Workflow started by the script fails to get the parameter passed securestring

Similar Questions

• How the parameter passes the dynamically personalized Planner

  Hello
  
  I'm new to IOM.
  Need your help passing parameters dynamically to the personalized Scheduler.
  
  I created Planner customized by providing support for the task.
  I recorded the plugin via API, using the PlatformService.registerPlugin () method.
  
  I need to send the parameters of this CustomScheduler, so I defined in the metadata (CustomScheduleTask.xml) as a file below and get it imported in DB
  using the script weblogicImportMetadata.sh by providing the path of the file.
  
  < scheduledTasks xmlns = "http://xmlns.oracle.com/oim/scheduler" >
  
  < task >
  
  < name > CustomScheduleTask < / name >
  
  org.schedule.custom.task.CustomScheduleTask < class > < / class >
  
  < Description > details the user_id data extraction < / description >
  
  < retry > 5 < / re >
  
  < Parameters >
  < string-required param = 'true' helpText 'Username' = > user name < / param-string >
  
  < / Parameter >
  
  < / task >
  
  < / scheduledTasks >
  
  IAM able to import this plugin as well as the register the plugin successfully. Now, I set a task to which this Custom Tachesplanificateur is mapped.
  Now, in order to run this job (scheduled task), I need to provide the user name (or id) which must be sent as a parameter for the Scheduler must be running.
  But when you set the task with this scheduled task on the IOM console, I was not able to define or to pass parameter to this work. Therefore, the parameter is null in
  CustomSchedule execute method.
  
  Kindly help me how to pass the parameter dynamically during execution of the Task Scheduler console of IOM so that the execute method would be able to receive it.
  
  Thank you in advance.
  
  Kind regards
  Kumar

  Hello

  When you created the schedule the job for your personalized planning task, you should see your login name of textfield in the scheduled task. If this isn't the case, then it check your xml task calendar.

  In your class calendar code, add:

  public void execute (HashMap arg0) {}
  Final string METHOD_NAME = ' run: '; "
  Logger.Debug (CLASS_NAME + METHOD_NAME + "Input method - run");
  try {}

  String LoginName = arg0.get ("username");

  Kind regards
  Sunny

• Value of the parameter after throwing a custom exception

  I have a procedure that has a type as a parameter to record input/output. I just get a recording member, read a description depending on whether the value of an array and assign this description to another Member of the record. I use this description where I call the procedure.
  
  The problem is; When I up a custom in this procedure, the value attribute that exception is lost so I can't use it. How can I solve this problem?
  
  Example:
  
  CREATE OR REPLACE PACKAGE IN THE PCKG_TEST
  REC (RECORD TYPE IS
  A TANK,
  B VARCHAR2 (24).
  C NUMBER);
  
  WITH SOME EXCEPTIONS;
  
  (MANIPULATION) PROCEDURE
  r IN OUT REC
  );
  
  END PCKG_TEST;
  
  CREATE OR REPLACE PACKAGE BODY PCKG_TEST AS
  (MANIPULATION) PROCEDURE
  r IN OUT REC
  ) AS
  BEGIN
  
  r.A : = « Y » ; -< assignment is lost when the exception is thrown.
  
  IF RA = 'Y' THEN
  RAISE THE EXC;
  END IF;
  
  END;
  
  END PCKG_TEST;
  
  ----------------------------------
  
  DECLARE
  R PCKG_TEST. REC;
  BEGIN
  
  BEGIN
  R.A : = « A » ;
  PCKG_TEST. MANIP (R);
  EXCEPTION
  WHEN PCKG_TEST. EXC THEN
  DBMS_OUTPUT. PUT_LINE (' 2 A :'||) R.A); -< Here is 'A' no 'Y '.
  LIFT;
  WHEN OTHERS GO BACK THEN;
  END;
  
  EXCEPTION
  WHEN PCKG_TEST. EXC THEN
  DBMS_OUTPUT. PUT_LINE (' 3 A :'||) R.A);
  LIFT;
  WHILE OTHERS THEN
  RETURN;
  END;

  user11701280 wrote:
  The problem is; When I up a custom in this procedure, the value attribute that exception is lost so I can't use it. How can I solve this problem?

  The problem is because, by default, oracle goes in most of the values by copying them, so when an exception occurs the last part of the procedural process that copy of back again once does not.

  To specify in the case otherwise you can use the NOCOPY statement within your parameters, which will lead to any change in the procedure to have a direct effect on the parameter passed in with the parent...

  SQL> ed
  Wrote file afiedt.buf
  
    1  CREATE OR REPLACE PACKAGE PCKG_TEST AS
    2    TYPE REC IS RECORD (
    3      A CHAR,
    4      B VARCHAR2(24),
    5      C NUMBER);
    6    EXC EXCEPTION;
    7    PROCEDURE MANIP(r IN OUT NOCOPY REC);
    8* END PCKG_TEST;
  SQL> /
  
  Package created.
  
  SQL> ed
  Wrote file afiedt.buf
  
    1  CREATE OR REPLACE PACKAGE BODY PCKG_TEST AS
    2    PROCEDURE MANIP(r IN OUT NOCOPY REC) AS
    3    BEGIN
    4      r.A := 'Y'; -- /
  
  Package body created.
  
  SQL> DECLARE
    2    R PCKG_TEST.REC;
    3  BEGIN
    4    BEGIN
    5      R.A := 'A';
    6      PCKG_TEST.MANIP(R);
    7    EXCEPTION
    8      WHEN PCKG_TEST.EXC THEN
    9        DBMS_OUTPUT.PUT_LINE('2A:'||R.A); --< Here A is 'A' not 'Y'
   10        RAISE;
   11      WHEN OTHERS THEN RETURN;
   12    END;
   13  EXCEPTION
   14    WHEN PCKG_TEST.EXC THEN
   15      DBMS_OUTPUT.PUT_LINE('3A:'||R.A);
   16      RAISE;
   17    WHEN OTHERS THEN
   18      RETURN;
   19  END;
   20  /
  2A:Y
  3A:Y
  DECLARE
  *
  ERROR at line 1:
  ORA-06510: PL/SQL: unhandled user-defined exception
  ORA-06512: at line 16
  SQL>
  

• By using the parameter as a column in a select statement inside the stored procedure.

  I'm doing a variation of what follows. Can someone tell me how to use the parameter passed in the IN clause correctly? Thank you
  

  drop table test1;
  drop table test2;
  
  CREATE TABLE TEST1
  (
    COL1  NUMBER
  );
  
  CREATE TABLE TEST2
  (
    COL2  NUMBER
  );
  
  insert into test1 values (1);
  insert into test2 values (1);
  
  commit;
  
  create or replace  procedure test_sp (col_name varchar2)
  as
  
  var1 number;
  begin
  
  select col1 into  var1 from test1 where col1 in (select col_name from test2);
  
  end;
  
  exec test_sp ('COL2');

  Deleted table.
  Deleted table.
  Table created.
  Table created.
  1 line of creation.
  1 line of creation.
  Validation complete.
  Created procedure.
  BEGIN test_sp ("COL2"); END;
  Error on line 29
  ORA-01722: invalid number
  ORA-06512: on-site ".» TEST_SP', line 7
  ORA-06512: at line 1

  You must use dynamic sql statements:

  SQL> drop table test1;
  
  Table dropped.
  
  SQL> drop table test2;
  
  Table dropped.
  
  SQL> CREATE TABLE TEST1
    2  (
    3    COL1  NUMBER
    4  );
  
  Table created.
  
  SQL> CREATE TABLE TEST2
    2  (
    3    COL2  NUMBER
    4  );
  
  Table created.
  
  SQL> insert into test1 values (1);
  
  1 row created.
  
  SQL> insert into test2 values (1);
  
  1 row created.
  
  SQL> commit;
  
  Commit complete.
  
  SQL> create or replace  procedure test_sp (col_name varchar2)
    2  as
    3  var1 number;
    4  begin
    5  execute immediate 'select col1 from test1 where col1 in (select ' || col_name || ' from test2)' into var1;
    6  end;
    7  /
  
  Procedure created.
  
  SQL> exec test_sp ('COL2');
  
  PL/SQL procedure successfully completed.
  
  SQL> 
  

  SY.

• How the parameter values can be passed to OBIEE reports of the user interface

  Hello
  
  Does anyone have an idea on how to pass parameters to the UI (user interface of a java application) to
  OBIEE report page. Based on the value of the parameter passed, the report page should be displayed for ex: the product
  name must be selected in the user interface, then the page of the report must show sales for this product
  Alone.can u please let me know how this can be achieved. Any help would be appreciated.
  
  Thank you
  Leela

  Hi Leela,
  What you're looking for can be accomplished with GO URL, see here:
  http://download.Oracle.com/docs/CD/E12096_01/books/AnyWebAdm/AnyWebAdm_APIWebIntegrate6.html#wp1005251

  Kind regards
  Alastair

  Published by: AlastairB_UK on October 26, 2009 15:27

• Start getting script error code 0/line48/tank 2 / failed to get the value of the application object of property is null or undefined

  whenever I start all the applications I get three error code of script, I was wondering how to stop this.

  Check if the following will help with your question.
  Open your Internet Explorer browser.
  Click on the menu 'tools '.
  Click on 'Internet Options '.
  Click on the "Advanced" tab
  Check the checkbox "disable the script debugger. It is located under the heading "Navigation".
  Uncheck the "display a notification of every script error".
  Click 'Apply' then 'OK '.
  Close Internet Explorer.
  Open Internet Explorer to make sure that the script errors are not displayed.

  Please reply back and let us know if this can help.

  Marilyn

• When I start my laptop script error on the screen.what that means and how it get rid you

  When I start my laptop SCRIPT ERROR comes on my screen. What it means and how to get rid

  You have assigned to a category of forum that is completely different to your question/problem. Your question has been moved to a forum category that matches it's better.

  If you don't already specify the product name, Windows version, version of the program and other necessary information on the product you have a problem with: do so immediately!
  And please explain the problem more in detail. Do not try to give an overall summary abstract with terms invention. Use natural language. Explain step by step what you do and what you see and why it is a problem.
  Provide accurate and complete data: exact error message of name, exact product of exact, exact file names, exact address... you get!

• Pagefile.sys has completely disappeared. It started when the power failed and my computer crashed.

  My pagefile.sys has completely disappeared. This all started when the power failed and my computer crashed.
  I get the message that he was away, I went to the performance and settings and tried to change custom settings & re-start.

  No matter what I do, nothing works. I lost several hours of visiting sites for tips and nothing seems to help.

  I was told when re-boots WinXP it creates the new file pagefile.sys and I should delete the pagefile.sys file may be corrupted on the C drive.

  So I put the folders to show hidden files and delete pagefile.sys. I have re-set and tried to recover with no success.

  There is now absolutely no pagefile.sys on my C drive. Anyone know how I can get back my pagefile.sys?

  I want to get my virtual memory works again?

  Thank you very much in advance!

  I'd start first with the chkdsk/r.

  Don't forget - if you have a factory installed recovery Partition, fixmbr will scan it as the Master Boot Record that written XP will equal not the MBR installed by the factory, so first run chkdsk /r (did I say that already)?

  Here are some instructions:

  http://pcsupport.about.com/od/fixtheproblem/SS/RCONSOLE.htm

  Where people have no XP bootable media, here are my instructions:

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that might have come with the acquisition of the system store.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  When you install ImgBurn, DO NOT install the Ask toolbar.

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.

  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Remove the CD, and then type "exit" to exit the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

• Lsass.exe - Unable to locate component. This application has failed to start because the oleaut32.dll file not found

  Original title: oleaut32.dll xp

  My system XP pro/sp3 does not start normally, without danger or with the original sys disk. I get a message
  Isass.exe - Unable to locate component. This application has failed to start because the oleaut32.dll file not found. reinstalling the application may fix this problem.
  However, I can't in the operating system to do a re-install.
  Any suggestions?

  If c:\windows\system32\oleaut32.dll is missing, you will see messages like this:

  Lsass.exe - Unable to locate component
  This application has failed to start because the OLEAUT32.dll file not found.  Reinstalling the application may fix this problem.

  If the missing file is the only problem, you might have to do a reinstall to fix.

  There should be a copy of Oleaut32.dll in the c:\windows\system32\dllcache folder, so if you can get in the XP Recovery Console, you can just replace it - then you are going to have to start on something to do.

  Once started in the XP Recovery Console, you must enter this command at the prompt:

  Copy c:\windows\system32\dllcache\oleaut32.dll c:\windows\system32

  If the file is not in the dllcache folder (it should really be), depending on your installation, this command can work:

  Copy c:\windows\servicepackfiles\i386\oleaut32.dll c:\windows\system32

  Answered in the affirmative if invited to replace any existing file.

  I don't know what the Microsoft Support Engineer think that KB307545 or KB922371 will help you.  I think that the MSE is just throw a few things to try and some links.  You don't describe symptoms consistent with the need to use one of these methods.   I would say the MSE has never seen this problem before, made no attempt to reproduce the problem, and has no idea how to fix this.

  If your CD does not start in the Recovery Console, or if you don't know what kind of CD do you have to do a CD of XP Recovery Console and boot on it (no media XP required).

  Here's how:

  Boot into the Recovery Console Windows using an XP bootable installation CD.

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that might have come with the acquisition of the system store.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  When you install ImgBurn, DO NOT install the Ask toolbar.

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  After replacing the file, remove the CD and type 'exit' to leave the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

• start the computer to start but stops at "failed to load the core file?

  Original title: how to get Windows XP to boot my computer from starting when starts but stops at "failed to load the core file?

  When I try to start my computer, it stops at "cannot load the kernel."  It will go no further. What is the solution?

  Please see: How to perform a Windows XP repair install

• I have a compaq presario cq60 with vista which was able to start after the installation of windows updates. HP recovery failed with error code 100a and bios self-test gave error fail #1-07. What can I do?

  I have a compaq presario cq60 with vista. Could not start after the installation of windows updates. HP recovery failed with error code 100a and bios self-test gave error fail #1-07. I took the hard drive and installed in my office. Windows Explorer displays the main and recovery partitions.

  The primary partition has the following folders (including hidden & system)

  The recovery partition has the following (including the language files more)

  Someone at - it ideas why my laptop does not work?

  Thank you

  Greg

  Hello

  You press F11 on startup with a HP Compaq to start the recovery process.

  For problems with the recovery process, you will need to contact HP.

  BIOS problems:

  There are messages for the HP Forums for posters with similar errors:

  http://h30499.www3.HP.com/T5/notebook-HP-ProBook-EliteBook/notebook-HDD-problems-TEst-status-1-07-fail/TD-p/658902

  http://h30499.www3.HP.com/T5/notebook-PCs-pavilions-Presario/HP-Pavilion-dv8000-getting-1-07-fail-error/TD-p/883284

  http://h30499.www3.HP.com/T5/notebook-PCs-pavilions-Presario/HP-Pavilion-notebook-dv6000-1-07-fail/TD-p/1069457

  All the answers it point to a drive about to fail

  See you soon.

• Im trying to find my windows oc disk and I keep getting an error shell excute ex failed; Code 87 the parameter is incorrect how can I solve this problem

  Im trying to get my disk of oc windows, and I get an error shell excute ex failed; Code 87 the parameter is incorrect. Please help me

  How can I solve this problem. Thank you.

  Hello

  You did it changes on the computer before the problem started?

  I suggest you perform a startup repair.

  See these articles for help:
  
  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-fix-a-boot-startup-problem

• "Error: the application failed to start because the side by side configuration is incorrect, please see the application event log or use the command-line sxstrace.exe for more details.

  I have QQ (an international chat program) installed on the laptop. Then my hard drive crashed. Now when I try to reinstall it on my new hard drive I get the following message:

  "Error: the application failed to start because the side by side configuration is incorrect, please see the application event log or use the command-line sxstrace.exe for details" -how can I solve this problem? I have Windows 7.

  Hello

  Thanks for choosing Microsoft Community to post your question.

  It seems that you can not install application QQ, you get an error: "the application could not start because the side by side configuration is incorrect, please see the application event log or use the command-line sxstrace.exe for more details.

  We're here to help and guide you in the right direction. This problem could be caused when the computer is missing the correct C++ run time for your type of system components. (x 86 or x 64).

  Here are a few troubleshooting steps that you can try to solve this problem.

  Method 1: we will install Microsoft Visual C++ for your computer package.

  Note: If you use the 32-bit operating system, download and install 32-bit edition(X86).

  If you use the 64-bit operating system, download and install edition(X64) 64-bit.

  Microsoft Visual C++ 2008 SP1 Redistributable Package (x 86)
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=A5C84275-3B97-4AB7-A40D-3802B2AF5FC2&displaylang=en

  Microsoft Visual C++ 2008 SP1 Redistributable Package (x 64)
   http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=BA9257CA-337F-4B40-8C14-157CFDFFEE4E&displaylang=en

  Package redistributable Microsoft Visual C++ 2010 (x 86)

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=a7b7a05e-6de6-4D3A-A423-37bf0912db84

  Package redistributable Microsoft Visual C++ 2010 (x 64)

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=bd512d9e-43c8-4655-81bf-9350143d5867

  Method 2: Run the fixit available at the following link.

  Solve problems with programs that cannot be installed or uninstalled

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  Also, check the event log using Event Viewer.

  Please see the link below for more information on how to use Event Viewer to check the error message or information,

  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  If you have additional problems, please reply to this post and we will be happy to help you further.

• vCenter Service was able to start with the error failed to create the front of SINGLE sign-on: vmodl.fault.SystemError

  Hello

  Can someone guide me how to solve this error? vCenter service is not getting started, I looked in the newspapers vpxd and found the following error.

  vCenter Service was able to start with the error failed to create the front of SINGLE sign-on: vmodl.fault.SystemError

  Thank you

  John

  Hi John,.

  This is due to host on the vCenter server entries. Please try the procedure below

  Connect to the vCenter server, edit the/drivers/etc/hosts file in Notepad

  C:\Windows\System32\drivers\etc\hosts

  # 127.0.0.1 localhost

  Note: If a line does not exist in the hosts file, add it at the end of the text.

  #) to remove the comment from the line of IPv4.

  1. 127.0.0.1 localhost
     ·  Save and close the file.
  • localhost127.0.0.1.
    • GoTo services.msc and start VMware Virtual Center Services.

  Thank you

  Venance

• Error: ORA-16757: failed to get the value of this property

  Hi all
  I have an error:
  DGMGRL > see the database dbname_stb LogXptStatus;
  Error: ORA-16757: failed to get the value of this property
  I check:
  DGMGRL > see the configuration;
  
  Configuration - dbname_dg
  
  Protection mode: MaxPerformance
  Databases:
  dbname_pr - primary database
  dbname_stb - physical of the standby database
  
  Fast-Start Failover: DISABLED
  
  The configuration status:
  SUCCESS
  
  drcdbname_stb.log:
  RSM0: Received the request the property Get: rid = 0 x 01010000, pid = 54
  2012-10-17 15:21:14.702 of database Resource: get the LogXptStatus property
  RSM 15:21:14.702 2012-10-17 error: trying to interview a 'LogXptStatus' primary type property on a standby database resource.
  2012 10-17 error 15:21:14.702 database resource GetProperty (16501,16757)
  
  I don't understand this error?
  Thank you all.

  Take a look on this

  Re: ORA-00254 | Trouble with dataguard