Get the error code 80070641
I tried the patches recommended for the error code 80070641, but it has not solved the problem.
Hi MFeightner,
Apart from questions of Jose, you can also take a look at the thread similar here with a possible fix for your problem.
I hope this helps!
Tags: Windows
Similar Questions
-
I can't install the update to windows KB2680317 update for Microsoft Works 9. I get the error code 80070641, not 646. I tried Microsoft fixit and still no installation. Any ideas out there?
Hello
I would suggest trying the following methods and check if it helps.
Method 1:
Put the computer in a clean boot state, and then try to install the updates and check if it works.
How to troubleshoot a problem by performing a boot in Windows Vista or Windows 7:
http://support.Microsoft.com/kb/929135
Note: once you have completed troubleshooting, try the procedure described in step 7 to reset the computer to start as usual.
Method 2:
Try the steps in the Microsoft article and check below if the problem persists.
The problems with the installation of the updates:
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates
Method 3:
Try to download updates from the Microsoft Downloads Web site and check.
http://www.Microsoft.com/download/en/default.aspx
And also to try the steps in the following Microsoft article.
http://support.Microsoft.com/kb/818018/en-us
Hope the information is useful.
-
Im trying to install the following updates KB2598039 / KB2680317 / KB2596672 / KB2687267. I tried to install them individually or as a group and got the same error I disabled the windows installation program and got the same error also.
OS: Windows Vista 64MIcrosoft Office: 2007Hello!
Try these methodsgo to start > run > cmd and type enter after each commandnet stop wuauservCD %SystemRoot%\System32Ren C:\Windows\SoftwareDistribution SoftwareDistribution.oldNet start wuauservthen try again to install updatesIf the question above did not workTry this link:I found useful for this kind of scenario,Thank youMakoi -
When you drag the file on the external drive I get the error code-43? What it means? How to fix? Thank you!
Restart the computer and try again.
-
get the error code 1429 (I can't restore my shuffle gen 4)
I can't restore my shuffle gen 4 (I get the error code 1429)
Suffle stopped mid-song and don't retart
A Reset (reboot) for a shuffle is to set the switch OFF for at least 10 seconds.
If you are able to start a restore through iTunes, which must mean that the shuffle still appears in iTunes when connected. It is the Apple document with tips for this error.
If this does not help, please report back.
-
In Safari, I get the error code BSOD 0 X 80060402, error code Windows defender in the available boot device. He told me to contact Microsoft certified technicians. I do not use Microsoft or windows.
You have utilities installed on the computer antivirus, cleanup, or other third party maintenance?
-
I get the error code when you try to download updates
If the updates in question are updates of security for Office, see - error 646 when installing updates
Please note a Fixit available here if these updates are updated Office -code error '0 x 80070646', '646', or '1606' when you try to install the Office updatesIf the updates in question are not for the office, so please read this and post back to this topic with the requested information so that someone peut help -.
What information to post in the Windows Update forumExpert MowGreen Windows IT Pro - consumer safety
-
I get the error code 646 when I try to install windows updates.
I get the error code 646 when I try to install windows updates. I have Windows Vista Home Premium. I disabled my firewall and I still get the error code 646.
Hello
Try this 1st to see if it helps, and it should:
Description of the Patch registration cleanup tool
http://support.Microsoft.com/kb/976220/------------------------------------------------------
If necessary :
Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
or the update itself - double click a view more information (or click top then discovers on the right)Those who will take you to a page where you can download the update.
Or go here and the KBxxxxxx number to download it.
Download Center - mount the KBxxxxxx.
Microsoft Download Center
http://www.Microsoft.com/downloads/en/default.aspxDownload - SAVE - go to where you put them - click on - RUN AS ADMIN
Then you can right click on the update in the updates Windows and HIDE.
If you get an error Installer install this version:
Windows install 4.5 Redistributable
http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en----------------------------------------------------
Then run this:
How to reset the Windows Update components? -a Mr Fixit
http://support.Microsoft.com/kb/971058Description of the system for Windows Vista, Windows Server 2008, update tool and
for Windows 7
http://support.Microsoft.com/kb/947821------------------------------------------------------------
Because these are all Office updates you might get more information if necessary in the Agency of those groups that
may have experienced the same problem.Office newsgroups
http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspxMicrosoft.public.office.misc discussions
http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us------------------------------------------------------------
If necessary you can incident free get reports however the above should take care of it for you.
Windows updates - free Incident report
Go here and click on-> Windows Update fails while searching, downloading or installation of updates
http://support.Microsoft.com/GP/wusupport#tab3The security updates, you can get free support Incident report
http://www.Microsoft.com/protect/resources/support.aspxI hope this helps.
Rob - bicycle - Mark Twain said it is good. -
Windows Vista Service Pack 2 (KB948465) I get the error code 80092004 and it was not able to load.
Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been extended until February 26, 2010. Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge. Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack). ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
Setup KB967044 error; I get the error code 646 in automatic and manual update update fails so
I tried to install KB967044 for Microsoft Works 9. Like others, I get the error code 646 for the automatic update. I tried to manually install, but installation requires the CD of Microsoft Works. Now, Works has been installed at the factory, and I do not think that the CD that came with the computer. In any case, I was unable to find such a CD. Disable my firewall has not changed the problem. I use Vista.
Thank you for your help.Contact the manufacturer of your PC to get the drives concerned etc..
If the update requires the CD and then the CD. TaurArian [MVP] 2005-2010 - Update Services
-
I tried to install Windows Vista SP1 since July without success. I stopped trying in October but just tried it once more and I get the error code 8024200d message when it fails to install.
See this previous thread on the problem: http://www.google.com/search?hl=en&safe=off&rls=com.microsoft: en - US & q = + site: social.technet.microsoft.com + 8024200d & ei = hkchS4O6M9HolAfh8viLCg & a = X & oi = forum_cluster & resnum = 1 & ct = more results, & ved = 0CA0QrQIwAA
Unlimited installation and compatibility for Vista SP1 support is available free of charge from April 2008, through June 30, 2009. This support now will cost $59 us $ (or more) per incident.
Good luck!
~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
Just installed Windows 7. Windows udate watch 21 important security updates but they will install. I get the error code 80070539. Tried to install updates by shutting down the computer, but the computer stops until they install.
Hello Tallydupp, welcome.
Do you by chance have Google Desktop? Some users have reported interference problems in Winodws 7 while using an older version of Google Desktop.
Try to uninstall it if it exists.Let us know what happens
Thank you! Ryan Thieman
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
Ideas: I'm trying to download the updates to my computer, but can't. I get the error code 646 and the download fails. I tried to download the update several times, but get the same answer. What is the problem?
- Pragrams you have problems with
- Error messages
- Recent changes to your computer
- What you have already tried to solve the problem
Remember - this is a public forum so never post private information such as numbers of mail or telephone!
Hello
Try this 1st to see if it helps, and it should:
Description of the Patch registration cleanup tool
http://support.Microsoft.com/kb/976220/------------------------------------------------------
If necessary :
Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
or the update itself - double click a view more information (or click top then discovers on the right)Those who will take you to a page where you can download the update.
Or go here and the KBxxxxxx number to download it.
Download Center - mount the KBxxxxxx.
Microsoft Download Center
http://www.Microsoft.com/downloads/en/default.aspxDownload - SAVE - go to where you put them - click on - RUN AS ADMIN
Then you can right click on the update in the updates Windows and HIDE.
If you get an error Installer install this version:
Windows install 4.5 Redistributable
http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en----------------------------------------------------
Then run this:
How to reset the Windows Update components? -a Mr Fixit
http://support.Microsoft.com/kb/971058Description of the system for Windows Vista, Windows Server 2008, update tool and
for Windows 7
http://support.Microsoft.com/kb/947821------------------------------------------------------------
Because these are all Office updates you might get more information if necessary in the Agency of those groups that
may have experienced the same problem.Office newsgroups
http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspxMicrosoft.public.office.misc discussions
http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us------------------------------------------------------------
If necessary you can incident free get reports however the above should take care of it for you.
Windows updates - free Incident report
Go here and click on-> Windows Update fails while searching, downloading or installation of updates
http://support.Microsoft.com/GP/wusupport#tab3The security updates, you can get free support Incident report
http://www.Microsoft.com/protect/resources/support.aspxI hope this helps.
Rob - bicycle - Mark Twain said it is good. -
Windows Update fails to install KB974234 and returns the error code 80070641
Previous issues with the installation of the updates or with those who just do not had are released on 11/10, but cannot install KB974234 (published on 10/13). Update returns the error code 80070641.
I am running Vista Home Premium with Office 2007 SP2. Diagnostics Office finds no problem.
Following further discussions, I have (among other attempts): stopped the Service Windows Installer (returns this message "the Windows Installer service is not started"), tried the Patch Registration Cleanup Tool (wouldn't not - said "a productcode must be determined"), downloaded manually updated.
Any help would be appreciated!
DaveHi Dave,http://support.microsoft.com/default.aspx/kb/818018/
http://support.Microsoft.com/kb/304498
Hope this can solve your problems,
-
I get the error code (C0000005)
I get the error code when you try to install SQL Server 2005 SP3 (KB970892), please help.
Try to publish here:
The SQL Server installation & set program at level
http://social.msdn.Microsoft.com/forums/en-us/sqlsetupandupgrade/threads/ TaurArian [MVP] 2005-2010 - Update Services
Maybe you are looking for
-
How can I move right sidebar in preview?
on my imac (old) previous of this sidebar on the right - now it's on the left, on el capitan. is it possible to change your mind?
-
I have a Mac 10.4 and I tried to re - install foxfire with no luck.
-
I keep crashing, canoe get e-mail or internet to stay on, it crashes
I keep crashing, canoe get internet to stay on or by e-mail with it crashing, why it please
-
Dell V305 printer hangs up when printing
I followed old/other information about this issue. I had NO problem until the last 2 weeks after using this printer for 2-3 years. I deleted all THE old drivers, etc. downloaded the drivers from Dell (2 different times). Each time, the printer will p
-
Confused about the notion of VLAN
I'm confused about the VLAN. I thought that the notion of VLAN was this computer on different VLANS were not suppose to be able to communicate with each other. I am setting up a 6248 and for me to get DHCP to work, I need to enable ip Routing. When I