loss of sharpness.

• Tecra M4 - black spots behind the display Tablet cover

  After an intense action of cleaning every month, I recognized a few black dots on the back side of the front glass of the tablet. I did some checking of finger on the screen to see if it's a pixel error. I can say with any doubt that he is not a pixel error.

  After a Google search I found people describing the same. It is assumed that it is the result of fan heavy work.

  Y at - it no support out there that can help me solve this problem?

  Hello

  I put t really understand the link between the black dots on the screen and the heavy work module cooling.
  For me this internet s nonsense provides a lot of information useful but also very stupid gossips, myths and stories

  Always it is that you have a few black pixels on the TFT display and it sounds like a hardware problem.
  So in this case, there is only one solution; This part is replaced or repaired I guess, it should be replaced

  For all replacements, you will need to contact the ASP in your country. Ask them to help and managing others.

  Good bye