Get the microphone to work

Similar Questions

• Satellite C660 - 18 c - can't get the microphone to work

  So, I couldn't get the microphone to work so I bought a new one. I also can not get this to work. I tried everyway I can think of and he will simply record is not all sounds and yes the microphone is on and the volume is full.

  Can someone please help me solve this? Its driving me crazy!

  Hi belthazora,

  Just to make sure that we are talking about an external microphone that you have connected to the microphone jack and not internal? I ask this question because the laptop doesn't have the internal mic.

  Anyway, if you use an external microphone ensure that it s listed in sound devices under the recording tab. You see it there?

  I also recommend an update of audio driver if it doesn t work. You can download all the updates on the official page of Toshiba:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

• Libretto U100 - cannot get the microphone to work

  Hello

  I have a problem with the microphone on laptop and also when using my headset Philips SHM3100 Multimedia bought recently. I tried to use the Windows Sound Recorder software, but my voice is not recognized at all.

  I have a headset Bluetooth Configuration of whose sound and the microphone works perfectly. Someone had the same problem and found a solution?

  Thank you much in advance.
  Kind regards.

  Post edited by: julia1

  Hello

  What a problem? Do you think that it is really a problem or perhaps only a configuration setting bad microphone?
  I think that he just misconfigured s mic settings!

  If you use the external microphone, you should check the settings in the-> sound & audio devices Control Panel.
  In the Volume press tab on the Advanced button and check if the Microphone control is not mute.
  Use the Advanced button and the brand, select options called Mic2 and mic amp.

  Good bye

• How can I get the microphone to work

  When I plug my head for classes Iam able to hear, but the microphone does not work so my instructor cant here me is a new Ant head set I even tried an older game with the same out come. So how do we operate? They both work on my dell desktop but I use my laptop for school.

  Hello

  Connect the microphone and run the fix of the below article.
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-audio-recording-problems

  Also take a look at the below articles.
  Connect one microphone, music player or other audio device to your computer
  http://Windows.Microsoft.com/en-us/Windows-Vista/connect-a-microphone-music-player-or-other-audio-device-to-your-computer
  Tips for solving common audio problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems

• I just installed my new lifeCam VX 6000, the video is perfect, but cannot get the microphone to work. people can see me but can't hear me in Skype. Help, please!

  I just started using the LIFECAM VX 6000 and it's great for video, but I can't micro e to work with my video calls in Skype.

  I did the thing of parameters of hole, etc. and no luck so far.

  Any suggestions?

  Hi LauraYQ,

  Method 1:

  I would say that microphone set as default, you follow the instructions below:

  1. Click Start and click on Control Panel.

  2. click on sound, then a new window will open.

  3. in the new windows, click on the 'Registration' tab and right click in the window and click Show disabled devices.

  4. now check if the Microphone is listed there and right-click on it and choose activate.

  5. Select the Microphone, and then click "Set as default".

  Method 2:

  If the previous step fails I suggest also you follow the steps in the link below:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-audio-Troubleshooter

  I hope this helps.

• Webcam Logitech HD C929 cannot get the microphone to work.

  What does take to get my Logitech C920 HD microphone work?

  Hello Rupitup,

  You have installed the drivers for your device? This could be the reason why you are having this problem.

  You can check if you already have drivers by following the steps below:

  • Search for the Device Manager on the on the search bar of your PC.
  • Click imaging devices or Devices of Interface , then check your device driver.

  If there is already a driver installed, you can update. If there is no driver installed yet, try to download it to your support site for the device.

  You can also get in touch with them to help you.

  Thank you.

• How can SP2309WC, I get the webcam and the microphone to work?

  How can I get the webcam and the microphone to work on a SP2309WC? Do I need a HDMI instead of a DVi cable? Downloaded drivers for my hybrid of studio 140g, although I am not convinced that they actaully installed correctly. Skype does not see the webcam of monitors or he sees the mic, that's exactly what I bought the monitor for! Any help greatly appreciated

  Theo

  Thanks for the help. Fixing the cable did the trick!

• Re: How to get the Tempo to work properly?

  Hello

  I have problems with the service of Tempo.

  I don't get updates via this application (all the settings of this application are accurate, i.e. "full control"). I know this because there are updates available online to my laptop via the pilot site of toshiba.

  When I installed first Tempo, updates for about a month, I received, and then all of a sudden, no update came through. My firewall is blocking either of this application.

  I tried to reinstall the application, but no change in the situation.

  Does anyone know if ALL updates are available via the website of driver toshiba out tempo? Because, in the month that this service worked, I got an update of the bios, but I recently saw a bios update online and Tempo has not always reports that it is available.

  Any ideas on how to get the Tempo to work properly?

  Thank you.

  I saw in your other thread you have installed SP1 on your Vista laptop.
  There may be some compatibility problems between SP1 and Tempo

  And Yes, as far as I know Tempo bring all available updates!

• Unable to get the restore to work - Satellite 1410 disc

  I have a Toshiba Satellite 1410. During a restore of system with restore disks, I forgot to plug it. During the windows set up (this screen where you put in your country and all that) the battery has flat that I plug!

  I tried to throw the disc again, as it came with a box when I rebooted that said "the system is not fully restored. Please re-run Setup '. So I turned off and restart, then the message goes up after that windows image appears during startup.

  I bought this laptop second hand so I have all the manuals or books with him, I do not know the keys on which support to MSDOs not that I know what to do from here, I do not know which key press during boot up to get the CD to work, I have pressed the keys left right and Center and found exhaust takes me to a page of the system but anything to get the CD to run again that I thought would get just the restoration will once again.

  So now it starts up saying ' not completely restored system, please run the installation again.

  Someone know or seen this before, and someone can tell me if there is a simple answer, which key support during the start up or how to fix this?

  Thanks in advance.

  Hello

  As Daniel said in the first assignment by pressing the C button the laptop should boot from the disc. Please press that several times the C immediately after the laptop from.
  Then you can be sure that the option has been enabled.

  The other possibility is to enter the BIOS and then to change the initialization of the order on CD/DVD first

• Satellite L20-153 may not get the WLAN to work

  Hello world

  I have a problem with my laptop wifes that I've not been able 2 fix.

  Its windows had crashed and wouldn't start in 'BACK' keept marker just flashes and nothing happened, I tried to restore to later work windows, but that did not help, nor the integrated security mode. So I took out the CD/DVD recovery and tried to do a new installation, the configuration of the installation has functioned well until he asked me 2 remove the disc and restart the comp I did.

  When it restarts the same problem appeared (flashing marker and nothing happens).
  So what I did I took a normal windowes XP (SP2) and reinstalled eveverything (I formatted the drive also) and rebooted and it worked.

  2 my next challenge is 2 get all the hardware working I got all all work, but the WIFI network (integrated).
  After I installed everyting I saw my network wireless but next time I started the comp, it disappeared along with all other WLANS that I use to be Alba 2 see. and when I still have refreash sound empty.

  I tried to disable it and then turn it on again but it doenst help.

  I also tried once more to use the Toshiba recevory drive but you have the same problem.
  So now I'm back with my windows Xp is installed, but I can't get the WLAN to work.

  There isn't any conflics material.

  So now I need your help about how to do 2.

  tanks a lot.

  Kind regards

  Quickhat

  Hello

  On WLAN, there is actually no philosophy, and few things are important:
  The wireless network card must be installed properly (properly listed in the Device Manager) and
  It must also be enabled. Initially with switch WLAN (WLAN light is on) and then activate it by using the FN + F8 key combination.

  After making this key WLAN card should see all available wireless networks. To connect to one of them is another theme.
  To be honest I didn't understand exactly what is happening. If I understand you right your laptop can see WLAN but after reboot all available wireless networks is not visible. Am I right about that?

  Have you tried rebooting your WLAN router and restart analysis the WLAN area?

• How to get the webcam to work?

  Hello

  As I don't have a book of instruction for this computer, can someone tell me how to get the webcam to work please?
  It is supposed to be something that appears on the side of the screen, but I left the sit of mouse here for centuries on all sides and nothing. Please help me.

  Kit_e

  Hello

  I agree with the user above. The user manual you can find on your computer because it s preinstalled.

  The webcam, you can use with programs like Skype communication. You can make a video call with friends and they see the webcam image. ;)

• Hello everyone, I just bought a Thunderbolt Apple display to use with my 2012 15 "27" Macbook Pro, Win10/Bootcamp. Is anyone know the procedure to get the display to work with Bootcamp Windows 10?  I have connected screen but no picture. TY

  Hi all

  I just bought a Thunderbolt Apple display to use with my 2012 15 "27" Macbook Pro Win10/Boot Camp running. Is anyone know the procedure to get the display to work with Bootcamp/Windows 10? Is there a setting in the training Camp that must be turned on to make it work? I have connected screen but could not get a desktop display.  Any help would be really appreciated! TY

  The monitor should have a TB and adapter power connector. The monitor works on both OSX. ? If so, shut down of windows, connect monitor and start Windows. Your TB 2012 monitor is not plug-and-play with Windows.

  Please see ports Thunderbolt and views: frequently asked questions (FAQ) - Apple Support .

  1. the "hot pluggable" Thunderbolt devices using Windows with Boot Camp?

  Thunderbolt hot plugging is supported under Windows 8 or 8.1 on all Macs from 2014 and later.

  For all other Mac computers, Windows 7, 8 and 8.1 scans and active them Thunderbolt devices connected to ports Thunderbolt during the Windows startup process. If your device has been plugged in not at startup, Windows detects not without a reboot.

• My new system see the the old system in the network, but I can't get the passwords to work and I tried all the. Now what?

  ESTABLISHING A NETWORK.

  My new system see the the old system in the network, but I can't get the passwords to work and I tried all the. Now what?

  Hello

  1. don't you make changes on the computer before the show?
  2. what version of operating system you are using on the computer?
  3. which network you're talking about (home wireless network or group)?
  4. which steps have tried?

  
  If you use a group home on the computer, see the link for more information.
  Home Sweet homegroup
  http://Windows.Microsoft.com/en-us/Windows7/help/home-sweet-HomeGroup-networking-the-easy-way

  You can also check out the link.
  Microsoft's strategy concerning lost or forgotten passwords
  http://support.Microsoft.com/kb/189126

   
  Provide us more information for you to help.

• Windows Update, sent the 16/10/2009 stops HP Total Care of work, need to do system restore to get the programs to work.

  Do system restore to get the programs to work. programs worked fine until Windows updated 10/16/2009

  Never, EVER use system restore to 'Cancel' an update, Windows Service Pack, or upgrade of IE! If you feel that an update is the cause of a problem, first uninstall the update. If the problem persists, then you can try the system restore.
  
  Please indicate your full version of Windows (for example, WinXP SP3;) Vista 64 - bit SP2; Win7 RC. Win7 RTM) when you post in a forum or a newsgroup.

  Can you tell us what updates have been installed?

  Have you contacted HP Support about this? ~ Robear Dyer (PA bear); MS MVP (that is to say, mail, security, Windows & Update Services) since 2002. DISCLAIMER: I do not represent nor don't work for Microsoft

• MG6320 on Mac - can't get the installer to work

  I can't get the installer to work, fails to connect to the printer without wireless or wired. However, the Apple system preferences printer box can find the printer, allowed me to install the Apple driver, and I can print. I can also scan but only by using the Apple software. What should I do to get the additional applications provided with the printer to work, and why the all-in-one installer driver does not work?

  I am running Mac OS X 10.7.5, no firewall problems.

  Thank you!

  Hello.

  Please try to download the latest drivers for Mac OSX and software on our Web site.  These items can be downloaded from the following link:

  http://www.USA.Canon.com/Cusa/support/consumer/printers_multifunction/pixma_mg_series/pixma_mg6320#D...

  If additional information is required, please call us at 1-800-OKCANON.