Get the code 80072EFD when you try to download an update of Windows security.

Similar Questions

• Getting error code 80004005 When you try to install an update to windows 7

  When you try to install an update to windows 7, I get a failure during Windows Setup. The error code is 80004005.

  80004005 = unknown error 0 x - can occur due to programs/services to interfere in the background.

  http://support.Microsoft.com/kb/929135
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• get cannot load the metafile message when you try to download adobe readerx for windows 7 professu international =

  get cannot load the metafile message when you try to download adobe reader x

  You receive this message during the download or installation ?

  If during the installation, try the Installer http://get.adobe.com/reader/enterprise/ offline

• Get the Error Message When you try to download and install Vista Service Pack 1

  Hello

  Update Windows guard neglect when you try to download and install Vista Service Pack 1 and I get the error message 80092004.  Please notify.

  Thank you
  Andy

  Hello

  Welcome to the windows vista forums.

  1. stop the Windows Update service (make sure that you are logged on as administrator)

  Click the Start button | Control Panel | System and Maintenance | Administration tools
  Double-click Services.
  (Provide the administrator password or a confirmation if prompted to do so.)
  Right-click the Windows Update service and click on stop.

  2. Click Start, type %windir%\System32 in the search box and press ENTER.

  Find and rename the folder C:\Windows\SoftwareDistribution.

  3. start the Windows Update service

  Start button | Control Panel | System and Maintenance | Administration tools
  Double-click Services.
  (Provide the administrator password or a confirmation if prompted to do so.)
  Right-click the Windows Update service and click Start.

  This procedure will erase your history on the Windows Update Site. Not important.

  Don't forget to restart and then try the update again. If there is no corruption in that
  folder, it would be gone now.

   

  Please, try now to windows update and check if you get the error.

  You can also download the stand-alone SP1 package. You can download the windows vista SP1 by clicking on the link below, please follow the instructions in method 3 in the KB article:

  http://support.Microsoft.com/kb/935791#Method3

  I hope this information is useful.

  Please let us know if you need further assistance.

  Concerning
  Rehman - Microsoft Support

• get the 0xC004F015 error when you try to save a license of windows 7 using a kms server.

  C:\Windows\System32>cscript c:\Windows\System32\slmgr.vbs-ipk xxxxx-xxxxx-xxxxx
  -xxxxx-xxxxx
  Microsoft (R) Windows Script Host Version 5.8
  Copyright (C) Microsoft Corporation. All rights reserved.

  (Yes, I used an activation number real not xxxx)

  On a computer running Microsoft Windows non-core, run 'slui.exe 0x2a 0xC.
  004F015' to display the error text.
  Error: 0xC004F015

  When I run
  C:\Windows\System32>slui.exe 0x2a 0xC004F015

  I get a pop up that says that the license of the software service reported that the license is not installed.

  without any indication of which is the problem, I don't know how to deal with.

  Thank you

  Chuck

  Hey Chuck1234567890,

  Please check the following threads who speak the same error code with the installation of the KMS server. There are several suggestions that worked. See the one that helps you get the fixed number.

  Cannot install the KMS for Windows 7 Enterprise key

  http://social.technet.Microsoft.com/forums/en-us/w7itproinstall/thread/1530dea9-9E42-40E3-b381-7eac11079c23

   

  Problems of KMS server

  http://social.technet.Microsoft.com/forums/en-us/itprovistaactivation/thread/153a2021-01d9-4c5c-968e-68a0b6d84b20

  Not accepting KMS host does not VLK published the KMS key.

  http://social.technet.Microsoft.com/forums/en-us/winservergen/thread/1bbcc441-9988-4283-AE9A-f58a5d100205

  Problem with the product key

  http://social.technet.Microsoft.com/forums/en-us/winservercore/thread/932bd843-7B94-4ADB-9751-2b15f7a238f7

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Get the error: 0xc00d11d1 when you try to play any media in Windows 8

  I get a problem with 0xc00d11d1.  Tells me I do not have the appropriate, drivers but don't tell me where to get them (or what they are).  Cannot run the media on Windows Media Player, Zune or the built-in app I bought from (video xbox).  Cannot run on an outsourced as Winamp or VLC Player.  Very disappointing to spend money on a product and then hours trying to get the product to work.

  So I found the solution to my problem - not sure whether it will help you.

  1. I had a displaylink driver (look at the programs to see if you have a), which has been the cause

  2 update the driver with one here: http://www.displaylink.com/support/sla.php?fileid=88

  I hope it helps someone.

• Get "Error Code 646" when you try to download the update KB957789 for update is not installed

  I tried everything to be able to install the KB957789 update which is an update of security for Microsoft PowerPoint 2007.  I was able to install some other updates correctly, but it will not be installed.  It has been a few days now that I've tried because comes this update on 5/11 I think.  It gives me this message: "error...". Code 646 Windows Update encountered an unknown error. "I have a Dell Inspiron E1505 with Windows Vista Premium and I have 1 installed SP and each update installed on it as well.  Please help me with this problem.  Thank you very much.

  You can also try to re - install Office. That might solve your problems, or that we will know if the ir problem from Windows or if there is a problem with Office
  --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
  Martin
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Get the 8004FF84 error when you try to download and install an upgrade for Windows

  I can't download and install an upgrade for windows. Try to install the product error code 8004FF84.

  Installation may stop if the system cannot copy files. Here are some possible causes and solutions for this problem:

  Your Windows installation disc is scratched, smudged, or dirty. Clean the disc with a soft cloth, insert it in the CD or DVD drive, and then start the Windows installation again. If your installation disc is damaged, you may need to replace it. For more information, go to how to replace lost, broken, or missing Microsoft software or hardware on the Microsoft Web site.

  Your CD-ROM or DVD drive is not working properly or the disk might be vibrating too much for the laser correctly read data. For more information about this problem, see your hardware documentation or contact the manufacturer of the CD or DVD drive.

  If your computer has multiple CD or DVD drives, your computer may attempt to locate files on the wrong drive. If your computer has a feature to disable CD or DVD drives that are not used, turn off readers that you don't use. Otherwise, try to insert the disc in a different drive, and then restart the installation.

  This is usually caused by hardware or software that is not compatible with Windows 7. If you have this problem, follow these steps:

  Wait about 10 minutes to see if the installation continues. Look at the led on the hard drive (often a small light on your computer that blinks when your hard drive is running) to see if there is no activity. If your hard drive seems to be working, the installation must be current. If your hard disk doesn't seem to work, go to step 2.

  Uninstall all antivirus software, and then restart your computer. Don't forget to enable antivirus software after you install Windows.

  If the installation fails again, it may be a hardware incompatibility problem. Go to the Windows 7 Upgrade Advisor on the Microsoft website to see if your computer can run Windows 7.

  If you have compatible hardware and your computer still stops responding, disable any unnecessary material. Remove (USB) universal serial bus devices. Remove or disable network cards, sound cards and cards of the series; and then restart the installation.

  If the computer still stops responding during Setup, contact your manufacturer computer or your retailer.

• get the fatal error when you try to start Windows 7 Easy Transfer...

  get the fatal error when you try to start Windows 7 Easy Transfer... what should I do?

  Hello Jo,.

  Thanks for posting your question on the Microsoft community.

  We need more information about the issue so that we can help you better.

  What is the full error message or code when you say, ""getting fatal error when you try to start Windows 7 Easy Transfer? '"

  Thank you for details on the issue.

  This problem may occur because of damaged or missing Windows files.

  I suggest you run the system file checker (SFC) and see if it helps.
  Reference:
  Use the System File Checker tool to repair missing or corrupted system files
  https://support.Microsoft.com/en-us/KB/929833

  System File Checker is a Windows utility that allows users to find corruptions in Windows system files and restore the damaged files.

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• My downloads keep getting interrupted even of the Microsoft site when you try to download Windows 7 upgrade advisor.

  My downloads keep getting interrupted even of the Microsoft site when you try to download windows 7 upgrade advisor.

  Am running vista with IE9 on laptop Fujitsu Siemens Esprimo Mobile

  Any suggestions please?

  Hello Rogerpipe

  Try to disable your temporary security software and try to download the tool Upgrade Advisor. If this does not work then put the system in a clean boot and see if the problem still occurs.
  Steps to perform a clean boot.
  http://support.Microsoft.com/kb/331796

• Get the error message when you try to launch the 64-bit CC bridge.

  Get the error message when you try to launch Bridge from Photoshop CC 64 bit.  "Cannot complete order because the extension cannot be loaded."  Need of difficulty.  Thank you.

  Hey Adobe Bubba,

  Please uninstall the software, run the cleanup tool, reboot your machine and install again.

  Cleaning tool: http://www.adobe.com/support/contact/cscleanertool.html .

  Kind regards

  Romt Sinha

• I get an error 80070643 when you try to do an update. __

  I get an error 80070643 when you try to do an update. Using Windows 7 Pro. The updates seem to be security patches. Any ideas?

  Hello

  Windows Update error 80070643 can happen for several reasons. The most common cause is a problem with the .NET Framework is installed on the computer. You can also encounter this error when installing updates for Microsoft Office 2003. If you were installing Microsoft Office 2003 updates when you received the error, follow the instructions in the "Microsoft Office 2003" section below. Otherwise, follow the instructions in the "Windows.NET Framework" section in the article below:
  Windows Update error 80070643
  http://Windows.Microsoft.com/en-us/Windows7/Windows-Update-error-80070643

  Also see the article below:
  You receive the error 0 x 643, error code 0 x 80070643 or updates may be offered again when you try to install the .NET Framework updates when you use Windows Update or Microsoft Updates
  http://support.Microsoft.com/kb/976982

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Error code: 80070424 when you try to use Microsoft Update

  I get an error code 80070424 when you try to use microsoft update, and I can't use the fix it Center, or what I can do... It's on windows xp

  I get an error code 80070424 when you try to use microsoft update, and I can't use the fix it Center, or what I can do... It's on windows xp

  If you believe that you have done this with the same applications or applications, follow the instructions in the order, exactly...

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find. Reboot when necessary. (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner.

  Cleaning the components of update on your Windows XP computer

  It is a good idea at this time to ensure that you continue to get the updates you need. This will help you ensure that your system update is ready to do it for you.

  Download and run the MSRT tool manually:
  http://www.Microsoft.com/security/malwareremove/default.mspx
  (Ignore the details and download the tool to download and save to your desktop, run it.)

  Reset.

  Download/install the latest program Windows installation (for your operating system):
  (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
  (Download and save it to your desktop, run it.)

  Reset.

  and...

  Download the latest version of Windows Update (x 86) agent here:
  http://go.Microsoft.com/fwlink/?LinkId=91237
  ... and save it to the root of your C:\ drive. After you register on theroot of the C:\ drive, follow these steps:

  Close all Internet Explorer Windows and other applications.

  AutoScan--> RUN and type:
  %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
  --> Click OK.

  (If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

  Reset.

  Now reset your Windows with this FixIt components update (you'll use the aggressive version - if requested):
  How to reset the Windows Update components?

  Reset.

  The less you have to run all the time, most things you want to run will perform:

  Use Autoruns to understand this all starts when your computer's / when you log in. Look for whatever it is you do not know usingGoogle (or ask here.) You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

  You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory. This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

  Do a house cleaning and the dust of this hard drive:

  You can free up disk space (will also help get rid of the things that you do not use) through the following steps:

  Windows XP should take between 4.5 and 20 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.

  If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
  http://www3.TELUS.NET/dandemar/spack.htm
  (Especially of interest here - #4)
  (Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )

  You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning

  How to use disk cleanup
  http://support.Microsoft.com/kb/310312

  You can disable hibernation if it is enabled and you do not...

  When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:

  -Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
  -Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
  -Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.

  You can control the amount of space your system restore can use...

  1. Click Start, right click my computer and then click Properties.
  2. click on the System Restore tab.
  3. highlight one of your readers (or C: If you only) and click on the button "settings".
  4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
  5. click on OK. Then click OK again.

  You can control the amount of space used may or may not temporary Internet files...

  Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...

  -Open a copy of Microsoft Internet Explorer.
  -Select TOOLS - Internet Options.
  -On the general tab in the section 'Temporary Internet files', follow these steps:
  -Click on 'Delete the Cookies' (click OK)
  -Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
  -Click OK.
  -Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
  -Once it's done, click OK, close Internet Explorer, open Internet Explorer.

  You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:

  CCleaner (free!)
  http://www.CCleaner.com/
  (just disk cleanup - do not play with the part of the registry for the moment)

  Other ways to free up space...

  SequoiaView
  http://www.win.Tue.nl/SequoiaView/

  JDiskReport
  http://www.jgoodies.com/freeware/JDiskReport/

  Those who can help you discover visually where all space is used. Then, you can determine what to do.

  After that - you want to check any physical errors and fix everything for efficient access"

  CHKDSK
  How to scan your disks for errors* will take time and a reboot.

  Defragment
  How to defragment your hard drives* will take time

  Now that your system is generally free of malicious software (assuming you have an AntiVirus application), you've cleaned the "additional applications" that could be running and picking up your precious memory and the processor, you have authorized out of valuable and makes disk space as there are no problems with the drive itself and your Windows Update components are updates and should work fine - it is only only one other thing youpouvez wish to make:

  Get and install the hardware device last drivers for your system hardware/system manufacturers support and/or download web site.

  If you want, come back and let us know a bit more information on your system - particularly the brand / model of the system, you have - and maybe someone here can guide you to the place s x of law to this end. This isn't 100% necessary - but I'd be willing to bet that you would gain some performance and features in making this part.

• I get error Code C80003F9 when I try to install my updates

  I get error Code C80003F9 when I try to install my updates

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates>

  Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2

  http://support.Microsoft.com/kb/947821/en-us>

  Reset Windows Update components.

  http://go.Microsoft.com/?linkid=9665683>

  This tool automates the most common fixes problems with the Windows Update site.

  Note this fix it Solution has two modes by default and aggressive.

  You must run the fix it solution in default mode and determine if it solves your problem with Windows Update before running it in aggressive mode.

  The historical section Update http://windowsupdate.microsoft.com> will be white/empty after you run the Fix It in AGGRESSIVE mode.

  This will not effect either by using the Windows Update Web site or via automatic updates update.

  UTC/GMT is 01:20 on Tuesday, may 8, 2012

• I'm trying to download 11 items that I already have on a new computor windows 8.1 after downloadind the first file and the extraction I get the error message when I try to download the second file: the party reach the components file is missing

  I'm trying to download 11 items that I already have on a new computor windows 8.1 after downloadind the first file and the extraction I get the error message when I try to download the second file: the party reach the components file is missing

  Make sure you have both. (1 of 2) file .7z and .exe file (2 of 2) under the same folder files

  Then double-click on the .exe file (2 of 2) it will start the installation process.