Get the error when exporting

Similar Questions

• When you export files, I get the error message: "Export is not possible..." »

  When you export files, I get the error message: "Export is not possible, an internal error has occurred: error Win32 API 2.» The system cannot find the specified file... The photo is indeed exported correctly, the error message is always and must be confirmed by "OK". The old version of LR had the problem, not only again 5.7.1 (5.5 there)

  In the "Post processing" section at bottom of the export dialog box, change the selection labeled "after export" of blank (no chosen selection) in the selection of actual 'doing nothing '.

  See this thread for more details: error after you have completed the export of JPEG

  Mike

• Get the error when you try to manually create a restore point in Vista 32 - Bit - System - Protection of the system control panel. Got the unable to create the specified task

  Get the error when you try to manually create a restore point in Vista 32 - Bit - System - Protection of the system control panel.
  Got the unable to create the specified task

  Hello

  What is the exact error message received when the problem occurs?

  Methood 1:

  Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps in the following link:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833 

  Method 2:

  You can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  I suggest to put the computer in a clean boot state, and check if the problem persists, see the link:
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: See step 7; Reset the computer to start as usual after troubleshooting is performed.

  Method 3:

  You can temporarily disable the security software and check if the problem occurs. Check out the following link to do the same thing:

  http://Windows.Microsoft.com/en-GB/Windows-Vista/disable-antivirus-software

  Warning: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  I hope this helps! Let us know if you need more assistance.

• Get the error when using the UTL_SMTP function in Oracle 11 g

  Hello

  I get the error when executing a trigger e-mail code in oracle 11 g:

  I have following trigger on the temporary table:

  CREATE OR REPLACE TRIGGER temp_temp_message AFTER

  INSERT OR UPDATE ON temp_message FOR EACH LINE

  declare

  Conn UTL_SMTP . CONNECTION ;

  msg VARCHAR2 (2000);

  Start

  Conn := UTL_SMTP . open_connection ( host => '10.250.1.149', port=>25 );

  UTL_SMTP . HELO ( conn, '10.250.1.149');

  UTL_SMTP . mail ( conn, '[email protected]');

  UTL_SMTP . RCPT () conn ' [email protected]');

  msg := "Hello, this is test mail." ;

  UTL_SMTP .data( conn, msg);

  UTL_SMTP . quit smoking ( conn );

  exception when others then

  dbms_output.put_line (sqlerrm);

  raise_application_error (-20000,

  "Failed to send because of the following error messages: ' " || sqlerrm);

  end;

  Insert in temp_message values ()1

  );

  When I insert the record in the table there are given the following error.

  ORA-20000: failed to send messages because of the following error: ORA-24247: access denied by access control (ACL) of network list

  ORA-06512: at the 'APPS '. TEMP_TEMP_MESSAGE', line 14

  ORA-04088: error during execution of trigger ' APPS. TEMP_TEMP_MESSAGE'

  But if I run the next plsql through sqlplus send mail successfully:

  declare

  Conn UTL_SMTP . CONNECTION ;

  MSG VARCHAR2 (2000);

  Start

  Conn := UTL_SMTP . open_connection ( host => '10.250.1.149', port=>25 );

  UTL_SMTP . HELO ( conn, '10.250.1.149');

  UTL_SMTP . mail ( conn, '[email protected]');

  UTL_SMTP . RCPT () conn ' [email protected]');

  msg := "Hello, this is test mail." ;

  UTL_SMTP .data( conn, msg);

  UTL_SMTP . quit smoking ( conn );

  exception when others then

  dbms_output.put_line (sqlerrm);

  raise_application_error (-20000,

  "Failed to send because of the following error messages: ' " || sqlerrm);

  end;

  Thanks in advance.

  Yoann

  To resolve ORA-24247 you must:

  (1) create an acl (if it is not already created)

  (2) add the user privileges using the resources of the network

  (3) to use the ACL to a specific address

  This might be useful

  How to fix an ORA-24247: access denied by access control (ACL) of network list | DB tips

• Get the error when update: Office creative cloud could not be updated. (error code: 2)

  Get the error when update: Office creative cloud could not be updated. (error code: 2).

  I'm on a McBook Pro, OSX 10.9.5 retina.

  How to fix error Code: 2?

  Always the same?

  Follow the procedure below:

  Please follow the steps below:

  1)

  Click on the Finder and search options listed next to icon located Apple in the upper left of the screen and click on the "Go" menu button and select 'utilities '.

  (Applications > Utiliites)

  Look for a CC Adobe and Adobe Application Manager folder under utility window and trash both folders.

  2)

  Click on the link below and download & run the cleaning of Adobe tool:

  Select the option "Adobe Application Manager for Mac OS X 10.6" and then click on "Clean up selected."

  https://helpx.Adobe.com/content/help/en/Creative-Suite/KB/CS5-cleaner-tool-installation-PR oblems/_jcr_content/hand-Sea/accordion_container_1/accordion-nominal/accordion-point-1/agreement I on-item-par/procedure/proc_par/step_3/step_par/download/file.res/AdobeCreativeCloudCleane r Tool.zip

  3) click on the link below and download file Creative Cloud install and use the same to install the creative Cloud Desktop application.

  https://creative.Adobe.com/products/creative-cloud

• Get the error when switching from table

  
  Hi all

  I'm moving my procedure table values but no luck. your help in this regard will be highly appreciated. Thanks in advance.

  I created the following procedure:

  -------------

  CREATE OR REPLACE PROCEDURE send_coll

  IS

  TYPE c_dept_no IS TABLE OF THE dept.deptno%TYPE;

  v_dept_no c_dept_no: = c_dept_no();

  BEGIN

  SELECT DeptNo

  TO COLLECT FEES IN BULK

  IN v_dept_no

  EMP;

  END;

  ------------------------

  Now, I want to spend all the values of v_dept_no to one of my name of the procedure as rec_coll that receives the value of v_dept_no and print the value against v_dept_no. for example:

  When v_dept_no = 10 then print all empno against deptno 10 and so on...

  I think I have to do something like below but no luck so far.

  CREATE OR REPLACE PROCEDURE send_coll

  IS

  TYPE c_dept_no IS TABLE OF THE dept.deptno%TYPE;

  v_dept_no c_dept_no: = c_dept_no();

  BEGIN

  SELECT DeptNo

  TO COLLECT FEES IN BULK

  IN v_dept_no

  EMP;

  I'm looping 1.v_dept_no

  rec_coll (v_dept_no (i)); - call the rec_coll procedure and pass in the value

  end loop;

  end;

  ---------------

  create another procedure that will receive the value for v_dept_no

  ------------

  CREATE OR REPLACE PROCEDURE rec_coll (v_emp_no c_dept_no) - create collection with c_dept_no type

  IS

  BEGIN

  I'm looping 1.v_emp_no.count

  dbms_output.put_line (v_emp_no (i));

  END loop;

  END;

  -----------

  I get the error message to create these procedures and if someone help me so I really appreciate it. Thank you

  Concerning

  Shu

  I would just write a single SELECT statement joining EMP and Dept. If this exercise is University (collections of learning PL/SQL types), then you can do something like that.

  I used a PACKET to this implementation. Again, this is not how things are done in the real world.

  SQL > create or replace package coll_pkg
  2 as
  3 type dept_no_tbl is table of the dept.deptno%type;
  4
  5 procedure rec_coll (p_dept_no in dept_no_tbl);
  6 procedure send_coll;
  7 end;
  8.

  Package created.

  SQL > show err
  No errors.

  SQL > create or replace package body coll_pkg
  2 as
  3 procedure rec_coll (p_dept_no in dept_no_tbl)
  4 is
  5. start
  6 because me in 1.p_dept_no.count
  7 loop
  8 d in)
  9 select empno, ename
  10 of PEM
  11 where deptno = p_dept_no (i)
  12                 )
  loop 13
  14 dbms_output.put_line (p_dept_no (i) |) ':' || j.EmpNo | ':' || j.ename);
  15 end loop;
  16 end loop;
  end 17;
  18
  procedure send_coll 19
  20 is
  21 l_dept_no dept_no_tbl: = dept_no_tbl();
  start at 22
  23 deptno select bulk collect into l_dept_no
  24 of the Department;
  25
  26 rec_coll (l_dept_no);
  27 end;
  28 end;
  29.

  Package body created.

  SQL > show err
  No errors.

  SQL > set serveroutput on
  SQL > exec coll_pkg.send_coll
  10:7782:CLARK
  10:7839:KING
  20:7369:SMITH
  20:7566:JONES
  20:7788:SCOTT
  20:7876:ADAMS
  30:7499:ALLEN
  30:7521:WARD
  30:7654:MARTIN
  30:7698:BLAKE
  30:7844:TURNER

  PL/SQL procedure successfully completed.

  SQL >

• get the error when apex.war is deployed on several managed server

  Hi all

  I sent apex.war on several managed server on server 11g webloigc

  his work on a single server managed not on others and I m having 3 servers managed as it

  http://ipaddress:7003

  http://ipaddress:7004

  http://ipaddress:7005

  and I m having infront of weblogic server that the server apache web http://IPAddress:80 / app_name

  I m getting this error when I'm trying to access the application of apex

  The environment can be locked to a single Editor access. ENV_LOCKED: The je.lck file could not be locked. Environment is not valid and must be closed.

  
  

  Please guide me how to configure it on several WLS managed server with the server web apache.
  

  
  

  Thanks and greetings

  Shadab akram khan
  

  solved by myself

• get the error when starting weblogic server in jdeveloper

  get an error when you start weblogic server in jdeveloper

  The NEWSPAPER (its sequel shows):

  < 25 July 2013 19:19:15 IST > < opinion > < WebLogicServer > < BEA-000331 > < started WebLogic Admin Server "DefaultServer" domain "DefaultDomain" running in development Mode >

  < 25 July 2013 19:19:15 IST > < opinion > < WebLogicServer > < BEA-000365 > < Server State has changed in the RACE >

  < 25 July 2013 19:19:15 IST > < opinion > < WebLogicServer > < BEA-000360 > < server started operation >

  The user ' directors [weblogic, directors] =' the role of the administration. All jobs by administrators must go through an Administration Port.

  Authentication failure connecting to the IntegratedWebLogicServer application server. Please check the settings.

  Cannot complete the commissioning of the IntegratedWebLogicServer application server.

  [IntegratedWebLogicServer Instance server stops.  All running applications will be terminated and canceled.]

  [End of forcing of IntegratedWebLogicServer]

  Taskkill /F/PID 1620

  Process is complete.

  PLs help me

  User, please tell us your jdev version!

  Somehow your credentials are corrupted. Two possible solution:

  (1) open your folder, system11.1.1.xxxx open the DefaultDomain\servers\DefaultServer\security folder and edit the boot.properties file. Delete the part '(AES)... ". «"after the username and password and write the new example of username = weblogic", password = "Welcome1" Save the file and try to restart the integrated server. Once the server starts the entries are encoded again.

  (2) If 1) doesn't work, remove all of the DefaultDomain file and create a new instance of WLS in jdev.

  Timo

• Get the error when saving files, afterSave '_afterSave.htm' is not defined

  Recently I updated my Windows Pro 8.1 for Windows 10 operating system, and then I started to work, using Dreamweaver, but all save, example CRL + S I get the error above, anyone else who has this problem and managed?

  Have a look here http://www.dmxzone.com/forum/topic/32899/

• Get the error when you attempt to cancel the shipment of Release 11i

  
  Hi all

  I get the error while I am trying to cancel the amount open against relase expedition with multiple (4) below the distribution lines.

  Send # 2 # 3 quantity invoiced greater than the quantity shipped 2205 88181 Distribution

  Scenario-

  For shipment of release # 2 -

  Quantity ordered - 8820

  Due Qty-2

  Received Qty - 8818

  Qty. to beak - 8818

  Press release # 2 is to have 4 lines of distributions. Against distribution, line 1, 2 and 3 of the delivered quantity is 2205 while distribution on line 4, deilvered qty is 2203.

  But the quantity invoiced is 8818, only line 3 distibution and against the other lineages invoiced quantity is 0.

  Please let me know what to do now in order to cancel (the relase open expedition 2) amount in this case.

  Good reply as soon as POSSIBLE.

  Hi all

  It is not possible ancel relase shipping open quantity (2) in this case in the support environment.

  It is better for finally closed the expeditions of this release.

  But it is worth noting that finally close or cancel actions are intended to prevent additional changes to the purchase order. This includes invoice or receipt.

  This cannot be undone.

  Kind regards

  Piyush

• Get the error when running rcu.bat

  Hi all

  After a successful installation on ODI 12 c.

  I am trying to run the rcu.bat but I get the error below.

  "Cannot find the javaw.exe.

  just me to get rid of this error.

  Thanks in advance

  Kind regards

  Fabien Manirao

  HI Vivek,

  JAVA_HOME is a regular path whenever we install JDK in our machine and if it does not support other tools.

  ODI_JAVA_HOME we define as the JDK path even as ODI motor needed Java and backgrond processes for studio ODI

  Kind regards

  Phanikanth

• Get the error when the wsdl

  Hello
  
  I installed WCC 11.1.1.6. I downloaded the WSDL content WebCenter for CheckIn. While hitting the WSDL by SOAPUi, I get the error "the request requires user authentication. It MUST contain a header field WWW-Authenticate (section 14.46) containing a fault that is applicable to the requested resource. The client MAY repeat the request with a suitable authorization (section 14.8) header field. If the application already includes identification of the authorization information, then the 401 response indicates that authorization was refused for those credentials. If the 401 response contains the same challenge as the previous answer, and that user agent has already attempted at least once authentication, then the user SHOULD be presented the entity that was given in the response, since that entity MAY include diagnostic information relevant. HTTP access authentication is explained in article 11 ".
  
  Any help is appreciated.
  
  Thank you.

  Hello

  Open SOAP UI - projects - - name of WSDL - demand.

  Highlight and select request - down left - ask properties see - here, username / password will be displayed.

  I hope this helps.

  Thank you
  Srinath

• Get the error when loading data into the base cube

  Hi all
  
  I get the error by loading the file of hollow data to the database below.
  Please take suggest me...
  
  I use ESSBASE 9.3.1.3.
  
  
  Error:
  
  Basic charge database
  The Xchgrate database management
  Load the database Interntl
  Sample application loaded - connection established
  Start the application [example] with the process id [1688]
  Empty invalid character in name (E:\My personal Data\Test\222.txt) based on the ESSAPI EssUpdateFile
  Unexpected error Essbase 1030010

  Empty invalid character in name (E:\My personal Data\Test\222.txt) based on the ESSAPI EssUpdateFile

  Essbase has problems with spaces (white space characters) the path names (my personal data)

  Rename your path or move the data file to a location that has no characters/spaces in the path name.

• Get the error when importing topology, 11.3 to 11.5 ODI scenarios

  Hello
  
  Recently, I had installed ODI 11.1.5.
  Now, I'm importing topology and scenarios exported from my former ODI 11.1.3 via script shell on a Linux machine.
  There are about 25 topology and about 40 scenarios. When I run the script on these some topology and scenarios imported and the rest I get following error.
  Imported files are not persisted. Sometimes even any resulting file and when I run the next time the same file gives an error.
  
  oracle.odi.oditools.OdiToolException: this ODI tool must be connected to the repository but failed to connect to repository
  at oracle.odi.oditools.OdiAbstractToolRunner.executeCoreTool(OdiAbstractToolRunner.java:133)
  at oracle.odi.oditools.OdiAbstractToolRunner.executeTool(OdiAbstractToolRunner.java:47)
  at oracle.odi.ToolRunner.main(ToolRunner.java:75)
  Caused by: oracle.odi.core.config.MasterRepositoryResourceFailureException: org.springframework.jdbc.CannotGetJdbcConnectionException: could not make connection JDBC; nested exception is oracle.odi.jdbc.datasource.ConnectionTimeoutException: a timeout occurred while connecting to the database
  at oracle.odi.core.repository.Repository.getMasterRepository(Repository.java:79)
  at oracle.odi.core.OdiInstance.createMasterRepository(OdiInstance.java:491)
  to oracle.odi.core.OdiInstance. < init > (OdiInstance.java:544)
  at oracle.odi.core.OdiInstance.createInstance(OdiInstance.java:521)
  at oracle.odi.ToolRunner.initInstance(ToolRunner.java:36)
  at oracle.odi.oditools.OdiAbstractToolRunner.executeCoreTool(OdiAbstractToolRunner.java:128)
  ... 2 more
  Caused by: org.springframework.jdbc.CannotGetJdbcConnectionException: could not make connection JDBC; nested exception is oracle.odi.jdbc.datasource.ConnectionTimeoutException: a timeout occurred while connecting to the database
  at org.springframework.jdbc.datasource.DataSourceUtils.getConnection(DataSourceUtils.java:82)
  at org.springframework.jdbc.core.JdbcTemplate.execute(JdbcTemplate.java:524)
  at org.springframework.jdbc.core.JdbcTemplate.query(JdbcTemplate.java:588)
  at org.springframework.jdbc.core.JdbcTemplate.query(JdbcTemplate.java:613)
  at org.springframework.jdbc.core.JdbcTemplate.query(JdbcTemplate.java:645)
  at org.springframework.jdbc.object.SqlQuery.execute(SqlQuery.java:111)
  at org.springframework.jdbc.object.SqlQuery.execute(SqlQuery.java:121)
  at org.springframework.jdbc.object.SqlQuery.execute(SqlQuery.java:136)
  to oracle.odi.core.repository.support.RepositoryUtils$ RepositoryInfoSource.loadRepositoryInfo (RepositoryUtils.java:180)
  at oracle.odi.core.repository.support.RepositoryUtils.loadMasterRepositoryInfo(RepositoryUtils.java:374)
  at oracle.odi.core.repository.Repository.getMasterRepository(Repository.java:77)
  at oracle.odi.core.OdiInstance.createMasterRepository(OdiInstance.java:492)
  ... 6 more
  Caused by: oracle.odi.jdbc.datasource.ConnectionTimeoutException: a timeout occurred while connecting to the database
  at oracle.odi.jdbc.datasource.LoginTimeoutDatasourceAdapter.doGetConnection(LoginTimeoutDatasourceAdapter.java:117)
  at oracle.odi.jdbc.datasource.LoginTimeoutDatasourceAdapter.getConnection(LoginTimeoutDatasourceAdapter.java:62)
  at org.springframework.jdbc.datasource.DataSourceUtils.doGetConnection(DataSourceUtils.java:113)
  at org.springframework.jdbc.datasource.DataSourceUtils.getConnection(DataSourceUtils.java:79)
  at org.springframework.jdbc.core.JdbcTemplate.execute(JdbcTemplate.java:524)
  at org.springframework.jdbc.core.JdbcTemplate.query(JdbcTemplate.java:588)
  at org.springframework.jdbc.core.JdbcTemplate.query(JdbcTemplate.java:613)
  at org.springframework.jdbc.core.JdbcTemplate.query(JdbcTemplate.java:645)
  at org.springframework.jdbc.object.SqlQuery.execute(SqlQuery.java:111)
  at org.springframework.jdbc.object.SqlQuery.execute(SqlQuery.java:121)
  at org.springframework.jdbc.object.SqlQuery.execute(SqlQuery.java:136)
  to oracle.odi.core.repository.support.RepositoryUtils$ RepositoryInfoSource.loadRepositoryInfo (RepositoryUtils.java:180)
  at oracle.odi.core.repository.support.RepositoryUtils.loadMasterRepositoryInfo(RepositoryUtils.java:375)
  ... 8 more
  
  
  Please guide me in this regard.

  Ritika you should go for
  C:\Users\Current_User_name\AppData\Roaming\odi\oracledi

  In the oracledi folder, you will get the userpref.xml

  Thank you.

• Get the error when reinstalling windows 7 on the drivers

  Im having a problem reinstalling windows, I hope someone can help me the finishing process.

  When I start the machine I get an error saying please insert boot media device., so I inserted my disc of windows 7 to begin the intall

  I chose Custom just to do a clean install but when comes the next page, it says that I have not all drivers. I guess his doesn't see is not my hard drive and I have no option to choose and im stuck in this page... can someone help me with this one

  If the installation fails again, it may be a hardware incompatibility problem. Go to the Windows 7 Upgrade Advisor on the Microsoft website to see if your computer can run Windows 7.

  If you have compatible hardware and your computer still stops responding, disable any unnecessary material. Remove (USB) universal serial bus devices. Remove or disable network cards, sound cards and cards of the series; and then restart the installation.