How to get the details in an expression
Hi all
Just start with vsphere powerCLI again and I wanted to understand the basics of hash tables. I've been running this command as below:
Get - VM VM1. Get-View | Select-Object Name, @{N = "ToolsVersion"; {E = {"$_.config.tools.toolsVersion"}}
and I wanted to understand:
1. am I correct assuming that by this, we create a new Toolsversion property object?
2. How can I retrieve all the values that are available to me? Specifically, I want to ask from where comes this expression comes, E = $_.config.tools.toolsVersion and how to find all the expressions that are available to create new properties.
THX,
AJ
1. Yes, the Select-Object cmdlet will produce a new object on this object, you have a new property called ToolsVersion
You can see by channelling the results of the Get-Member cmdlet.
2. with the cmdlet Get-View, you get the vSphere .net object object.
These objects of vSphere are described in the VMware vSphere QAnywhere
In this particular case, you can check the VirtualMachine object.
Tags: VMware
Similar Questions
-
How to get the details of the item purchased in R12
Hello everyone, use Oracle Application R12.
I need the following information for all purchased object,
How to get the nom_element, $vendor_name, ordered_quantity, rec eived_quantity item_id,
returned_quantity.
Thank you.
Kind regards
Gurujothi.Hi Gurujothi,
PL.try following SQL. It will give you all the details of the purchase.
SELECT PO_NO, B.LINE_NUM, C.SHIPMENT_NUM, A.SEGMENT1
C.QUANTITY, C.QUANTITY_ACCEPTED, C.QUANTITY_BILLED, C.QUANTITY_CANCELLED, C.QUANTITY_RECEIVED, C.QUANTITY_REJECTED, D.QUANTITY QUANTITY_RETURNED,
B.ITEM_ID, E.DESCRIPTION, F.VENDOR_NAME
OF PO_HEADERS_ALL A, PO_LINES_ALL B, PO_LINE_LOCATIONS_ALL C, RCV_TRANSACTIONS D, MTL_SYSTEM_ITEMS_B E, PO_VENDORS F
WHERE A.ORG_ID = & OU_NAME
A.PO_HEADER_ID = & PO_HEADER_ID
AND B.PO_HEADER_ID = A.PO_HEADER_ID
AND C.PO_LINE_ID = B.PO_LINE_ID
AND D.PO_LINE_LOCATION_ID (+) = C.LINE_LOCATION_ID
AND D.TRANSACTION_TYPE (+) = "RETURN TO THE PROVIDER.
AND E.INVENTORY_ITEM_ID = B.ITEM_ID
AND E.ORGANIZATION_ID = C.SHIP_TO_ORGANIZATION_ID
AND F.VENDOR_ID = A.VENDOR_IDconcerning
Sanjay -
How to get the details of VM settings using cli power?
Hello
I went through the link http://communities.vmware.com/thread/325036?tstart=0 which has been very helpful. However I want to know is there anyway I can get the details of the VM?
I want Hardware, tab Option and details tab resources of the virtual machine that we see in the VM-> change the settings.
My main concern is to get the details of the memory of the virtual machine. There are several virtual machines in my infrastructure on which memory is limited to less amout then what is given to the virtual machine.
As for example in one of the virtual machine, we had problem where after troubleshooting, I discovered the memory assigned on Hardware tab is 16GB while the resource tab it is limited to 8 GB, which caused the driver lock memory to have other tools to use.
Concerning
Do you get the version number?
-
How to get the details of the activity of a process through the OMB more flow?
Hi all
I would like to know how to obtain details of the activity (bulk_size, operating_mode) of an activity by using more of the OMB.
OMB + > OMBRETRIEVE PROCESS_FLOW "MY_PROCESS" ACTIVITY "MY_MAPPING"...
Thank you!
SebastianHi Sebastian
For example, to retrieve a value from the mode of operation of the mapping activities
GET PROPERTIES 'OPERATING_MODE' OMBRETRIEVE PROCESS_FLOW 'PROCESS_DATA"ACTIVITY"LOAD_PRODUCTS"PARAMETER (VALUE)If the parameter is bound to a variable name of the property is REQUIRED.
You can retrieve the actual practice settings;
GET SETTINGS 'LOAD_PRODUCTS' OMBRETRIEVE PROCESS_FLOW 'PROCESS_DATA' ACTIVITYSee you soon
David -
How to extract the details of the application open
How to get the details of the application opened by programming?
-
My user folder displays the data of 30 GB. Actual data are only 2 GB. I want to wipe my drive C of hidden data. How can I get the details of 30 GB of data shown in the properties of the folder.
Hello
This free program allows you to see what is taking place.
http://www.Jam-software.com/treesize_free/
Here's how to understand Treesize Screenshots:
http://www.Jam-software.com/treesize_free/screenshots.shtml
____________________________________
Also check how much space system restore uses:
http://Windows.Microsoft.com/en-us/Windows7/how-much-disk-space-does-System-Restore-require
_____________________________________
You can clean your hard drive using these two methods.
"Delete files using Disk Cleanup"
Using the free CCleaner program:
http://www.Piriform.com/CCleaner
In NO case use the registry cleaning Option in CCleaner
_____________________________________
Download, install, update and scan your system with the free version of Malwarebytes AntiMalware:
http://www.Malwarebytes.org/products/malwarebytes_free
And Norton Backup, if you are using Norton, can do strange things with filling of hard drive space.
See you soon.
-
How can we get the details of the traffic for the spaces for example, users access report by space (for all users), DB tables can be used to get information, such as for example: users who have logged in - never
You can use analytics. WebCenter Analytics comes with a number of events out-of-the-box for which it brings together measures which are very useful.
You can check in the WebCenter Analytics database schema. WebCenter Analytics Dashboards are present in the scheme of ACTIVITIES and are modeled in the form of a star schema.
The schema includes 2 types of tables. FACTS analytical tables are used to store instances of specific events. For each event, a specific FACT table is present, for example for page views, the views of space, connections and so on. These tables contain a timestamp for the moment, that the event is occurred and integer ID these descriptive reference data stored in DIMENSION tables.
DIMENSION tables contain descriptive information about the entities associated with events. Size examples are pages, applications, groupspaces, users and so on.
See the details of the table all the under http://docs.oracle.com/cd/E23943_01/webcenter.1111/e10148/jpsdg_app_aschema.htm#JPSDG10767
If you want to custom event.that track, as you can get. see this blog entry
Quobell technology - portal WebCenter: WebCenter Analytics: define and save custom events
-
Original title: calendar
How can I get the details on my agenda which is on my iPhone and iPad in the calendar on the windows start page?
It depends on where your calendar is really stored. He usually stored in your e-mail account and connected to it. That's how Google Calendar, Gmail or Microsoft Calendar + Outlook.com (formerly Hotmail) function as business/school Exchange email accounts work.
So long story short, as long as your phone and your calendar app are both set to synchronize with the same server (so the same email account), then they will show the same calendar as events.
If your calendar is not stored in a service that can interface with your phone and the calendar app, you will need to choose a new calendar service. For example if you use only iCloud, you should know that Apple does not your calendar to display the application calendar. Google blocks of even Windows users have the full calendar function.
So if you need it, my choice is Outlook.com (or an Exchange of Business/School/University account). If you go with Outlook.com, you can use it to store your calendar and keep your iPhone calendar in perfect sync and there is no need to change your email address or anything deep like that. In fact, you can connect to Outlook using the same account that you used to ask this question.
-
How to get the diagram ER or master child tables details
Hi team,
I would like to get the details of the child Master Table Details (ER Diagram). I use the PLSQL developer.
Could you please suggest how to get this tool or by using the query.
Thank you
Vincent
Hi mohamed,.
Please use TOAD. You ask to go to the link below: -.
Thank you
Jihane Narain Sylca
-
One for the era: how to get this output using REGULAR EXPRESSIONS?
How to get the bottom of output using REGULAR EXPRESSIONS?
Published by: user12240205 on June 18, 2012 03:19SQL> ed Wrote file afiedt.buf 1* CREATE TABLE cus___addresses (full_address VARCHAR2(200 BYTE)) SQL> / Table created. SQL> PROMPT Address Format is: House #/Housename, street, City, Zip Code, COUNTRY House #/Housename, street, City, Zip Code, COUNTRY SQL> INSERT INTO cus___addresses VALUES('1, 3rd street, Lansing, MI 49001, USA'); 1 row created. SQL> INSERT INTO cus___addresses VALUES('3B, fifth street, Clinton, OK 74103, USA'); 1 row created. SQL> INSERT INTO cus___addresses VALUES('Rose Villa, Stanton Grove, Murray, TN 37183, USA'); 1 row created. SQL> SELECT * FROM cus___addresses; FULL_ADDRESS ---------------------------------------------------------------------------------------------------- 1, 3rd street, Lansing, MI 49001, USA 3B, fifth street, Clinton, OK 74103, USA Rose Villa, Stanton Grove, Murray, TN 37183, USA SQL> The REG EXP query shouLd output the ZIP codes: i.e. 49001, 74103, 37183 in 3 rows.
/* Formatted on 2012/06/18 17:25 (Formatter Plus v4.8.8) */ SELECT REGEXP_SUBSTR ((REGEXP_SUBSTR (full_address, '[^,]+', 1, 4)), '[[:digit:]]+') RESULT FROM cus___addresses
-
Chart WPF: How to get the limits of PlotArea and axes
I can't find explicit methods to get limits of PlotArea and axes.
Please let me know workarounds if they are available. Actually a post explains how to get the PlotArea limits using RangeCursor. Are there alternative means for shafts?
The photo below shows what I did in WinForms with the methods GetBounds and HitTest. I would like to draw the ornaments on the chart in WPF.
I have attached a code example of this look ornaments around the plot area and the scales.
Note that this relies on implementation details of the current version of WPF controls for the ornaments of the scale, as it was more effective than gradually points to test in the graph using the
GetScaleAt
method. We have intentionally left much of the underlying primitive types with a minimum documentation, like us they have changed in the past and may change in the future. Although these exact members can be removed in a future release, we do not expect to provide an equivalent function and stabilize the primitive API over time. -
How to get the items on a loop at the same time during the execution of the loop for
Hello
I am a student. I would like to know how to get the outside loop counter values For in parallel so that the loop runs rather than obtaining the value finally outside the loop for future prospects for the answers.
Thank you
Frederick
You already said yes, and you have said some of the different ways (registrants, locals, reference, queue, etc.). Since the information was provided to your request, the thread can be considered closed? If you want details about how to implement something, you must provide the details on what you are doing.
-
How to get the Subvi (the virtual path is in .exe) reference in Run Time System
Hello world
The problem is how to get the reference of the Sub - VI in run time system, when the Subvi is in .exe after construction.
More details:
Top of page vi called the Subvi dynamically, so that the Subvi is always included, and the source object is the application.exe.
After the above configuration, the Sub - VI will be the application.exe. For example, the path of Subvi est...\application.exe\SubVI.vi
So, how to get the reference of the Subvi in Run Time System?
I can't do it when you use 'open reference VI' with le...\application.exe\SubVI.vi path in the run time system.
In fact, I can create a file to include the Subvi, rather than build the Subvi in application.exe, then I can get the convenintly reference. But this isn't my favourate average.
Thank you
chenyin
That is the problem. Call a Subvi dynamic means users could change, but it is also very attractive.
The dynamic call should be used in a user control, but some parade can avoid problems.
It depends on why you use dynamic calls...-online 2 main ways:
-Dynamic call are used to maintain a scalable framework for the code without acting on the executable file-online a single VI distribution managed by the administrator/developer
-Dynamic call are used to provide a collection of "external" characteristic that could be enriched by the administrator/developer. For example, you provide your customers a set of selectable custom signal filters in the executable.
In 2 cases, you are only able to assess the skills of the users to know if there is a risk of damage, if there is a change.
So to stay only master a parade might be to provide dynamic VI without a schema, but with the problem of maintenance, since no in-place editing and more attention to manage distribution.
Another way is to hide the actual distribution to user-online call dynamic VI but it without name as *.vi but others (a repellent name as system of OS name ) or simply without extension in order to attract not user... but that's debatable...
Another more difficult but more secure method is to create a consistency check before your routine (version, user, modified date,...)
-
How to get the options standby or hibernation in safe MODE? [Windows 7]
I searched and sought, could not find anything either, but my thick head still think there may be an answer somewhere.
He said that I couldn't not Audio on safe MODE, got it working very well after following a tutorial. I think that the same thing can be done with the SLEEP or hibernation, I could be wrong.
Now, I still want to know how to get the SLEEP or HIBERNATE in safe MODE,
I don't care if my attempts to spoil anything on this shit pathetic excuse of HP Compaq for a laptop. I don't want any other help other then getting options 1 or both. This laptop has built in fan (had 3 other fans do), so why I run safe MODE or it would melt faster.-Windows 7 Home Prem 64-bit.
TLDR; Anyway to get the sleep or Hibernate in safe MODE?
Hello, Spencer,.
Thanks for posting your question on the Microsoft community.
Thank you for your query details.
Safe mode starts Windows with a limited set of files and drivers. Startup programs do not work in safe mode, and only the basic drivers needed to start Windows are installed.
Please refer to the suggestions of Shawn "Cmdr" Keene [MVP] replied on May 28, 2014 and check.
http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-desktop/sleep-in-safe-mode/d91b5ec4-8c45-4D6E-A899-eaba36209de0?DB=5Additional information:
Sleep and extended: frequently asked questions
http://Windows.Microsoft.com/en-us/Windows7/sleep-and-hibernation-frequently-asked-questionsI hope this information helps.
Please let us know if you need more help.
Thank you
-
How to get the number and the name of the contacts selector
Hi all
I got the Contact Picker work but I have no idea how to get the selected telephone number and the name.
There are attributes that I can put like contactId.value () to retrieve or there is another way?
Thanks in advance.
ImageButton{ defaultImageSource: "asset:///images/bluebutton.png" onClicked: { contactPicker.open(); } attachedObjects: [ ContactPicker { id: contactPicker onContactSelected: { result.text = "You chose contact: " + contactId; } } ] } Label { id: result text: "You chose contact: " }
Hello
You can get the contact name and phone number as this,
ImageButton{ defaultImageSource: "asset:///images/bluebutton.png" onClicked: { contactPicker.open(); } attachedObjects: [ ContactPicker { id: contactPicker onContactSelected: { result.text = "You chose contact: " + contactId; // call a cpp method to get the details
app.getDetails(contactId); } } ] } Label { id: result text: "You chose contact: " }
the CPP code:
void ContactDetails(ContactId id) { Contact contact_info = m_contactService->contactDetails(id); QString firstName = contact_info.firstName(); QString lastname = contact_info.lastName(); QList
phoneno_list = contact_info.phoneNumbers(); QStringList no_s; foreach(ContactAttribute attr, phoneno_list) { no_s << attr.value(); } } You can get details like this.
Kind regards
Naresh Kodumuri.
Maybe you are looking for
-
C50 - D satellite - external hard drive is not recognized
Just Satellite C50 D but are unable to read or recognize my LaCie hard drive.As it has all the data from my old computer, it is rather important. Can someone provide help and advice on the way to a) the disc or b) transfer all data in the memory of t
-
Portege R830: display resolution set by default with Port Replicator
Hello I have a speed HI PA3916A-1PRP port replicator for my R830.Whenever I start the laptop in the port replicator, the display settings for the screen of the laptop and external monitor goes back to some default that I didn't have before. Rang of T
-
R8000 FW 1.0.3.4 Extra channel 165
Did you notice the channel additional 5 '165' g if yes do not use. He abandons the connection of 877,6 to 173,4
-
Limits of vs in CSR or DIFF mode
Hello I have the following question. Some cards like 6009 Multifunction DAQ support several beaches for the configuration of the analog inputs differential as ±20V, ±10V, ±4V, ±2.5V, ±2V, ±1.25V, ±1V, while the CSR mode is supported only ±10V. Howeve
-
Store music on the network drive?
I am considering a Director to play my music (mp3) stored on a shared network (NT) drive library. The Director can access music stored on the network drive and not on a PC? I don't want to have the PC on when I listen to music. The media to be instal