Get the error code 80070020 for update security update for Windows Vista (KB2588516)

Similar Questions

• What does the error code 80080005 when update of Windows Vista?

  Just installed a new hard drive and the need to run the Windows Vista update, but the error message above is displayed. I did a complete analysis of the Virus and no known viruses have been detected.

  0 X 80080005 CO_E_SERVER_EXEC_FAILURE
  BITS service could not be started

  First of all, make sure that no proxy server is causing this issue.
  Click on the round to start, in the search field type cmd
  Right click on cmd.exe and select "Run as Administrator". Accept the UAC prompt.

  At the prompt, enter the following command exactly as written including spaces and press enter

  netsh winhttp see power of Attorney

  If this message appears, type exit, and then press enter

  Direct access

  If a proxy is listed, then type the following and press enter

  netsh winhttp reset proxy

  Then type in the output, press ENTER to close the command prompt.
  See if the system can update now.

  UTC/GMT is 18:28 Thursday, September 6, 2012

  Jose Antonio Ponton Posada CEO

• I'm unable to load the microsoft KB 2378111 security update. I'm under Vist Home Premium. I get the error code 80070020

  I'm unable to load the microsoft KB 2378111 security update. I'm under Vist Home Premium. I get the error code 80070020. I tried safe mode, but no luck so far

  Hello

  You are supposed to try it in "Safe Mode with network"; not 'Safe Mode'.

  You need a cable connection; no wireless using this method.

  Start method 3, etc at this link if top is not solve:

  "Error 0 x 80070020 when you use the Windows Update Web site or the Microsoft Update Web site to install the updates.

  http://support.Microsoft.com/kb/883825

  {Moderator note: Thread is placed in the appropriate forum}

  See you soon.

• KB2656374 update failed to install and get the error code 80070020

  Try to install update KB2656374 and get the error code 80070020. How can I fix this please?

  Hello

  1. who is the antivirus installed on the computer program?

  2 have you made any changes to the computer before the show?

   
   

  Perform the steps described in the article:

  You receive error 0 x 80070020 when you use the Windows Update Web site or the Microsoft Update Web site to install the updates

  http://support.Microsoft.com/kb/883825

   
  WARNING: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
   

  I hope this helps.

• I get the error code 646 when I try to install windows updates.

  I get the error code 646 when I try to install windows updates. I have Windows Vista Home Premium. I disabled my firewall and I still get the error code 646.

  Hello

  Try this 1st to see if it helps, and it should:

  Description of the Patch registration cleanup tool
  http://support.Microsoft.com/kb/976220/

  ------------------------------------------------------

  If necessary :

  Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
  or the update itself - double click a view more information (or click top then discovers on the right)

  Those who will take you to a page where you can download the update.

  Or go here and the KBxxxxxx number to download it.

  Download Center - mount the KBxxxxxx.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  Download - SAVE - go to where you put them - click on - RUN AS ADMIN

  Then you can right click on the update in the updates Windows and HIDE.

  If you get an error Installer install this version:

  Windows install 4.5 Redistributable
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  ----------------------------------------------------

  Then run this:

  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system for Windows Vista, Windows Server 2008, update tool and
  for Windows 7
  http://support.Microsoft.com/kb/947821

  ------------------------------------------------------------
  Because these are all Office updates you might get more information if necessary in the Agency of those groups that
  may have experienced the same problem.

  Office newsgroups
  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

  Microsoft.public.office.misc discussions
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us

  ------------------------------------------------------------

  If necessary you can incident free get reports however the above should take care of it for you.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• I get the error code 80070020 when trying to install (KB2507618).

  I have Vista Home Premium. I get the error code 80070020 when trying to install (KB2507618).

  I tried all the troubleshooting steps below and still no luck. I installed some other updates, today, August 19, 2011.

  Do I need to KB2507618 that came out in April of this year, or is it is replaced by an other update and or cumulative update?

  • Summary
  • Symptoms of the problem
  • CAUSE
  • Methods to solve the problem
    • Method 1: Restart your computer and install updates
    • Method 2: Start the computer in safe mode with networking support and install updates
      • Windows 2000, Windows XP or Windows Server 2003
      • Windows Vista, Windows Server 2008, or Windows 7
  • Advanced Troubleshooting
    • Method 3: Perform a clean boot of the computer and then install the update
      • Windows 2000, Windows XP or Windows Server 2003
      • Windows Vista, Windows Server 2008, or Windows 7
    • Method 4: Temporarily disable spyware and antivirus software
    • Method 5: Temporarily disable firewalls
      • Disable Windows Firewall in Windows 2000, Windows XP and Windows Server 2003
      • Turn off the firewall in Windows Vista, in Windows Server 2008, or in Windows 7

  Read the little free support in the Article:
  http://support.Microsoft.com/kb/2507618

• My windows update will not install the new version of windows update, I get the error code 80070020 on a 64-bit vista SP2

  My windows update to install a new version of windows update says it acts like it will download and install it then gives me the error code 80070020 and says that my computer is unable to download or install new updates or new version of the windows update. I have a 64-bit windows vista SP2 and my avira antivirus program that has a real-time protection. I tried to do a clean boot upward and tried every possible tip I found on the Microsoft and through suggested methods help panel, I found. My computer has Avira Antivirus that has real time protection I deleted and tried without that somewhere because he said it could be antivirus programs that include real-time protection. Does anyone have advice good?

  Hello

  1. What are the troubleshooting steps correct you did to fix the problem?

  2 did you a recent software or changes to the material on the computer?

  I would say allowing you to run the FIXIT from the link provided and check if it helps.

  You receive error 0 x 80070020 when you use the Windows Update Web site or the Microsoft Update Web site to install the updates

  http://support.Microsoft.com/kb/883825

  You can also try the manual steps and check.

  If you follow the manual steps to start the computer in a clean boot state, remember to start the computer in normal mode after you have completed troubleshooting.

  Note: when you are finished troubleshooting, follow step 7, mentioned in the article to start the computer to a normal startup.

  Note: It is possible that some data could be removed if infections are detected.

  Hope this helps and keep us posted.

• I get the error code 80070020 when installing windows updates and also my computer crashes a lot. How to fix?

  I'm unable to install all the updates of windows - getting error code 80070020.  Have tried the suggested steps and they didn't work.
  Also can't get with my computer freeze.

  Did you just listed:

  You receive error 0 x 80070020 when you use the Windows Update Web site or the Microsoft Update Web site to install the updates
  http://support.Microsoft.com/kb/883825

• I also get the error code 80070005 when you try to use Windows Update to check for the updates

  I get this error code as soon as I try to check updates. It does not even say there are updates tells me to enable updates, but when I try it gives the code. I used Microsoft Fix and now it says everything is fixed and ok but it is not. So now what?

  Hello

  1. what Microsoft fixit did you run?
  2. don't you make changes to the computer before the show?

  I suggest you try the steps from the following link:

  Error: 0x80070005 when you try to install updates by using Microsoft Update or Windows Update
  http://support.Microsoft.com/kb/968003

  Note: When you perform a virus scan Malware, you will lose data that are affected by the virus. Microsoft is not responsible for the loss of this data.

• I get the error code 2908 when I try to install Windows 7 Premium update for mVista

  Setup has encountered an unexpected error installing this package.  This may indicate a problem with this package.  The error code is 2908.

  While waiting for a response I waas able to install Windows 7.  Thank you.

• Error code 646 for Windows Vista

  When I try to install these updates, I get an error code 646.  I have a laptop Dell Inspiron 1501 with Windows Vista.

  Update of security for the viewer Microsoft Office Visio 2007 (KB973709)

  Download size: 2.5 MB

  You may have to restart your computer for this update is taken into account.

  Update type: Important

  A vulnerability of security in Microsoft Office Visio Viewer 2007 could allow arbitrary code to run when a malicious web page that is updated it is open. This update resolves this vulnerability.

  More information:
  http://support.Microsoft.com/kb/973709

  Help and Support:
  http://support.Microsoft.com/?ln=en-us

  Update of security for Microsoft Office System 2007 (KB972581)

  Download size: 1.0 MB

  You may have to restart your computer for this update is taken into account.

  Update type: Important

  A 2007 Microsoft Office System security vulnerability could allow arbitrary code to run when opening a file modified for malicious purposes. This update resolves the vulnerability so that the 2007 Microsoft Office System documents are managed appropriately.

  More information:
  http://support.Microsoft.com/kb/972581

  Help and Support:
  http://support.Microsoft.com/?ln=en-us

  Update of security for Microsoft Office System 2007 (KB974234)

  Download size: 525 KB

  You may have to restart your computer for this update is taken into account.

  Update type: Important

  This update resolves a problem that can cause programs that use Outlook view with Forms 2.0 control, such as Microsoft Office Outlook with Business Contact Manager, stop functioning as expected after installation of update of security for Microsoft Office Outlook 2007 (KB972363).

  More information:
  http://support.Microsoft.com/kb/974234

  Help and Support:
  http://support.Microsoft.com/?ln=en-us

  OK... I had the same problem with the download of the 2007 Microsoft security updates. When I tried to install updates, I receive error 646. I finally solved my problem by going to the Download Center on Microsoft and I install manually.

  Here are the steps that I took... which I think should work:

  (1) go to the Microsoft Download Center: http://www.microsoft.com/downloads/en/default.aspx
  (2) look for each update code that begins with the letters "KB" and followed by a set of numbers (i.e. KB974234)
  3) click on the link for the download and then click on download and run. I think you have to accept an agreement, then click on continue or OK
  4) repeat for all downloads that you can not install
  (5) run Microsoft Update new and click search the updates and if updates have been installed successfully, they should no longer appear in the updates that must be installed.

  I don't know if it is not relevant or if it helped me succeed to install updates manually, but before I manually installed my updates I followed the instructions David_O posted here http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/f3390e74-9961-4aae-8a05-554c1a9cf1a2 . I suggest that first of all try to download manually by following my directions. If it does not, then it's a possibility instructions of David resolved an issue that allowed me to download them manually disable Microsoft downloads site.

  I can't believe all the research and the suggestions of the technicians did not work... sometimes your own research is the best!

  I hope this helps! Good luck!

• where can I get the service pack 1 for windows Vista Home Basic. My media windows palyer will not play DVD with it. I can not get a decoder installed without the service pack. Please help__

  Where can I obtain service pack 1 for windows Vista Home Basic

  Where can I obtain service pack 1 for windows Vista Home Basic

  Hey electric7422

  Click Start then right click on computer

  then left click on properties

  It will tell you if you have a 32-bit version or 64-bit vista

  links below have downloads the standalone vista service Pack 1 for each bit version

  the 32-bit version

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=b0c7136d-5ebb-413b-89c9-cb3d06d12674&displaylang=en

  the 64-bit version

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=874a414b-32b2-41CC-bd8b-d71eda5ec07c&displaylang=en

  Walter, the time zone traveller

• When i proform windows update on the "update for Windows Vista (KB972145)' I get the error code: 80070020 __what I can do to fix this? ____

  I did everything here
  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/407b76bc-2BBA-42d4-9e9d-34dab373979c

  Error 0 x 80070020 when you use the Windows Update Web site or the Microsoft Update Web site to install updates:
  http://support.Microsoft.com/kb/883825

  Quote your full version of Windows (for example, Vista SP1;) Vista 64 - bit SP2) when you post in a forum or a newsgroup. Please do it in your next reply.

  What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

  A (another) Norton or McAfee application has already been installed on the computer (for example, a free trial version which is preinstalled when you bought it)?

  Have you met either of the two scenarios described in the Symptoms section of http://support.microsoft.com/kb/972145?

  Have you tried to install the update manually by using the link in KB972145 to download the installation program?

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Get the error code 0x8007F0F4 to update security for Windows XP (KB2481109). OS is XP version 2002 SP3

  Have got this code failure twice with automatic updates and got the same error code when I did an update of the manual. Anyone know the reason for this error code for this security update?

  Hello
  You can try the steps in the following article and check if it works:
  You may receive a "0x8007F0F4" error code when you try to install the updates on the Windows Update Web site or from Microsoft
  http://support.Microsoft.com/kb/958051
   
  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  322756 (http://support.microsoft.com/kb/322756/) how to back up and restore the registry in Windows
  Let us know if it helps!

• I tried twice to install the KB2754670 update every time install failed with the error code 646 can help? I have Windows Vista Home Premium edition

  Update Windows cannot install KB2754670 twice showed error code 646. Can someone help? I am running Windows Vista Home Premium edition.

  Gives it a try and see if it solves the problem....

  http://support.Microsoft.com/kb/2258121>

  UTC/GMT is 01:26 Sunday, October 21, 2012