What is the frame on the front panel?

Similar Questions

• Is it possible to connect a simple 1 d array to a digital indicator or what would be the best way to display the numeric values of the array on the front panel?

  Is it possible to connect a simple 1 d array to a digital indicator or what would be the best way to display the numeric values of the array on the front panel? Examples or suggestions would be greatly appreciated.

  Thank you

  Tunis

  Thank you Adam, it's originally in a while loop, I placed it in a loop for example, wired County in the for loop and presto, this son of a digital indicator. It works very well. Thanks for the help folks.

• HP EliteDesk 800 G2 Small Form: The front panel audio connector - this only made type to use for headphones and microphone

  Hello

  I am trying to determine what type of audio 3.5 mm plug to put into the connector on the front panel for the use of a headset to make video communications.

  could be - sleeve, ring and end cap (mono audio and microphone)

  or

  could be - sleeve, ring, ring and tip (stereo sound and microphone)

  Having read through the manuals and nothing is said on the type to use.

  Hello world

  Just plugged the connector 4 poles on my headset combination for my mobile phone (cellular) and the box of pop - up asked me to select headset or microphone - no selection for both.

  Looks like the right sleeve is for headphones only, and the left one is for headphones or micro - selectable by the user and not the two on a single sheet.

  Everything explained by the practice - but not the paperwork in the manuals.

  #5 for microphone or headset - menu popup is displayed after you insert a 3.5 mm plug to select that one but not both at the same time.  (So I can't use my headset to phone)

  Thank you

  Son

• WANT 411c: MFP ENVY 411c lights on the front panel

  I find anywhere a note detailing the two LEDs on the front panel of the printer.  Of course, the left is the power light and the Start button / stop.  The other, 1/2 "to the right, has an icon as the icon of WiFi or wireless, or whatever it may be as an antenna with a radiating signal left and right of it.  What is this for?  It seems that there is a hole below and to the right of the symbol, but nothing ever shows up.  I turned off the wireless and turn it back on and or State shows a light here.  I reinstalled the software checks to see if that mattered and it made no difference.  I also unplugged the router and the printer, and that has not changed anything. It is connected to my wireless network and works very well.  What this has to do with some additional services such as ePrint?  I just lost some of them September 1, 2016.  Perhaps the only light when something just one of them?

  Hello

  That your work as expected wireless connection, there no problem with the wireless printer, just with his lamp wireless card.

  The lamp to indicate the wireless connection is turned on and must turn on once connected wireless.

  They have nothing to do with ePrint or any Web service, it must turn on once connected to a local wireless network.

  As you mentioned that you are connected and the printer maintain a wireless connection, it's probably just a blown bulb.

• How to scroll through the front panel when running

  Hello

  I'm using LabVIEW 8.5. I want to scroll the front panel automatically according to the moving object. I enclose a vi for example, in which I move the image, but if it is out of range of screen I have to scroll manually horizontal scroll bar to see the position of the image, it is possible that it automatically scrolls according to my position of the object.

  -Thanks in advance

  Hi, Mary,

  Well, now I see what you wanted. From my point of view using front panel scrolling for this animation is wrong way (if not I do not know your final objectives).

  I would recommend that you use the image for this control. Here the work by hand a little more, but you will get better results and will not scroll to your façade.

  For example, "quick and dirty" implemented:

  

  Andrey.

• Cannot resize the front panel

  I can't resize the front panel to a smaller window.  I put in (0,0) minimum window size, unchecked maintain proportions and to scale all objects.  I had originally put the size of the minimum window to 1012 x 616.  When I close the window property and re - open the settings still collated (0,0) while they are saved, but I am unable to reduce the size of window smaller than 1012 x 616.

  Also, there is open space on both sides in both dimensions, so I'm not running in the front panel objects.  What property/properties miss me that locks the minimum panel size?  One last thing is that I'm able to resize windows from any SubVIs I the same project and edit the minimum window size them and they respond as expected.

  Thank you

  Very strange

  comics ctrl + A, ctrl + C, ctrl + N, ctrl + E and ctrl + V solves everything.

  NOR should open with a debugger that vi... Oh where is that entry again heep peek ini thing...

  [Edit: here]

• Security on the front panel does not work

  Hello

  I have a problem and a question:

  Problem: I created some controls on the front panel and some groups which they are responsible. Administrators can see and do everything, the operator cannot see some of them. If I build exe it works on development PC but if I copy them to another PC, it does not. It does not show these elements of façade. Areas are the same, SCADA, only the names of PC are different. The two computers are not in the same network. I create local domains and users on two computers through domain account manager. What could be the problem?

  Question: How can I create an access control list (ACL) and assign them to the elements of façade programmaticaly? What is the syntax? I have found no examples of code.

  Thank you.

  I found the solution. Maybe someone also needs:

  You must copy the folder C:\Program Files (x 86) \National Instruments\Shared\Domain development pc to other PC, in which you want to have the same field and same users. It does not have to generate the new domain with exactly the same name on another pc and generate new users. You must copy the whole directory of your pc to the other pc. It works now.

• pause button on the front panel

  Hello.

  I try to run synchronous, continuous analog conversion of 2 cards of PXI-6259, and capture the State of the several digital at the same time.  I managed to get everything is configured and working properly, however I have a problem if the user presses the button "pause" on the front panel.

  From what I can tell, acquisitions of data will continue to run in the background (I'm using a task DAQmx and stop was never called).  For my analog inputs, this is not a problem.  However, the digital inputs always generate a ' 200010 - on-board memory overflow error. Due to the limitations of system and/or the bandwidth of the bus, the driver could not read data the device enough fast to follow the flow of the unit. »

  Is it possible to register for an event of user interface that is generated when the user presses the button "pause", so that I can stop the acquisitoin of data before the error occurs?

  Thanks in advance,

  -Rich

  NormPgh wrote:

  I thought to add my own button "pause" / control, but my users have become accustomed to hitting the pause on the front panel button, and it will be difficult to get them to change.  I guess that the error would remind them :-)

  Well, that's easy to fix - change the appearance of window properties if the toolbar is not visible, while the code runs, and there will be a pause button for your users to click.

  Many of our applications have a function somewhat like this.  My colleague implementation in a very simple way: he put the graphical indicator within a box structure.  Connect a Boolean control "pause" to the structure of the case, and that's it.  Data acquisition runs constantly but will only update the chart when the pause button is false.  This approach might work for you?

• The front panel indicator background color manually

  Hi I'm trying to color of the lights on the front panel depending on whether a test was successful or not. I created a Subvi to do the job, but I can't choose the right to the property to be set depending on what type of indicator is in color (ie. digital or string) then I used a case statement and try to detect what type of reference is passed in so I can set the right to property. I used a number of existing posts about it to this day.

  I seem to be unable to determine the type of reference correctly, I get errors about not being able to cast to the specified type, trying a color string indicator.

  I tried to add a screencapture but the system hung while I attached the VI, any ideas would be appreciated.

  Thank you

  When you compare references, the result tells you whether or not they refer to the same object, it does not tell you if they are of the same type.

  See VI changed to a technique to use.

• Using the 'current default values do' as a control on the front panel

  Hello

  I'm building a VI that uses a lot of digital controls. I want to use "do current default values" as a control Boolean on the front panel for the user.

  Is it possible to implement when the program is running? What would be an alternative, if this was not possible?

  Thank you

  Mhaque

  
  

• Best way to reset all controls on the front panel except one?

  Hello world

  I have an interesting problem, whereby I need to run successive tests using a test station which has several indicators on the front panel. At the end of each test, I need to reset all to default values, with the exception of a control (Test ID) who needs to keep his information - its value is used in an initialization status for test to ask for information from a database, so it can not be reset with the rest controls.

  I post all orders at a time using a reference ThisVI and VI Default Vals.Reinit All method, but this will obviously reset my control values (Test ID) as well. Any suggestions on how to keep properly or may store this information control while resetting all others. I can reset individually others but there is a little and more can be added as this system is developed.

  I don't really know what is the right way to proceed, and Labview has maybe one trick in his bag that I know to work around this problem.

  Thanks in advance for your suggestions,

  Alex

  Flank the node invoke with two nodes in the value property of the control to maintain the value. To the left we read as well as a right and the wires together. Connect three nodes with a thread of error to establish the order of execution.

  First reading place value on the wire, which is then written after the values have been reset to the default value.

  

• Sub - VI does not open (error 3 could open the front panel)

  I work for the VI (the version of Labview 2011 trail), I created a Subvi. At the same time, I opened this Subvi to adjust terminals connection - what I've done before - and after saving the file and its closure, the Subvi is remained unadjusted. In fact, I am not able to open the Subvi more. And when I want to open the file in a VI (e.g. running VI in windows), I get "' load the error code 3: could not open the front panel." "

  I can't also preform any task for example the recording of the main program for an older version, because this Subvi is present in the program.

  Nevertheless, the VI still works as a Subvi in the mainprogram I wrote - in how it worked until I adjusted the connection terminals.

  Is it possible to solve my problem without having to rewrite the entire Subvi? The Subvi about is attached in this post.

  I thank in advance

  PS. After the closure of Labview, it sends an internal report of the caveat.

  Hi all

  I added this issue to an existing bug report (what we call a request for Corrective Action); There was one reported with Labview 2010. I added this matter to him. The reference of this application is CAR #251753. With this reference, you can always ask the status of this bug report.

  Best regards

• How can I activate on labels in the block diagram, but not on the front panel?

  This question may have been asked before, but searching the Forum did not.

  In LabVIEW 2010, I have 16 indicators of chain on the front panel. I can't have the label for each Visible on the front panel, so I turned it off. But in the block diagram, I need distinguqish one of the other, so I need to make the label (name) visible.

  In the block diagram, if I select indicators Sting all together and go to properties and make the label visible, it makes visible labels on the front but not visible in the block diagram. What good is that?

  How the help of labels (name) of the indicators String visible in the block diagram, but not visible on the front?

  dbaechtel wrote:

  This question may have been asked before, but searching the Forum did not.

  Don't remember already asked this question and get help in this thread?

  Have you tried the things I said in that thread?  How did they not work?

  Right-click on the terminal of BD and make visible > labels.

  It probably will be the FP control show its label as well.  Then go to the FP control, right-click and go to Visible > labels and uncheck the box.

  The terminal of the comics will have a label, and control of the FP will not.

• Conflict of flow of data on the front panel

  Hello

  My vi is almost done, but I still have a problem with the front panel. I think that there is data traffic conflicts in my vi.

  When you run my vi, you will see the pop-up window asking you to set a path of file, control devices, selection of data to record and trace. Then, you might want to change the units, turn off all the buttons light and ok to select what data you want to save. Then click on RUN.

  The problem is; supposedly all the buttons are on by default, if you disable certain economies or tracing buttons to choose not to save, and then click RUN, after that all the buttons are again even if you have turned off before the race. They must stay off, if you have selected to save. The condition of main data flow is always the same be before running (only light buttons and ok).

  Do you have ideas of how to solve this problem?

  Thanks in advance

  You have what is called a race condition that usually slips in programs that use local variables.  If you look at your first while loop to read in the current value of the 'steam data hand' control and store in a shift register.  After the structure of the event outputs you write this offset value to register in the control and in the process of replacement of the changes that the user can do.

  A quick and dirty solution would be to manage the main event to change the value for 'Stream' in the structure of your event to update the shift register whenever the user changes the values in the control.

  A better solution would be to get rid of the shift registers and move local variables in the structure of the event.  As long as the option "lock the front until the end of the event" (I'm not sure of the exact wording and I work in the LabVIEW Base at the moment so I can't check) is selected it will ensure that you do not work in a race condition (you know the value cannot change inbetween you value reading, and you update the control).

  

  Even better would be to avoid local variables wherever possible.  This is general advice only and not not something that I can do much more tangible without knowing the details of how you want your application to behave.

  Hope this helps,

  Simon

• Connection monitor extra/DVI-I connection EVS-1464 (showing the front panel)

  Hello

  Developing a Vision System using the following:

  • LabVIEW 2010 SP1
  • LabVIEW 2010 SP1 real-time
  • Vision development 2010 SP1
  • EVS-1464

  My question is:

  How can I view my front panel, running on the Exchange virtual server on a monitor connected to the DVI - I output of the EVS-1464?

  Thanks in advance!

  Roy

  Hi Roy, I'm not sure if actually read Hossein that KB or not, but she deals with the display on the front panel on the network on a Windows computer, not on via the connection of the monitor on the Exchange virtual server running LabVIEW RT.

  To answer your original question, no, it is not possible to look at the façade of standard LabVIEW on the RT system today. All the code used to display all the buttons on the Panel before the user interface, controls, and indicators are simply not present in LabVIEW Real-time and is only visible on a separate computer that is running the development environment or by using a web browser that has the plugin installed LabVIEW.

  Have a display of the UI on RT is certainly a requested feature and it would be available someday. You can see this request: http://forums.ni.com/t5/LabVIEW-Real-Time-Idea-Exchange/Real-time-display/idi-p/1391108 . He has some good ideas for what other alternatives exist today also.

  However, it is a way to use the monitor on the Exchange virtual server and other LabVIEW RT systems output. Module Vision Development includes video RT on the screw that can display any image on the connected monitor. You can either display images captured from cameras or images custom overlay text and simple graphics objects (lines, circles, rectangles, etc.). It is certainly more effort than normal front panel editor in LabVIEW but it could be adapted to your needs if you want some things to be displayed. You will of course have no mouse/keyboard so that you cannot interact with any display of the elements directly.

  Eric

• Presentation of connector to the front panel DC7700

  Hello

  Cannot find the necessary schema in the database to support HP I hope someone on the forum can direct me to the table of connector on the front panel of the system (format minitour Convertible) DC7700 Board; It is available to the pins that tells me where to connect the various switches, LEDs etc on a new case.

  Any advice welcome.

  Peter

  FOUND IT!... in a previous post of the forum [see '' info DC 7700 Convertible Minitowers (CMT) motherboard?']  Among other things - who - shows that I had not scanned the tech Ref guide closley enough!  ;~[

  And thank you "mdscole" to highlight the trail.

  ;~) !!