get the history of use of data store

Similar Questions

• Cannot attach email word documents get the message 'enable documents and data '.

  Cannot attach a word document to an email. I get the message 'Enable documents and data' and it says that it is disabled. Don't enter iCloud setting there is no Document and data parameter. Is it because I use a free version of work?

  Whether the app is the word document?

  You can view the document word on the iPad?

• How can I get the history of the Clipboard "" show in Windows 7?

  I used to have a way (using MultiMon, an app for multiple monitor) to see my clipboard history, so I could easily see and copy something I had copied once, but then copied something else.

  How can I get the history of the Clipboard "" show in Windows 7?

  Thank you

  Read more:
  https://support.Office.com/en-CA/article/copy-and-paste-multiple-items-by-using-the-Office-Clipboard-714a72af-1ad4-450F-8708-c2931e73ec8a#BM4

• How to get the history of the project

  I'm developing a plugin Adobe Premiere. I wonder if where I can get the history of the project by using the SDK? I couldn't find anything in the documentation.

  Thank you

  No, there is no 'historical' project analysis API file.

• Cannot connect to a WPA - PSK with WLAN DW1520 Wireless-N particular, but can when no security is set to wireless. How can I get the card to use WPA - PSK?

  I have a DW1520 Wireless-N WLAN Half-Mini card in an Alienware M17X10. I am trying to connect my home through a TRENDNet TEW-435BRM access DSL issue in WPA - PSK.

  I was able to get the card to use the accounts wireless WPA2-PSK and WPA - PSK in other areas is not a problem directly related to WPA - PSK.

  I can get it to connect to the network when the diffuse TRENDnet without security (free release) and when directly plugged into the wireless router, cable - but every time I go to dissemination of WPA - PSK it can't connect?

  While in WPA - PSK the WLAN card can 'see' the network and wireless router can see the 'computer' (and is a 'trust machine'). I have one couple of other previous model Dells connected to the network without problem or needed changes if any ideas why I would have questions here?

  The driver installed is the 'last' to 5.60.48.35.

  I tried to restart the router and the computer without success. I use Windows Firewall.

  No bright sparks that can point me in the right direction?

  Thank you

  Declan

  Hello

  Try resetting the password in the part of the router wireless, then copy and paste it to the wireless card.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• How can I get the history, SID and other details of the accounts of users deleted in Windows XP, 7 and 8?

  Original title: deleted user accounts.

  Hi guys,.

  I want to know the activities of a user whose account has been deleted. How can I get the history, SID and other details of the accounts of users deleted in Windows XP, 7 and 8?

  Hello

  Thanks for posting in the Microsoft Community.

  There is no newspaper available for the activities of the user. There are just a few activities of windows and the error logs is stored in Windows.

  Hope this information helps.

  If you need help to resolve any issues related to Windows, please reply and we will be happy to help you.

• get the storage you use vCloud API

  I'm trying to figure out how to get the storage you use in an organization using vCO.

  There is information about the storage profiles used to an Org - vDC, but this information contains only the limit.

  My code looks like this:

  for each (var vdc in {org.getVdcs ()})

  for each (var profile in {vdc.toAdminObject () .getStorageProfiles ())}

  System.log (Profile.ToXml ();
  

  }
  

  }

  
  

  In the XML dump I only see the limit configured for this Org - vDC but not the consumption of this limit.

  The information are present in the Web GUI vCloud, how do I get this information from a code?

  Thank you

  Cristian

  LOL, favorite of this place, it will be VERY valuable to you... now, regarding your question, this help?

  This task scriptable takes an object provider VDC as input:

  System.log("============ Provider VDC: "+providerVdc.name+" ============");
  System.log("NOTE: If allocatedMB = 0, then the org vdc has been configured for 'unlimited'");
  var vdcs = providerVdc.getAdminVdcs();
  var host = providerVdc.getHost();
  for each (vdc in vdcs){
  System.log("====== Processing Org VDC: "+vdc.name + " ======");
  var queryService = host.getQueryService();
  var profs = vdc.getStorageProfiles();
  for each (var prof in profs) {
  var expression = new VclExpression(VclQueryAdminOrgVdcStorageProfileField.HREF, prof.getReference().href , VclExpressionType.EQUALS);
  var filter = new VclFilter(expression);
  var params = new VclQueryParams();
  params.setFilter(filter);
  var resultSet = queryService.queryRecords(VclQueryRecordType.ADMINORGVDCSTORAGEPROFILE,params);
  
  while (resultSet != null) {
  var records = resultSet.getRecords(new VclQueryResultAdminOrgVdcStorageProfileRecord);
  //System.log(records.length + " records found");
  for each (var record in records) {
  System.log("Storage Profile Name (usedMB/allocatedMB): " + record.name + " ("+record.storageUsedMB+"/"+record.storageLimitMB+")");
  }
  resultSet = resultSet.getNextPage();
  }
  }
  System.log("");
  }
  
  // --------------------------- End code Snippet
  
  Sample output:
  [2013-03-21 12:27:03.553] [I] ============ Provider VDC: pVDC1 ============
  [2013-03-21 12:27:03.554] [I] NOTE: If allocatedMB = 0, then the org vdc has been configured for 'unlimited'
  [2013-03-21 12:27:03.763] [I] ====== Processing Org VDC: demo ======
  [2013-03-21 12:27:03.859] [I] Storage Profile Name (usedMB/allocatedMB): Shared (0/409497)
  [2013-03-21 12:27:03.861] [I]
  [2013-03-21 12:27:03.863] [I] ====== Processing Org VDC: tiny ======
  [2013-03-21 12:27:03.959] [I] Storage Profile Name (usedMB/allocatedMB): Local (1792/6144)
  [2013-03-21 12:27:03.963] [I]
  [2013-03-21 12:27:03.965] [I] ====== Processing Org VDC: CimVDC ======
  [2013-03-21 12:27:04.016] [I] Storage Profile Name (usedMB/allocatedMB): Shared (231680/0)
  [2013-03-21 12:27:04.020] [I]
  March 21 at 12:29 pm
  

• Get the storage you use of a via powercli virutal machine

  Is there a oneliner where I can get the storage you USE a virtual machine?

  example:

  windc configured server used 100 GB 55GO

  I'd like to type something like: get - vm winDC |   Get-usedstorage

  and I want to go 55GO

  I wasn't able to find a good word

  Something like that?

  Get - VM | Select Name, UsedSpaceGB

• Relocation of the unusable VCenter Server after data store

  I needed to move the VCenter server only US planes of the DataStore has located on SAN1 to B data store located on SAN2 because we were retiring SAN1. After connecting directly to the VMhost which housed the vCenter Server VM, closing the vCenter Server and remove the vCenter Server inventory, I scoured data store A and moved the server vCenter to B data store directory. "After the copy is completed, I added the back inot inventory of vCenter Server, it works, toldi it"I moved"and received an error message indicating the file vCentersrvr.vmdk ' was absent.

  A review of the content directory for vCenter data store b shows no vCentersrvr.vmdk, but rather lists a file called vCentersrvr - flat hard. The type of file, the file is listed as "file". I tried to rename this gall and turn on/off the VM, but still no luck. Here are my questions:

  1. Can I save this installation? The original directory no longer exists (it was deleted automatically after the copy of the file).
  2. If I can't save this installation, can I just rebuild a new vCenter Server and Add (2) hosts that are currently managed by the vCenter Server server has failed?

  There is another method to recreate the descriptor VMDK files. http://www.phdvirtual.com/VMDKstubgenerator

• After the installation, I get the message "cannot use this product under a guest account. That is what it is?

  I installed Acrobat Pro XI (academic edition).  But I get the message "cannot use this product under a guest account.  What should I do?

  Run as admin / talk to your IT Department.

  Mylenium

• Using several data stores, cannot migrate the vmx file in a data store

  I am host migration between 3.5 and 4.0, and part of the migration requires me to vmotion data to a single shared LUN data warehouses.  From there on, I import the virtual machine in 4.0 and using the script to migrate the two VM disks at different stores of data below.  The problem I have is that the configuration (vmx) file not migrated and is left on the shared storage LUNS.  Anyone knows how to go beyond this?

  The Script:

  $VMDisk = 'disk 1 '.

  $VMName = 'TestVM '.

  $TargetDS = get-Datastore - VMHost (Get-VMHost-$S.id Id) | Where-Object {$_.} Name - like "PMV"} | "" FreeSpaceMB tri-objet-descending | SELECT name - first of all 1

  $vm = get-View - ViewType VirtualMachine-filter @{"Name" = $VMName}

  foreach ($dev in $vm. Config.Hardware.Device) {if ($dev. DeviceInfo.Label - eq $vmDisk) {$diskId = $dev. Key}}

  $spec = new-Object VMware.Vim.VirtualMachineRelocateSpec

  $diskspec = new-Object VMware.Vim.VirtualMachineRelocateSpecDiskLocator

  $diskspec. Data store = (Get-Datastore-name $TargetDS.Name |) Get - View). MoRef

  $diskspec.diskId = $diskId

  $spec. Disk = @($diskspec)

  $task = get-View ($vm. RelocateVM_Task ($spec, "lowpriority"))

  OK, I think I understand your problem now.

  I fear that in the current construction of PowerCLI, the Move-VM cmdlet does not destinations of individual data for each virtual hard disk store.

  With the RelocateVM_Task method, it is possible.

  The following script moves a guest at 3 different data warehouses:

  -the. VMX file for DS2

  -hard disk 1 for DS3

  -hard drive 2 TB DS4

  $vmName = "MyGuest"
  $vmxDS = "DS2"
  $osDS = "DS3"
  $dataDS = "DS4"
  
  $vm = Get-VM -Name $vmName
  
  $vm.Extensiondata.Config.Hardware.Device | %{
       if ($_.DeviceInfo.Label -eq "Hard disk 1"){
            $osDiskId = $_.Key
       }
       elseif($_.DeviceInfo.Label -eq "Hard disk 2"){
            $dataDiskId = $_.Key
       }
  }
  
  $spec = New-Object VMware.Vim.VirtualMachineRelocateSpec
  
  $osRelocate = New-Object VMware.Vim.VirtualMachineRelocateSpecDiskLocator
  $osRelocate.Datastore = (Get-Datastore -Name $osDS).Extensiondata.MoRef
  $osRelocate.diskId = $osDiskId
  
  $dataRelocate = New-Object VMware.Vim.VirtualMachineRelocateSpecDiskLocator
  $dataRelocate.Datastore = (Get-Datastore -Name $dataDS).Extensiondata.MoRef
  $dataRelocate.diskId = $dataDiskId
  
  $spec.Disk = @($osRelocate,$dataRelocate)
  $spec.Datastore = (Get-Datastore -Name $vmxDS).Extensiondata.MoRef
  $spec.Host = $vm.Extensiondata.Summary.Runtime.Host
  
  $task = Get-View ($vm.Extensiondata.RelocateVM_Task($spec, "lowpriority"))
  while("running","queued" -contains $task.Info.State){
       $task.UpdateViewData("Info")
       sleep 5
  }
  

  BTW, you can use the cmdlet Set - hard disk to a virtual disk that is specific to a data store.

  But as I understood what is not possible in your environment.

  ____________

  Blog: LucD notes

  Twitter: lucd22

• Report on the use of data store based on cluster (not data center)

  Hello

  I want to create separate HTML reports for each cluster I have in my virtual Center. I've created a script, but it doesn't seem to work. This script creates outputs separated from HTML based on clusters, but all the files have the same data, i.e. all data that are available in the Vcenter stores. How can I separate them with regard to the cluster in which they are assigned to the place?

  ===========================================================

  # Functions for math operations.

  usedspace {} function

  Param ($datastore)

  [math]: round (($datastore.)) CapacityMB - $datastore. (FreeSpaceMB) / 1024,2)

  }

  function dscapacity {}

  Param ($datastore)

  [math]: Round ($datastore. CapacityMB/1024,2)

  }

  freespace {} function

  Param ($datastore)

  [math]: Round ($datastore. FreeSpaceMB/1024,2)

  }

  function {percentage

  Param ($datastore)

  [math]: Round ((($datastore.)) FreeSpaceMB/1024) /($datastore.) CapacityMB/1024) * 100) / 1.2)

  }

  #Connect to Vcenter

  to connect-viserver-Server < myservername >

  # CSS stylesheet

  $a = '< style >.

  $a = $a + "BODY {background-color: Gainsboro ;}}.

  $a = $a + "TABLE {border-width: 1px;}. border-style: solid; border-color: black; border-collapse: collapse ;} »

  $a = $a + "TH {border-width: 1px;}. padding: 5px; border-style: solid; border-color: black; "{background-color: Blue}".

  $a = $a + "TD {border-width: 1px;}. padding: 5px; border-style: solid; border-color: black; "{background-color: PaleTurquoise}.

  $a = $a + ' * {do-family: Verdana, Arial, Helvetica, without serif;} '. font size: small ;} »

  $a = $a + ' < / style >.

  # get a list of clusters

  $clusters = get-cluster

  # Create HTML report for each cluster

  foreach ($cluster in $clusters)

  {

  $datastores = get-Datastore. where {$_.name - notcontains 'local'} | Sort the name

  $Report = @)

  {ForEach ($datastore to $datastores)

  $row = "" | Select-object Datastore, Datacenter, CapacityGB, UsedGB, FreeSpaceGB, PercentFree

  $row. Data store is $datastore. Name

  $row. Datacenter = $datastore. Data Center

  $row. CapacityGB = dscapacity $datastore

  $row. UsedGB = usedspace $datastore

  $row. FreeSpaceGB = freespace $datastore

  $row. PercentFree = % $datastore

  $Report += $row

  }

  $Report | Tri-objet-property PercentFree | ConvertTo-Html-head $a | Set-Content "D:\VMware\Scripts\Reports\Storage\$cluster.html".

  }

  ===============================================================

  To recover the cluster data warehouses, you must change the line:

  $datastores = get-Datastore. where {$_.name - notcontains 'local'} | Sort the name

  in:

  $datastores = $cluster | Get-Datastore. where {$_.name - notcontains 'local'} | Sort the name

• Incompatibility of the use of data store

  Hi all

  I have a Lab Manager installation with about 2 TB of data warehouses is attributed to the. Comparing the use of the disc between du-sh and view on the use of the data store through the Lab Manager user interface, I see two completely different characters. I don't know what is to consume all of my space. Cleaning of garbage is the default value of 120 seconds.

  du-HS exit

  865G datastore_14/labmanhost

  259G datastore_19/labmanhost

  396G datastore_20/labmanhost

  That's what I see in the GUI. Show 103 VM remaining to use 0 MB.

  

  To scramble even more, if I look at my models some show that the use of 0 MB, but these have a 20 GB drive (and even more so because of the length of the chain caused by changing the template after the initial release it).

  

  Can someone explain what is consuming my drive?

  Thank you

  Then use the 'View Datastore use' page, press the button "Refresh disk space" at the top of this page.  Virtual machines with the length of the string of 0 indicate that you probably did not recently.

  As you probably know, Lab Manager stores its virtual machines as linked clones.  Each virtual machine is based on several VMDK which are dependent on each other, and multiple virtual machines can share nodes. Lab Manager cleans up the tree, the removal of nodes, it can through an asynchronous garbage collection process.  Any node with dependencies is not removed until these dependencies are removed.

  The column that you are using is 'Disk space after deletion', not space total disk used by this node.  Values are often zero because if a node a VM dependent, it is not cleaned when its deleted memory.  He doesn't want not to say that it does no disk space - sound suffice it to say that you will free all disk space if you delete it.

  For a better visibility of these dependencies, the mouse in the virtual machine and choose 'background '.  This will display the chain dependent records graphically, and as you mouse over nodes, you will see some information about them such as their size.  Note that not all nodes are "visible" in the application (except in this context point of view).  Only virtual machines with borders "BOLD" from this point of view can be displayed in Lab Manager (in the space to work, a configuration library or library templates).

  Steven

• How to get the input of &lt; af:dialog &gt; data using the custom command button?

  Hi all
  
  What will be the best way to get the data entry of the contextual dialog box by using the command button?
  
  I use jdev 11,112.
  
  can I use action or actionlistener?
  
  If I use the action, I can get data from managed bean. but not the actionlistener.
  
  can I use action or actionlistener?
  
  With respect,
  WP

  Hello

  Try to set the immediate property to true on the button Close (only put to the inputText component)

  Jean Lou

• problem with the history of EEG waveform data

  Hello world:

  I use SIT to create a user interface in Labview to communicate with a simulink model. After I configure the SIT connection manager and run the vi, the output was displayed in waveform graph.

  Now, I want to get all the data in the history of the map of waveform. I tried to use the graphic story property node to access the whole of the historydat. But nothing copied in the part of Y in the front of the cluster of waveform...

  Can someone give me a helping hand on what is the problem? or has anyone encounter the same problem when you use SIT.  I am really confussed...

  I've attached the vi, but to run the vi, you must have a simulink model corressponding and SIT, so I'm really sorry that you can not run it

  And thanks a lot a lot a lot for that.

  / Shangning

  I just realized this data is a 2D waveform table, which contains the waveform 2000 * 1, and each waveform data contains only 1 value of Y.