Get the UUID of my Black Berry Device/Simulator

Similar Questions

• Problem with the installation of the App example in Black berry device

  Hello

  Hello World sample, I developed and I would like to install the application in the device of black berries? What are the conditions to do this? and in the emulator when I click emulator displaying these dialog box i.e.

  'display the keyboard '.
  Switch application
  full menu» I don't want to see this dialog box. Please guide me how to solve,

  Thank you

  S.Seshu

  Regarding the deployment of your application, take a look here:

  https://developer.BlackBerry.com/Java/download/testing

  In this case removing the standard Menu items, please search the Forum, from memory, this has been asked before.

• I keep getting the message "there are no lightscribe devices in this system.

  I keep getting the message "there are no lightscribe devices in this system.

  I tried to open the recommended site for updates, but I get an error messasage.  Can you help me?

  Follow article

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?lang=en&cc=us&ObjectID=c01900020&JumpID=reg_R1002_USEN

• In Sonic I get the message: no recordable or rewritable device compatible could be found on your system

  No window menu drop-down is displayed when I insert a music CD.

  When I try to open SONIC, it does not open and a window pops up with the following: no recordable or rewritable device compatible could be found on your system.

  This happened after MS fixed a couple of viruses.  The CD will be displayed in the start menu;. Explorer, but no fall to the bottom of the window that appears after you insert the disc.  Sonic will not open and I get the above message.  I can always write to a CD and play them but loss of Sonic is boring.  I have a DELL 2400 PC w / XP Pro 32 bit.  I also have the original sound installation disk.  Help

  Go to the Dell site and download the SoundMax driver.

  I installed on my 2400 of Secunia and Sonic is listed as end of life (no longer supported).

  Also uninstall Sonic.

  I hope this helps.

• Get the phone number of BB 10 device using blackberry.identity.phone.getLineIds)

  I am trying to retrieve the phone number of a unit of BB 10.  Testing with the ripple and the BlackBerry 10 Dev Simulator.  I tried many variations, and when the code runs is always that the phone is not always defined.  All the world made a call to blackberry.identity.phone.getLineIds () or blackberry.identity.phone.getLineNumber ()?

  If so, post you the code and the config.XML you used to get this working?

  I saw this post, and I tried the example code that is supposed to work, but I can ' t get the code working list.

  http://supportforums.BlackBerry.com/T5/Web-and-WebWorks-development/BlackBerry-identity-phone-doesn-...

  Hello

  That API is not supported on BB10 (only BBOS).

• get the current speed when executing sentences nmea Simulator

  Hello

  I'm having a few problems getting GPS simulators to give me the current speed.

  I was wondering if anyone can tell me what I'm doing wrong?

  I have log NMEA files that have been captured many actual trips as I pushed it, these NMEA files were also taken from a variety of different material.

  These range from relatively short trips about simulation files 20 minutes to long trips which are + 6 hours.

  On other development platforms (Nokia/android/java mobile) I successfully uses these files to simulate roads when debugging my application.

  I tried to complete my request and provided GPS sample and don't get any information about the speed of the location provider.

  at my request, that I can access debug the following NMEA sentenced $GPGGA & $GPGLL by calling;

  Location.getExtraInfo ("application/X-jsr179-rental-nmea");

  However, none of them have speed information associated with them.

  and the Location.getSpeed () method always returns 0

  so this all leaves me a bit stuck, I have two machines of development here, one with windows 7 64 bit and a windows XP laptop, I have read several posts that say windows 7 is not really supported, so I tried it on my old machine but still no luck.

  If someone is able to get the speed to import a NMEA trip, would it be possible to provide me with a sample of these sentences so I can try and run this.

  the steps I take to run my file in the Simulator are as follows:

  Simulator of boots...

  simulate the menu - > select GPS location

  GPS location dialog box appears-> press adds buton in the section of the road

  Select "data from a file.

  Select nmea log file

  Select the button Edit in the section of the road

  Rename the route

  Press the button Save

  Press the play button in the section of the road

  launch application

  the version of the Simulator uses is "Simulator of Smartphone BlackBerry 2.13.0.140.

  I use eclipse with the Blackberry Java plug in 1.1.2.201004161203 - 16

  I'm happy to provide anyone interested in a copy of the GPS logs that I use.

  If I can't get the speed work, I guess I can use the phrases $GPGGA & $GPGLL data to calculate, but I prefer not having to write specific debugging code.

  Thanks in advance

  Guus Davidson

  Thanks for your comments,

  I have given up trying to understand what the problem is and have written a simple NMEA parser.

  Out of curiosity, I am still interested if anyone has had this work

  concerning

  Guus

• With the help of TestStand to get the number of errors from a device

  I use TestStand to communicate with a device that tests itself. TS has just appealed a DLL which, through a channel series learns how many errors the device had for each test (such as ethernet). It must be continuously for each test for approximately 3 days. While I realize that this is not the way that TS is supposed to work, due to the end already be finished I just simple settle.

  My question is:

  What is the best way to organize the test steps (calls DLL that returns the number of errors) and the results? I looked at just looping through a test sequence, but this would result in millions of individual results altogether? Is there a way to update the same result for a stage, when it is called 1000 times?

  Thank you

  Add each error to a variable in a loop that runs for 3 days. Save the variable data to the report at the end.

• No sound on the computer and not getting the error "no available active mixer devices".

  Original title: sound problems

  Hi, my name is JF. I'm having the VERY SAME problem. A few weeks all of a sudden all I hear is silence. NO SOUND!  I bought new speakers and nothing.  He said: no available active mixer device.  I have a Dell Optiplex GX620 desktop computer, not a laptop.  Please help.

  Hi Juicyface,

  · What is the service pack installed on your computer?

  Method 1:

  Check the status of the device in the Device Manager and check if it has no yellow exclamation or a question mark, and if no error code is listed in its properties. To do so follow the steps below:

  a. click on start

  b. in run box type: devmgmt.msc

  c. search for audio device

  Method 2:

  Run the fix it and check the results. Link: Diagnose and automatically repair audio playback problems:http://support.microsoft.com/mats/no_sound/en-us

  May you enjoy a look at the link below: how to troubleshoot sound problems in Windows XP:http://support.microsoft.com/kb/307918

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• For the operation of broadcasting how can I get the current network address of BB device

  Hello

  I'm new to the development of BB. I want to develop a Java application or servlet I can send order button to my client devices on BES... I would like to know a few things

  • First of all know if its possiable to apply a base or servlet Java?...
  • How to know current network address of the BB device that uses BES...

  Experts of BB please help... I would like to know I can start with...

  Thanks in advance...

  (I'm in the right forum for these questions)

  Hello

  When you tap on a BlackBerry smartphone, push you to address email or PIN code associated with the device. These can be already known or read the BES.

  Push of browser channel can certainly be handled from a Java application, check on the HTTPDemo (server side) included with the BlackBerry can and JDE plug-in for Eclipse (eJDE) that shows this.

  http://NA.BlackBerry.com/eng/developers/javaappdev/devtools.jsp

  http://docs.BlackBerry.com/en/developers/deliverables/10155/index.jsp?name=http+push+sample+applicat...

  Kind regards

• Can I get the IP address used by other devices for synchronization?

  One of my machines was stolen. I wanted to know if I could find it using the synchronized information. I hope that there is a way to determine the IP address, and then contact the owner of this IP block to see if they can help me more. Is this is possible, and if so, what steps should I take? Thank you.

  It is a question that we receive from time to time, and no, this is not possible. Please contact the police for your inquiry.

• After the resizing of an image (from 150 mm in height to 500 mm with a resolution of 150), I get the results overlaid with black bars?

  

  Hi alexk,.

  Greetings!

  Seems to be a problem with the graphics card driver.

  Please follow the steps below. :

  Go to Edition-> Preferences-> Performance (Windows) | Photoshop-> preferences-> performance (MAC)

  Uncheck-> use graphics processor

  Click Ok

  Restart Photoshop.

  Repeat the steps you did.

  Concerning

  Jitendra

• Get the IP addresses of the devices connected to the WiFi network

  Hello guys,.

  I've been looking around and trying to understand this point, but I don't have a solution. The problem is to get the local IP addresses of all devices connected to the WiFi point of access/router connected to my BlackBerry. Similar to the way in J2SE nature you can get the IP using InetAddress.getLocalAddress () and then browse ip addresses and call InetAddress.getByAddress (ip) to check whether the device is accessible. Possible is something similar in BlackBerry or not?

  No, the fault was entirely mine, I misread your message.
  no idea how to do that, there is no access from low level of the network interface and the API is really limited.

• How get the address of device paired programmatically

  HELLO developers,

  Is it possible to get the address of the paired device, my goal is to get the address of the device so that I can make a chat message with this device based on its address of device.

  Thank you very much

  sujithRavindran

  You can use the BluetoothSerialPortInfo.getDeviceAddress () method to get the address of a paired Bluetooth device.

• How to get the underlying material UUID

  That is the question: is it possible to get the UUID of a guest operating system (Windows) underlying material to prevent virtual machines to copy to another host? In other words, I need a way to detect that a virtual machine with my active software have been copied to another material. My protection is based on the MAC address of the NETWORK card and the card mother UUID.

  Thank you in advance.

  The VMware tool exposed not something of special for you in the key out of... There is a way to define custom attributes in the .vmx file, which can then be extracted with the client, the problem with this is A) you must add an entry in the .vmx need still the privileges that we discussed B) this can be blocked by defining specific within the .vmx security entries for do not allow this information

  I would recommend you contact VMware for the best approach to this problem and certainly sign for TAP

  =========================================================================

  William Lam

  VMware vExpert 2009

  Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/

  Twitter: @lamw

  repository scripts vGhetto

  Introduction to the vMA (tips/tricks)

  Getting started with vSphere SDK for Perl

  VMware Code Central - Scripts/code samples for developers and administrators

  VMware developer community

  If you find this information useful, please give points to "correct" or "useful".

• How to get the external hard drive to connect to VMWare Player?

  Hi all

  I currently have VMWare Player 3.1.4 and that you have a VM installed on an external SSD that works very well.

  The guest operating system is XP and host operating system is OpenSuSE 11.4.

  The problem is that I have another external hard drive that I want to connect to the virtual machine to store files and other (WD Scorpio Black 320 GB).

  So what I tried was when I opend VMWare Player, I went to add a new SCSI device, found the hard drive, I wanted to use and created it. But when I go in-> "VM" > "Removable devices" > "generic SCSI (SCSI 0:1) ' > 'Connect'-> I get the below error message.

  Device virtual scsi0:1: could not open the device host "/ dev/sdc": not sufficient permissions to access the file. Please make sure that the virtual device is configured to use a Linux generic SCSI device (/ dev/sg *), and that the physical device works normally on the host computer.
  Cannot connect the device virtual scsi0:1.

  Does anyone know if I'm doing something wrong? What are the permissions are they talking about?

  Thanks in advance,

  Matt

  Are back at the office and tested on a variety of Linux Ubuntu and was able to add a second drive HARD/dev/sdb as a physical and even disc was also able to boot from it even if it needs to be dismantled first and I had to start VMware Player using sudo, because I was using a standard account both add the disk and run the virtual machine with the added disk.