Get the variable with an expression of substring

Similar Questions

• I still get the update for 2005 express edition SP4 on my automatic updates

  Windows XP version 2002 the home Ed.

  I have Windows XP Home ed. 2002 version on my laptop, I get the update for 2005 express edition SP4 on my automatic updates. Should I ignore it?

  You missed to type exactly what says the photo at the top of the first window I had open to you.

  You typed the name of the product by typing the name of full patch available for you.  "Microsoft SQL Server 2005".  This is the product that is the update for.

  This site, the site of Windows/Microsoft updates and - well - any web site of Microsoft is not * my * web site.  Like you and many others who ask questions and answers on this forum, I am just a user of the products in question.  You do not normally talk to Microsoft in any direct way (or representative) in these forums.  There are Microsoft employees that could pop and answer a few questions here and there-, but for the most part paert - just people devote time and knowledge freely.

  Now, back to your question.  Looking at article in the Knowledge Base Microsoft (KB) for the update that you say is offered:
  http://support.Microsoft.com/kb/2463332

  He said one of these products:

  • Microsoft SQL Server 2005 Analysis Services
  • Microsoft SQL Server 2005 Developer Edition
  • Microsoft SQL Server 2005 Enterprise Edition
  • Microsoft SQL Server 2005 Enterprise Edition for Itanium-based Systems
  • Microsoft SQL Server 2005 Enterprise Edition X 64
  • Microsoft SQL Server 2005 Express Edition
  • Microsoft SQL Server 2005 Express Edition with Advanced Services
  • Microsoft SQL Server 2005 Reporting Services
  • Microsoft SQL Server 2005 Standard Edition
  • Microsoft SQL Server 2005 Standard Edition for Itanium-based Systems
  • Microsoft SQL Server 2005 Standard Edition X 64
  • Microsoft SQL Server 2005 Workgroup Edition
  • Database internal Windows

  Could be the reason that this particular update is offered.

  As a general rule, given you have Windows XP, would you install updates critics/high-priority updates from Microsoft, or Microsoft/Windows Update web site.  The optional parameter is only... As an option.  Most of the people here would agree - you should avoid all non - Microsoft drivers for hardware devices available from automatic updates from Microsoft, or Microsoft/Windows Update web site.

  -If you install this update?  Yes.

  Why?  You have the a product mentioned above installed and it needs patches.

  What happens if you have trouble to install the update?  The web page I've linked to the KB article has a section "Troubleshooting Windows update issues" - use if you have problems with this update of Windows.

• Get the date with the millisecond of the table

  I want to get the date with milliseconds in table format in the variable. How to get there?
  
  SQL > create table test_date (col1 date);
  
  Table created
  SQL > insert into test_date values (sysdate);
  
  1 row inserted
  
  SQL > commit;
  
  Validation complete
  
  SQL > select * from test_date;
  
  COL1
  -----------
  18/12/2009
  
  
  Here I have to get datewith "millisecond" format and put it into the variable varchar2 (50) and pass this
  to Java.
  
  
  SQL > select to_char (COL1, ' mm/dd/yyyy hh24:mi:ss. FF') of test_date;
  
  Select to_char (COL1, ' mm/dd/yyyy hh24:mi:ss. FF') of test_date
  
  ORA-01821: date format not recognized
  
  SQL >
  
  Thank you
  Khaldi

  user601042 wrote:
  I want to get the date with milliseconds in table format in the variable. How to get there?

  SQL > create table test_date (col1 date);

  Your data col1 type should be TIMESTAMP.

  See you soon
  Sarma.

• I can't create a shortcut to the site on my desktop, when I click on the url bar I can drag on the browser to open a new, but as I drag him on my desktop I get the circle with the line through it, one that looks like a no entry sign. Help?

  I can't create a shortcut to the site on my desktop, when I click on the url bar I can drag on the browser to open a new, but as I drag him on my desktop I get the circle with the line through it, one that looks like a no entry sign. Help

  Try to drag the image to id web site (favicon) on the left side of the address bar, instead of the URL.

• C20/SX20: is there a way to get the cdr with loss/jitter of the stats?

  I'm trying to get a report with loss/jitter, but doesn't cdr can not find a way to do it.

  (a) TMS is able to report COR but only on the participants/duration/encryption/protocol of appeal

  (b) C20 web gui has information but only with a number of clicks on and only for a call each time

  (c) API C20 (cli) I found some commands, but nothing for the loss/jitter
  I tried xstatus Diagnostics appeal channels-> only for calls in progress.
  tried xHistory recent CallLogs | Call-> nothing usable

  Is it possible to get the cdr with jitter/loss for each C20/SX20 counters in a framework?

  Methods to obtain these data is exactly what you have listed and must be carried out during the call.

• How to get the variable 'dn' in a script

  Hello

  I have a problem, get the variable "dn" of the script is not a "public" variable, but I'm able to see in the log file. I bet it's in an object java somewhere - I don't know how to access it. No one knows how to get it. I have attached some of the newspaper:)

  CN = 8485 [5-6] XX, dn = 8485601 = 9812 cgn, ani = null, dnis = null, clid = null, atype = FORWARD_ALL lrd = 9817, ocn = 9817,

  I have a similar problem but I did not find the repo. package... Where?

  Thank you

• How to get the variable substitution essbase in ODI

  Hi all
  I have a problem that I need to get the variable substitution of Essbase /EAS to work on a SQL in ODI.
  How can I do in ODI?
  Thank you all for...
  
  Thomas

  Hello

  If you read my blog:-http://john-goodwin.blogspot.com/2009/11/odi-series-planning-11113-enhancements.html
  In the post, there is a section on the recovery of the essbase substitution variables and their use in ODI.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Can a Flash SWF embedded save and get a variable with the drive?

  My SWF content contains text in different languages.  The user selects a language and it appears.

  Is there a way to store this setting locally so that the correct language is displayed when the pdf file is reopened?

  I only need a two-letter string, such as "EN", "FR", "ZH", etc., and the SWF file takes care of the rest.

  I tried calling multimedia_saveSettingsString of SWF Actionscript, and I tried to set a global variable in Acrobat and local setPersistent using Actionscript and .js files. It works in Acrobat, but not the reader on a users system.

  I also tried to use a separate pdf form to store a global variable and then tried to get this variable using the SWF Actionscript.

  Could it be a problem with Acrobat properties or security settings?

  I'm not a virtuoso, would help the sample scripts.

  (Windows 7; ActionScript 3; Acrobat 9 and XI are available; Adobe Reader 9 is installed base, but I may be able to move to a more recent version of the player)

  I asked a similar question in the Acrobat Javascript community, but didn't get any response. I have here reformulated with additional details

  Thank you.

  Here's my example section linking to the Save and Load buttons. evalText, infoText and replyText are the three fields TextArea.

  Note that it is important to send a string and returns an object and cast it to a string. EI.call () has no idea what is sent to JavaScript.

  // button handlers
  butSave.addEventListener(MouseEvent.CLICK, doSave);
  
  function doSave(e:MouseEvent):void {
      var rtn:Object = ExternalInterface.call("multimedia_saveSettingsString",evalText.text);
      if (rtn == null) {
          infoText.appendText("Save: REPLY = null");
      } else if (rtn.toString() == "") {
          infoText.appendText("Save: REPLY = empty string");
      } else replyText.appendText("Save: reply = " + rtn.toString());
  }
  
  butLoad.addEventListener(MouseEvent.CLICK, doLoad);
  
  function doLoad(e:MouseEvent):void {
      var rtn:Object = ExternalInterface.call("multimedia_loadSettingsString");
      if (rtn == null) {
          infoText.appendText("Load: REPLY = null");
      } else if (rtn.toString() == "") {
          aT(infoText,"Load: REPLY = empty string");
      } else replyText.appendText("Load: reply = " + rtn.toString());
  }
  

• Debugging the XML Variables with watch Expressions

  
  I have a Flex demo application I am debugging. There is a variable defined as follows:
  
  var itemToUpdate:XMLList
  
  If I add a trace statement as follows, I am able to see the value of the quantity displayed in the Console:
  
  trace (itemToUpdate.Qty); <-it works!
  
  But if I add an "Expression" in the debugger, like this: "itemToUpdate.qty." I get the next value in the 'Expressions' debug display: "< errors during evaluation >.
  
  What I am doing wrong? Why can't I add watch expressions for a type of XMLList?
  
  Version: Flex 2.01

  As has been pointed out by Amy, watch flex debugger cannot evaluate expressions e4x, however, you can assign the value of a string and watch the channel. This will not allow you to change the value of e4x on the fly if that's your goal, but it is nevertheless useful to simply see what is affected without setting breakpoints and manually search in the list of properties for the desired value. If you are evaluating a single xml node and that you want to display the entire xml code be sure to use the method. toXMLString().

  assuming that the quantity has a value of 12:

  var val: String = itemToUpdate.qty;
  implicit cast results in val is "12", even as itemToUpdate.qty.toString)

  but

  var val: String = itemToUpdate.qty.toXMLString ();
  Let the intact on a single node xml syntax, val would be "12".

  I hope that I don't confuse the subject, good luck.

• Unable to get the max with Intel pro 3945ABG card Wlan download speed

  Grettings all,.

  I have, as the shows theme, a model of router Philips SNB650 and Intel pro 3945ABG wireless card.
  The card supports up to 54Mbps while the router can handel upp to 108mbps. The router is in the same room as my laptop and I recive full force and 45mbps connection. I also have an internet connection of 100/10 Mbps (100 downwards, up to 10). The problem is that I can never reach maxlimit when I download files.

  One I download since has the same connection as me, and through him, I get 1.45mbps, which is normal with our two connections. However, when I download it and other sources, I never reach more than 1.45mbps a total, counting all together downloads. So when I download 1.45 my brother and someone else, something with connection equalent, the download speed of my brother will decrease, as well as the other connection.

  I contacted Philips suport and asked if he could be a setting in the router which does the job in this way, but the answer I got was that I should turn on max-double-sided. I know where to find it, even if they described in their message. Network connections-> network-> properties-> advanced card and it make the change with the duplex mode. But the only option for windows, built in firewall.

  I searched on the net for possible solutions, but found nothing. However, I found a few tips about the wireless network card. And that's to go to the device run-> ECS-> NIC in question and make a few changes, such as: Power management (max game, have you tried other variants), roaming Aggressivness (set to max, have you tried other variants) and transmitting power (max by default, tried other variations).

  None of the above configurations makes no difference to my network speed. So, now I turn to you, to see if anyone has a solution. Is there a way to change the duplex mode for all wireless network cards?

  Perhaps I should mention that I have the latest drivers for my network card, but he had the same problem with the 'old'.

  Thanks in advance,
  / Martin

  Hello

  I would try to explain what I understand what you're saying.

  Even with a 100/10 connection does not mean what download you to. There are a few Web sites on the internet that test true download you have. You might want to try one, because I never downloaded to my max download rate.

  It entirely depends on many variables. The Web site you download from (they could cap their downloads to customers at 1 Mb if they chose) etc. Could be your ISP that has the problem etc.

  I doubt the computer or settings are the problem. Call your service provider and ask them what the problem is.

• Cannot send the PDF with Outlook Express.

  PROBLEM SENDING FILE PDF WITH OUTLOOK EXPRESS.

  Here's what's happening.  I created a PDF file in adobe 4 pages, I can reach the PDF file to a mail sent in Outlook Express, but I see where he treats of it says part 1, part 2, part 3, all the way to part 7, when there are only four pages.  The recipient gets 7 different emails and cannot open an any of them.    I have a yahoo email and I can send the PDF file there.   Just frustrating.  I use Windows XP.  Not familiar with computers but I would like someone to tell me the problem.  It has worked before and I don't know what happened to create the question.  Thank you.

  Tools | Accounts | Mail | Properties | Advanced. Uncheck the box: "Break apart messages...". ».

• How to get the details in an expression

  Hi all

  Just start with vsphere powerCLI again and I wanted to understand the basics of hash tables. I've been running this command as below:

  Get - VM VM1. Get-View | Select-Object Name, @{N = "ToolsVersion"; {E = {"$_.config.tools.toolsVersion"}}

  and I wanted to understand:

  1. am I correct assuming that by this, we create a new Toolsversion property object?

  2. How can I retrieve all the values that are available to me? Specifically, I want to ask from where comes this expression comes, E = $_.config.tools.toolsVersion and how to find all the expressions that are available to create new properties.

  THX,

  AJ

  1. Yes, the Select-Object cmdlet will produce a new object on this object, you have a new property called ToolsVersion

  You can see by channelling the results of the Get-Member cmdlet.

  2. with the cmdlet Get-View, you get the vSphere .net object object.

  These objects of vSphere are described in the VMware vSphere QAnywhere

  In this particular case, you can check the VirtualMachine object.

• PowerCLI Invoke-VMScript re - ip guest - how to get the variable hostname comments

  I run the following script as a task Post-Power-we a re - ip our VMs after that MRS. them rocking.  I was able to run this script successfully without the variable hostname of comments (in the test, he runs a script by test VM with the hostname assigned...), but I'm stumped on how to get comments variablized according to the machine's host name works on, it will take the host name and use it in the GuestUser variable and the command - VM.  I tried the bold part, but it does not work.

  $srv = Connect-VIServer 10.0.0.10 - administrator of the username-password password

  $Hostname = (get-wmiobject win32_computersystem). Name

  $script = "%windir%\system32\cmd.exe/c c:\dr\drIPsettings.bat".

  $HostUser = "root".

  $HostPassword = "password"

  $GuestUser = ' $Hostname\Administrator '.

  $GuestPassword = "password"

  $ScriptType = "bat".

  SE connect-VIServer 10.0.0.10 - Session $srv. SessionID

  Invoke-VMScript - ScriptText $script - VM $Hostname - HostUser $HostUser - HostPassword $HostPassword - GuestUser $GuestUser - GuestPassword $GuestPassword - ScriptType $ScriptType

  Thank you!

  How you code the - VM on the Invoke-VMScript cmdlet parameter, it seems that Displayname of the guest is the same as the host name.

  Can't you just use a loop on guests and then use the displayname property

  $script = "%windir%\system32\cmd.exe /c c:\dr\drIPsettings.bat"
  $HostUser = "root"
  $HostPassword = "password"
  $GuestPassword = "password"
  $ScriptType = "bat"
  
  Get-VM | %{
     $GuestUser = $_.Name + "\Administrator"
     Invoke-VMScript -ScriptText $script -VM $_ -HostUser $HostUser -HostPassword $HostPassword -GuestUser $GuestUser -GuestPassword $GuestPassword -ScriptType $ScriptType
  }
  

  You can encode the Get - VM with more specific selection criteria or use a Where-Object after the Get - VM.

  ____________

  Blog: LucD notes

  Twitter: lucd22

• Maybe stupid question from new user: that can be done to get the variables displayed in the information tab variables?

  I've been a user of LabVIEW (2011) for about 1.5 years now and just got ahold of TestStand 2014 to try future test as a structure for our needs.

  I am using on and off for about 3 days and there is something that has been driving me nuts.  When I launch a sequence, and that the report comes at the end, there are three tabs on it: report, steps and Variables.  Report and the steps are exactly what I expect to see.   However, the Variables tab is always empty.  Nothing that I found via my technique of checking everything in menus that looks vaguely related and right click things on many items and these menus for other vaguely related things as well.

  I tried looking for references to it, and all I get is the "Main" variable tab you see when you change the sequence, not the one that appears on the report.

  See arrow in the image below:

  

  I suspect there is something incredibly obvious that I'm missing, but it's driving me crazy here...

  You won't see that filled when a run is complete. The variables are useless at this time here.

  If you want to see this populous tab to suspend execution in the middle.  Or a breakpoint.  Then you can watch the variables at run time.

  Kind regards

• I lost the connection between the icons on the desktop and the program. When I click on an icon, I get the OPEN WITH menu.

  I click right-properties and I get C:\Windows\system32\rundll32.exe Application not found.

  I tried to download fixit and got the OPEN WITH menu.

  It sounds like your .lnk and/or your .exe file associations may have been lost.

  You can try to fix the ".exe" and ".lnk" file associations:
  'Windows XP file Association problems'
    <>http://www.dougknox.com/XP/file_assoc.htm >

  or you can try to do a system restore to a point in time before you had this problem:
  "How to restore Windows XP to a previous state"
    <>http://support.Microsoft.com/kb/306084 >
  If you have a .exe association problem, you may need to run the restore of the system from the command prompt:
  "How to start the System Restore tool by using the option of safe mode with the command prompt in Windows XP"
    <>http://support.Microsoft.com/kb/304449 >

  HTH,
  JW