get the specific channel pixels

Similar Questions

• Could not get the matrix of pixels per 'ImageToArray' VI...

  I have run the 'ImageToArray' example, but you see, I can't get the matrix of pixels in the image.

  could someone help me?

  Thank you very much!

  

  I deal with problems, thank you!

• How to get the specific information of hardware and software data center

  How to get the specific information of hardware and software data center with powercli...

  What kind of information you need?

  No matter what Esxi host hardware info., if so could below thread is useful.

  Information about the host material with information on the nic and HBA drivers

• Get the specification of the full path of the file to Flash and QuickTime icons animation?

  How to get the specification of the full path of the file to Flash and QuickTime icons animation? I want the path and the file name contained in these icons. I use a "diving" to browse the icons to a file, and when I come on these two types of icons, I want to get the information above contained in them. I can certainly look in the Properties dialog box for this info, but there are a lot of icons in these files, and I want to generate a list of information based on different types of icons that I'm processing. Thank you

  Steve,

  When I tried GetIconProperty (IconID, #filename) as part of my 'dive', it worked when he met the QT icon. That is what I wanted.

  Not sure why it doesn't work with my small test case that has been a calc icon that followed a Falsh or QT icon.

  Thanks again for your quick response with the correct solution.

• get the dimensions in pixels of office?

  How can I query the findout the dimensions of the screen desktop system, the program runs on?

  I need to popup a window full-screen without borders, up to now, I had control of the hardware, so I know that the resolution of the screen (1920 x 1200), but there is interest in a system of "just an application" so I have to deal appropriately with different (probably smaller) resolutions pixels maximum.

  This window is basically a canvas tile controls programmatically created the only real question is so get the size of the screen running and creating tiles or print a message of error if the screen is too small for use (i.e. 800 x 600)

  -wally.

  int i, [9] w = {0}, [9] h = {0}, Nmonitors, monitor first, primary, [10] = {0}, albums [9] = {0}, left [9] = {0};
  GetSystemAttribute (ATTR_NUM_MONITORS & Nmonitors);
  
  	GetSystemAttribute (ATTR_PRIMARY_MONITOR, & primary);
  
  	GetSystemAttribute (ATTR_FIRST_MONITOR, &first);)
  
  	Monitor [0] = first;
  
  	for (i = 0; i<>
  
  		GetMonitorAttribute (monitor [i], ATTR_NEXT_MONITOR, & monitor [i + 1]);
  
  		GetMonitorAttribute (monitor [i], ATTR_HEIGHT, &h[i]);)
  
  		GetMonitorAttribute (monitor [i], ATTR_WIDTH, &w[i]);)
  
  		GetMonitorAttribute (monitor [i], ATTR_TOP, & top [i]);
  
  		GetMonitorAttribute (monitor [i], ATTR_LEFT, & left [i]);
  
  	}
  

  Thanks, the code snippet above seems to have all the info that I need to use only the CVI calls.  I usually mix CVI and Win32 call anyway, but this avoids having to dig up the documentation on the Win32 structure typedefs.

  Thanks for the links to the Win32 multi-monitor documentation.

  -wally.

• How to get the physical channel for USB card as ENET

  Hello

  For my application (VB .NET, using NIDAQmx 8.8), I need to access the 2 cards:

  a USB-6008 and an ENET9163.

  I would like to read the physical channels automatically with this feature NI-DAQmx

  Physicalchannel1ComboBox.items.AddRange (DaqSystem.Local.GetPhysicalChannels (PhysicalChannelTypes.AI, PhysicalChannelAccess.External))

  Unfortunately, he didn't get a single card at once.

  When the USB card is connected, he read the physical channels of the USB card

  When the USB adapter is not plugged in, it read the physical channels of the ENET card.

  I hope someone can help me with this problem!

  Thank you

  RB

  Hello RB.

  To read from multiple channels, you can enter in the drop-down list box "Physical channel", the comma separated channels, custom channels or if you read physics, the string "DevX/Benjamin: Z", where X is the number of device, and X and are the first and the last channel you want to analyze (for example to read to ai0 to ai4 from your device 1 enter "Dev1 / ai0:4"). Among the names of your channels, I guess they are global channels created in MAX? You can always read channels multiple and different advice by separating the comma.

  I hope this helps!

  Kind regards

• Impossible to get the specific features of cisco in LMS syslogs

  Hello

  It's about a problem that we face with our LMS 3.2.1. We cannot get specific cisco devices syslogs, while we are able to get the rest devices syslogs. one you suggest what would be the exact reason for this and the troubleshooting steps.

  Thanks in advance,

  Raja

  Hello

  The first thing I would say is to make sure that you have these devices configured to send the syslogs to that specific server. See config below:

  3725B - CR - NMS (config) #logging host?
  Host name or A.B.C.D IP address of the syslog server

  If that is already set up, please make sure that syslog messages are on the server. Create a message simple syslog and check the syslog.log file located in NMSROOT/CSCOpx/log to make sure it's written there. You can also run a capture of packages to confirm the foregoing. If you have this installed on Linux/Solaris, check the syslog_info file (/ var/log /).

  You can generate a test syslog as shown below:

  3725 B-CR-NEM #conf t
  Enter configuration commands, one per line.  End with CNTL/Z.
  3725B - CR - NMS (config) #exit
  B-CR-NMS 3725 #.
  * 03:35:42.613 13 Oct: % SYS-5-CONFIG_I: configured from console by admin on vty1 (192.168.10.197)

  NMSROOT is the LMS installation directory

  Let me know the results.

  Allen has.

• When you use the Polygonal Lasso with 13 elements, I get the message 'no pixels are not selected to more than 50% ' why and how to remedy?

  When you use the Polygonal Lasso with 13 elements, I get the message ' WARNING: no pixel is selected to more than 50 percent. "  Why - and how to fix it?

  Make sure that the correct layer is selected.

  Decrease the amount of feathers.

• How can I find (or at least get the specifications of) Dreamweaver CS6 layouts in Dreamweaver cc?

  Hello!

  I am a student of a course in web design, and many of our missions require that I use liquid layouts of Dreamweaver CS6. The problem is that I have Dreamweaver CC (who cut a large number of templates), and buy the old version for this class seems silly.

  Anyone know where I can find the standard CS6 layouts set to download? If not, anyone know where I could find at least plug on these layouts? I'm proficient in coding and web scripts, but I will not be anchored class points because I put a width of 75% instead of 80% or used an incompatible class name.

  Thank you very much for your help!

  If you have PCOC, you can also install free DWCS6 as part of your subscription to the CC...

  http://helpx.Adobe.com/creative-cloud/kb/download-previous-versions-creative-applications. HTML

  FWIW, CBWMS removes these old patterns because they were considered outdated or redundant (because they were just variations of a basic layout) HTML standards.

  You can download DWCS6 and have access to all of them, open one, save it in your site and switch back to CBWMS if you wish.

  As far as I know, they cannot be added to CBWMS, but you get the two programs as a CC subscriber, only, they do not work at the same time.

• How to get the weather channel videos to play in the Firefox update?

  Perfectly updated Firefox and Shockwave flash. Weather Channel videos cause a black screen with no option, but all the other sites I've tried seem to work well.

  Just for everyone's information...
  The problem turns out to be with Weather.com and Ad Block Plus. Weather.com has started adding ads at the beginning of their videos, Ad Block Plus blocks them like it's supposed to... The only way around this is to disable Ad Block Plus on the Weather.com site.

• multiplier table to get the specific size

  Hello

  I have two table the first on is 4 * 2 and the second a 2 * 1

  I need mulipliing to get 4 * 1

  It's my vi

  can any simple changes this VI for the result?

  Best regards

  Magnin

  
  

• Get the specific application stack screen Ui

  Hello.. I want to know is there a way for us particular screen of UI app backstack instance.

  For example:

  We have 4 screens in the stack Screen1-Screen2-Screen3-Screen4

  Now what to do if, after reaching Screen4 we get Screen2 instance (to remove only Screen2 backstack)

  According to documents UiApplication has getScreenBelow() method... But it returns only a screen below the active screen (in this case Screen3)

  So is it possible to set some tags at the time to push and to any proceeding in any screen after having detected this tag we can screen instance decided?

  You can call getScreenBelow multiple times.
  to identify a certain screen, you can use setCookie/getCookie.
  As an alternative, you can store a reference to your screen in a variable.

• Get the specification of multiple tables

  I've created in my project of many tables, and I want to get information about them in a format that is displayed in the object browser, when I select the table and open section/tab "table." After clicking on in appears the table with columns:

  Column name	Data type	Nullable	Default	Primary key

  and describes the table I have chosen before. the title of this painting is the link to download the CSV file that contains this description. How to obtain this information without loading and clickin all tables manually, it is possible to get an output to a file for tables selected before?

  You could do a select from one of the oracle of metadata tables for the information you are looking for: ALL_TAB_COLUMNS

  SELECT * from ALL_TAB_COLUMNS will show you what you probably want to...

  Thank you

  Tony Miller
  Software LuvMuffin
  Ruckersville, WILL

• How to get the numeric values with SCPI on an AG7034B

  Hello

  I use an Agilent 7034 osciloscope with 4 analog and 16 digital channels.

  Read analog channels is no problem, but how do I get the digital channels (101010) waveform?

  I see the digital signal on the screen of the instrument.

  And: I want to do with SCPI commands and read/write Visa.

  Thanks for all tips

  Do you really mean the DSO7034B? If so, there are drivers available for LabVIEW and other programming environments. I suggest you only start with one of these. Check your manual to become familiar with the controls.

  PS ad to the digital I/o Board is incorrect.

• Just, I got my rocket... and want to know about the Rhapsody channel.

  How do you get the Rhapsody channel on the "rocket"... I thought it came preloaded... but I guess that is was wrong.

  What is the point of the chain of Rhapsody?

  Im sure this has been asked before... but I want to know what it is and how I can get it on my rocket.

  Thank you!

  There are a variety of Rhapsodyschannel, in fact. Each channel is a different kind of music, essentially. Go to rhapsody.com to sign up (it's a service fee, not free) and then you can choose which channels you want to add to your rocket.