Get the parameters passed to a projector

Similar Questions

• using PostDelayedCall how to get the value passed through void * callbackData?

  Can someone tell me how to get the data passed through void * callbackData?

  The following code, panel_ptr has the right address but still contains zero.

  void CVICALLBACK value_changed (void * callbackData)
  {
  int * panel_ptr;
   
  panel_ptr = callbackData;
  calculate_new_value (* panel_ptr);
  }

  int sign;

  Panel = 2;

  PostDelayedCall (value_changed & Panel, 0.2);

  The problem is using the callbackData parameter if it is a pointer, it must be a pointer to something which is still topical at the moment that the callback executes. That is to say, you cannot pass the pointer to a local variable in callbackData as when the callback executes the pointer is no longer valid. You can switch from its value, instead, in this way:

  ... SomeFunction)

  {

  int sign;

  ...

  Panel = 2;

  PostDelayedCall (value_changed, (void *) Panel, 0.2);

  ...

  }

  void CVICALLBACK value_changed (void * callbackData)
  {
  int panel_ptr;
   
  panel_ptr = (int) callbackData;

  calculate_new_value (panel_ptr);

  return;
  }

  There are many discussions on the forums on callbackData parameter that you might want to read.

• How to get the parameters of the effect in the CEAP?

  Hi all

  I have a problem when I want to export the settings of the effect.

  (I checked the sample project "ProjDumper").

  Yellow: layer

  Red: one of the effect (text)

  Green: the parameters of the effect (I want to export these values).

  

  Here is my code:

          // 1. use a loop to find the "Text" effect
       // 2. get all the params from this effect
       A_long iL = 0;
       A_long jL = 0;
       A_long num_effectsL;
       A_long num_paramsL;
       A_char effect_nameC[30] = {'\0'};
       AEGP_StreamRefH streamH = NULL;
       AEGP_EffectRefH effectH = NULL;
       PF_ParamType            param_type;
       PF_ParamDefUnion        param_union;
       // Get number of effects on this layer
       ERR(Suites.EffectSuite2()->AEGP_GetLayerNumEffects(pLayerHandle, &num_effectsL));
  
       for (iL = 0; iL < num_effectsL; iL++) 
       {
            ERR(Suites.EffectSuite2()->AEGP_GetLayerEffectByIndex(g_PluginID, pLayerHandle, iL, &effectH));
            
            if (effectH) 
            {
                 AEGP_InstalledEffectKey     key;
  
                 ERR(Suites.EffectSuite2()->AEGP_GetInstalledKeyFromLayerEffect(effectH, &key));
                 ERR(Suites.EffectSuite2()->AEGP_GetEffectName(key, effect_nameC));
  
                 if (!strcmp(effect_nameC, "Text")) 
                 {
                      // Get number of effect parameters from Text effect
                      ERR(Suites.StreamSuite2()->AEGP_GetEffectNumParamStreams(effectH, &num_paramsL));
  
                      for (jL = 1; jL < num_paramsL; ++jL) // start at 1 to skip initial layer param
                      {          
                           ERR(Suites.EffectSuite3()->AEGP_GetEffectParamUnionByIndex(g_PluginID, effectH, jL, &param_type, &param_union));
                           switch (param_type)
                           {
                           case PF_Param_POPUP:
                                break;
                           case PF_Param_SLIDER:
                                break;
                           case PF_Param_COLOR:
                                break;
                           case PF_Param_CHECKBOX:
                                break;
                           default:
                                break;
                           }
                      }
                      ERR2(Suites.EffectSuite2()->AEGP_DisposeEffect(effectH));
  
                      break;
                 }
            }
       }
  

  In the SDK document, it indicates the value of PF_ParamDefUnion should not be used.

  So, how can I get these params in the effect, I put (the green line on the photo)?

  And, if there is any harm in my logic, please let me know.

  Thank you.

  > How do I know what setting is pop-menu, checkbox, or difficulty slider? (You can see the green line in the picture).

  I now just how to get the stream parameter type (type of AEGP_StreamVal: AEGP_OneDVal, AEGP_ColorVal etc.). Pop-up menu, checkbox or fix cursor parameter streams have the same type of workflow: AEGP_OneDVal.

  How to control parameter type you already posted in your code).

  > Shouldn't use a loop to get all the params?

  I also use this loop...

  > Could you please tell more in detail how to use it?

  I don't know what you want to do... I can't say more as written in the SDK.

• [LV-> TS] How to run a SEQ file, get the result (PASS/FAIL) and the report file?

  Hello

  I'm looking for the most obvious and simple, LabVIEW:

  1. start the motor Teststand: FACT

  2. get a list of SEQ files to run: FACT

  3 - loop through the list to run each file follows:<- found="" some="" examples="" but="" i="" have="" some="" trouble="" with="" the="" uimessage="">

  http://zone.NI.com/reference/en-XX/help/370052N-01/tsexamples/infotopics/executing_sequences_using_a...

  4. get the result of the execution of the SEQ:<->

  5 retrieve the XML + name of the generated report file path:<- obviously="" not="">

  http://digital.NI.com/public.nsf/allkb/3D3B2358DF9B786B8625789500549A3B

  http://forums.NI.com/T5/NI-TestStand/getting-report-file-path-location-at-execution-in-TestStand-201...

  Here's my current implementation:

  

  David Koch

  
  

• How to get the parameters of the selected time of the device?

  Hello!

  I have a few small projects and get the user settings, including Date/time (Options - Date/time). I need to get the information about the Format of the time and time zone (GMT) selected.

  How can I do this?

  Get an instance of the calendar, call Calendar.getTimeZone (). It is covered in the javadocs.

  See timezone and calendar.

  See also DateFormat.formatLocal)

• Try to use casStubs.jar classes and get the parameters of the analysis

  I went into class files available in casStubs.jar and was trying to come up with a script in the AppConfig.xml to connect to the CAS server and get the State of analysis and measures. I tried this option because the com.endeca.eac.toolkit.component.cas.ContentAcquisitionServerComponent class gives me these features.
  
  + < id script = "CheckCrawlStatus" > +.
  + < bean-shell-script > <! [CDATA [+]
  
  Import javax.xml.namespace.QName;
  com.endeca.cas.wsdl import. *;
  
  
  final String wsdlUrl = "http://" "${cas.host} '+': ' + ' ${cas.port} ' + ' / case? WSDL "; +
  final name of QName = new QName ("http://endeca.com/itl/cas/2010-07", "CasCrawlerService");
  CasCrawlerServiceLocator service = new CasCrawlerServiceLocator (wsdlUrl, name);
  CasCrawler robot = service.getCasCrawlerPort ();
  
  String crawlName = "myFirstCrawl";
  CrawlId crawlId = new CrawlId (crawlName);
  
  Metric [] metricArray = crawler.getMetrics (crawlId);
  + / / rest of the code to retrieve the crawl settings.
  
  +] > < / bean-shell-script > +.
  + < /script > +.
  
  Unfortunately, I still get connection refused to exception: ' java.net.ConnectException: connection refused ". My wsdl case load properly in my browser.
  Any ideas on gaps in the code or the missing configuration in the CASE or DT or platformservices?
  
  Thank you
  Dev

  Try to explicitly set endpoint to service before obtaining the port. So, if you connect to localhost:8500:

  service.setCasCrawlerPortEndpointAddress ("http://localhost:8500/AR"); ")

  You can substitute your host/port settings. This call is normally done through the box tool component wrappers, but since you are directly using the stubs of service, you will need to set the end point. Without this, the stubs use a test port that do not match your.

  Best
  Brett

• A 12 DIR EXE can get the parameters that is passed?

  I want to pass two parameters to my application DIR in the command line.

  Is this possible? What is the method or command?

  Thank you

  Jim

  the command line

  http://www.Director-online.com/dougwiki/index.php?title=Undocumented_Lingo#the_commandLine

• Synchronize the parameters passed to INdesign 2015?

  I was going to save my indesign settings in order to reset my preferences and I can't reset all my shortcut keys.  No idea why the sync settings are not found?  Did take it?

  Settings for synchronization (in InDesign CC and CC 2014) was temporarily interrupted while it is start rewritten (we hope). It was designed to pass parameters from a single workstation to another.

  However, if you want to bring into your hotkeys since InDesign CC or CC 2014, the Edit > command to migrate previous local parameters should always work.

• Workflow started by the script fails to get the parameter passed securestring

  Hello

  I use a script (linux) to start a workflow ( defined by software for the script ;-) thank This mechanism works very well.

  However, yesterday we removed an input parameter in a workflow of some (and also deleted from the script) and now it fails.

  Before the change, the input parameters were: vmName (String), vmUser (String), vmPassword (SecureString)

  After the change, the input parameters are: vmName (String), vmPassword (SecureString)

  In the script, I can add statements to prove that the password has a value and that it is past.

  In the workflow, I've added a task containing a script that is executed first and shows that the value of the vmPassword input parameter is empty.

  The output xml from script of appeal shows also that the value parameter is 'lost '...

  See the definition of setting correct for vmName on lines 11 and 12.

  See a definition of parameter incorrect for vmPassword on line 13 - the part missing "secret < SecureString > < \SecureString >...

  <?xml version="1.0" encoding="UTF-8" standalone="yes"?>
  <workflow-execution  href="https://ehc3-vco2.ehc.ssev.local:8281/vco/api/workflows/fe59b484-ec21-4028-8a32-5e434b4139c2/executions/ff8080814e0272b6014eadc7c37424fb/">
  <relations>
  <link href="https://ehc3-vco2.ehc.ssev.local:8281/vco/api/workflows/fe59b484-ec21-4028-8a32-5e434b4139c2/executions/" rel="up"/>
  <link href="https://ehc3-vco2.ehc.ssev.local:8281/vco/api/workflows/fe59b484-ec21-4028-8a32-5e434b4139c2/executions/ff8080814e0272b6014eadc7c37424fb/" rel="remove"/>
  <link href="https://ehc3-vco2.ehc.ssev.local:8281/vco/api/workflows/fe59b484-ec21-4028-8a32-5e434b4139c2/executions/ff8080814e0272b6014eadc7c37424fb/logs/" rel="logs"/>
  <link href="https://ehc3-vco2.ehc.ssev.local:8281/vco/api/workflows/fe59b484-ec21-4028-8a32-5e434b4139c2/executions/ff8080814e0272b6014eadc7c37424fb/state/" rel="state"/></relations>
  <id>ff8080814e0272b6014eadc7c37424fb</id>
  <state>failed</state>
  <input-parameters>
  <parameter type="string" name="vmName" scope="local">
  <string>vm093</string></parameter>
  <parameter type="SecureString" name="vmPassword" scope="local"/></input-parameters>
  <output-parameters/>
  <start-date>2015-07-20T19:23:46.932-04:00</start-date>
  <end-date>2015-07-20T19:23:48.070-04:00</end-date>
  <started-by>[email protected]</started-by>
  <name>Add Agent</name>
  <content-exception>; nested exception is:
          java.io.IOException: java.io.IOException: Non nillable element 'password' is null. (Dynamic Script Module name : addAgent#32)</content-exception>
  <current-item-display-name>Add Agent</current-item-display-name></workflow-execution>
  
  

  Anyone seen elsewhere and - especially - able to fix it? :-)

  Thank you

  Ed

  It turns out that, in the XML input, which is passed to the server vCO, the password parameter type spec can be , but the definition of its value must be specified using ....

  For example:

                  
                          secret
                  
  

  Lesson learned...

  Ed

• Hide the parameters passed on the way

  I use the anchor tag to navigate from one page to another. I am passing parameters to the page via the anchor so tag. That is, < a HREF = "test.cfm? Param1 = Yes & Param2 = No. "> edit < /A >"
  
  Is it possible to do without showing the settings of the path displayed in the browser?

  Nope

• Get the parameters of the CS6 application interface.

  Hi all

  I'm developing an extension for Photoshop CS6. I need to change the theme so that it matches the theme of Photoshop. I mean, if a user changes the configuration interface of Photoshop to Edit-> Preferences-> Interface, so I need to change the theme settings for my Panel too, similar to the way that the native panels behave. Here is a screenshot to explain better,

  

  I know it's possible. Please guide me in the right direction.

  Thank you!

  All you have to do it is during the application initialization (before creationComplete, if you bind the UI variables to the skin conditions and want to set up this way), just take the HostEnvironment (CSInterface.instance.hostEnvironment). The environment was a member of appSkinInfo that allows you to initialize the app I hope this helps!

• Print/export the parameters passed to the report

  Hi all
  
  I have a report on the EMP table. I have spend deptno parameter to run the report. On the report, I can show this past in the Deptno and Deptname settings as text elements. If I print or export this report as csv, it does not include the elements of the setting. Is there anyway to include in printing and exporting on the top of the report?
  
  Thank you
  Zahid

  Zahid:

  You can try the 'custom export' method described here

  Re: Export to excel from the output of a process of pl/sql

  You will need to edit the pl/sql code a bit to write additional information you want, written in the csv file.

  CITY

• ADF: How to print the query and the query passed into the class executeQueryForCollection methof impl VO parameters.

  Hello

  Kindly let me know how to print the query, and the parameters passed to it? I tried with the params parameter in super.executeQueryForCollection (qc, params, noUserParams); but could not succeed.

  I need save the query and the parameters passed to it. Kindly help.

  Thanks in advance,

  Kalpana.

  Here you go

  Coding with Passion: Oracle ADF - Debug Mode object query with parameters

• How to get the list of parameters of a stored procedure in Oracle?

  I'm calling an Oracle stored procedure and use the OCIBindByPos for each parameter.
  Example:
  

  /* Do the bind for date, using OCIIOV */
  OCIBindByPos (stmthp, &bindhp2, errhp, 2, (void *)&bvec[0], 
                sizeof(buf_1[0]), SQLT_STR, 
                (void *)inddate, (ub2 *)alendate, (ub2 *)rcodedate, 0,
                (ub4 *)0,  OCI_IOV);

  In this case, its necessary for a list of the parameters of the stored procedure, information such as type and the input/output parameter, etc.
  
  I can get the parameters of a stored procedure using the DESCRIBE statement.
  Example:

  SQL> DESCRIBE SP_GETCITIES
  PROCEDURE SP_GETCITIES
   Argument Name                  Type          In/Out Default?
   ---------------------- --------------------- ------ --------
   STATE_KEY              VARCHAR2               IN
   FECHA                  DATE                   IN
   RC1                    REF CURSOR             OUT
  
  SQL>

  Is there a better way to get the name, type, input/output for each parameter of an Oracle stored procedure, using the BEAK?
  
  Best regards.
  
  Antonio García (Mexico)

  Hi Antonio,.

  Take a look at "Describing metadata schema" in the programmer's Guide. He has this kind of information, which may be enough to get you going in the right direction. The guide is here:

  http://download.Oracle.com/docs/CD/E11882_01/AppDev.112/e10646/oci06des.htm#i446492

  In particular, see the code example in the section "describing the stored procedure.

  Kind regards

  Mark

• BlackBerry WebWorks app via a URL with the parameters of launch?

  I have an application of WebWorks I want to start with a URL to the browser and pass parameters to query URL to the application in this way. Is this possible? How? I would be happy to use HttpFilterRegistry or API call, but I don't see how to use these approaches to get my WebWorks App settings, even if I write a custom extension. Example of code would be very useful, especially to consume the parameters. Or at least an indication of which API (s) for this.

  This should be supported by the framework. What I would like to recoemmend is simply invoke the application according to the normal and placing the parameters in the URL to the standard '&' "?" rating.

  Then take advantage of the class UTIL. JS out of the parameters passed required...

  https://bdsc.webapps.BlackBerry.com/HTML5/APIs/BlackBerry.utils.URL.html

  (If you need help, citing the app, it is done as invoke any other java application on the device)

  R