Get the message: SynTP Lpr.exe facilities disk drivers Synaptics

Similar Questions

• An error message appears every time I start my laptop Alienware of window 7, the message reads: "wscript.exe - no disk".

  Hi all

  An error message appears every time I start my laptop Alienware of window 7, the message reads: "wscript.exe - no disk" there is no disk in the drive. Please insert a disk into \Device\harddisk1\DR1.

  I'm a bit confused with this error message, I don't know if there are viruses in my computer, or the reason why this error message whenever I start my computer,

  Although I installed file encryption software.

  This could be a virus? and how to prevent this error message appear on my computer.

  Sounds like malware. Run msconfig.exe, and then selectively uncheck items under the Startup tab until you find the culprit.

• I get the message AIOC. EXE has stopped working how to fix this

  How can I fix my system that aioc.exe has stopped working

  Hi Neil,

  Thanks for the reply.

  I need a little more information of the computer with the problem. Please help me answer the following questions:

  (1) what is the brand and model of the printer?

  (2) which toolbar is installed on your computer?

  (3) you are able to print after receiving the error message?

  (4) you have problems with the normally another impression of the toolbar?

  Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.

• Windows Vista startup in the Boot Manager Windows Im getting the message of File:\windows\system32\winload.exe and this isn't the start of the DVD

  Original title: Windows Vista upgrade to Windows boot disk boot manager is located in the computer but will not start up installation disc

  Im getting the message of File:\windows\system32\winload.exe

  Hi WillieGuyton,

  (1) since when are you facing this problem?

  (2) remember to make changes?

  (3) what is the complete error message you receive?

  (4) what is the number of brand and model of your computer?

  Method 1:

  Step 1: disconnect any external devices (printers, scanner, USB (universal serial bus) readers, etc...)  Except the keyboard and mouse and then start.

  If this solves the problem, then add back devices at a time until you discover the piece of hardware causing the issue.  Then get any drivers\software update for the device.

  Step 2: Follow the steps mentioned in the link below to access pre - install the system recovery tools.

  How to access the System Recovery Options menu?

  Run the tool to restart system as shown in the link below
  How to use Startup Repair?

  
  Method 2:

  Step 1:

  Set the first boot device in the DVD in BIOS to boot from the Windows Installation DVD. To do this, see the documentation that came with the computer.

  Important: Change BIOS (Basic input output system) /semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Step 2: Follow the steps mentioned in the article below for the restoration of the Boot Configuration database (BCD) store

  Windows no longer starts after you install an earlier version of the Windows operating system in a dual-boot configuration

  http://support.Microsoft.com/kb/919529

• I try to open most of the icons in my control panel, I can get the message: application not found c\windows\system32\rundll32.exe.

  How can I fix it so I can delete unwanted programs? I try to open most of the icons in my control panel, I can get the message: application not found c\windows\system32\rundll32.exe.

  Please press Crtl + Alt + Delete key on the keyboard. Now, you will get a new manager called tasks window.

  Now, please hold down the CTRL key on the keyboard and click file, new task on the Task Manager.  Now, you will get a new black window. Copy the following and paste it into the black command window and press ENTER. Restart the computer.

  Assoc .exe = exefile

  Assoc .lnk = lnkfile

• Windows easy transfer will not work. I get the message: "migwiz.exe - point of entry not found. How can I fix it?

  Windows easy transfer will not work.  I get the message: "migwiz.exe - point of entry not found.  How can I fix it?

  Hi PTTimothy

  1. what operating system is installed on the computer?

  2. you are the administrator of the computer?

  I suggest you to check and to provide us with the information about the installed operating system.

  http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

  Step 1:

  You can open the administrator and verify if you can open Windows Easy Transfer correctly.

  You can even check if you face the same question in the user account different or new user account.  You can create a new user account on your computer, and then check.

  Create a new user account-
  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

  Step 2:

  An analysis of the SFC and audit-
  a. click Start, click programs, on Accessoriesprincipally made, right click guestand then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click Allow
  b. type the following command and press ENTER:
  sfc/scannow
  A message appears indicating that "the system scan will start. Be patient because the scan can take some time.
  c. If all files require a SFC replace will replace them. You may be asked to insert your Win7 DVD for this process to continue.
  d. If everything is correct you should, after the scan, see the following message "resource protection Windows not found any breach of integrity".
  e. once the scan is finished, close the command prompt window, restart the computer and check.

  Check the link below for further guidance on scan SFC - mentioned
  http://support.Microsoft.com/kb/929833

  I hope this helps.

• At the start, I now get the message: AGMailAgent.exe

  At the start, I now get the message:

  Windows cannot find 'AGMailAgent.exe '. Make sure you typed the name correctly and then try again. To search for files, click the Start button, and then click search. »

  As I haven't typed anything at startup, I'm a bit puzzled by this message. Also, I don't know what the message refers. Can help you, please?

  According to the website Agics, it is associated with Virgin Media. You are able to boot into Windows after the error? That seems to be with the program to backup stuff V. You may need to reinstall the software due to corruption.

  I hope this helps.

  Jim

• I get the message of low disk space. I bought a 1 TB external hard drive and I want to know how to see what fills my c drive.

  I have a laptop.  I need the computer for class of models. I have the elite external hard drive WD book.  I just want to know how to find out what fills my disk c. I have a lot of pictures.

  Hello

  To see what fills your disk space on C:, try this free program:

  http://www.Jam-software.com/treesize_free/

  See you soon.

  p.s. Check to you sure it is C: and D: not that you get the message on.

  D: drives are normally the recovery Partitions, are 5-15GBs and should not be bothered with except to make recovery disks of.

• When you try to uninstall a program, I get the message setup.exe has stopped working, can someone help me with this problem

  I'm trying to uninstall a printer, but only part of it was uninstalled, there are 2 parts more than the necessary printer uninstalled and I get the message setup.exe has stopped working

  Hello

  ·         Faced with this problem specific to uninstalling the application with the printer, or with another application?

  ·         What is the brand and model of the printer?

  You can follow the method below and check if it helps.

  Method 1:

  I would say as you put your computer in a clean boot state and check if it works.

  How to troubleshoot a problem by performing a clean boot in Windows

  http://support.Microsoft.com/kb/929135

  Note: Don't forget to reset the computer to start as usual, once the problem is resolved. Follow step 7 on top of the kb article.

  Method 2:

  I suggest to install the application printer again and then try to uninstall it, if only the problem is specific to the printer.

  http://Windows.Microsoft.com/en-in/Windows-Vista/uninstall-or-change-a-program

  Hope this helps,

• try to download and install cs5 online and get the message "'Install.app' is corrupted and cannot be opened. You must eject the disk image. »

  try to download and install cs5 online and get the message "'Install.app' is corrupted and cannot be opened. You must eject the disk image. »

  You can also download the demo version of the software through the page linked below and then use your current serial number to activate it.

  Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

  CS5: http://prodesigntools.com/all-adobe-cs5-direct-download-links.html

• During the installation of Windows 7 or 8.1 using a USB stick - get the message "cannot be installed, it is a GPT.

  Hello

  During the installation of Windows 7 or 8.1 using a USB stick - get the message "cannot be installed, it is a GPT partition.

  I have 64 bit install discs for Win 7 and Win 8.1. These two install on my desktop in duel boot. I made a Flash DRIVE of each disk so I can install it more quickly.

  Problem: I get the cannot install because it is a GPT partition.

  Y at - there no way to make these 2 USB sticks work?

  Thank you, Brad

  Make sure you create your media recovery HP or USB Flash Recovery discs before you edit or change anything.

  Your computer does not have Microsoft's Downgrade rights and you must buy a copy of Windows 7 with a valid Microsoft COA and product key.

  The screenshots below is from a laptop HP 15 t-j100... options and the configuration on your computer screens may differ.

  You will need to DISABLE "Secure Boot" and ENABLE "Legacy Support" in the "Configuration of the BIOS start-up secure" on the settings page similar to what is shown below, until you try to install Windows 7.

  

  After you save the changes, the computer will ask you to confirm the changes... Accept the changes by typing the four digit code and press the ENTER"" key.

  

  If you install Windows 7 from a USB and see a message of "load a driver - a required CD/DVD drive device is missing", it's because as 'System Configuration' > 'Config USB3.0 in pre-start' is set to 'Enabled '. This should be set to 'Auto '.

  

  In addition, as the factory hard drive is partitioned as TPG, you must start using the internal CD/DVD UEFI or UEFI-Key/key USB to install Windows on a GPT-partitioned disk. Turn on or restart the computer and press "F9" or "ESC", then "F9" when prompted. Select the source of boot UEFI you use and you press "ENTER".

  

  I suggest using Windows 7 SP1 for the best installation experience. If the DVD does not start as UEFI, you may need to use a USB Flash drive (can ask "Quick start" DISABLING in BIOS) as the installation media. Please note that some computers may not recognize a valid active UEFI USB Flash drive if it is formatted in NTFS and may require only a FAT32 formatted USB Flash drive. You should be able to make a FAT32 formatted Windows 7 installation USB Flash drive using Rufus, UNetbootin, Universal USB Installeror WiNToBootic. I like Rufus, because it contains options for 'Plan of GPT partition for UEFI computer' and 'FAT32'.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• I get the message: education @0x74d3f290 referenced memory @ 0x74d3f290. The memory could not be written.

  Original title: memory problem

  I get the message: education @0x74d3f290 referenced memory @ 0x74d3f290.  The memory could not be written.

  Any suggestions?

  try running Memtest86 +, which runs from a floppy disk or CD and should eliminate or
  confirm whether your one or more of your sticks of memory are bad or the values of the SPD in the BIOS are correct.
  Let it run for as long as you can: 2,4,6,8 or several hours, so no errors at that time then your ram is OK.
  http://www.memtest.org/

  What were you doing at the time?

• Whenever I try to update, I get the message "windows Explorer has stopped working". It then seeks a solution, restarts, and immediately stops again. No error code just a constant circle. This has happened for days. I am running windows 7.

  Whenever I try to update, I get the message "windows Explorer has stopped working".  It then seeks a solution, restarts, and immediately stops again. No error, just a constant circle of shutdown and startup code.  This has happened for days.  I am running windows 7.

  I think that norton or mcafee may have been preinstalled as trial versions, but I've never actually used them. Unfortunately I can't use the windows Explorer, so I can't check if they are still there.

  We will cover all the possibilities.

  1. download each of the tools for deletion below, save it to your desktop:

  Norton Removal Tool: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee removal tool: http://download.mcafee.com/products/licensed/cust_support_patches/MCPR.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. After completing some you have a copy of your handy product key, uninstall all software (including LiveUpdate and Add-ons of Norton) Norton through Control Panel | Programs | Uninstall a program (or Control Panel |) Programs and features, if you are using the classic view)

  IMPORTANT! => Activate the Windows Firewall immediately after the restart.

  IMPORTANT! => Now you're "working without a net": no to ANYTHING else online (e.g., navigation, reading e-mail, chat) until you have completed the steps #4, #5 and #6 below!

  4. right click on one of the files that you saved in #1 above and select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then restart.

  5. Repeat step #4 for another removal tool.

  Tips:

  -Online use another computer to download the removal tool, if necessary, then transfer it to the computer via CD, DVD, or a USB brand new, never been used (flash drive), or a summer freshly updated in shape.

  -Online start the problem in Mode safe computer, if necessary, proceed as above.

  -Online after completing all of the above, uninstall AVG Free & reboot. Now do a new installation of AVG Free 9.0, this time select the CUSTOM installation option and do NOT install (uncheck) Linkscanner Search-Shield, Active Surf-Shield, security or the email of crawl components toolbar.

  Why you don't need your anti-virus to scan your email
       http://thundercloud.NET/infoave/tutorials/email-scanning/index.htm

  -Online download/run system update before running Windows Update again: http://support.microsoft.com/kb/947821

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I get the message "system restore has been transformed to group policy. to turn on system restore contact your domain administrator"does that mean

  I get the message "system restore has been transformed to group policy. to turn on system restore contact your domain administrator"does that mean

  This means that the function of system restore has become disabled, possibly through a group policy.

  To re - activate:

  1. click on start, run and type regedit.exe, and then press enter

  2. navigate to the following key:

  HKEY_LOCAL_MACHINE-Software-policies-Microsoft-Windows NT------SystemRestore

  In the right pane:

  1 delete the value DisableConfig
  2 delete the value DisableSR
  3. exit the registry editor.
  4 reboot.

  In Windows XP Professional, you can accomplish the above by using Group Policy Editor.

  1. click on start, run and type GPEDIT. MSC
  2. navigate to this path:

  Computer configuration-> administrative templates-> system-> system restore

  3. set turn off unconfigured system restore
  4. set the disable configuration not configured
  5. exit the Group Policy Editor
  6 reset.

• I get the message error 1327.invalid drive: M:------tries to install a nuance product

  I try to install dragon naturally speaking and I get the message, Error 1327.invalid drive: M:------.

  How can I fix it

  Hello

  You can try these:

  a. log on as an administrator or as a member of the Administrators group.

  b. Click Start, click Control Panel and then click on performance and Maintenance.

  c. click on Administrative Tools, double-click computer management and then click Disk Management in the left pane.

  d. right-click on the CD ROM drive and click change drive letter and paths.

  e. click the button modify and change the drive to K and then click Ok.

  f. click Yes to confirm.

  g. install Dragon Naturally speaking

  See also: http://nuance.custhelp.com/app/answers/detail/a_id/5720