Get the error 'windows' failed to start the spooler service on local computer, error 1075 printing when you try to install a printer.

Similar Questions

• I get an "Error 1317" message when you try to install Corel Office on Windows XP.

  Corel directed me to your site at < support.microsoft.com//kb/872903=""> . I have consulted the c: / drive properties dialog box, but it led me to click on the Security tab. In Windows XP there is no security label that I see. Additional steps for XP directed me to Windows Explorer > tools > Folder Options, then click on the view tab in the advanced settings, check the box for "Use sharing simple files (recommended)", but this isn't one of the options available.

  How can I change the security settings for SYSTEM in XP? On < support.microsoft.com=""> all the instructions I found are for Windows 7, although I chose Windows XP System I need information.

  Thanks for your help.

  Hello

  To resolve this problem, make sure you have the necessary permissions on your hard disk or disks. To do this, follow these steps.

  NOTE: because there are several versions of Microsoft Windows, the following steps may be different on your computer. If they are, see your product documentation to complete these steps.

  1. In the Windows XP Explorer, select the folder.
  2. Right click the folder and then click Properties on the shortcut menu.
  3. In the Security tab, click permissions.
  4. Select the everyone group, and then click full control in the Type of access list.
  5. Select the check box replace permissions on subdirectories .
  6. Click OK.
  7. Click Yes at the confirmation prompt if you want to replace permissions on all subdirectories.
  8. Click OK in the Properties dialog box (where is the name of the folder that you selected in step 1).
  9. Run the installation of Corel Office.

• I get an error 8024800A code when you try to install this update how can I fix this (definition 1.151.666.0) KB2310138

  I can't download this update, how to fix

  Hi Kelly,

  Method 1: Install the latest Microsoft Security Essentials definition updates.

  https://www.Microsoft.com/security/portal/definitions/howtomse.aspx

  Method 2: Perform the steps from the link below and see if it works.

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2

  Important:  This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/( )

  Warning of Chkdsk.
  
  Important: When running chkdsk on the drive if bad sectors are found on the hard drive, then chkdsk attempts to repair this sector. If no data is available while data may be lost.

  Good day!

  Answer please if you face concerns.

• Internet Explorer 8 for Windows Vista___Installation date: 1 / 16 / 2010 01:24 PM___Installation status: Failed___Error Details: Code 80246007 I get error 80246007 code when you try to install Internet 8. Can you help me? ___

  I get error 80246007 code when you try to install Internet 8 on my laptop that is running Windows Vista.  Can you help me?

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/threads

  Kindly repost in Forum Internet Explorer above.

  They will help.

  See you soon. Mick Murphy - Microsoft partner

• Error code 80242FFF when you try to install security update Cumulative for Internet Explorer 9 for Windows Vista (KB2699988)

  Error code 80242FFF when you try to install security update Cumulative for Internet Explorer 9 for Windows Vista (KB2699988)

  I've read other discussions on error code 80242FFF.  Based on suggestions from Microsoft technical support, I tried Mncrosoft Fixit.  Also, I started my computer in mode safetboot and tried to update.

  They did not work.  So, will you be able to help me find a solution?

  Thank you

  Ken

  Hello

  1. is that the copy of windows is enabled?

  2 is the issue limited to the installation of a security update Cumulative for Internet Explorer 9 for Windows Vista (KB2699988)?

  I suggest to perform the steps in the following article and check.

  Method 1: run the Windows update troubleshooting tool and check.

  The problem with Microsoft Windows Update is not working http://support.Microsoft.com/mats/windows_update/

  Method 2: I suggest you to put the computer in a clean boot state and check if Windows update installs successfully.

  To help resolve the error and other messages, you can start Windows vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below for more details:

  How to troubleshoot a problem by performing a clean boot in Windows vista and windows 7:
  http://support.Microsoft.com/kb/929135

  
  Note: When you are finished troubleshooting, follow these steps in the section above to reset the computer to start as usual.

  Method 3: If the problem persists, follow the steps in the following article.

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2

  http://support.Microsoft.com/kb/2509997

   

  Note:

  un) Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/ ( )

  How to back up and restore the registry in Windows

  b) while running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost

   

  For reference:

  0x80000FFFF error code when you download updates on a computer running Windows Vista by using Windows Update or Microsoft Update

  http://support.Microsoft.com/kb/946414

  Note:

  un) Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/ ( )

• error code 8000FFFF when you try to install updates from windows update.

  error code 8000FFFF when you try to install updates from windows update.

  Lonnie,

  8000FFFF error code when you click on "check for updates" in the item of control panel of windows on a windows update computer vista http://support.microsoft.com/kb/946414

• I get an error Code 49 when you try to update my applications. I emptied my Temp folder. I have a Mac. Help, please.

  I get an error Code 49 when you try to update my applications. I emptied my Temp folder. I have a Mac. Help, please.

  Hello

  Reference:--

  Open the Temp folder.

  Clear the contents of the Temp folder.

  Disable your Antivirus and firewall computer for awhile.

  Launch Desktop CC and try to download Apps.

  You can also consult the document below.

  Error downloading creative cloud applications

  Hope this helps!

• Get the error access denied when you try to install Windows 7-64 bit Okidata IBM-ML321 of windows update. Error reported in the newspaper like 80070005

  Can install printer drivers which are in 'standard list of printers', but when I try to install a local printer and choose update windows for the Okidata IBM-ML321 on Windows 7-64 bit driver, it errors when you try to install.

  Hi David,

  I suggest you scan the computer antivirus using the Microsoft Safety Scanner.

  Microsoft safety scanner will help us to get rid of software viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note:

  1) the Microsoft Safety Scanner expires 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  2) if you run the virus scan of the program which is infected with the virus will be deleted. Therefore, reinstall the program. Also, if files and folders are affected by the virus, while they might even get deleted.

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• Getting error code 80004005 When you try to install an update to windows 7

  When you try to install an update to windows 7, I get a failure during Windows Setup. The error code is 80004005.

  80004005 = unknown error 0 x - can occur due to programs/services to interfere in the background.

  http://support.Microsoft.com/kb/929135
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• Error 80070652 occur when you try to install the update for microsoft works 9 and 2007 microsoft office suite Service Pack 2 - why?

  CONTINUE TO RECEIVE AN ERROR 80070652 CODE WHEN I TRY TO INSTALL THE UPDATES FROM THE WINDOW FOR MICROSOFT

  WORKS 9 AND 2007 MICROSOFT OFFICE SUITE SERVICE PACK 2 - WHY?

  Hi SonjaThibodeaux,

  ·         You are able to install all other updates without any problems?

  ·         Remember to make changes to the computer, after which the issue started?

  ·         What are the KB numbers associated with the updates?

  Try to reset Windows updated components and check if it helps:

  How to reset the Windows Update components?

  I hope this helps.

• Received error code: U44M1I216 when you try to install the updates

  When you try to install the updates for my adobe products, I received the following message is displayed:

  Photoshop Camera Raw 7.4

  There was an error of installation of this update. Quit and try again later. Error code: U44M1I216

  
  

  Update 6.0.5 extensions Manager

  There was an error of installation of this update. Quit and try again later. Error code: U44M1I216

  
  

  Adobe Photoshop 13.0.5

  There was an error of installation of this update. Quit and try again later. Error code: U44M1I216

  Appreciate any help and suggestions.  Thank you.
  

  Hi Jeff,

  I had a whole series of mistakes differrent, but thought of the discuussions in http://forums.adobe.com/message/5273970#5273970 would be the resolution, but as you can see by my comment on this subject, that this still has not first solve my problem. I finally solved it by using this solutions all in contact with technical assistance, although I do not understand what we did different, he still was't straight forward and had several attempts to succeed. Still seems to be a problem Adobe must answer, especially with the new CC version and update to come Monday, I bet that there will be a lot of discussion of this problem the week next in the forums.

  See you soon

• I get this error 8007006E Code when I try to install Windows updates

  Original title: 8007006E error Code

  I get this error when I try to install the updates that my computer is telling me to install. Error Code 8007006E please help.  I think this is the beginning of a domino effect more major problems.

  Hello

  Follow these methods and check if that helps:

  Method 1:

  I suggest to disable the antivirus and then try to install the updates and check. Also, make sure that you enable the antivirus once the problem is resolved.

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to temporarily disable

   

  Method 2:

  You can try to reset the Windows Update components and then try to install the updates and check what is happening.

  How to reset the Windows Update components?

  http://support.Microsoft.com/default.aspx/KB/971058 

  Method 3:

  See also section provide below and check if it helps:

  Problems with installing updates

   http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Hope that information was useful

• I get an error "cyclic redundancy" when I try to install CS4 Design Standard CD

  I have the Adobe CS4 Design Standard student edition. I get an error message that says: "cyclic redundancy check" when I try to install the program via the disc. I always kept this disc secured inside the cd case, and it has no scratches. The disc could still be corrupted? How can I fix?

  If there is no solution, is there a way for Adobe customer service to allow me to download digitally the same student CS4 version, and then save the program with my original serial number?

  Thank you!

  
  

  You can download the demo version of the software through the page linked below and then use your current serial number to activate it.

  Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

  CS3 and CS4:

  http://prodesigntools.com/download-Adobe-CS4-and-CS3-free-trials-here.html

• Error media1.cab when you try to install BATMAN: ARKHAM CITY

  Hello. So, I tried to install this game since Christmas and I get the same error. It charge about 80% then stops. "media1.cab error". I resintalled my whole system, upgrade to SP1, updated all the drivers, I contacted the two WB Games, Microsoft (which there's no support to $100), I poured content on my hard drive without success, responds to EVERYTHING with no.! I'm running Windows 7 Ultimate. Can anyone help?

  It might be a problem with the DVD drive, but why always stopping in the same place? What other drives, works well?

  "the loading of the game well on ASUS laptop for my son"
  Which is almost as good to install on a machine to friends - lol.
  I assume that you have installed the game on your son's machine at the same time you
  first I tried to install on your? No scratches, etc., because he only did a DRM check on his machine now the game is installed.

  Just to clarify - you said earlier that you can copy the entire contents of the disc for
  your HARD drive.  When you tried to install the Setup.exe that you had previously copied on the HARD drive with the disc in the drive, you still can not install the game?
  It seems that as the Media1.cab file copy on the HARD drive it should not
  be corrupted.
  Maybe something in the DRMIS blocks the installation via the old copy to the turn of the HARD disk. Odd that you would still get the same error message about the media1.cab of files on the HARD drive, however.

  "I don't have a virus installed program."
  MS Security Essentials is free and good as any which you pay (I use Avast free version).

  BTW - the PS3 version arrives on blu - ray, but the PC version is still good old DVD.
  Are your specifications of machines greater or equivalent to laptop of your son?

  .

• error code 66A when you try to install update MS10-077

  I can't install this update... tried several times.

  Error code '0x8007066A' when you use the Windows Update Web site or Microsoft Update to install the .net Framework update:
  http://support.Microsoft.com/kb/2507641/