Get the same update again and again
Automatic update is enabled. However, update KB2633171 I had to update maually. This update will not disappear after that he told me to UPDATE CORRECTLY INSTALLED. It shows (several times now) in the history of the SUCCESSFUL update. However, when I go to the window, UNINSTALL AN UPDATE, it says NO updates update ARE INSTALLED on THIS COMPUTER. Other updates are automatically installed without problem. Can someone please solve my problem?
Ah, but have you tried the things mentioned in the article, such as.
Determine whether the update has been installed
To determine if the update has been installed, use one of the following methods.
Method 1: Examine the history of installation
To view the history of installation, follow these steps:
- Click Start, point to all programs, and then click Windows Update or Microsoft Update.
- On the Web site, click view update history.
- Find the latest entry for the specific update.
- Note the color of the icon in the status column. If the icon is green, the update has been installed. If the icon is red, the update is not installed.
or if the update has not been installed may
Install the update in Mode without failure. To do this, follow these steps:
- Download the update. To do this, follow these steps:
- Visit the Microsoft Download Web site:http://www.Microsoft.com/downloads (http://www.microsoft.com/downloads)
- In the search for a download box, type the article number of the Knowledge Base that describes the update, and then click OK.
- Download the update, and then save it on the desktop.
- Visit the Microsoft Download Web site:
- Install the update. To do this, follow these steps:
- Double-click the downloaded file to install it.
If you are prompted to restart the computer, do so.
- Visit the Windows Update or Microsoft Update Web site to check if the update is offered again. If you are offered the update again, proceed to the next step.
- Double-click the downloaded file to install it.
- Install the update in Mode without failure. Safe mode disables most of the processes and services running. These services include the Windows Update service. Installation of an update in Mode safe is a quick test to check if an application or process interferes with the installation. To install mode safe mode, follow these steps:
- Restart the computer.
- The computer starts, press the F8 key.
- Use the arrows to select Safe Mode, and then press ENTER.
- Double-click the file that you downloaded in step 1 to install the file.
- Once the installation is complete, restart the computer.
- Visit the Windows Update or Microsoft Update Web site to check if the update is offered. Otherwise, wait until automatic updates runs again.
Tags: Windows
Similar Questions
-
Why am I getting the same update again and again and again
Why you continue to send me updates to install internet exp 9 when I have already installed and that you sent me the same update 8 times so far
Hello
It's not Microsoft '
These are public forums, only led by Microsoft
You can right click on the IE9 update - UAC prompt - hide
-
Vista - when the computer is shut down, continue to get the same updates offered and does not
Update of security for MICROSOFT.NET Framework 4 on Windows XP, Windows Server 2003, Windows Vista, Windows 7, Windows Server 2008, Windows Server 2008 R2 for x 64 systems (KB2160841)
Everytime I go I turn off I get this update. It happened now 57 times in the last month. It seems that the downlaod fails when checking for details. Is it possible that I can remove the update total.
* original title - Codes *.
How to hide updates or restore the hidden in Windows Vista updates
http://www.itechtalk.com/thread5013.htmlThe problems with the installation of the updates:
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updatesYour problem can be solved or answered if you post on the forum of Windows Update:http://social.answers.microsoft.com/Forums/en-US/vistawu/threads
Never be afraid to ask. This forum has some of the best people in the world to help.
-
I get the same update again and again. What is the problem?
A security update for Microsoft Visual C++ 2005 Service Pack 1 Redistributable Package (KB2538242)See the MVP response to a previous post, involving the error:
If the update installs successfully but is available again then you can follow the below mentioned article.
Troubleshooting Windows Update or Microsoft Update when you are repeatedly offered an update
http://www.Vistax64.com/tutorials/72491-Windows-Update.html
06/17 / 1103:20: 23:00
-
I get the same update to install, again and again, when the original is installed at 4 or 5 times.
Hi stevie33
For the update are facing the issue?
If you have the update already installed on your computer and always offered several times the update then I suggest refer you to the Microsoft article provided below and follow the steps in resolution-
http://support.Microsoft.com/kb/910339/
I hope this helps.
-
Windows Update continues to install the same update over and over again
Windows Update will continue to install the same update again and again for about a week now. He always says the update was installed successfully but in 2 minutes windows update wants to install the same update again. I went directly to Microsoft to check updates and it shows me who need the update even again in the history of the update, it shows the update installed successfully at least 10 times. Update for Microsoft security update
.NET framework 4 on Windows XP, Windows Server 2003, Windows Vista, Windows 7, Windows Server 2008 x 86 (KB2446708) (update 1 of 1)...
Hello
I had exactly the same problem and it resolved the response in this thread: http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_update/security-update-for-microsoft-net-framework-4/f7c1fbbb-8c66-e011-8dfc-68b599b31bf5
Why don't give you it a try?
I hope that helps!
-
I get the same updates for windows, it seems to download and install properly but then next day return.
Hi Graxx101,
· Did you do changes on the computer before the show?
· The updates are installed successfully?
Follow the steps in the article.
Windows Update or Microsoft Update repeatedly offers the same update
-
Why do I get the same updates to install
Why do I get the same update installSecurity update for Microsoft Visual C++ 2005 Service Pack 1 Redistributable Package (KB2538242)
Download size: 2.6 MB same thing more and more and more.
Hello
I suggest you to follow the steps in this link and check if it helps:
http://support.Microsoft.com/kb/910339
It will be useful.
-
photos has not been loaded for weeks (usually the browser chrome on PC windows at work). I tried now on some other computers and get the same error message and I report every time. is there anything I can do or just wait for someone to fix it?
If you want any help here, you'll have to tell us what the error message.
Which report you errors to?
-
Why do I get the same update is keep coming for updating this kb 2538242 service pack 1 update
Thank you roy
This is because the update has failed.
It is a Ko http://support.microsoft.com/kb/2530477
But you really need to specify the err code in Windows Update > history for the update has failed.
If your PC is a large manufacturer, for example Dell/HP, you must make sure your drivers are updated since the support to the site
-
and I don't know how to find the updated info? Help! It takes 5-10 minutes every time I have shut down the computer. How to cancel this update which blocks my crt?
Thank you!
Julie
Hi jjackbcop,
Thanks for posting in the Microsoft Community.
I understand that you are facing the issue with windows updates offer several times over and over again.
Method 1:
I suggest you perform the clean boot and check.
Place the computer in a clean boot state, then check if it helps. You can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353
Note: After completing the steps in the clean boot troubleshooting, follow these steps to configure Windows to use a Normal startup of the link report section to return the computer to a Normal startup mode.
After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.
(a) click Start, run.
(b) type msconfig and click OK.
(c) the System Configuration Utility dialog box appears.
(d) click the general tab, click Normal Startup - load all services and device drivers and then click OK.
(e) when you are prompted, click on restart to restart the computer.
Method 2:
I suggest you send the link and check (this also applies to windows XP).
Windows Update or Microsoft Update repeatedly offers the same update
-
This update keeps coming back even if it has been installed at least 15 times. Does anyone know why it keeps doing what/how stop?
This problem may occur because of corrupted content of the Software Distribution folder.
Rename the software file Distribution try to access the Windows Update site again.
How to rename the software D folder in Vista - distribution agent version
1. stop the Windows Update service (make sure that you are logged on as administrator)
Start button | Control Panel | System and Maintenance | Administration tools
Double-click on Services
(Provide the administrator password or a confirmation if prompted to do so.)
Right-click the Windows Update service and click on stop.2. Click Start, type %windir%\System32 in the search box and press ENTER.
Find and rename the folder C:\Windows\SoftwareDistribution.
3. start the Windows Update service
Start button | Control Panel | System and Maintenance | Administration tools
Double-click on Services
(Provide the administrator password or a confirmation if prompted to do so.)
Right-click the Windows Update service and click Start.This procedure will erase your history on the Windows Update Site. Not important.
Reboot - without having to restart, the new folder could not be created successfully.
TaurArian [MVP] 2005-2010 - Update Services
-
Creative Office Cloud | Apply the same updates, over and over again.
My CC application apply the same updates to 6 products almost every day. Even updates, same version number, exactly the same level of detail. I'm not one missing a revision.01 - they are all the same.
OS X Mavericks. Applied last CC Office today. Same question.
I really don't want to uninstall and reinstall the applications and plugins. Such things should work the box 50 PCM.
Please notify.
Hi QCM UK,
Please try the mentioned below as follows:
1. navigate to ~/Library/Application Support/Adobe/AAMUpdater/1.0 and rename it.
Allow the user library: http://helpx.adobe.com/x-productkb/global/access-hidden-user-library-files.html.
2. activate the root account and place you ~/Library/Application Support/Adobe/AAMUpdater/1.0 and rename it.
Enable the root account: http://support.apple.com/kb/PH14281.
Launch desktop CC and let me know if still the same issue.
Kind regards
Romit Sinha
-
I get the same updates 4 times,
I get the same 4 updated again and again, even after a successful installation, the same updates appear during installation. They show installed as well on the history list.
They are: Security Update for Microsoft .NET Framework 4 on Windows XP, Windows Server 2003, Windows Vista, Windows 7, Windows Server 2008 x 86 (KB2478663) download size: 4.9 MB update type: Important security updates for the download size of Microsoft .NET Framework 4 on Windows XP, Windows Server 2003, Windows Vista, Windows 7, Windows Server 2008 x 86 (KB2518870) : 18.2 MB, 7, Windows Server 2008 x 86 (KB2468871) the download size: update of 18.9 MB for download size of Microsoft .NET Framework 4 on Windows XP, Windows Server 2003, Windows Vista, Windows 7, Windows Server 2008 x 86 (KB2533523): 19.4 MBSee if repair .NET Framework 4 (followed by a reboot) will allow the KB2478663, KB2518870, KB2468871 & KB2533523, to install. See method 1 (only!)-online here http://support.microsoft.com/kb/2507641 (ignore the title & section symptom, if necessary).
-
Windows Update keep repeating the same updates KB2676562 and KB270511
Original title: update for Windows XP (KB270511) security will not stop asking an installation!
Update for Windows XP (KB2676562) security and update for Windows XP (KB270511) security won't stop asking Installation, even after several installs!
Hello
Were there any changes (hardware or software) to the computer before the show?
I suggest you perform the steps mentioned in the link and checking.
Windows Update or Microsoft Update repeatedly offers the same update
http://support.Microsoft.com/kb/910339
You can run the automated FIXIT and check if this may help; If it isn't then you can perform other manual steps mentioned in the link.
Note: there is a risk of data loss if all the files are infected and which can be removed in the cleaning process.
You can also check:
MS12-034: Description of the update of security for Windows kernel-mode drivers: 8 may 2012
http://support.Microsoft.com/kb/2676562
Hope this helps and keep us informed if you need help.
Maybe you are looking for
-
You are considering buying an ipad 64 GB air2 2nd hand and I wondered if the fingerprint recognition can be reset to zero after factory reset, also can I check the authenticity of the device? Gordon
-
Pavilion g6-2241sa laptop: HP Pavilion laptop g6 - device wireless no Windows 7 driver
Hello I have another laptop that I have no internet access on the machine below. I installed a copy of Windows 7 on my laptop - PC portable HP Pavilion G6-2241 his. All other device drivers seem to be installed and working. However, the following dev
-
Update of security continues to display the shield yellow in the system tray after installation twice and restarted (KB972270 & KB982132).
-
Failed to open the configuration for java or adobe creative cloud on Windows Vista
D'origina ltitle: of course, my computer has a problem when I do something on it I have an inspiron equipped 5305 Vista and I can download stuff but I tried to download java and adobe creative cloud because of my recent having wipe my pc and I can no
-
Vista updates step 3 of 3 reboot loop, cannot fix
I SOLVED THE PROBLEM. WHAT I DID TO SOLVE IT, IT IS AT THE BOTTOM. Someone gave me a laptop to fix, a laptop trying constantly to finsih step 3 in the process of updated, and which never ends and keeps restarting and doing a program over and over ag