Get WVC80N to work with my crazy network configuration

Similar Questions

• How can I get FF to work with organizing Mod (for the mods used with ARE: Skyrim)? I get an error message that it cannot understand the given address.

  I am a big fan of the Elder Scrolls and uses the new 2.2.9 STEP Setup. They went to the organizer of the Mod (MO) and I can't seem to get my FF working with the mod download things part. I click on the icon "Earth", that takes me immediately to the page file Nexus Mod, but when I choose a file to download after clicking on "Download Manager" I get this error message:
  The address was not included
  Firefox doesn't know how to open this address, because one of the following protocols (nxm) is not associated with any program or is not allowed in this context.
  You may need to install additional software to open this address.

  The address when clicking "Download Manager" begins with nxm://Skyrim/mods/ the address is such because trying to download with the Manager.

  Any help will be greatly appreciated! I pulled out my hair for the last few hours trying to find a solution. I disabled Adblock, other popups blockers and activated the main address in my exception rules. It simply doesn't get it. Ugh!

  Thank you in advance!

  In order to use nxm: / / links, Nexus Mod Manager must be installed and associated with the Protocol nxm .

  • http://www.nexusmods.com/Skyrim/mods/modmanager/

  Problems with this program to third parties, please see the support forum:

  • http://forums.nexusmods.com/index.php?/forum/1413-NMM-code-development-chat

• How can I get headphones to work with phone I6

  How can I get headphones to work with phone I6

  Too bad.  I had to remove the cover of the phone to get a connection with the headset.

• Get EqualLogic to work with Ovirt

  If anyone has any questions get Ovirt to work with EqualLogic the following link may be useful:

  https://sites.Google.com/a/Keele.AC.UK/partlycloudy/ovirt/gettingovirttoworkwithdellequallogic

  Ovirt is a very good free alternative to many commercial vm management solutions.

  One thing to change is the path_checker in/etc/multipath.conf.   There is a bug in Multipathd, manifested with the EQL firmware 7.0, since it's 4K sector.  When you use readsector0, it causes a protocol error just after the connection.  Change readsector0 "tur" or "arm."

  It's what I generally use for EQL in /etc/multipath.conf

  the default is {}

  udev_dir/dev

  polling_interval 10

  path_selector ' round-robin 0 ".

  path_grouping_policy multibus

  getuid_callout "/ lib/udev/scsi_id - list blanche--device=/dev/%n.

  path_checker tur

  rr_min_io 10

  setting 8192

  rr_weight priorities

  immediate restore

  no_path_retry fail

  user_friendly_names Yes

  }

  Also make sure the interface file at the same time iSCSI_ifacename and net_ifacename

  Cat/var/lib/iscsi/ifaces/eth0

  # BEGIN 6.2.0 - 873.2.el6 RECORD

  iface.iscsi_ifacename = eth0

  iface.net_ifacename = eth0

  iface.transport_name = tcp

  iface.vlan_id = 0

  iface.vlan_priority = 0

  iface.iface_num = 0

  iface. MTU = 0

  iface.port = 0

  # FILE END

  A couple of current settings of /etc/iscsid/iscsid.conf

  ################################

  session and device queue depth #.

  ################################

  # To control how many orders the session queue together

  # node.session.cmds_max to an integer between 2 and 2048 is also

  # a power of 2. The default value is 128.

  node.session.cmds_max = 1024

  # To the queue of the device to set depth node.session.queue_depth control

  # to a value between 1 and 1024. The default value is 32.

  node.session.queue_depth = 128

  node.session.iscsi.FastAbort = No

  Kind regards

• Satellite A210-19Z: could not get internet to work with Windows XP installed

  Hello

  When I install Windows XP on my Satellite I can not get Internet to work

  Do I have to install drivers or so?
  Please post links to the drivers if so.

  Christian

  Of course you need readers.

  If you have connected your router with a LAN cable, then you will need to install the LAN driver. If you want to use the network WiFi WLan driver must be installed also.
  If your computer laptop doesn t supports the WLan card then the WLan driver is not required

  All the drivers (if available) XP can be downloaded from the European driver Toshiba page!

• BlackBerry Z10 is unable to get ActiveSync to work with Exchange 2010

  Hello!

  We cannot get the Z10 do ActiveSync with our Exchange 2010 server. We are well aware that ActiveSync works with our Exchange Server, because we have an iPhone that synchronizes correctly, and because online Microsoft Exchange test tool confirms that our test account can be accessed.

  Also, I used the network monitoring software to watch current network traffic, and I see TLS packets exchanged - but with the Z10, that's where it stops: when connecting the MS test tool ', the TLS configuration is followed by HTTP traffic, which is not the case when the Z10 tries to connect - traffic stops after this point.

  Brings me to believe that the Z10 refusing our server certificate, which would make sense, because this certificate is simply a self-signed (it would be really well if if the Z10 actually * says * me that this is indeed the reason).

  Operating from this assumption, I tried to install our certificate self-signed on the Z10 device, but without success.  I've exported our certificate to a .pfx file and moved to the "Certs" folder on the device, then proceed to the section "Import certificates" of security settings (translate these names of the French user interface). I tried both the 'personal certification authority' and 'Client' classes, personal but even if the Z10 makes me type (required) certificate password, the import fails with the Red 'X' icon and the message '0 certificates imported out of 1 ".

  This problem us cost hours of our time at this stage, would be a pointer in the right direction * very * appreciated.

  Thank you

  Mr. Jean-Pierre Gygax

  If you want to import something on your Z10, it is not the certificate that you want to import, but rather the certificate that authenticates your certificate.

  That being said, why don't buy you a cheap certificate issued by a CA recognized by the Z10?

• I can't get any printer work with Windows XP too more.

  I can't get any printer to work with my computer which uses Windows XP.  I checked with the companies of the printer and it is not a driver problem.  In addition, these printers all work on other computers that use Windows XP.  In addition, they worked on my computer for years until a few weeks ago.  I have been informed by the technicians of the printer who checked my computer to verify that it was not a 'driver problem' that there is a problem of Microsoft XP. It seems that the part of XP that runs the divers feel is corrupt.  The print job will go to the print spooler, but it is never sent too the printer.  Anyone has the clues how too fix this?  Y at - it an XP patch that might do the trick?  Also, I tried a "System Restore" in several places and it was not fixed.

  Choose a printer and work to get this working.

  In the windows printers and faxes, you see a printer that is in line with a status if "ready" and are able to print a test page (right click, properties, print the Test Page). "

  If there is a jam in print job in the queue of XP, nothing will be printed until the jam is cleared.

  To clear the print queue, stop the print spooler service and delete all the jobs/print pending.
     
  You cannot delete all print jobs in the queue so that the Print Spooler Service is running.
        
  To stop the Print Spooler Service, click Start, run and enter in the box:
         
  services.msc
         
  Click OK to open the Services Applet.
         
  Locate the Print Spooler Service, right click and choose 'Properties' and then click on the "Stop" button to stop the Print Spooler Service is running.
     
  The option "Startup Type" of Service properties print spooler is usually set to "Automatic" (which is now a good time to check it out).
     
  If the "Startup type" is not set to "Automatic", set the "Startup type" to "Automatic" If that is your desire (which now is the time to check it out).

  Do not try to start or restart the Print Spooler Service immediately.  You must remove all print jobs backed up first...
     
  Then, delete all updates pending upward and forward to printing from XP.  If they do not print before, you will need to send the to the printer again.
     
  Using Windows Explorer, navigate to the following folder (assuming that Windows is installed on your C drive):
     
  C:\WINDOWS\system32\spool\PRINTERS
         
  Delete all the print jobs in queue (select and delete all the files) in the folder if the folder is without waiting for print jobs.  The folder must be empty when you are finished.
         
  Reboot your system and check the Print Spooler Service again to make sure the Print Spooler Service restarts automatically restart (given that the startup type is set to automatic).
     
  After the reboot, check again the Spooler Service for printing and the 'Status' column for the print spooler must be read "started."

  See if you can now print a Test Page.

  Submit new failure of print jobs.

• brother MCF685 printer stop working with the home network. I did something wrong

  Have a brother MCF685CW up until a month ago was working fine on my network. All computers on my home network have been able to print on the printer.  I don't know if I was doing something by mistake or something is wrong, but it will not print from any computer on my network.  I need help

  Hi HSWV,

  · You receive an error message or error code when you try to print?

  · The computer is connected to the network with windows XP installed?

  See the links below: resources for the resolution of the printer in Windows XP problems: http://support.microsoft.com/kb/308028

  Error message appears after printing to a network printer: http://support.microsoft.com/kb/282833

• Get Slicknav to work with Lightbox2

  Hello, I can't get these two working together at the same time.

  I saw somethings online on jQuery.noConflict () < script >; < /script > although I have no idea how to implement it for my situation.

  Any help would be appreciated

  Here is the code for my Index.html

  <! doctype html >

  < html >

  < head >

  < meta charset = "utf-8" >

  < title > < /title > Gallery

  < name meta = "viewport" content = "width = device-width;" initial-scale = 1.0 ">

  < link rel = "stylesheet" href = "css/reset.css" >

  < link rel = "stylesheet" href = "css/styles.css" >

  < link rel = "stylesheet" href = "css/gallery_styles.css" >

  < link rel = "stylesheet" href = "lightbox/lightbox.css" >

  < link rel = "stylesheet" href = "css/responsive_styles.css" >

  < link rel = "stylesheet" href = "css/slicknav.css" >

  < script type = "text/javascript" src = "css3 - mediaqueries.js" > < / script >

  < script src = "jquery - 1.11.3.min.js" > < / script >

  < script src = "jquery.slicknav.js" > < / script >

  < script type = "text/javascript" >

  $(document) .ready (function () {}

  $('#menu').slicknav ();

  });

  < /script >

  < / head >

  < body >

  < div id = 'wrapper' >

  < / div > <! - wrapper - >

  < script type = "text/javascript" src = "jQuery/jQuery-more - jquery.js" > < / script >

  < / body >

  < / html >

  If the above file combines jquery lightbox, then you have a problem with the jQuery library you have loaded in the top of your document as in

• Impossible to get Safari to work with BT Internet email

  I can not Safari to work with BT Internet email. Whenever I try to connect to my email account it comes with just a blank page.

  It works very well with Firefox, but I would prefer to use Safari.

  I disabled all extensions Safari and made sure the cache has been clear. I spent ages on the phone to BT this morning, but the question certainly seems to be with Safari.

  Am I alone with this problem?

  Just answered my own question. BT obviously don't like users using private browsing. It was the only thing I never thought

• How can I get Thunderbird to work with Apple iCloud?

  I tried everything and I can't work with Thunderbird in iCloud.

  The problem was with iCloud two-step verification process. Basically, if you want to use Thunderbird and iCloud together you need to generate a specific app password when you connect to the Web site Apple ID. Here is a link that has instructions. I hope this will save someone out there the aggravation that I lived before I find this :)

  http://www.applevis.com/Forum/General-Chat/note-icloud-mail-third-party-clients-and-two-step-verification

• How can I get Thunderbird to work with 2-step Google verification?

  I tried for a while to use passwords with Thunderbird specific app, however it seems to work temporarily and then request a new password. It becomes frustrating. All the more that I love using Thunderbird on my PC... but I can't deal with these errors. I want the extra security on Google. So either it works with 2-step audit, either I don't use at all. Help, please!

  The attitude is necessary? # Redacted choice poor language # is not a matter of google, since I use my password app successfully with MANY other applications. He is the only person giving me a question. But no matter, I found an alternative customer. If it's the wonderful help that I would wait for Mozilla, I'm happy that I spent.

• How can I get javascript to work with version 18 - all boxes checked but still problem

  I have WINDOWS 8 (for 2 weeks), Firefox v18. I try to use a banking site that requires javascript, but when I try to use the site, I get "javascript not working (or available).
  If I go into Youtube, any video that I take is unable to run - instead I get Flash video screen
  I put active Javascript but not difference.
  can someone point me in the right direction.
  I've reloaded Firefox and reset problem persists

  Hello, you can try to reproduce this behavior when you start firefox in safe mode, once? If not, perhaps an addon intrudes here...

  Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox

• How can you get firefox to work with the windows subst command locally?

  I want to test my Web site locally using the windows subst command to emulate the root of my site. It works perfectly with IE8 (except IE8 displays the different available to firefox) but does not work with Firefox. All images, sheets, styles and anything with a root path does not work. If I use a relative path (.. /.. / for example) to the objects that they works very well.

  How can I view web pages locally by using a path root of Web site?

  Firefox does not allow access to local files.
  
  It is always best to use relative addressing.

  See also:

  • http://KB.mozillazine.org/Links_to_local_pages_do_not_work

• Samsung wireless surround does not work with Airport wifi network

  I have a smart tv with a Soundbar and wireless - all Samsung two speakers. I should be able to set up surround sound via the network wireless like this http://support-us.samsung.com/cyber/popup/iframe/pop_troubleshooting_fr.jsp?idx= 629802 & modelname = WAM7500 & modelcode = WAM7500/ZA

  It works fine when it connects to the router provided by my ISP sky. But when I try to do the same when connecting to the network created by the airport, it won't work no-more precisely, I'm unable to select "link Multiroom' (step 19 in the link above).

  Note: There is no problem connecting to the wifi network - it's this last step which is the issue.

  Any ideas as to why this may be the case?  I need to use the extended network of the Hub of sky wifi is very low when the TV is.

  Here is the configuration...

  Router-> Airport Extreme-> Airport Express-> TV + Surround Sound

  (Airport extreme is the bridge mode value and the expansion of the wifi network Express).

  Thank you

  Jeremy

  TV: Samsung UE40H6400

  Soundbar: Samsung HW-K650

  Rear speakers on your TV: Samsung R1 2

  I'm not familiar with Samsung wireless speakers, but let me see if I can help. What is the brand and model of your router provided by Sky? You have configured to provide a Wi - Fi network? Is the Wi - Fi network, provided by the extreme and extended by the Express, a second wireless network with a different SSID or using the same SSID as provided by the router from the sky?