get the rather specific County total

Similar Questions

• Query to get the difference between 2 totals of 2 different queries

  I wanted to know if it is possible to get the difference between 2 totals of 2 different queries. Let me explain with an example:

  1 application of^st - sum (homepass) Select table 1

  2^th query: select sum (homepass) from table2

  Is it possible to display the difference as -

  Select sum (homepass) in table 1 - sum (homepass) from table2

  I know that the above query would give syntax error, but is there a better way or something to get the above done task from a single query.

  
  

  Hopefully, my question is clear.

  
  

  Please get back with the answer to my query.

  
  

  Concerning

  You can always do something like

  SELECT a.cnt - b.cnt
  FROM (SELECT sum(homepass) cnt from table1) a,
        (SELECT sum(homepass) cnt from table2) b
  

  I'd be somewhat dubious, although on a data model that had two tables with the same name of the column where it really made sense to subtract one amount from each other.  This would strongly imply that there should be a single table with an additional column TYPE eventually.

  Justin

• Nb505 - where to get the product specifications

  It is very difficult, if not impossible to find the specifications (sometimes called 'Key features') for Toshiba products. For example, I try for more than 5 hours through all the websites of Toshiba to know the main characteristics of a mini NB505 laptop model. I walked into the family, the model, the serial number as exactly written on the device, such as given by the Properties window & case
  computer device tab and I always get the message "you search revealed 0 results.»

  Can any body tell me where & how to get information from Toshiba (specifications) products need to know before buying the product?

  Thank you.

  Hello me,.

  What information product you want exactly? In addition, it seems strange for me because you wrote that you have the serial number, so I guess that you already NB505 but now looking a few specifications?

  The NB505 is an American model and you can find it on the Toshiba U.S. page:
  http://us.Toshiba.com

  If you do a Google search for NB505 the first result I get is Toshiba NB505 product page:
  http://us.Toshiba.com/computers/laptops/mini-notebook/NB500

  So I t understand how it of possible to search for more than 5 hours

• How can I get the control specifies a reference (by the script)?

  By what method of property can I control that specifies a reference? (See an example of a reference to the code snippet).

  

  When I reference (ControlReferenceConstant in the script), I can't get control of the reference points to. I guess it's done with the property ' reference control bound to. " But I don't know how to convert the variant to the control. Conversion to the control class does not work. (See excerpt below). Conversion does not return an error, but the reference is not valid.

  

  A few details: the variant contains a reference to a control and has a name matching [2]. The type of reference data is just as well [3]. But the reference is 0, which is of course invalid digital show (seen in the probe and indicator).

  An entire book would be to iterate through all controls (indicators included as well as items in clusters and berries). The label could be the first check. But because they do not have to be unique is not enough. As a second step could be verified that the ReferenceConstant is listed by the property "nodes of control."(delede contrôle) reference ".

  [1] LV12 helps ControlReferenceConstant properties:

  http://zone.NI.com/reference/en-XX/help/371361J-01/lvscript/controlreferenceconstant_p/

  [2] get the variant name with:

  Select 'Type of Show' in the context menu of indicator varying or

  OpenG VI 'get name of data '.

  NIs in \Utility\VariantDataType\GetTypeInfo.vi VI

  [3] get the Refnum Type in the variant with

  NIs in \Utility\VariantDataType\GetRefnumInfo.vi VI

  If you look at using the property, you will see that it actually returns the data type of the node, not the actual control. That's way, you cannot use the reference in variant - it's not a real reference to a control.

  I think it's all just an oversight that no one added to the relevant property to the node, but there is a simpler solution for you that I think should work, that should come to him on the other side - for each control in the public Service, get the property [] of control reference nodes and it look for the reference of your node. If you found it, the node made reference to this control.

• How get the implementation specific bail?

  Hey...

  Advisory ID: cisco-sa-20090408-asa describes a vulnerability that applies to an ASA 5520 I administer.

  The Advisory page, http://www.cisco.com/warp/public/707/cisco-sa-20090408-asa.shtml, says:

  8.0 (4) 25: first, corrected version

  8.0 (4) 28: recommended version.

  But the interim software download page is confusing. There is a version 8.0.4.23, released February 4, 2009, but this version does not correct the problem. There are a 8.0.4.3 version, but the release date, 11-SEP-2008, is present in the past.

  To v8.1.

  8.1 (2) 15: first fixed

  8.1 (2) 19: recommended.

  But on the intermediate software download page, the latest version is 8.1.2.13 (February 4, 2009).

  I support contracts which are to be renewed, so if I need TAC for this, I'll have to wait.

  Is there another place to find the versions specified in the notice?

  TIA...

  It is difficult to find a reason, but its in the notice:

  "Fixed Cisco ASA software is available for download on:

  http://www.Cisco.com/pcgi-bin/tablebuild.pl/ASAPSIRT

  Software Cisco PIX fixed can be downloaded from:

  http://www.Cisco.com/pcgi-bin/tablebuild.pl/PIXPSIRT

  "

• Unable to get the total number of records processed by the processor of trade rules

  Details of the environment

  ======================

  Disqualification Version: 12.1.3.0.0

  
  

  I use a business rules processor to implement multiple business rules on one record and I am looking for a summary of the number of records increased and does not have a specific rule.

  
  To illustrate:
  Suppose there are 2 rules, invalid number in Column1 and valid number on Column2.
  10 records to process and 3 folders don't rule 1 (valid on column1) and 9 entered failure of rule 2 (valid number on Column2).

  In the browser of result of the processor Business, the number of past records and failed is displayed but is not part of the output of the processor itself. In the example above, there will be 1 pass and 9 fail records and given the values of said the total number of records can be derived which is 10.

  This is why the expected output will be:
  Success of failure
  Rule 1:7 (10-3) 3
  Rule 2: 1 (10-1) 9
  Note: The number of records that failed can be derived from the table of the rule ID but I don't know how to get the total number of records in order to calculate the number of records that a given rule.

  I tried to publish the County of acceptance and rejection in the browser of result of the processor Business in an intermediate table and ask the same intermediate table to get the pass and fail values but Disqualification does not allow to write and read the same intermediary object in a single process. What is the best way to get the number of records total handled by the processor business rules? This kind of attributes (that do not exist only in the browser of result) can be included in the output of the processor in the next version of the Disqualification?

  In addition, the intermediate table contains only 1 sheet with pass and failure values while the exceptions which have individual failure on each rule contains 12 Archives. What would be the best approach to merge a single record into multiple records according to the example below?

  Staging table
  Success of failure
  1 9

  Exception table
  Single ID ID rule
  Rule 1 Record1
  Rule 1 Record2
  Rule 1 record Record3
  Rule 2 Record1

  Exception table with: staging Table data merge
  Rule ID ID Unique Pass Fail Total
  Rule 1 1 9 10 Record1
  Rule 1 1 9 10 Record2
  Recording rule 1 Record3 1 9 10
  Record1 rule 2 1 9 10
  
  Please notify.

  Hi Jason,

  The best way to explain how to do this is with an example project (DXI). I'll send you one in offline mode.

  -Mike

• FO syntax to get the number of Total pages

  Hello
  
  In my report, I want to display number of page to Page x of Y.
  I use the FO syntax <? fo:page - number? >. This will give you the Page number, I want the Page as well as this Total number.
  I tried with <? fo:page - number-citation? >, but it does not work. I'm looking for the syntax of xsl, not MS Word page number property
  
  Please help me...

  Hello

  You can use the following syntax to get the number of Pages Total.

  Kind regards
  Parth

• Get the participant of the current call

  I want to get the participant, specifically the name from an incoming call (if the number is stored in the local address book).
  The only way I see to get the name is to look at the call log. It seems that the current call is added only after he's finished well.
  It seems not possible to search for a number using BlackberryContactList, because need names for the entry.

  Any ideas?

  Probably not the cleanest because I didn't spend too much time on this, but I think that's what you're looking for:

  Place in the earpiece of your phone callConnected method

  //incomingcall: static boolean variable set to true during a callIncoming event
          if(incomingcall)
          {
              PhoneCall pc = Phone.getActiveCall();
  
              String number = pc.getDisplayPhoneNumber();
  
              //getDisplayPhoneNumber() method returns a label as well as the number
              //if caller is a contact, these lines will parse it.
              number = number.substring(number.indexOf(' '));
              number = number.trim();            
  
              try{
                  BlackBerryContactList bbcl = (BlackBerryContactList)PIM.getInstance().openPIMList(PIM.CONTACT_LIST,PIM.READ_ONLY);
                  Enumeration enumerate = bbcl.items();
  
                  //iterate through contacts
                  while(enumerate.hasMoreElements())
                  {
                      Contact c = (Contact)enumerate.nextElement();
  
                      PIMList pimlist = c.getPIMList();
                      int[] intarray = c.getFields();
  
                      for(int x = 0; x < intarray.length; x++)
                      {
                          if (pimlist.getFieldDataType(intarray[x]) == PIMItem.STRING) {
                              if(intarray[x] == c.TEL)
                              {
                                                                  for(int y=0; y < c.countValues(Contact.TEL); y++)
                                  {
                                      //see if opened contact matches the number
                                      if(c.getString(Contact.TEL, y).equals(number))
                                      {
                                          //Caller's name stored in namearray
                                          String[] namearray = c.getStringArray(Contact.NAME,0);
                                      }
                                  }
                              }
                          }
                      }
                  }
              }
              catch(PIMException e) {}
  
              incomingcall = false;
  

  EDIT: Keep in mind that this is probably not very effective, since it will iterate through EACH issue of EACH contact.

  Another thing to note is that some fields (work2, home2) were not supported and are not accessible until 4.5 so if the number is stored in these areas, you cannot get the name of the contact with this method.

• SUM on &amp; Partition BY... Try to get the correct total run.

  running: Oracle XE 11
  

  
  

  Hi all, I am using the analytical function of PARTITION BY to get my total race for a report. (in this case the bank balance)

  
  

  SUM (bank_stmts.amount) OVER (PARTITION BY bank_stmts.account_ID ORDER BY bank_stmts.tx_date, bank_stmts.id)

  
  

  I add a balance initial in the table at the beginning of the year, and everything works fine when I select on the recordings of the whole years...

  
  

  However, I need to interview a subset of the report, i.e. one month, or a selection of documents, rather than year-round. But I still want to see the total calculated for the whole year on the report, not a total operating for the subset of records. I'm not sure how to do that because when I select a subset, it totals only the subset...
  

  
  

  I see that there are a number of clauses on the analytical function, especially BETWEEN the LINES or RANGE, but my assumption is that these still only works on surveyed lines and not any of the table...

  
  

  My way of thinking for the moment, is that patients have to calculate and enter the total in the table when the row is inserted, probably via a trigger. However, I didn't keep far from...

  
  

  Kind regards

  Richard
  

  SQL > with t as)
  2. Select ename,
  3                     job,
  4 hiredate,
  5 sum (sal) over (partition by deptno arrested by hiredate) running_total_sal
  6 of PEM
  7            )
  8 select
  9 t
  10 order by hiredate
  11.

  HIREDATE RUNNING_TOTAL_SAL EMPLOYMENT ENAME
  ------ --------- --------- -----------------
  SMITH, CLERK DECEMBER 17, 80 800
  ALLEN SALESMAN FEBRUARY 20 81 1600
  WARD 22 FEBRUARY SALESMAN 81 2850
  MANAGER OF JONES 2 APRIL 81 3775
  BLAKE MANAGER MAY 1, 81 5700
  CLARK MANAGER JUNE 9, 81 2450
  SELLER OF 7200 08 - SEP - 81 TURNER
  MARTIN SELLER 28-SEP-81 8450
  PRESIDENT KING NOVEMBER 17 81-7450
  JAMES CLERK 9400 3 DECEMBER 81
  DECEMBER 3, 81 FORD ANALYST 6775

  HIREDATE RUNNING_TOTAL_SAL EMPLOYMENT ENAME
  ------ --------- --------- -----------------
  MILLER COMMITTED JANUARY 23, 82 8750
  SCOTT, ANALYST APRIL 19 87 9775
  ADAMS, CLERK MAY 23, 87 10875

  14 selected lines.

  SQL > with t as)
  2. Select ename,
  3                     job,
  4 hiredate,
  5 sum (sal) over (partition by deptno arrested by hiredate) running_total_sal
  6 of PEM
  7            )
  8 select
  9 t
  10 where hiredate > = date ' 1981-01-01'
  11 and hiredate<  date="">
  12 order by hiredate
  13.

  HIREDATE RUNNING_TOTAL_SAL EMPLOYMENT ENAME
  ------ --------- --------- -----------------
  ALLEN SALESMAN FEBRUARY 20 81 1600
  WARD 22 FEBRUARY SALESMAN 81 2850
  MANAGER OF JONES 2 APRIL 81 3775
  BLAKE MANAGER MAY 1, 81 5700
  CLARK MANAGER JUNE 9, 81 2450

  SQL >

  SY.

• to get the total general

  Hello

  I have an example of a query like this, can't expose the names of actual table I have security problems.

  Select empno, count (empno) in the emp_table1 where certain conditions

  Union of all the

  Select empno, count (empno) in the emp_table2 where certain conditions

  Union of all the

  Select empno, count (empno) in the emp_table3 where certain conditions

  Union of all the

  Select empno, count (empno) in the emp_table4 where certain conditions

  I get the result as below, no matter what.

  Output

  ----------

  EmpNo County

  ----------------------

  Emp1 15

  EMP2 12

  Emp3 10

  EMP4 6

  Emp5 4

  emp6 7

  emp7 12

  emp8 14

  but finally, I should get a special register, displaying the total general as

  emp_total 80

  How can get this.please provide

  Since I don't have access to your data, a simple way to show CUMULATIVE would be this.

  WITH T1 (C1, C2) AS)

  SELECT "emp1", 15 OF DOUBLE UNION ALL

  SELECT "emp2", 12 OF DOUBLE UNION ALL

  SELECT 'emp3', 10 OF DOUBLE UNION ALL

  SELECT "emp4", 6 OF DOUBLE UNION ALL

  SELECT "emp5", 4 OF DOUBLE UNION ALL

  SELECT 'emp6', 7 OF DOUBLE UNION ALL

  SELECT 'emp7', 12 OF DOUBLE UNION ALL

  SELECT 'emp8', 14 FROM DUAL)

  SELECT NVL(C1,'EMP_TOTAL'), SUM (C2)

  FROM T1

  ROLLUP GROUP (C1);

  OUTPUT:

  Emp1 15

  EMP2 12

  Emp3 10

  EMP4 6

  Emp5 4

  emp6 7

  emp7 12

  emp8 14

  EMP_TOTAL 80

• How to get the total line count COUNT (*) SELECT and put on a page?

  Hello
  
  I use JDeveloper 10.1.3.4. I need get the total number of rows in a table and display it on a page and the problem in doing so. At the sqlplus prompt the row count simply would be, for example:
  

     select count(*) from BILL;

  I wonder if having this simple number must be so complicated and if there is more simple, better ways. Here's how I do it and the problem encountered.
  
  1. the name of the page to display the number is summary.jspx. It has a grain of support that "summed" as the managed bean name in faces - config.xml, and the name of the bean class is "summary." The component output on the page is:
  

  <h:outputText value="#{summary.totalStudentsCount}"
                binding="#{summary.outputText5}" id="outputText5"/>

  2. in summary the bean code is:
  

      private Number totalStudentsCount;
      public static int NUMBER = Types.NUMERIC;
  
      public void setTotalStudentsCount(Number totalStudentsCount) {
          this.totalStudentsCount = totalStudentsCount;
      }
  
      public Number getTotalStudentsCount() {
          ZBLCModuleImpl zblcam = getZBLCModuleImpl();
          LoggedInStudentImpl studentTable = (LoggedInStudentImpl)zblcam.getLoggedInStudent();
          String sql = "select count(lsap_uid) from BILL";
          studentTable.setQuery(sql);
          return (Number)CallStoredFunction(NUMBER, "get_total_students(?)", new Object[] {});
      }
  
      private ZBLCModuleImpl getZBLCModuleImpl() {
          FacesContext fc = FacesContext.getCurrentInstance();
          ValueBinding vb = fc.getApplication().createValueBinding("#{data}");
          BindingContext bc = (BindingContext)vb.getValue(fc);
          DCDataControl dc = bc.findDataControl("ZBLCModuleDataControl");
          ApplicationModule am = (ApplicationModule)dc.getDataProvider();
          return (ZBLCModuleImpl)am;        
      }
  
      protected Object CallStoredFunction(int sqlReturnType, String stmt, Object[] bindVars) {
          CallableStatement st = null;
          ZBLCModuleImpl zblcam = getZBLCModuleImpl();
          try {
              st = zblcam.getDBTransaction().createCallableStatement("begin ? := " + stmt + "; end", 0);
              st.registerOutParameter(1, sqlReturnType);
              if (bindVars != null) {
                  for (int z = 0; z < bindVars.length; z++) {
                      st.setObject(z + 2, bindVars[z]);
                  }
              }
              st.executeUpdate();
              return st.getObject(1);
          }
          catch (SQLException e) {
              throw new JboException(e);
          }
          finally {
              if (st != null) {
                  try {
                      st.close();
                  }
                  catch (SQLException e) {
                      throw new JboException(e);
                  }
              }
          }
      }

  The idea of calling a stored function usnig as a "helper" method is 25.5.3 in the Developer's guide, which is closest to you in my need. It's for the functions with the one IN argument; but in my case, the function is not any argument IN. That's why, when you call the helper method CallStoredFunction(), I gave an empty as the last argument and amazing array that caused the problem:
  

  return (Number)CallStoredFunction(NUMBER, "get_total_students(?)", new Object[] {});

  3. the registered function has been tested and works fine at the sqlplus prompt:

  create or replace function get_total_students
     return NUMBER
  AS
     v_student_count NUMBER;
  BEGIN
     select count(ldap_uid)
     into v_student_count
     from bill;
     return v_student_count;
  END;

  4. when the summary.jspx page is run, the browser is full of error messages, the first long line is here (I have split several online for ease of reading):

  javax.faces.el.EvaluationException: 
    javax.faces.el.EvaluationException: 
      Error getting property 'totalStudentsCount' from bean of type 
      zblc.viewcontroller.backing.staff.Summary: oracle.jbo.JboException: 
        JBO-29000: Unexpected exception caught: 
          java.sql.SQLException, msg=Missing IN or OUT parameter at index:: 2

  Thus,.
  (1) what is the problem? What is this parameter IN or OUT of {color: red} index: 2 {color} consult? It has to do with the empty array as the last argument in the call to the helper method?
  (2) this approach is an overdose, and are there more simple and better ways?
  
  Thank you very much for help!
  
  
  Newman

  Hello

  Is there a specific reason why you don't simply create read only object to display with some count (*) as OFCASES from MYTABLE and then just drag and drop the attribute ofcases in page?

  Kind regards

  Branislav

• I can't Live Update my Max Total Security that I get the message "DB update failed download!» Max Support also did not help at all. Disappointing. What should do?

  I can't Live Update my Max Total Security that I get the message "DB update failed download!» Max Support also did not help at all. Disappointing. What should do?

  Do yourself a favor and remove the application.  Mac do not need AV applications and at best, they will be not hard (but not good either) and at worst will corrupt your system / OSX's built in protection.  Your concerns are malicious software that requires the cooperation of the user to install, not the virus.

  For more information, please read this:

  http://www.thesafemac.com/

  Ciao.

• Get the value at a specific frequency

  Hello

  I'm new to LabView. Now I have a task to develop a vi that can add value at a specific frequency automatically.

  There are two channels of signals. These data are produced by an external generator with scan function. These signals, therefore, with a different frequency. My task is to get the amplitude of the signal at a different frequency in the following table. That is, the vi can be recorded 450,9 the vi "detect" the frequency of the signal is 100 kHz. And then output a table as follows. The attached VI is to mimic the signals swept as the following table. So how can I do?

  Any help will be much appreciated.

  See you soon

  Yang

  V1out	V2out	Frequency (kHz)	Ratio
  450,9	444.5	100.0	0.99
  447,4	445,7	200.0	1.00
  445,3	445,1	300.0	1.00
  444,8	458,7	400,0	1.03
  440.9	460,7	500.0	1.04
  437.0	468,7	600,0	1.07
  429,1	488.2	700,0	1.14
  417.0	496.4	800,0	1.19
  397,6	511.7	900.0	1.29
  378.0	535,4	1000.0	1.42

  Hi Yang

  I'll send your VI with a few changes, I hope that you are looking for and I hope that this can help you!

  Concerning

• Is there a way to get the total number of samples to a TDMS file?

  I'm looking at the documentation for the function of properties Get TDMS and I see that it has a property: wf_samples which "represents the number of samples in the first data segment. Is it possible to get the number of samples in, say, the second segment of data? My goal is to get the number of samples in all segments of data for a single channel.

  To retrieve the total number of samples, I use the properties of 'NI_ChannelLength' to be linked to the function of TDMS properties get.

  The I64 outbut gives you the total number of samples of the selected channel.

  See attachment so useful

  Marco

• That's why when I want to sign into xbox live on my console, I get the join rather than the sign in guest

  Original title: sign in error xbox

  That's why when I want to sign into xbox live on my console, I get the join rather than the sign in guest?

  Hello

  The issue you have posted is related to Xbox Live, I recommend you post this question in the Xbox forum.

  http://forums.Xbox.com/xbox_forums/xbox_support/default.aspx