Why do I get the same updates to install

Similar Questions

• Why you KEEP GETTING THE SAME UPDATE KEEP COMING until THE UPDATE THIS UPDATE IS KB 2538242 SERVICE PACK 1 HOW DO I STOP

  Why do I get the same update is keep coming for updating this kb 2538242 service pack 1 update

  Thank you roy

  This is because the update has failed.

  It is a Ko http://support.microsoft.com/kb/2530477

  But you really need to specify the err code in Windows Update > history for the update has failed.

  If your PC is a large manufacturer, for example Dell/HP, you must make sure your drivers are updated since the support to the site

• I get the same update to install, again and again, when the original is installed at 4 or 5 times.

  I get the same update to install, again and again, when the original is installed at 4 or 5 times.

  Hi stevie33

  For the update are facing the issue?

  If you have the update already installed on your computer and always offered several times the update then I suggest refer you to the Microsoft article provided below and follow the steps in resolution-

  http://support.Microsoft.com/kb/910339/

  I hope this helps.

• Why get the same update to install 'to security update for Microsoft Visual C++ 2005 Service Pack 1 Redistributable Package (KB2538242)

  I get the same update again and again. What is the problem?

  A security update for Microsoft Visual C++ 2005 Service Pack 1 Redistributable Package (KB2538242)

  Rode65,

  See the MVP response to a previous post, involving the error:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_update/update-kb2538242-is-installed-but-Windows-Update/d651c7c6-BC30-40F0-97a3-dd2e3323094b >

  If the update installs successfully but is available again then you can follow the below mentioned article.

  Troubleshooting Windows Update or Microsoft Update when you are repeatedly offered an update

  http://www.Vistax64.com/tutorials/72491-Windows-Update.html

  06/17 / 1103:20: 23:00

• Why am I getting the same update again and again and again

  Why you continue to send me updates to install internet exp 9 when I have already installed and that you sent me the same update 8 times so far

  Hello

  It's not Microsoft '

  These are public forums, only led by Microsoft

  You can right click on the IE9 update - UAC prompt - hide

• I get the same update to install

  It is security update for xml core services 4.0 microsoft service pack 2 (KB954430)
  Why is this happening, he says it has installed, I installed it for like a month now, please help

  Hello Jason 01,.

  Method 1:
  Please install the Windows Installer Cleanup utility from the link below
  http://download.Microsoft.com/download/e/9/d/e9d80355-7ab4-45b8-80e8-983a48d5e1bd/msicuu2.exe

  After installation, run the tools by clicking Start --> programs --> Windows Clean up.
  Inside the window, serach for Microsoft XML Core Services & remove completely. Then visit the link to download & install them as the 'security for MSXML 4.0 Service Pack 2 (KB954430) update' update below.

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=96a4413c-5261-4f69-83d0-932c430abd14&displaylang=en

  Method2:
  To resolve this issue, follow these steps:
  1) click Start, click run, type cmd, and press ENTER.
  (2) at the command prompt, type ren %windir%\System32\msxml4.dll msxml4.old, and then press ENTER.

  Note When you press ENTER, you may receive the following error message.
  Cannot find the specified file.
  Ignore this message and proceed to step 3.

  (3) at the command prompt, type exitand press ENTER.
  (4) visit the following Microsoft Web site:
  http://www.update.Microsoft.com
  (5) download and install the latest MSXML security update.

  I hope this helps.

  [If this post can help solve your problem, click on the button 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

  --

• I get the same updates for windows, it seems to download and install properly but then next day return.

  I get the same updates for windows, it seems to download and install properly but then next day return.

  Hi Graxx101,

  ·         Did you do changes on the computer before the show?

  ·         The updates are installed successfully?

  Follow the steps in the article.

  Windows Update or Microsoft Update repeatedly offers the same update

• I get the same updates 4 times,

  I get the same 4 updated again and again, even after a successful installation, the same updates appear during installation. They show installed as well on the history list.
  They are: Security Update for Microsoft .NET Framework 4 on Windows XP, Windows Server 2003, Windows Vista, Windows 7, Windows Server 2008 x 86 (KB2478663) download size: 4.9 MB update type: Important security updates for the download size of Microsoft .NET Framework 4 on Windows XP, Windows Server 2003, Windows Vista, Windows 7, Windows Server 2008 x 86 (KB2518870) : 18.2 MB, 7, Windows Server 2008 x 86 (KB2468871) the download size: update of 18.9 MB for download size of Microsoft .NET Framework 4 on Windows XP, Windows Server 2003, Windows Vista, Windows 7, Windows Server 2008 x 86 (KB2533523): 19.4 MB

  See if repair .NET Framework 4 (followed by a reboot) will allow the KB2478663, KB2518870, KB2468871 & KB2533523, to install. See method 1 (only!)-online here http://support.microsoft.com/kb/2507641 (ignore the title & section symptom, if necessary).

• I get the same updates after installation.

  Even updates too.

  Hi BillMcWilliams,

  Follow the troubleshooting steps in this document to resolve the issue with offered several times the same updates.

  Let us know if that helps.

• Running Windows 7. Whenever I turn it off, I get the same update message. "Please don't turn off or unplug your laundry." Installation of update 1 of 17. How can I fix it?

  I have shut down my system while the update took place.  Do not always have time to wait.

  You can use the solutions in this KB - 3 methods and I listed a little help for them below

  The update is not installed successfully, you receive a message, and the computer restarts when you try to
  install an update in Windows Vista and Windows 7
  http://support.Microsoft.com/kb/949358

  Method 1: Start Windows Vista with the Windows installation media and use the repair feature

  How to do a startup repair in Vista and Windows 7
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  You can also do a safe mode startup repair to access the Recovery Options If you have them available
  or use the DVD as described above.

  This tells you how to access the system - Vista Recovery Options
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  For Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/Startup-Repair-frequently-asked-questions

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  Method 2: Start the system in safe mode and then use the system restore feature

  How to do a system restore in Vista and Windows 7
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can also do a restore of the system of starting with a Vista disk.

  Method 3: Use the downloads at the end of this article - note for Vista x 86 versions 32 bit and Vista
  x 64 64-bit.

  The update is not installed successfully, you receive a message, and the computer restarts when you try to
  install an update in Windows Vista
  http://support.Microsoft.com/kb/949358

  ------------------------------------------------------

  Once you are in Windows I was running once again reset here as a precaution.

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  Hope this helps sort it out for you.
  Rob - bicycle - Mark Twain said it is good.

• Get the same update again and again

  Automatic update is enabled. However, update KB2633171 I had to update maually. This update will not disappear after that he told me to UPDATE CORRECTLY INSTALLED. It shows (several times now) in the history of the SUCCESSFUL update. However, when I go to the window, UNINSTALL AN UPDATE, it says NO updates update ARE INSTALLED on THIS COMPUTER. Other updates are automatically installed without problem. Can someone please solve my problem?

  Ah, but have you tried the things mentioned in the article, such as.

  Determine whether the update has been installed

  To determine if the update has been installed, use one of the following methods.

  Method 1: Examine the history of installation

  To view the history of installation, follow these steps:

  1. Click Start, point to all programs, and then click Windows Update or Microsoft Update.
  2. On the Web site, click view update history.
  3. Find the latest entry for the specific update.
  4. Note the color of the icon in the status column. If the icon is green, the update has been installed. If the icon is red, the update is not installed.

  or if the update has not been installed may

  Install the update in Mode without failure. To do this, follow these steps:

  1. Download the update. To do this, follow these steps:
     1. Visit the Microsoft Download Web site:
        http://www.Microsoft.com/downloads (http://www.microsoft.com/downloads)
     2. In the search for a download box, type the article number of the Knowledge Base that describes the update, and then click OK.
     3. Download the update, and then save it on the desktop.
  2. Install the update. To do this, follow these steps:
     1. Double-click the downloaded file to install it.

        If you are prompted to restart the computer, do so.

     2. Visit the Windows Update or Microsoft Update Web site to check if the update is offered again. If you are offered the update again, proceed to the next step.
  3. Install the update in Mode without failure. Safe mode disables most of the processes and services running. These services include the Windows Update service. Installation of an update in Mode safe is a quick test to check if an application or process interferes with the installation. To install mode safe mode, follow these steps:
     1. Restart the computer.
     2. The computer starts, press the F8 key.
     3. Use the arrows to select Safe Mode, and then press ENTER.
     4. Double-click the file that you downloaded in step 1 to install the file.
     5. Once the installation is complete, restart the computer.
     6. Visit the Windows Update or Microsoft Update Web site to check if the update is offered. Otherwise, wait until automatic updates runs again.

• Why do I get the same upated for visual c# 2005 service pack 1 redistributable package when I mentioned and pack of 2

  It keeps just appearing on my windows update, I downloaded it about 5 or 6 times but he always comes back, I do the security checks every day, but there is nothing to come, so could you take a look and tell me how he fixed please.thank you and bye.

  Hi williammarrs,

  ·         Is this the only update that is offered several times?

  I suggest you follow the link given and check if the problem persists.

  Troubleshooting Windows Update or Microsoft Update when you are repeatedly offered an update

  Hope the helps of information.

• I can't get the last update to install. How can I fix it?

  It comes back with an error message saying it could not patch or something like that?

  I would try downloading a new version and delete the old. I had the same problem too, with the same operating system. The re-install worked for me.

  Have a great day!

  Jon

• Vista - when the computer is shut down, continue to get the same updates offered and does not

  Update of security for MICROSOFT.NET Framework 4 on Windows XP, Windows Server 2003, Windows Vista, Windows 7, Windows Server 2008, Windows Server 2008 R2 for x 64 systems (KB2160841)

  Everytime I go I turn off I get this update. It happened now 57 times in the last month. It seems that the downlaod fails when checking for details. Is it possible that I can remove the update total.

  * original title - Codes *.

  How to hide updates or restore the hidden in Windows Vista updates
  http://www.itechtalk.com/thread5013.html

  The problems with the installation of the updates:
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Your problem can be solved or answered if you post on the forum of Windows Update:http://social.answers.microsoft.com/Forums/en-US/vistawu/threads

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• Why repeated guests for the same updates?

  Asked three times today and five times this week, as well as several times this year, to install the updates below and I go through the installation process, restart, etc., correctly. They keep coming back. Why.

  Updates to security for Microsoft .NET Framework 2.0 SP2 on Windows Server 2003 and Windows XP x 86

  (KB2789643) (KB2729450) (KB2604092) (KB2742596) and (KB2804577)

  This has not fixed the problem. I requested the assistance of a local PC expert who directed me to a NetFxRepairTool application that has this fixed the problems.