Just drive lights

Similar Questions

• No HARD drive light on Qosmio X 870

  Hi all

  I m coming on this forum to post something that has my curiosity because I bought my Qosmio X 870, 3 years ago...
  This series has no HARD drive light and I wonder why...
  I mean, it looks like "slikier" without light... But this HDD light is very useful in my opinion, it gives me a reading how my HARD drive works when my computer oar, allowing me to solve some problems and simply check the health of my laptop computer in general. I have to put my ear on the side of the HARD drive and listen to it if it is working or not, boring.

  Why is it like that? Is this just for the style?
  Thank you.

  We can discuss here everything, but no one here can tell you why this model Qosmio no HDD LED. Always new and new design I think. My S50 - B Satellite has not too much.

  To be honest, it is very useful to have, but I don't miss it at all.

• Hard drive light flashing.

  I know this has been asked before, but I do not see a satisfactory answer.

  I just installed Win 7 HP 64 bit on a new desktop. Once the system has been installed, the HARD drive light flashes at a constant speed of approximately 1 second.

  I checked the Task Manager and note that one solution wbengine.exe, offered in the past, does NOT work.

  However, I notice that the blink rate is about the same performance update in the Task Manager.

  Someone at - it a solution?

  After an initial Setup, things like the search indexing and early reading lights until the system installs.

• Satellite A305-S6825 - HARD drive light flashing sometimes

  I have the Toshiba Satellite A305-S6825, I bought in April. 250 GB and 3 GB of Ram.

  I notiice sometimes, when I'm not working on what the hard drive light flashes for a while. Is this normal?

  I have not checked all programs (I think) to a setting with automatic and/or scanning, etc.

  Are there any programs that are running in Vista Premium without me using the working on the laptop?

  I hope that the laptop is not broken.

  Alice
  U.S..

  The laptop is certainly not broken. The same thing happens with my two laptops from Toshiba.
  In the background, several processes are active and it is possible that antivirus checks or scans the HARD drive.
  Maybe some updates are installed at the moment. It can be anything.

  In any case, don't worry about it. Everything is OK.

• Satellite A210 - 1 4 - failed to start the laptop computer just orange light

  OK, so this is what happened:

  While my friend was working on his laptop computer that she had his charger plugged but it did not load. I discovered that the lead from the Charger AC/DC had frayed and should resolidering. After that the laptop was working fine, I looked inside the laptop to check the AC plug connector before I fixed the cable.

  I noticed that the WiFi card was broke, so I changed it to a WiFi card in my other laptop used. After back the laptop together and put the battery in, the lights on the front flash blue only and the power light stays orange as if the laptop is in stand-by mode. I can hear the hard drive turns and the CPU heats more CD-ROM drive works, but I can't start that the laptop just sits there with the Orange.

  I tried out the CMOS battery, I took out the main battery and just used the AC/DC adapter, but the same thing happens.

  ANY IDEAS?

  Hello!

  I'm not sure, but what happens if you remove the WiFi card you created in? The new card is may be defective or not compatible with the laptop.
  You can start without WiFi card?

  To me, it looks like a hardware problem and your laptop should be checked by a technician of the laptop. Maybe the motherboard needs to be replaced or something else

  Good bye

• The hard drive light

  Hi all.

  I just bought the Acer 7600U-UR24 all-in-one. I've updated Windows 8, updated to 8.1 and updated again. All Windows updates are made. I only installed a few programs now, including Office 2003 and iTunes.

  The problem I have, is what I suppose is the HARD drive, a red light about 3 inches to the right of the camera, blinks constantly, even after shutting down the computer, do not put it to sleep. The flickering is constant, regular and fast not irregular when you work and then do nothing. I tried to restart without result. Today, off, I went and took a shower and returned about 35 minutes later and it was still flashing. I tried to unplug the power supply from the wall and the computer for a few minutes, but he begins to blink once I have it plug it all back in.

  There is also a series of 8 white flashing dashes "pointing" to the power button. Not really a button but a stain on the upper right corner of the screen that you tap to activate it. They are blinking successively from left to right, and then finally by the flashing symbol of power. This continues when the computer is turned off and stops when it starts. Is this normal? It flashes all night.

  I tried the chat with a tech from Acer. She said it could be a static buildup in the motherboard. Asked me to unplug everything, hold the power button for 15 seconds, which you can't do because there is no power button, and then put it all together and turn it on.

  Am I missing something? I'm not new to computers.

  Thanks in advance for your help.

  Stuart

  I studied the blinking light that you are curious about. This light is a proximity sensor which will help you easily find the power button. If you place your hand in front of the flashing light, it should be flashing lights to indicate where is the power button.

• Drive light external HARD disk Warrior exploded

  I use DiskWarrior do a reconstruction of the hard drive to save the files, if possible. Hard drive does not appear on the desktop, which had been seen as a USB device on system information. During the reconstruction, the Seagate external HARD disk light exploded and is no longer visible to the Profiler system as a USB device. Should I cancel the reconstruction? Should I try disk referee to 'stabilize' the disc and run Disk Warrior?

  Can you describe the real problem which caused you to run DiskWarrior "to save the files?  Who can provide a clue about your current situation.

  If DiskWarrior' forever,' you have to cancel rebuild it later.  How long it has beed running?  It may take time, if repairs are done by DiskWarrior.

  DiskWarrior works repairing data directory player (which defines where the files are stored).  There are other types of utilities who hunt the disc for actual data.  For example

  https://www.prosofteng.com/data-rescue-recovery-software/

• USB HDD TRAY 1, 5 t: = red light drive lights works very slowly

  Hello

  It is brand new USB STORE 1, 5 t 3.5 "disk.

  Drive normally begins with the red light, initialize and move to blue light. Initially drive works slow - flashing blue when something happens.

  ... but after a few minutes of use, red light may turn on a moment (for e.g. when new folder is created or some files are copied - then drive works very slowly - it appears when you copy).

  After a few seconds, record going to the blue back light - and everything is OK until the switch next to the red.

  1 is this normal behavior?
  2. What is the meaning of red light when the drive is working?

  Thank you in advance.

  Hello

  I m no owner of this HARD but I have a theory.
  According to your information, I think that the red light only appears if data would be written to the HARD disk.
  The blue light appears during the reading of data from the HARD drive.

  Welcome them

• IdeaPad U410 without hard drive, lights after updates.

  Hello

  I imported just an Ideapad u410 of the United States to the United Kingdom. It turns on well, I started noticing the proglem wifi everyone have. Not much, got a USB wifi adapter carrying around I can use. Then I noticed that the hard drive (C, no other visible hard drive) was rediculously small (20-30 a few GB, I forgot the exact figure) with almost all of it is the used space. I thought it was a partition for the operating system and for some reason, the rest of the disc wasn't show. I noticed icon indicating the button windows update turn off and thought that maybe the installer was not complete, so I pressed restart. It kept restarting, download updates and reboot, I'm gone for dinner when she proclaimed it would now install update 1 of 96. When I came back the laptop was turned off. I turned it on to be satisfied by a never-ending cycle of BSOD when starting, followed by a Startup Repair failed... I guess that it is are not enough space on drive C for the update of windows. What should I do now?

  
  

• Satellite A30 - 203 - didn't turn, just flashing lights

  My Satellite A30-203 does not illuminate. When I press the power button / nothing happens, but if I remove the power then when I press the power button all the lights other thanthe lights HD lights up and the power lights going outs and less than half a second after the rest of the lights will turn off.

  Is this what can I do with it?

  Hey,.

  In my opinion, there is nothing that you can do it sounds like a bad material work because Windows installation doesn t affect the startup procedure until Windows starts so you have a hardware problem.

  What you can try is the following:
  http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=21

  If it doesn t work you need professional help from technicians of laptop I think
  ?

• Hello I just bought light Room 5, did the download and it will not open because it does not recognize the user, help please

  Hello

  Please y at - it a phone number instead this stupid box, I downloaded room five light and it has is spent FRO download downloads wouldn't work because he says he does not recognize the user, please make me a disc of any day,

• Impossible to find connect them drive HARD Light and Power light after the change of office case - I got my answer

  I changed my case for reason of cooling, and I can't do the power light and the light work of HARD drive on the new case. I searched in vain on the web for the specification of the motherboard. The original HP PC is a HPE 130F. Motherboard is a H-RS880-Μatx (Aloe)
  Manufacturer: Foxconn. I found a few spec but not enough details on connector J18.

  The original front panel connector is an all-in-one type. I found the power switch and the reset light connector J18 but cannot do the work of LED.

  Any help appreciated.

  Thank you.

  CeD_B wrote: I changed my case for reason of cooling and I can't do the power light and the drive light HARD works on the new case. I searched in vain on the web for the specification of the motherboard. The original HP PC is a HPE 130F. Motherboard is a manufacturer of H-RS880-Μatx (Aloe): Foxconn. I found a few spec but not enough details on connector J18.

  The original front panel connector is an all-in-one type. I found the power switch and the reset light connector J18 but cannot do the work of LED. Any help appreciated.

  Hello CeD_B, I'm not familiar with your card connectors mother special façade, however if cables (wires) are inserted in a plastic connector, you may remove the wires and connect them individually. They are usually labeled.

  The son of LEDs for the power switch and the hard disk activity are polorized, which means they have a plus and a downside that should be connected to the pins on the motherboard in the correct polarity.

  If you have connected to power led and HDD led pins on the motherboard and the lights are not just back the sons and the led should light up, and the hard drive activity led should light up when the hard disk is written to or retrieved from the hard drive data.

  While this image is not your motherboard, it will offer an idea of connections pin on some motherboards.

  Search in the second post of this thread.

• No light on SAS drive

  We have a 3.0.2 host in a remote office, where one user said that there is no light on one of the disks.  It is one of the two 72GO SAS drives which are in the opposite direction, which ESX is installed.  The server is a DL585 G2.  On the homepage of Mgmt. systems of the server, it shows that all 8 disks in the box being fine - all the "indicator of problem" and "flag down" statistics are nil.

  ESX wouldn't be given evolving and therefore written to each drive?  Is it possible that the light itself to burn? (don't think I have ever seen)

  Personally, if it was me and I got maintaince contract for this server, I would have the disc replaced without worrying if it's just a light out or not. As others have said sometimes the plastic band that brings light to the front is slightly misaligned, or the led could have come loose, but at the end of the disc, but technically, the drive does not 100% if the stupid little light is not on.

  Just my 2 cents

  • Kyle

• If you use SSD what size minimum, you can use I'll just install the softwar winds 7 operation and put all the other programs on a hard drive Sata is the way it should be done?

  I'm building a new PC, I have the motherboard and it has a location for an SSD, this who has the ability of minium are? and if this store just drive the sofware opererating only, as I intend to have all my programs and data on a SATA hard drive is the way to corect to go? Could someone ' a please advise please.

  The minimum I recommend is 80 GB, if you can go for 128 GB to 160 GB, I would go for it.

  Windows 7 uses 10 GB of disk space, and you have to take into account future, Service Packs and updates.

  You must also consider your page file size that will depend on the amount of RAM you have installed.

  Other disk space requirements include your programs and hardware drivers.

  The benefits of having an SSD is to accelerate the performance of the operating system and applications. In order to have a just installed SSD for upgrading the operating system on a mechanical HDD as well as your programs wouldn't make sense. Store content or data that you create on the HARD disk.

• Screen has no light, but under the flashlight, I see it works

  Suddenly, the screen backlight is gone and the screen is completely black.

  But while I manually turn the flashlight on a screen, somehow I can see the display shows everthing correctly.

  There's just no light completely.

  What's wrong? I tried all types of keyboard resets, removing the battery and etc... without success...

  I heard that maybe the HARDWARE problem (fuse WLED or backlight). is this true?

  If Yes, can you screenshot a good resolution of the images, to see where WLED DRIVER or BACKLIGHT FUSE is located (I have macbook pro, 2013), and also, where I can buy (e.g. ebay links to this parts)?

  Thanks in advance

  You have already diagnosed yourself. This looks like an inverter of backlight for me also.

  Take it to any Apple store for a free evaluation.