get the page flow scope parameter

Similar Questions

• Life of the Page flow scope bean unlimited taskflow

  Hello
  What I understand about the life expectancy of the scope managed bean defined in the flow of the page and defined in a stubborn workflow, is that this bean is alive until the workflow is alive. So if I define a managed bean adfc-config file. XML which is a non-flow linked task, then what will be the duration of life for this managed bean?
  Thanks in advance.

  Hello

  The life of the pageflowscope variable is limited to the taskflow that she declared as she bounded taskflow or a taskflow without limits that life does not change that it is part of the workflow unlimited or not.

  For e.g. If you have a UBTF and in the UBTF a page (xyz.jspx) that contains another delimited task flow as a region and if you set a variable in pageflowscope on this page (xyz.jspx) and try to access an area you would be able to do. However, if you set meeting or a larger scope (application) it will be accessible in the other taskflow that was added as a region.

  --
  Birame

• When I run mozilla or open a link in a new window but I get the page you want to load an additional page of the new tab opens with it, the difficulty?

  When I launch mozilla or open a link in a new window I get the page you want to load but an additional page of the new tab opens with her. I tried to change my homepage to different things (new tab, firefox home, see the blank page) but I always get a new additional tab to open. How can I get only one page to open it?

  Hello

  The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
  
  Note: This will make you lose all the Extensions and preferences.

  • Sites Web open is not recorded in less than 25 versions of Firefox.

  To reset Firefox, perform the following steps:

  For Firefox versions prior to 29,0:

  1. Go to Firefox > help > troubleshooting information.
  2. Click on the "Reset Firefox" line

     

     button.

  3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  4. Firefox opens with all the default settings applied.

  For Firefox 29,0 and above:

  1. Click the menu button

     

     click Help

     

     and select troubleshooting information.

  Now, should open a new tab containing your troubleshooting information.

  1. At the top right of the page, you should see a button that says "Reset Firefox"

     

     . Click on it.

  2. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  3. Firefox opens with all the default settings applied.

  Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

  This solve your problems? Please report to us!

  Thank you.

• I bought ipad air 1 after that 2013 but can not get the pages for free. Numbers and imovie I can. IOS9 running at the moment. I have pages when I connect on icloud on my pc. Can I transfer iPad app, because it is not in the ILO purchased in itunes.

  Hi everyone, this is my first post, also help on the post would be appreciated.

  I bought ipad air 1 after that 2013 but can not get the pages for free. Numbers and imovie I can. IOS9 running at the moment. I have pages when I connect on icloud on my pc. Can I transfer iPad app, because it is not in the ILO purchased in itunes.

  Thanks in advance

  Newbie

  The only way to install an ipad app is through the app store.  PC or Mac software does not run on the ipad.  Search in the contacts link at the bottom right of this page.  Give apple a call.

  I guess is the icon for pages in icloud for storing documents pages.  At the same time, apple had a cloud based pages.  Not sure what happened to her.

  R

• Can't get the page to print from Microsoft Visio. Also will not delete the queue.

  Can't get the page to print from Microsoft Visio. Also will not delete the queue.

  The problem arose when the USB printer to a laptop with Windows 7 on a desktop using Windows XP. The printer is a HP Deskjet D1660.

  Hunting around, I found a solution that had been proposed for someone else's problem. The detachment is shown below.

  Re: Update critical to correct a PC to printer communication problem, washer dot?

  Options

  • Mark as new
  • Bookmark
  • Subscribe
  • Subscribe to the RSS feed
  • Highlight
  • Print
  • Report inappropriate content

• I only get the (page 1 of 1) header and footer (file://C...) when I print online

  When I try to print a document online, I only get the (page 1 of 1) header and footer (file://C...)  This is not always the case.

  How to print the document, as indicated on the screen?

  I'm on HP Officejet Pro 8600, but had the same problem with my HP Officejet 6500.

  Windows 7

  He tried again on another messaging - and it worked! It must be me.
  Thank you.

• How to get the page number

  Sorry, but again I question. I want to select table by ID, where ID should be equal to the current page number. How can I get the page number?
  
  Davyd

  Try

  where ID = v('APP_PAGE_ID')
  

  Jeff

• Get the page to validate in WC3

  I have two pages I have forms on. I'm getting errors

  on the two pages of the section of the form of the pages on the validator 3 Toilets. How can I get the pages to validate the WC 3?

  Here is the code for the form:

  < div id = "form" > < h3 > Contact form < / h3 > < form action = "FormToEmail.php" name = "Contact form" method = "post" > "
  < fieldset > < div id = "label" > < label > name: < / label >
  < br >
  < input name = "Name" type = "text" id = "Name" size = "30" / >

  
  < / label >
  
  < / div >
  < div id = "label" > < label > address: < br >
  < input name = "Address" type = "text" id = "Address" size = "30" / >
  < / label > < / div > < div id = "label" > < label > City: < br > < input name = "City" type = "text" size = "30" / >
  < / label > < / div > < br >
  < div id = "label" > < label > phone number: < br > < input name = "phone" type = "text" size = "13" / >
  < / label > < / div > < br >
  < Lablel > e-mail address: < br > < input name = "email" type = "text" / > < / label > < br > < / fieldset >
  < fieldset >
  < label >
  < br > the elements you are interested in: < br >
  < p >
  < label > < input name = "services" type = "checkbox" / > heating < / label >
  < label > < input name = "cool" type = "checkbox" / > air conditioning < / label >
  < label > < input name = "solar" type = "checkbox" / > solar < / label >
  < br > < label > < input name = "isolation" type = "checkbox" / > insulation < / label >
  < label > < input name = "Plate" type = "checkbox" / > sheet < / label >
  < label > < input name = "water heaters" type = "checkbox" / > water heater < / label >
  < /p >
  < br >
  < p > < input id = "Submit" type = "Submit" value = "Submit" / > < strong > < / strong > < / fieldset > < / form > < / div >

  Then the other page has this code for the form, and it is not validate either:

  "" < form > < input type = "button" value = "print this coupon"
  onclick = "Window.Print (); return false; "/ > < / make >

  Any advice/help is greatly appreciated.

  Thank you!

  That's all you need:

  Nancy O.
  ALT-Web Design & Publishing
  Web | Graphics | Print | Media specialists
  http://ALT-Web.com/
  http://Twitter.com/ALTWEB

• The page flow stopped

  I was editing a chapter for three days with no problems, unexpectedly, blocked page output and I can't get the paragraphs to advance to the next page. I tried the following things:

  • check to ensure that the current and future pages have the same flow rate. (They do).
  • Save and close the file, quit FrameMaker and restart my computer
  • using a different paragraph tag
  • disable track text changes and try to move to the next page with text not marked
  • Select the preview with the text track changes mode off

  I've implemented the following:

  • FrameMaker 9.0p237
  • Windows 7 64 bit
  • A very rugged computer
  • A customer by a crazy time

  Help, please!

  Thank you

  Karen

  Great detective, Karen!  Each reference table has its own stream of individual text, so at some point got content added in the reference stream. I'm still working with text symbols indicating, for this reason, there is a little less likely to inadvertently get in the flow of bad content.

• Get the page of history as: subject: history

  Hello

  I was wondering.
  In Firefox, you can enter a few specific pages using the subject:-prefix
  Subject: config
  Subject: empty
  ...

  But is there also something similar to this to get the story? (subject: history).
  It is not necessary should be with everything; just that I can pick up the story with typing something into the address bar.

  Thanks for reading,
  Cosmeticos

  Or if you want the multi-column list of the dialog library ('view history') you can try this:

  chrome://browser/content/places/places. XUL

  When I test which, it starts with bookmarks and I have to get on with the story.

  BTW, I'm not sure that it is safe to make changes when it is displayed in a tab...

• I can't get the page to scroll properly. It looks like its swimming pool when I go up and down the page and takes forever. How should I do?

  I had a conflict of interest in order to get rid of one of the display drivers.
  Since then, the page is a not properly scroll. I had this happen in the past and that you do not remember how I fixed it.

  This help if you disable smooth scrolling?

  Tools > Options > advanced > general: navigation: "Use smooth scrolling".

• When we look something up on the internet, I'm always redirected 4to7 times before I get the page I'm after. What is a virous and how do I get rid of him?

  When I try to go on the internet, after you type in a subject, I get the usual list of items to the choice. But when I try to select one of them, I redirected sometimes up to 8 times before iget the page I want. I redirected pages yellow and many other sites that have nothing to do with what I am looking upward. If it is avirous how can I get rid of him.

  When I try to go on the internet, after you type in a subject, I get the usual list of items to the choice. But when I try to select one of them, I redirected sometimes up to 8 times before iget the page I want. I redirected pages yellow and many other sites that have nothing to do with what I am looking upward. If it is avirous how can I get rid of him.

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find. Reboot when necessary. (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner.

  The less you have to run all the time, most things you want to run will perform:

  Use Autoruns to understand this all starts when your computer's / when you log in. Look for whatever it is you do not know using Google (or ask here.) You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

  You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory. This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

  Do a house cleaning and the dust of this hard drive:

  You can free up disk space (will also help get rid of the things that you do not use) through the following steps:

  Windows XP should take between 4.5 and 9 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.

  If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
  http://www3.TELUS.NET/dandemar/spack.htm
  (Especially of interest here - #4)
  (Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )

  You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning

  How to use disk cleanup
  http://support.Microsoft.com/kb/310312

  You can disable hibernation if it is enabled and you do not...

  When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:

  -Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
  -Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
  -Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.

  You can control the amount of space your system restore can use...

  1. Click Start, right click my computer and then click Properties.
  2. click on the System Restore tab.
  3. highlight one of your readers (or C: If you only) and click on the button "settings".
  4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
  5. click on OK. Then click OK again.

  You can control the amount of space used may or may not temporary Internet files...

  Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...

  -Open a copy of Microsoft Internet Explorer.
  -Select TOOLS - Internet Options.
  -On the general tab in the section 'Temporary Internet files', follow these steps:
  -Click on 'Delete the Cookies' (click OK)
  -Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
  -Click OK.
  -Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
  -Once it's done, click OK, close Internet Explorer, open Internet Explorer.

  You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:

  CCleaner (free!)
  http://www.CCleaner.com/
  (just disk cleanup - do not play with the part of the registry for the moment)

  Other ways to free up space...

  SequoiaView
  http://www.win.Tue.nl/SequoiaView/

  JDiskReport
  http://www.jgoodies.com/freeware/JDiskReport/

  Those who can help you discover visually where all space is used. Then, you can determine what to do.

  After that - you want to check any physical errors and fix everything for efficient access"

  CHKDSK
  How to scan your disks for errors* will take time and a reboot.

  Defragment
  How to defragment your hard drives* will take time

  Cleaning the components of update on your Windows XP computer

  While probably not 100% necessary-, it is probably a good idea at this time to ensure that you continue to get the updates you need. This will help you ensure that your system update is ready to do it for you.

  Download and run the MSRT tool manually:
  http://www.Microsoft.com/security/malwareremove/default.mspx
  (Ignore the details and download the tool to download and save to your desktop, run it.)

  Reset.

  Download/install the latest program Windows installation (for your operating system):
  (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
  (Download and save it to your desktop, run it.)

  Reset.

  and...

  Download the latest version of Windows Update (x 86) agent here:
  http://go.Microsoft.com/fwlink/?LinkId=91237
  ... and save it to the root of your C:\ drive. After you register on theroot of the C:\ drive, follow these steps:

  Close all Internet Explorer Windows and other applications.

  AutoScan--> RUN and type:
  %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
  --> Click OK.

  (If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

  Reset.

  Now reset your Windows with this FixIt components update (you * NOT * use the aggressive version):
  How to reset the Windows Update components?

  Reset.

  Now that your system is generally free of malicious software (assuming you have an AntiVirus application), you've cleaned the "additional applications" that could be running and picking up your precious memory and the processor, you have authorized out of valuable and makes disk space as there are no problems with the drive itself and your Windows Update components are updates and should work fine - it is only only one other thing youpouvez wish to make:

  Get and install the hardware device last drivers for your system hardware/system manufacturers support and/or download web site.

  If you want, come back and let us know a bit more information on your system - particularly the brand / model of the system, you have - and maybe someone here can guide you to the place s x of law to this end. This isn't 100% necessary - but I'd be willing to bet that you would gain some performance and features in making this part.

• Get the page property top of page on the navigation stack

  Hello world

  I have a navigation stack, and I push pages top (sometimes even several times the same page, just with a different content)

  The pages are custom pages

  Now I have the problem that I need to get a specific page in the foreground property, and the property must be referenced from the navigation pane

  so my code that looks like this:

  //****************
  //***CustomPage.qml
  //********
  import bb.cascades 1.2
  Page {
      property variant titleLabel
  
      Container {}
  }
  
  ///This code is in my navigation pane, in a function
  
  var top = navigationPane.top; //top is a custom page, CustomPage
  
  //how to reference top.titleLabel ?
  

  I can't put it, I can't get it. I guess it's because the top is an unknown class . How can I do?

  Ah, the joys of debugging :/

  Found the solution for my problem: restarted Momentics, restarted my debugging device, now it works as expected (and it costs my 3 hours of my life)

  Sorry for the inconvenience

• How to get the Page Path in Webcenter at run time

  Hi all

  I want to get the path to the page of the current page which is consulted by the user at run time (rather, in the method of TF activity)... This path of the page will get the def page and do some operations above.

  We tried to get it from the context of Navigation, but node.path returns null.

  Guidance on how I can get the computer?

  Kind regards

  Siddharth

  SID,

  You can use the EL #{pageDocBean.pagePath} for the path of the page.

  K

• How to get the page name

  Hello

  I use JDev 11.1.2.4

  I have a page that is accessible from several pages, as in the menu bar link or any other page. I want to put values on the page function where this page is called from.

  any ideas how can I achieve this?

  Thank you

  Hello

  When you click on the button/link or something else, have a setPropertyListener with 'name' of the page and to = = #{pageFlowScope.yourVariable}. (assuming that you have it all in one single taskflow, otherwise use session it)

  And get this pageflowscope variable and have problems on this (to implement your own business logic)

  Thank you

  Alisson.