Impossible to get the specific features of cisco in LMS syslogs

Similar Questions

• After you have installed Windows 10 (don't like it) and go back to Windows 7 Home premium, impossible to get the Windows Update to run.

  After the Windows 10 update (don't like it) and go back to Windows 7 Home premium, impossible to get the Windows Update to run.

  Sorry, but KB3153199 has replaced two times at the same time. It takes the new version of the Windows Update client to correct known issues.

  http://support.Microsoft.com/kb/3161608

  Manual installation requires a continuous search to be interrupted. The value of the automatic updates to "never check updates" and then restart Windows.

  Best regards, VZ

• With the help of LR4 with Windows 8 - impossible to get the images to desempilement.

  Using LR4 with Windows 8 - impossible to get the images to desempilement.

  Right click on the picture, select stacking, select Unstack

• How to get the specific information of hardware and software data center

  How to get the specific information of hardware and software data center with powercli...

  What kind of information you need?

  No matter what Esxi host hardware info., if so could below thread is useful.

  Information about the host material with information on the nic and HBA drivers

• Currently, I have Photoshop CS5 standard and want updgrade to CS5 Extended to get the 3D features.  Is this possible, I don't see any CS5 update available?

  Currently I have Photoshop CS5 standard and upgrade to CS5 Extended to get the 3D features.  Is this possible, I don't see any CS5 update available?  I tried to download a new trial as well, but my current operating system will not support, so I would stick with a version of CS5 that will allow me to work in 3D.  What are my options?

  You can switch to CS6 extended for $400

  

• Just downloaded latest updates Camera Raw update for use with my new Sony RX100 M3 but still impossible to get the RAW files to open it. Any suggestions?

  Just downloaded latest updates Camera Raw update for use with my new Sony RX100 M3 but still impossible to get the RAW files to open it. Any suggestions?

  Nevermind, I finally got it to work, thanks!

• Get the specification of the full path of the file to Flash and QuickTime icons animation?

  How to get the specification of the full path of the file to Flash and QuickTime icons animation? I want the path and the file name contained in these icons. I use a "diving" to browse the icons to a file, and when I come on these two types of icons, I want to get the information above contained in them. I can certainly look in the Properties dialog box for this info, but there are a lot of icons in these files, and I want to generate a list of information based on different types of icons that I'm processing. Thank you

  Steve,

  When I tried GetIconProperty (IconID, #filename) as part of my 'dive', it worked when he met the QT icon. That is what I wanted.

  Not sure why it doesn't work with my small test case that has been a calc icon that followed a Falsh or QT icon.

  Thanks again for your quick response with the correct solution.

• Trying to get the Media Feature Pack. Get Windows Installer update is not applicable to your computer

  I am wanting to Windows Media Player 12. Site MS say I need the Media Feature Pack. I try to download. Gives me a choice of... X 64. MSU or... X 86. MSU. When I try or the other, I get "Windows Update Standalone Installer Update not applicable to your computer.

  It's win 8, I7, 8 GB of RAM chip

  Are you talking about Windows Media PLAYER or Windows Media Center?

  Windows Media Player is included in W8. On the start screen, type

  Windows Media Player

  and it should appear. then right click it and pine to the screen start then you can open it when you want.

  --
  Barb

  MVP Windows Entertainment and connected home

  My Blog - http://digitalmediaphile.com/

  Connected world Blog Reader Windows 8 App Barb-
  http://apps.Microsoft.com/Windows/en-us/app/barbs-connected-world-blog/02f35769-52bf-461C-b1d5-06e54a58d298

  Windows and Surface drive Windows 8 App community
  http://apps.Microsoft.com/Windows/en-us/app/Windows-and-surface-community/0abb150e-D287-47d4-837E-9fa51f485ad7

  Please mark as answer if that answers your question

• College Dorm Internet - impossible to get the printer connected wireless

  First of all, let me say that I have 3 OfficeJet Pro 8600.  The printer of love.

  Second, here is a part of the background of my situation:

  Bought OJP8600 for son go to College.  In the dormitory, it is wireless which is encrypted.

  WiFi@OSU is a front-end which feeds on the more robust secure portal, which leads to connect to osuwirless.

  Can easily get its HP Pavilion on the osuwireless network.  Name of user and password... no sweat (through the secure portal).

  But when I configured the printer... She grabs the WiFi@OSU router and he seems happy.  Problem is that computer of this son is on the osuwireless network.  When I try to select xxxwireless on the printer, I get an error of encryption or application not valid.  Duh.

  Then... I'm guessing that a network administrator will need to add the printer?

  I used a cable ethernet to connect to his laptop computer and that works.  Awkward, but works.  Suppose that I could also connect via USB, but also clumsy as it is to connect the wire whenever you want to print.

  Thanks for bearing with me... here's my questions:

  1. cannot get the HPDirect to work... maybe I don't understand what he does?  I can see the host name in internet connections, but can not get the phone to connect to anything mode other than "limited".

  2. a BlueTooth adapter would be an option?  I know that my 8600 didn't BT resident.

  Thanks for reading and your suggestions.

  M61

  Hello

  You try to open your printer can be used by everyone. The safest way is the use of USB cable.

  Kind regards.

• have 2 admin accounts and it is impossible to get the option to remove one of them

  I created for the administrator accounts and cannot get the option to remove one of them. I want to delete that won't give me the option to delete all it will let me do is change the password, it says it will allow me to change the picture, but when I try blank on the login screen is displayed. I can't change it even for standard user if I am logged in under the account of other admin. what I want to do is get rid of all my accounts and re-created them correctly like the one that I can't delete will sometimes pop up for password when I want to install something when I am connected with the other account.

  Is it possible to reset all our and start from scratch? I think it happened when I made some changed account policy local when I couldn't get a regular with my admin account setup program and now I don't know how to cancel it.

  I do not have to reinstall windows just to get this problem resolved... There must be an easier way.

  Thanks in advance

  Brenda

  For the guest account - I have a little poorly stated.  You * can * remove, but it is not recommended to perform this (possible to unintended consequences.)  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-desktop/deleting-guest-account/5a116d33-0056-47CA-B51A-b6615b90e160

  Administrator account - as far as I know you just cannot delete the built-in one.  Whichever one you can NOT remove - who is integrated. * smile *.

  Rename you accounts?  If not - it is one called "administrator."  Alternatively, you can use a registry setting to understand - but really the name should give it (if you have not renamed - and even if he did you rename... You renamed, you must know what you renamed to) the description of the account should be, "the computer or to the domain administrative account '...

  At the end of the day - you must remove only the accounts you know * you * created.  Ignore the rest.  Windows is/has been / will probably always be a multi-user even system when it is used by a single user.  He has accounts that are doing things in the background at almost any time.  Better than to let them be - unless you like instability.

  Whenever you install something (attempt to) as a normal user, it should appear and ask you an administrative level account - but you can select 'other' and put in ANY account of administrative level on this machine, you know the credentials. ;-)

• I have updated Camera Raw to the last update, but I am unable to get the new features. Can someone tell me what I should do to get the new features?

  Help with the new Camera Raw update!

  Own CS6?  Camera Raw 9 now available

  As mentioned here, updates to Camera Raw in Photoshop CS6 include only new camera support, lens profile support and bug fixes.  The new features listed in the release notes are available in Photoshop CC.

  
  

  New features

  Merge HDR and Panorama CC only.

  You will have to go with the , Lightroom and Photoshop | Plan of creative photography of cloud to Adobe for new features in ACR.

• How can I find (or at least get the specifications of) Dreamweaver CS6 layouts in Dreamweaver cc?

  Hello!

  I am a student of a course in web design, and many of our missions require that I use liquid layouts of Dreamweaver CS6. The problem is that I have Dreamweaver CC (who cut a large number of templates), and buy the old version for this class seems silly.

  Anyone know where I can find the standard CS6 layouts set to download? If not, anyone know where I could find at least plug on these layouts? I'm proficient in coding and web scripts, but I will not be anchored class points because I put a width of 75% instead of 80% or used an incompatible class name.

  Thank you very much for your help!

  If you have PCOC, you can also install free DWCS6 as part of your subscription to the CC...

  http://helpx.Adobe.com/creative-cloud/kb/download-previous-versions-creative-applications. HTML

  FWIW, CBWMS removes these old patterns because they were considered outdated or redundant (because they were just variations of a basic layout) HTML standards.

  You can download DWCS6 and have access to all of them, open one, save it in your site and switch back to CBWMS if you wish.

  As far as I know, they cannot be added to CBWMS, but you get the two programs as a CC subscriber, only, they do not work at the same time.

• Impossible to get the CF 9 Admin to connect to the IBM/DB2 server

  I'm trying to set up a new Data Source in ColdFusion 9.0.1, CF Admin, to connect to the database/server of my company IBM/DB2.  The server IBM itself is 64-bit, and I use my computer at home with Windows 7 Pro 64 bit.

  We use the customer IBM/DB2 version 9.5 FixPak 4.  It is available in 32-bit and 64-bit versions.  I downloaded both and the 64-bit installed driver and it does not work.

  In Control Panel/ODBC Data Sources, System DSN tab, it shows the IBM DB2 ODBC Driver.  I have it configured with the correct host name, name of the comic, user name and password, etc., and fine tested connection here.  When I click TEST CONNECTION, the answer is 'successful connection'.

  But when I go to CF Admin and add this as a Source of data, using ODBC Socket, it shows my connection "named" Control Panel/ODBC.  But when I try to connect, I get the answer: "UNABLE TO VERIFY for the opening of SESSION and an ARCHITECTURE MISMATCH."

  Question: CF 9 Admin does support 64-bit ODBC drivers? Wonder if this is the reason why Windows ODBC will make the connection, but Admin CF won't.  If so, I could uninstall the 64-bit driver and install the 32-bit driver and try again.  Given that few people at work know ColdFusion, I don't have a lot of support here.

  I installed the 32-bit driver on my Windows 7 desktop PC, but it has Windows 7 32 bit.  I have also updated the drivers on several Windows XP SP2 client computers, using the same IBM DB2 Client, but the 32-bit version.  All of you who work very well in CF Admin.

  Hope someone has tried this and has some tips on how to connect to a database of IBM/DB2, CF 9.0.1.  And if Admin CF9 supports 64-bit to connect drivers to other sources of data?  FWIW, all my other Admin SEE data sources (various company Oracle and other servers) work correctly in CF Admin, but I use the default ORACLE supplied with CF9 drivers.  I can't use integrated DB2 drivers for CF9, they are not compatible.  You must install the IBM DB2 client, in order to connect to the database/server IBM.

  Thank you for any help or advice.

  Gary

  Finally got the drivers IBM DB2/JDBC installed, configured and running on my Win7 64 bit PC.  Should be the same game on our server Windows Server 2008 R2 production at work, so am all together.  Still using CF 9.0.1 64-bit, fortunately.  It's the 2nd JDBC connection, I was able to set up correctly (using 'OTHER' as the DSN), including Teradata JDBC.

  When you download and install the IBM DB2 9.5 IBM drivers, you will find 2 JDBC drivers, you will need, including a JDBC class 4 driver, on your hard drive (in the folder: c:\Program Files\IBM\SQLLIB\java).  DB2 drivers that come with CF9 are for mainframe DB2 and do not work in the DB2 server environments.  Although we have 4 IBM 3090 mainframes, I needed that connection to our data base 30-Server DB2 Warehouse.  After 4 months of trying, finally figured it out and it works fine.  And just as fast, or faster, than the connection ODBC 32-bit that we use on our older servers, 32 - bit.

  That I did not "understand is that even after the Adobe technical support call, they were without help.  They wanted $250 for a call of 'pay-per-incident', and there was probably no guarantee they would have the answer I needed.  Here is the answer I realized myself today.  Hope it helps others and saves the cost of an expensive phone call (or hours of Googl'ing).

  Here is the procedure, if it helps someone else. Or if you had to get rid of your DB2 32-bit ODBC Socket connection and try the class 4 JDBC drivers that run on machines of 32 or 64-bit.

  1 copy these 2 files in your root CF bin folder (for example, C:\ColdFusion9\lib) db2jcc4.jar and db2jcc_license_cu.jar

  2 Add db2jcc4.jar and db2jcc_license_cu.jar to Java and JVM paths (restart CF application server)

  3. URL JDBC: jdbc:db2: / / MyServerName:MyPort / MyDBName

  4 driver class: com.ibm.db2.jcc.DB2Driver

  5. Enter your user ID and PW and SUBMIT.  No connection string is necessary, and no other change in advance settings.

  When I got the Green letters that said 'connected successfully', I was thrilled.  So I ran some queries to test, and they all ran fine and fast.

  As mentioned, been trying for months find this procedure by manually configuring the drivers JDBC is something new for me.  It is not difficult, but if you never did, you don't really know, do you use?  In any case, I hope this helps someone else using a PC/Server 64 bit.

  Gary

• Impossible to get the JPG files to open in ACR

  Hi all!

  I just reinstalled CS3 (and the 10.0.1 associate patches) on a new MacBook Pro and I can't get the JPG files to open in ACR.  I checked the checkbox is set to on screen preferences Camera Raw 'Always open files with settings using Camera Raw JPG', and my NEF files open in ACR very well, but will not open JPG files.  I have the same problem with TIFF files... I have the box ticked, but when I drop the files on the Photoshop icon, they right in CS3, not open cab.

  I can get him to open in ACR by choosing open..., by selecting the JPG file, and then change the format to "Camera Raw", but this does not work in my workflow with Lightroom.

  Has anyone seen this problem and know a fix?  It's a setting somewhere?  My old laptop is configured exactly the same (I think), but JPG files will open directly in ACR without problem.

  Thanks for any idea... appreciated!

  John

  For CS3, you have the right settings in ACR preferences, preferences of Photoshop and preferences of the Bridge .

• Impossible to analyze the first user name of variable LMS

  Hi all

  I'm looking to use the LMS username as a variable in my class.

  I used the following link to get the value of the variable: display name of your LMS using Adobe Captivate to the 6.x - CaptivateDev.com student

  I pasted the following in my action SlideEnter javascript code...

  The PROBLEM is it shows Lastname Lastname.

  I want just the name of the user.

  Thoughts?

  ------------------------------------------------------------------------------------------ ------------------------------------------------------------------------------------------ ------------------------------------------------------------------------------------------ --------------------------------------

  /* Calling a self-invoked function to not pollute the global scope and immediately destroy the scope chain */

  (function(){

      /* Initialize JS Variable to hold the student name */

      varsName='';

      /* Obtain the student name from the LMS and put it into a JavaScript variable called sName */

      if(typeofwindow.GetStudentName==='undefined'){

          sName='Name Not Found';

      } else{

          sName=GetStudentName();

          if(sName==''){

              sName='Name Not Found';

          } else{

              /* Uncomment the below line to show the name in 'First Last' format */

              sName=sName.split(', ')[1] + ' ' + sName.split(', ')[0];


          }

      }

      /* Check for HTML5 vs. SWF output */

      if(typeofwindow.cp==='undefined') {

          /* We have SWF output, so Get the Captivate Object */

          varobjCp=document.getElementById('Captivate');

          /* Set the studentName Captivate User variable with the JavaScript variabe, sName */

          if(objCp && objCp.cpEISetValue){

              objCp.cpEISetValue('m_VarHandle.studentName', sName);

          }

      } else{

          /* We have HTML5 output */

          if(cp.vm && cp.vm.setVariableValue){

              cp.vm.setVariableValue('studentName', sName);

          }

      }

  })();

  ------------------------------------------------------------------------------------------ ------------------------------------------------------------------------------------------ ------------------------------------------------------------------------------------------ --------------------------------------

  Details: Captivate 8

  LMS appears under the name form, first of all.

  Figured out how to change the line of javascript in question.

  Normally the StudentName is listed as: name, first name

  To JUST display the first name use this-->sName=sName.split(', ')[1]