get transactionEvent lines

Similar Questions

• using Notepad, when I open My Notepad program to look at a text doc, all I get is lines of code. How to change settings?

  using Notepad, when I open My Notepad program to look at a text doc, all I get is lines of code. How to change settings?

  Hi Josephhenry,
  the notebook is only for the most basic of .txt files. All the more complicated files will be displayed incorrectly, you will see only the forms. Try to open it in wordpad.
  Hope this helps
  Eddie

• When I try to print from Outlook Express I get a line: 2253, Char: 1 error: unspecified, Code: 0 URL: res://ieframe.dll/preview.js.

  When I try to print from Outlook Express I get a line: 2253, Char: 1 error: unspecified, Code: 0 URL: res://ieframe.dll/preview.js.

  Go to start | Run and type (or copy / paste):
   
  regsvr32 ole32.dll
   
  Press ENTER.

• HP office jet 6500 model e709a - when I make a copy I get black lines the length of the copy.

  HP office jet 6500 model e709a - when I make a copy I get black lines the length of the copy.

  Make sure that the printer is plugged into a wall outlet directly and not in a surge protector. This, often, is the reason for lines appearing in the analyses.

  There is also a document containing information on how to address lines in scans/copies located here.

  I hope this helps.

• BlackBerry Smartphones SMS text - how to get a line break?

  Because unfortunately, the Enter key is programmed to send text, how can I get a line break in the drafting of a text message?

  Green-field wrote:

  Because unfortunately, the Enter key is programmed to send text, how can I get a line break in the drafting of a text message?

  SHIFT-ENTER key

• Get the lines containing only numbers and English characters

  ΗΙ,

  Assume that there are the following lines:

  Select 'RE89203' Union double all the

  Select 'cd89203' Union double all the

  Select 'cD89203' Union double all the

  Select 'CZC4255463' Union double all the

  Select '597CD83843KL' Union double all the

  Select CD 90832 83843FE 597' a Union double all the

  Select 597 CD 90832 ~ 83843FE' a Union double all the

  Select 'CD9083283843FΔ' Union double all the

  Select 'CD9083283843FΑ' of the double

  In the list above, I want to get the lines containing at least a figure and English at least one character (in capital), but with the exception of these, any other character is not acceptable (and the line as well).

  I tried the following, but the result set is not the direction you want:

  with sample_data as

  (

  Select 'RE89203' Union double all the

  Select 'cd89203' Union double all the

  Select 'cD89203' Union double all the

  Select 'CZC4255463' Union double all the

  Select '597CD83843KL' Union double all the

  Select CD 90832 83843FE 597' a Union double all the

  Select 597 CD 90832 ~ 83843FE' a Union double all the

  Select 'CD9083283843FΔ' Union double all the

  Select 'CD9083283843FΑ' of the double

  )

  Select one

  of sample_data

  where regexp_like (, ' [A - Z] [[: digit:]] ',' it)

  Explanations:

  The value "cD89203" is not acceptable because it contains the character 'c' (in lowercase).

  597 90832 83843FE record value CD' is not acceptable because there is a space.

  597 90832 record value CD ~ 83843FE' is not acceptable because there is a character "~".

  The value "CD9083283843FΔ" is not acceptable because there is a non-English (character 'Δ') character.

  The value of the last record "CD9083283843FΑ" is not acceptable because there is a non-English (character 'Α') character.

  Note:

  I'm using OraDB 11 g v2

  with sample_data as
  (
  select 'RE89203' a from dual union all
  select 'cd89203' a from dual union all
  select 'cD89203' a from dual union all
  select 'CZC4255463' a from dual union all
  select '597CD83843KL' a from dual union all
  select '597CD90832 83843FE' a from dual union all
  select '597CD90832~83843FE' a from dual union all
  select 'CD9083283843F?' a from dual union all
  select 'CD9083283843F?' a from dual union all
  select 'ABCDEF' a from dual union all
  select '1234' a from dual
  )
  select a
  from sample_data
  where replace(translate(translate(a, '~', '#'), 'ABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789', '~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~'), '~', null) is null
  and regexp_like(a, '[A-Z]')
  and regexp_like(a, '[0-9]')
  /
  

  Edit: See post of Chris Hunt for a more efficient version of the line 17.

• Wehre can I get Adobe line for my iPad?

  Wehre can I get Adobe line for my iPad?

  Thank you.

  There is no Adobe online application, perhaps looking Draw Adobe (Illustrator) or Adobe (Photoshop) sketch? Both can be found in the Apple store (apps).

• How do you get multiple lines on a plate of identity?

  How do you get multiple lines on a plate of identity? I use Lightroom 5 on a windows machine.

  I suggest that you take a look at this video tutorial of Julianne Kost. She goes on how to create the dog tags of images:

• How can I get the lines for the date between 2 different days

  Hi all,
  
  How can I get the lines for the date between 2 different days.
  
  Sample data:
  Table name: Articles
  Title start_date end_date
  Heading1 08-22-2011 2011-09-11
  2011-08-01-2011-09-01 Title2
  Title 3 2011-08-21 08-21-2011
  title4 2011-08-28 2011-09-11
  
  Result will be:
  Title start_date end_date
  Heading1 08-22-2011 2011-09-11
  2011-08-01-2011-09-01 Title2
  title4 2011-08-28 2011-09-11
  
  This is my example query:
  SELECT * FROM items WHERE trunc (es.date_start) > = TO_DATE('2011-08-22', 'YYYY-MM-DD') AND trunc (es.date_end) < = TO_DATE ('2011-08-28', 'YYYY-MM-DD')
  
  but I can not get the expected results. Any help would be much appreciated.
  
  Thanks in advance

  not read your question properly before...

  Please try this

  Select * FROM items
  WHERE (TO_DATE ('2011-08-22', 'YYYY-MM-DD') between TRUNC (es.date_start))
  AND TRUNC (es.date_end)) OR
  (TO_DATE ('2011-08-28', 'YYYY-MM-DD') between TRUNC (es.date_start))
  AND TRUNC (es.date_end))

• Always get horizontal lines on video during export to 720 x 480 AVI with "Deinterlace" turned on

  Professional Hello again fine,

  I use 6 first on a Windows 7 computer.

  I always get horizontal lines in my video during export to AVI 720 x 480, even with "Deinterlace" lit.

  I had a doubt on another thread and said robodog2 that it is interlaced with the lines of the file are not displayed when you use a selection of progressive export file...

  http://forums.Adobe.com/thread/852077

  So I found the box "Deinterlace" via "chronology of export > movie > settings > special treatment > Modify > deinterlace ', but if I have this box checked, I still have horizontal lines.

  Here are the screenshots of the same base video before importing them in at first for an effect reverse, and after I saved the resulting file 720 x 480 AVI... the final file appears with the same horizontal lines if yes or no deinterlacing is checked.

  Lines are more visible when viewing the video in Windows Media Player they appear in these screenshots below... the lines have in fact characteristics of edge in the public eye.  The lines look like an old used TV sometimes when the antenna was not getting good reception.  Also, I am saving successfully the "chronology of export > movie" path with different codecs (this is no longer a file generated from the preview, I was talking about in the previous thread on this)... so I'm sure all the parameters with this version and I get this result with three different codecs, with and without the "Deinterlace" checked... I had the same experience over and over yesterday evening while he was also working with another file.

  No one knows what is the cause?... Please see the pictures below

  Thank you

  digiday

  AVI file of front of record in first -own original 720 x 480, 30 frames per second

  

  After the backup in the first 6

  Horizontal lines showing in this first 6, 720 x 480, 30 fps AVI file

  

  Hi David,

  Yes, I finally solve this problem, based on a chance observation on another forum.  On another forum a guy once mentioned the setting ' NONE FRAME ' in the 'Record Options' in the dialog "Export movie" when I export my movie to an AVI file, as seen in my screen shot below.  Otherwise, I think that setting was failing to "FIRST FRAME ABOVE".

  For the most part, I was getting these terrible horizontal lines when I exported the graphic effects that I created with imported Photoshop layers in my film projects... in these kinds of exports that horizontal lines were much worse and more obvious that if I was just export a project with the actual video that I had imported in my project.

  But still, even with the imported video, as examples of images that I posted on this thread, even in this case I saw the horizontal lines.

  So one guy on another forum said something about "ANY FRAME" setting in my export dialog box.  It relates to something else about deinterlacing it is better for this problem as the "FIRST FRAME SUPERIOR" or "FIRST FRAME BELOW" settings.

  As can be seen in my screenshot below, which is the setting I talk, but I was using the old 6 first of 1999all about, and options in the new versions of first export dialog are different.  The guy on the other forum that mentions that setting, that eventually solved my problem, said that the adjustment did not differ in a newer version of first he used, but I found this setting in my dialog "Export movie" , and that solved the problem.

  It was so simple and I went by so many things to try to solve it, including my files running through other apps to try to pre empt the problem and none of it worked... He just turns out to be THAT simple adjustment "ANY FIELD" and that solved the whole problem.

  First 6 and some newer versions of first, seem to have other problems, such as the creation of an oblong shape, rotation image from a round graph-shaped eggs after importation and applying an effect of rotation, but otherwise, once I realized that the solution of horizontal lines, I did pretty well understand many things in this former first and I got pretty good results.

  Viel Glück!

  

• Get fine lines on the 2 sides of each image when I paste and combine

  Hello. I'm turning an image 45 degrees using the custom rotation and then cut the picture in half with the crop tool. I duplicate the image, horizontally back and recombining the two images. The problem is that I get these lines thin and pale, appear, which are particularly visible when I enlarge the image. I copy / paste before and not had these lines appear. I'm going nuts trying to figure out what is happening. I use 3 elements. There must be a way to recombine these images without these lines appearing. I think it is in this context, showing through. The lines are perhaps a few pixels wide. Not wide at all.

  You can select the tool move and using the arrow keys, move one of the layers

  during a few pixels and then do the Shift + Ctrl + Alt + E to merge.

  You may have to merge layers a couple of times to get rid of the seams.

  Before repositioning and fusion

  

  After repositioning and the merger of two times

  

  

  MTSTUNER

• How can I gett margins lines more near the edge of the page.

  my work always starts too far in the page, and I want to spend more than near the left side if can get all the words on a single line

  ex: want this: totrtotyoyoytotyotooooptootp

  instead: tiourtrtyottotytyptypyty
  totititi

  In what program? If Word, please in forum word here.
   
  Microsoft Office Outlook Forum
  http://answers.Microsoft.com/en-us/Office/Forum/Outlook?tab=all 

• Password: can not get in line and my laptop will not accept my password

  yesterday morning I went online with no problems, but when I tried later in the day that my phone does not accept that my password so could not get online - tried again this morning without modification.

  Thank you Mick for your repl to my problem, the problem is I can't on line at all. I use now the phone my wife to try to get help.

  Eddie

  It has nothing to do with getting online with your computer.

  Use portable your wife to read, what you arereading here.

  Everything I told you to do it was to read what was at this link to try a ssolve your problem:

  If you can't do it, comsider reinstall Vista.

  If you are unable to connect to Windows 7 or Windows Vista, you can use the Windows Vista System Restore feature, or the Windows 7 system restore feature.

  You may be unable to connect to Windows Vista or Windows 7 in the following scenarios:

  • Scenario 1: You recently set a new password for the protected administrator account. However, you don't remember the password.
  • Scenario 2: You type the correct password. However, Windows Vista or Windows 7 does not accept the password because the system is damaged.
  • Scenario 3: You delete a protected administrator account. Now, you cannot connect to another administrator account.
  • Scenario 4: You change an administrator account protected with a standard user account. Now, you cannot connect to another administrator account.

  To use system restore to log on Windows 7 or Windows Vista when you lose access to an account, follow these steps.

  Note To do this, there must be a restore point from the system in which the connection was successful.

  1. Insert the Windows Vista or Windows 7 DVD, and restart the computer.
  2. When you receive the following message appears, press a key:
     Press any key to start from the CD or DVD.
  3. Set the following preferences and then click Next:
     • To install language
     • Time and currency formats
     • Keyboard or input method
  4. Click repair your computerand select the operating system you want to repair, and then clickNext.
  5. Click System Restore, and then click Next.
  6. Click on the food that you want to use, and then click Next.

     Note Click a restore point that will return the computer to a State where the connection is successful. After you use the system restore feature, reinstall all programs or updates that can be removed. You won't lose any personal documents. However, you may have to reinstall programs. You may also need to reset some personal settings.

  7. Confirm the disks that you want to restore, and then click Next.
  8. Click Finish, and then click Yes when you are prompted.
  9. When the system restore process is complete, click restart to restart the computer.
  10. Once the computer restarts, click close to confirm that the system restore process has finished successfully.
  11. Use an appropriate method to open a session. For example, log in using an older password, or log in using another computer account.

  After you connect, you must follow additional steps, depending on the scenario you encounter.

  Back to top

  Additional steps for scenario 1

  1. After you log on, change the password for the protected administrator account.
  2. After you change the password, restart the computer. Make sure that you can connect by using the new password.
  Back to top

  Additional steps for scenario 2

  1. After you log on, make sure that each user account can log in using the appropriate credentials.
  2. Change the password for the user account that cannot log on.
  Back to top

  Additional steps for scenario 3

  1. After you log on, use the element user accounts in Control Panel to create a new protected administrator account.
  2. Log in using the new protected administrator account. Then delete the older protected administrator account which has been restored.

     Note For security reasons, do not use the restored protected administrator account.

  Back to top

  Additional steps for scenario 4

  1. After you log on, use the element user accounts in Control Panel to create a new protected administrator account.
  2. Log in using the new protected administrator account.
  3. Change the old administrator account protected with a standard user account.

  Mick Murphy - Microsoft partner

• Why my laptop starts then sudenly get all lines going donw the monitors

  Hi why my cell phone begins to sundenly get all the lines going to the bottom of the screen when I click on the programs I have on it suddenly stops then I'll safe mode with network will it please help if you can, thanks

  Hello

  It could either be corrupted drivers graphics card that is causing the problem or the graphic itself is a failure.

  Go to your site mobile phone Manufacturer'e and download up-to-date graphics / graphics card / Chipset drivers for your model laptop and the operating system.

  As it is a laptop and if the updated graphics card drivers do not set it, consult the manufacturer of the laptop or a repair shop, local.

  See you soon.

• Printer HP 5150 get black lines, printing from the internet.

  Original title: my hp5150 printer does not print with my computor windows vista.  It just makes black lines. We get the Windows forum for an answer

  My 5150 hp printer does not print outside the internet.  It just makes black lines.

  Hi Lori Hall,

  1 are you facing this problem when you try to print from Internet Explorer?

  2. If Yes, what version of IE are you using?

  3 does occur with other applications too?

  4. don't happen with a particular Web page or the whole?

  5. you will remember to make changes to the computer before this problem?

  6. are you able to display a print preview mode for the same before you start to print?

  You can check if the page print settings are correct and encoding is set to Unicode UTF.

  To check the print settings

  a. open Internet Explorer, click file in the menu and click on layout. Check if all options are properly set.

  To check for coding,

  a. open Internet Explorer, click view on the menu, and select Encoding. Check the option for Unicode UTF.

  You can also check out the following link and check:

  Printing webpages: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/printing-webpages-frequently-asked-questions

  Hope this information is useful.