When I boot foxfire there is a message that foxfire is already open. Even after re-booting my computer, I still get the same message.

Similar Questions

• When opening 2014 CC PS I get the message "the program cannot strt because ONCoreFoundation8.dll is missing on your computer. Try reinstalling the program to fix this problem.  I did and still get the same message.

  When opening 2014 CC PS I get message "the program can't start because ONCoreFoundation8.dll is missing on your computer. Try reinstalling the program to fix this problem.  I did and still get the same message.

  I have no errors during the installation process.   I have now gone PS cc, copied all the files with ONCore - and paste in the location of the same file in 2014 CC PS.  There is now no error report when I run CC2014 PS and everything seems to work properly.

  I'm still not sure why Adobe has PSCC2014 rather than an update on PS CC.

• Error codes: Code 80070005, I cannot update Windows... I used the Unility FixCleaner but I still get the same error message. How cal I solve this problem?

  Error codes: Code 80070005, I cannot update Windows... I used the Unility FixCleaner but I still get the same error message. How can I fix?

  http://social.technet.Microsoft.com/forums/en/itprovistasetup/thread/95edbee4-a75c-48AD-91D1-5316a96f9567

  http://www.microsoft.com/communities/newsgroups/en-us/default.aspx?dg=microsoft.public.windowsupdate&tid=1ab369b4-7d27-4951-8047-09c861ff5bc1&cat=en_US_d02fc761-3f6b-402c-82f6-ba1a8875c1a7&lang=en&cr=&sloc=en-us&m=1&p=1

  See if the information above solves the problem.

  If this is not the case, try the Windows Update Forum, the link below:

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• When I try to add presets to light room it is said that room light stopped working and stops, I tried unloading and reloading to get the same thing.what can I do? Thank you

  When I try to add presets to light room it is said that room light stopped working and stops, I tried unloading and reloading to get the same thing.what can I do? Thank you

  Please close Lightroom and then go to the following location in the Explorer: C:\Users\UserName\AppData\Roaming\Adobe\Lightroom\Develop Presets\User Presets

  Paste the predefined settings file in the location above, then try to open Lightroom and control the Module Development, if you are able to display Presets or not.

• Tent for 3 days of bridge to work. I was told it could read cache - tired everything including deleting and reloading - still getting the same message. PL; help ease that I am on a deadline. Bob

  Cannot read the bridge cache

  Tent for 3 days of bridge to work. I was told it could read cache - tired everything including deleting and reloading - still getting the same message. Computer restarted several times as well. Please help me I'm on a deadline. Bob

  Let me guess: you're under Windows?

  Have you tried a different cache folder location? Because Windows can limit the bridge to access the folder that you have now.

• I'm trying to complete my FAFSA, and the site said I had no upgragded in my browser version, I downloaded the latest version of Firefox, and I still get the same message.

  FAFSA is the form to fill out for financial aid for College. I need to fill out the form later for the spring semester of next year. Until I'm able to fill it in online and save and send to school. When I'm on the site and click on fill out a form, a message came that I didn't have the right version of my browser, so I downloaded the latest version of Firefox, and then restarted the computer and is returned to the site to try again and got the same message. Then I had two shortcut icons on my desktop and I can't say that one is for the latest version of Firefox.
  When you download the latest version, it removes the last version that you had previously downloaded?

  Fafsa.gov site can't stand no more recent than the version of Firefox 3.6.x. It's their choice.

  • FAFSA browser requirements: http://www.fafsa.ed.gov/fotw1112/help/beforebrowser_req.htm

  You can install the version of Firefox Portable for use only on this site and use your current version of Firefox for all the rest. Firefox Portable is not produced by Mozilla (but it is based on the versions of Firefox released) and only is not supported on this site - has its own support forum (see below). Firefox Portable installs in a separate folder on your hard disk so that it does not interfere with your currently installed version configuration Firefox or personal information (bookmarks, passwords, etc.). You can also install Firefox Portable on a USB/thumb/pin/jump drive.

  • General information of Firefox Portable: http://portableapps.com/apps/internet/firefox_portable
  • Firefox Portable 3.6.24 download links: http://portableapps.com/apps/internet/firefox_portable/localization#legacy36
  • Firefox Portable user forum: http://portableapps.com/forums/support/firefox_portable

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

  Not related to your question, but...

  You may need to update some plug-ins. Check your plug-ins and update if necessary:

  • Plugin check-> http://www.mozilla.org/en-US/plugincheck/
  • Adobe Shockwave for Director Netscape plug-in: install (or update) the Shockwave with Firefox plugin
  • Adobe PDF plugin for Firefox and Netscape: Installation/update Adobe Reader in Firefox
  • Shockwave Flash (Adobe Flash or Flash): updated Flash in Firefox
  • Next-generation Java plug-in for the Mozilla browser: install or update Java in Firefox

• My iPod classic worked well yesterday, and now iTunes says that it was damaged. I restored it as suggested and now there is no music on my iPod, and I still get the same message "corrupted".

  I've had my iPod for three years with no problems connected to a MacBook Pro. I'm so sad to see it working-I love this thing! Any help is appreciated!

  Try to put the iPod in Disk Mode

  Put the iPod in disk - Apple Support Mode

  Launch iTunes and connect the iPod.  If iTunes picks it up, he may ask you to do a restore with a message on the "recovery."  Tell iTunes to perform the restore.  See if making the restoration of this way makes a difference.

• When I start my laptop, it is said that updates are installed. A few minutes later, my laptop restarts, and again the same message. then restarts again and again. I can not connect. What should I do?

  I have no floppy drive installation or recovery CD. When it restarts, updates are always 0% complete. I tried the system restore, but it just says that his race, but the problem remains. When I try to go to safe mode, the problem persists and I can not log on because it restarts.

  Hi SusanaVelazquez,

  Follow the suggestions below for a possible solution:

  Method 1: I suggest you run Start up repair using WINRE (Windows recovery environment). To start WINRE and run Startup Repair on your system follow the article below:

  Startup Repair: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

   

  Method 2: You can also try to run the restore from WINRE (Windows Recovery Environment) system.

  If you want to restore the system to WINRE (Windows Recovery Environment) start WINRE and then select System Restore.

  You can also refer to the article provided below for more information on the options of WINRE (Windows Recovery Environment) in Windows Vista:

   

  What are the system recovery options in Windows Vista?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  It will be useful. Please let us know to get help.

• I get the bsod with the error of the kernel data inpage error.i seem to get more when im doing a virus scan so I changed my anti-virus software, but I still get the same error.

  I tried a system restore, but that did not work.im using a computer hp laptop with a 2.0core 2 duo on vista Home premium with 2 GB of ram.

  Hello

  It is possible that these are false positives, but I didn't.

  Have you run Malwarebytes, MRT, and UnHackMe gives you all the options? Can you do that in Mode safe?
  Can you get online in Mode safe mode with networking and try online Scans? No tool for a deletion will probably be
  Download them all. You can also try SpyBot and SuperAntiSpyware. There are also other tools on the RootKit
  You can use the list.

  Below must be carried out if necessary AFTER all others above have been tried.

  SpyBot - free
  http://www.safer-networking.org/en/index.html

  If you keep SpyBot you will need to set the SDSB Service Manual and STOPPED and do not use TeaTimer-
  or you can scan with it and then uninstall it.

  SuperAntiSpyware - free
  http://www.SUPERAntiSpyware.com/

  Even here - he has a resident part that can cause some problems so either stop those or uninstall after scanning.

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Try to play videos says I need to update Adobe 11, but after installing it, still get the same message

  To run all the videos, it says I must upgrade to Adobe 11 something. It runs successfully, says I have it, so any video window opens by saying that I have to install update Adobe that I had just done. When I run the updates in Adobe it tells me no are availible and lists me to an Adobe 10 something. I am frustrated beyond now. Cluless as to what I should do. Thanks a lot for any assistance. I'm not that tech savvy but can follow directions detailed most of the time.

  Original title: really need help with an update of Adobe. I'm in a 'ring' with zero results of headbanging. Need direction, help!

  Try this.  Go to http://www.download.com and download Real player and Winamp.  These two are free and play videos.

  Good luck.

• When I try to copy files to a CD, I get message "Windows has a problem to copy this file to a CD." How to fix? I get the same message that I click on "Copy to CD" or drag the file to copy to the CD player.

  When I try to copy files to a CD, I get the message "Windows has encountered a problem when trying to copy this file."  I press the button "Retry" without any result.  I get the same message that I have click on 'Copy' files on a CD or drag the files to copy to the CD player.  I was able to copy these same files to a CD a few days ago.  Thanks for the suggestions.

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hello

  1. don't you get an error code along with this error message?
  2. what CD burning software is installed on your computer?
  3. what kind of CD do you use to burn?
  4. What is the status of the CD - DVD drive in Device Manager?

  Method 1.
  Let us first check the status of the optical drive in the Device Manager. Check if there is no error code or yellow mark is listed.
  Reference:
  Explanation of error codes generated by Device Manager in Windows XP Professional
  http://support.Microsoft.com/kb/310123

  Method 2.
  If the problem is to start the computer in a clean boot state and check if you are able to accomplish this task.
  Reference:
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353/en-us
  Note: When you are finished troubleshooting, follow the steps as explained in the article to reset the computer to start as usual.

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• When my DVD drive would not work, I bought an external. I get the same message when I go into properties. Pilots have been disabled.

  When my DVD drive would not work, I bought an external. I get the same message when I go into properties. Pilots have been disabled.

  Hello

  Check with the manufacturer of the system, their online documentation and drivers, diagnostics, and
  Ask problems known in their forums. You may also check those similar
  resources on the site of the manufacturer of the actual device (for the original drive).

  =================================================================

  It is not surprising that the same issue affects the old and the new drive.

  This problem may be caused by the presence of too many CD/DVD programs competing for resources,
  especially by these programs that run at startup.

  Even if the error is not Code 22 check these:

  Code 22
  http://TechNet.Microsoft.com/en-us/library/cc731267 (v = ws.10) .aspx

  How to fix the Code 22 errors
  http://pcsupport.about.com/od/errorc/a/code-22-error.htm

  How to enable a device in Device Manager in Windows Vista
  http://pcsupport.about.com/od/windowsvista/HT/enabledevvista.htm

  If necessary:

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

   

• When I boot my xp pro, I get "ntldr is missing, press control, alt, delete".

  When I boot my xp pro, I get "ntldr is missing, press control, alt, delete" I have 3 hard drives, and it's the same for everyone. I put in a cd of xp slipstream and changed the boot order so it starts on the cd. It's the only way it will start to my office. Without the cd, I get the error message. I tried to restore the files ntldr and ntdetect from the slipstream xp cd, but still not the same error. Thanks for any help.

  I tried your suggestion when I realized that I had an external USB disk back to home. I unplugged the drive and XP then started normally. Hard to believe it was simple. I didn't even know the boot sequence to check the USB keys. This is one I will not forget. Also composed a floppy such BACK suggested for any future problems. Thank you. You people are great. I really appreciate your help. It's nice to have my computer back once again!

  All the best,

  Larry

• I got lightroom 6 is installed on my laptop. He beat and went to repair. When it is returned when I tried to use lightroom, it said that I had already installed on two computers. I have uninstall lightroom 6 on my laptop, but when I reinstalled the messag

  I got lightroom 6 is installed on my laptop. He beat and went to repair. When it is returned when I tried to use lightroom, it said that I had already installed on two computers. I have uninstall lightroom 6 on my laptop but when I reinstalled the message that I have two computers is still there. I need help. I don't understand what is happening because it's the same laptop that I installed in the first place. Help, please.

  If she had a major equipment change (as a replacement of hd), it resembles another computer.

  Contact adobe during the time pst support by clicking here and, when available, click on "still need help", https://helpx.adobe.com/contact.html , and request activation reset account.

• I paid for CC (photography) and yet I still get the message that I'm in the 'trial period' when I open Photoshop. How can I fix it?

  I paid for CC (photography) and yet I still get the message that I'm in the 'trial period' when I open Photoshop. Please tell us what should I do to solve this problem.

  Hi Raoul,.

  In addition to the steps above, you also follow instructions on the link below.

  Applications creative Cloud back in test mode after an update until 2015 for CC

  In case you are working on a windows machine and after following the instructions above, you still encounter the same problem, can you please review the instructions below.

  1. Restart the computer in safe mode with network.
     • Immediately after the computer is turned on or restarts (usually after your computer beep), press F8 at 1-second intervals.
     • After that your computer displays hardware information and performs a memory test, the Advanced Boot Options menu appears.
     • Use the arrow keys to select Safe Mode or Safe Mode with network and press ENTER.
  2. Please sign out and sign back for the creative Cloud Desktop Application and verify that the subscription is not trial showing.
     • Connect and disconnect activate Cloud Creative applications
  3. Restart the computer and check the creative Cloud Desktop Application.

  Hope this will solve your problem.

  Kind regards

  Hervé Khare