Satellite C660/C6600 stays on a blank black screen

Similar Questions

• When I turn on my computer, I get a blank black screen and must disable it again.

  When I turn on my computer, I get a blank black screen. Then, I turned off the computer and turned it back and a message says turn on in safe mode, safe mode with networking, or safe mode with command prompt.  I turned on in safe mode with network, then I got a message saying check your network settings or material in your control panel, but I don't know what to check. Then I did a system restore to an earlier date. Everything was well computer works well again. Then when I turned on my computer this morning the same thing again. I did the same restore to an earlier date and then was able to use my computer. Someone at - it ideas why this happened? the computer worked fine until two days ago. I use windows xp home addition.

  Hi jantravis,

  ·         There were no significant changes made on the computer before the show?

  ·         Have you installed new software, hardware or Windows updates?

  ·         You get any message on the computer when the problem occurs?

  ·         What is the exact message that you receive in safe mode?

  Check to see if this article helps you.

  After the Windows Logo appears or after you log in to Windows, a Windows XP computer cannot display the wallpaper, a black screen or a blue screen

• Satellite C660-268 does not start, no start screen

  My laptop Toshiba Satellite C660-268 was installing updates, then it froze for half an hour, I decided to force quit by pressing the power button.

  I tried power, portable could not wake up, I can hear the fan but screen is not black, no post/splash screen (Bios screen), turn on the led goes for a few seconds and then turn off. I tried to press the important function, but nothing could make my laptop boot or stay on. Please,

  I need your help in order to remake my boot laptop

  I think that some of the material died during update installation.
  From my point of few, it was simply bad luck that this error occurred during the update of the system.

  There is only one real solution: the troublemaker should be found and replaced.

  Theoretically, this issue can result from memory problems, but also the failure of the motherboard. The RAM modules are not very expensive and where the RAM is faulty, the fix is not a big problem.

  But in case of malfunction of the motherboard, the laptop repair could be a very costly affair.

  What could be the next step?
  I think if you have no experience of mainframe, you should seek some professional help and assistance.

• Satellite C660-106 won't get past boot screen and stops

  Hi all new here

  Well, we had our c660 106 for 2 months now, but the boss has decided to drop about 6 inches high, he stayed on but the led screen is cracked internally as the colors were bleeding on etc, very bad.
  He stayed on until today and ive been screen awards to the top. (it was connected via rgb to my home lcd)

  I had to unplug the laptop and turn it off, but now the problem is when I turn it on it will do initial fire up toshiba black screen where I 0f f2 and f12 options but then immediately turns off completely, we fear now that we have a 1 year old and we have all that she has done on it,
  can I try

  I know that the warranty usually cover as its obvious broken screens and not only failed.
  any help would be brill

  Thank you

  someone at - it an idea?
  see you soon

• Satellite U500-1E0 - Webcam shows only a black screen

  Hello world

  I have this problem, my webcam does not work. It has a blue light which indicates that it is running but it only shows the black screen. I tried to update software, uninstall, reintstalling once again, but nothing helped. I even downloaded a new driver from the Toshiba Web site but nothing.

  Please, does anyone have a any solution to this problem?

  My laptop is Satellite U500-1E0

  Thank you
  E-mail: [[email protected]]

  Hey,.

  If the webcam shows just a blank screen, I could imagine it's just a setting incorrect webcam.

  On the Web from Toshiba site, I found a helpful article that I think:
  [How to change the settings for the built-in webcam If the image is very dark or black? | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=59]

• Satellite A210 - 14 d go on a black screen

  Hello

  I have a laptop Toshiba Satellite A210 - 14 d models that display a black screen.
  I tried to boot the device with a memory inserted in the slot and repeat this with two modules in each location but nothing happens!

  I clear cmos, and after you press the button "power" for 30 sec but nothing and nothing and nothing...
  I could not find ROM BIOS of the laptop, is it possible for you that put here because the site Web of Toshiba BIOS do not support previous models of the A300.
  And the other question is: is it possible that the graphics chip could be the problem?

  Post edited by: kiyan
  other reason

  > I couldn't find ROM BIOS of the laptop, is it possible for you that put here because the site Web of Toshiba BIOS do not support previous models of the A300.

  The BIOS and drivers for older models of laptops are in the area to carry out the download page for the driver (in the product Type click Archive).
  But to be honest, that I think that something is wrong with the BIOS EPROM module.
  Firstly the laptop must turns on and works properly even if the BIOS isn't up-to-date. In addition, the EPROM module cannot be corrupted in case you do not flash this module using BIOS incorrect or is not compatible.

  In my opinion, the issue may be related to any part connected to the motherboard: possible troublemakers could be RAM, CPU, GPU, as well as the motherboard.

  I guess you will need extra help laptop computer technician in order to locate the hardware failure.

• Satellite Pro P300 - 13 m - boot problem: black screen with 3 beeps

  Hello

  Satellite Pro P300 - 13 m, I bought a few weeks ago and in time, I had about 5 - 6 times the same rear screen when I tried to start the system. When he does this notebook gives 3 loud beeps (not sure what that actually means).

  When he does this I have to press the power button for 5 seconds and after several times doing this that it will show the Welcome screen toshiba... then sometimes it will automatically restart again and I get this annoying black screen again. Most of the time when I wait about 10 minutes and try to do as well the system starts as usual... Yes... very strange thing here.

  To be honest, I don't want to send the laptop for Toshiba once again, as I could use for my business...

  Then. What could this be? I've already updated the latest version of the BIOS.

  Thnx in advance

  Carl

  Hello Carl

  I have the Satellite Pro P300 (PSPC1E). I installed Windows XP Home edition and my Vista. Use the two operating systems with success and everything is OK.

  What operating system do you use?
  Have you noticed that on the first day?
  Your laptop is placed correctly on the desktop without cooling vents?
  When you start Notepad you see every time that Toshiba welcome screen?

• Satellite L775D-107 is not starting and black screen

  Hey
  I have a problem with my Toshiba Satellite L775D-107 and I hope you can help me.
  Since yesterday, my laptop displays a black screen. When I push the Start button, nothing happens, but you can hear it is aired but nothing more. a few hours before that I was working on it to Uni and everything was fine.

  I had the same problem a couple of weeks, and I read on the internet that he could help out the battery for 3 minutes and then press F2 and the Start button. Nothing happened, but after 2 hours I tried to start again and all of a sudden it started correctly and worked flawlessly.
  .
  Now I'm having the same problem again and I tried the same procedure but still nothing happens. Always the black screen and just the sound of the air coming out...

  I've got very important documents in United on this laptop, so I hope you can help me.

  Thank you in advance.

  Hey

  My L50 did the same thing. Sometimes, when an another Toshiba is nearby.

  Sombody bnows so this can't be helped?

  Mike

• Re: Satellite A100-011 does not start, a black screen at the beginning

  I have a Toshiba Satellite A100-011, which is almost 5-6 years. It suddenly started to behave abnormal.

  First of all, I started to get a 1-2 sec black screen when he was running. The screen was on and off occasionally.

  After a few days, I could not started upward from my windows xp sp3 operating system. I tried to start in safe mode with networking to see if I had a few spy, virus or something. I ran avast, hijact, ad-aware and some more, but not found anything.

  Later, I tried to format my laptop with a xp professional, but this time I can't see any reflection that passes more fun running and a black screen. I just got a black screen at the beginning and it does not start.

  I plugged on a television screen, and here I have started. I have re-installed all the drivers and formatted, but all I get is a black screen on my laptop at the beginning.

  What should I do now? Do you think I have a problem with my screen of HW or a driver problem with nvidia geforce go 7600? Maybe I'm missing something?

  Thanks in advance for all replies.

  If you can see the picture on the TV there are a few s laptop display problem. Y at - it some problem connection or display itself.

  You want to fix it yourself? You can disassemble the laptop?
  I mean if you have any experience with this kind of things that you should seek professional help.

• Satellite C650 - stuck with the underscore and black screen boot

  Model: satellite C650

  Operating system: windows 7 Home premium

  Problem: when I try to turn on the computer I see the Toshiba screen and then a black screen with a underscore that blinks several times then stops, and the computer is blocked like that. The fan seems to be working. I can't go to mode without failure or boot options, even if I press f8 or f12 nonstop.

  Last time I started mode, I was stuck on the screen but the connection keyboard touchpad did not work and I couldn't stop. After that I have the strength of closing down and try to restart stuck like that. No beeps or anything like that.

  Any help would be appreciated.
  Thank you

  Good news.
  Thanks for the comments.

• Everyone discover blank (black) screen & freeze after power and then reconnect?

  I pulled the power, battery fully charged if computer remained on. When I reconnected it the power, the screen went blank (black). I tried to hit the SPACEBAR, move mouse, etc. in order to bring the screen back on. No joy. Fan has started, but no image of the screen. Had to stop or reverse to put the system up. Sure, windows said that he had known a bad close and asked if I wanted to start in SafeMode etc. Just start normally and windows went very well.

  Laptop is a HP Envy 17 Windows 7 with SP1 applied.

  Hello

  Download the graphics driver on the link below Installer and save it on your desktop.

  FTP://ftp.HP.com/pub/SoftPaq/sp52001-52500/sp52242.exe

  Once the download is complete, right-click on the Setup program and select "Run as Administrator" to launch the installation.  When you are done, reboot the laptop.

  Kind regards

  DP - K

• my creative cloud has a blank black screen?

  My creative cloud has a black screen blank, tried everything (deleting file opm in folder OOBE etc) any help would be thank you very much

  Then I updated my Nvidia card and it works now. Thanks for your time

• Satellite M70 - 350 - recovery disk stopped with black screen

  Hello

  I tried my laptop with the original recovery CD or DVD recovery. He just stopped with the black screen and the error message.

  After that, I tried the advanced recovery mode. By selecting the ghost Image, which gave me the Image corrupt error.

  Weird enough even installing from an original CD of Windows fails. With that before even I can select something, I get a black screen with a blinking cursor. Appers whil the windows cd is loading drivers.
  At the bottom of the screen, there are that many drivers listed one after the other. The last thing mentioned here before the blinking cursor is Partition NTFS.

  Cause the original recovery disc has already deleted all the contend on the laptop it's usless now.

  Any ideas what the problem might be?

  I also think that there is a problem with the HARD drive.
  If possible, try to get a new one and try installing the OS using recovery media again.

  Do you use DVDs of recovery for the first time?

• Blank (black) screen with the cursor of the mouse after the Welcome screen

  I have search through forums and I see a lot of people is having this problem too, XP and Win7 users included, but it seems that more people is having this problem on Vista. None of the solutions have solved my problem, however. It does not show the option "Start Task Manager" when I press Ctrl + Alt + Delete. I tried to start safe mode, it is always the same. Since I was using OEM Acer, I don't have the Vista installation disc. My sister was having this problem on his Toshiba laptop too, but fixed because it was sent to Toshiba service. On the forums, some say it is a malware, some say that it happened after some update but I don't update or download anything yesterday. There looks like a major problem nowadays, please help us solve this problem!

  Hello

  You can access Mode safe? Repeatedly press F8 as you start? If yes you can try Control Panel - device
  Manager - graphics card - Double click on - driver tab - click on UPDATE driver - then right click
  on devices and UNINSTALL - REBOOT.

  Another method to try to get to the desktop (try in normal Windows Mode without failure)
  CTRL + ALT + DELETE and on the tab process EXPLORER.exe and COMPLETE the PROCESS on this subject - then
  on the Applications tab - lower right - new task - type in EXPLORER.exe.

  First check this thread in case it is simple and if not to come back to this thread.

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a

  Black screen problems are extremely difficult to repair and all patch is usually on a base hit or miss.
  That there is no information on a black screen as it is on a blue screen just adds to the
  Difficulty. Often using a restore point or Startup Repair will have no effect. You can try a
  Google to see the proposed repairs, whom some have worked however these cover a wide
  field efforts.

  Here's a video of one of them.

  http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1

  Here's another fix
  http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.php

  You have a Vista disk? You can try restoring the system to it. If you do not have your system disks
  manufacturer will sell them at low prices. Or try in safe mode if you can get there.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can create a recovery disc or use someone even version (to do the system restore there only to)
  being bootable).

  How to create a Vista recovery disk
  http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

  ------------------------------------------------

  These require the correct Vista discs since you can not start safe mode.

  Try the Startup Repair tool-

  This tells you how to access the System Recovery Options and/or with a Vista disk
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  -----------------------------------------------

  Here are a few Google searches where many have found different solutions:

  Vista black screen - check that a 1st
  http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10

  Vista black screen Solution
  http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQI

  Vista black screen Fix
  http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI

  -----------------------------------------------

  If necessary and you can access all ordinary Windows.

  You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation (if all goes well
  saves the data, and you need to reinstall the programs). Be sure to do a good backup or three.

  You can use another DVD that are not protected but you will need to copy you have the product key.

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  If nothing works, you can make a repair facility that must save the data but you will need to
  Reinstall the programs. This also requires correct Vista disks especially for OEM versions. You will be
  need to know your product Code.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  ---------------------------------------------------------------------------

  Another method that works sometimes: at the command prompt, type of Vista startup disk:
  (type in a single line or copy / paste a line at a time and then press enter - type no parenthesis)
  or "BOLD")

  c:

  cd\

  CD c:\Windows\System32\winevt (there is a space between cd and C :)
  
  Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)

  RESTART Windows

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Satellite L845-SP4303: win 8.1 - got black screen after account manager

  Hello! How are you?
  First of all, I apologize if my English is bad.

  Well, I'll tell you what happened.

  I have a Satellite L845-SP4303FA and I installed Windows 8.1 store yesterday.
  The installation took a lot of time, and the laptop was connected to the electric power with the AC connector during installation.

  Installation was successful, and when it was finished, I disconnected laptom of electric energy.
  I used the laptot without problems, Windows 8.1 worked very well, and when there is no more battery I turned off laptop.

  And here's the problem:
  Today, I turn on the laptop, one of the Windows accounts is automatically loaded and later, the GET black sceen forever.

  I am able to move the mouse, but I can't do anything.
  I can't use the keyboard, I tried Ctrl + Alt + Supr to impulse, but it's impossible.

  Is there a possible solution?
  Thank you very much!

  Hello

  Turning the unit off.
  Disconnect the power adapter
  Remove the battery
  Press and hold the power button / stop along 30 sec
  Leave the laptop disconnected for a while (3-4 hours)
  Connect the battery and AC adapter and turn on the device

  You see something on the screen now?