Understanding i - pod!

Similar Questions

• Ear Pods with iPod G5

  Hello guys.

  I was wondering if there is a way I can update my iPod so it can use the buttons on the pods of my ear. The model number is

  • A1136: 2006-09

  If there is no way, I can deal with it. If there is a way, that would be great.

  Thank you.

  Hi, cutlercollin99!

  Thank you for using communities Support from Apple. I understand from your post, you want to know if the controls on the Apple EarPods are compatible with your model of iPod. I listen to music on the go all the time and know these controls can be practical! The article below the link should help answer that question.

  Compatibility of wired Apple models of headphones with the models of iPod, iPhone and iPad

  In the 'iPod' section, there are four separate tables, each pertaining to a different model of Apple headphones. Go to the table for the helmet that you have and find your model of iPod. A check mark will be in a box for each component supported. You will also see if other requirements, for example a specific operating system version, are needed to support these features.

  Good listening!

• The 'Reading list' option disappeared from my i - Pod classic, although my different playlists appear always on my i-Tunes.

  The 'Reading list' option disappeared from my i - Pod classic, although my different playlists appear always on my i-tunes. Any suggestions?

  Hi Mark,

  Welcome to Apple Support communities.

  As I understand it, there is a problem with reading lists is no longer appearing on your iPod classic. Among the easier troubleshooting steps you can try, which is likely to solve this problem, is to reset your iPod, as shown here:

  Learn how to reset your iPod - Apple Support

  If the problem persists, you can exclude any problems of restoration of your iPod software as described in the article below.

  Use iTunes on your Mac or PC to restore your iPhone, iPad or iPod settings - Apple Support

  Ciao.

• Cannot synchronize media player for I Pod Shuffle.

  Why does my media player not recognize my I Pod Shuffle? I installed the latest version of i TUNES and the I pod plugged into a different port on the computer.
  Thank you
  Pig Parrot

  Hi Parrot Hog.

  Welcome to Microsoft Answers Forums.

  Windows Media Player are not compatible with the iPod. You may need to purchase a plug-in to sync the iPod to your windows media player.

  IPod is designed to synchronize with ITunes.

  Use your favorite search engine to find the plug-in that helps you accomplish the task.

  Important note: this response contains a reference to third party World Wide Web site. Microsoft provides this information as a convenience to you. Microsoft does not control these sites and no has not tested any software or information found on these sites; Therefore, Microsoft cannot make any approach to quality, security or the ability of a software or information that are there. There are the dangers inherent in the use of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet.

  For more information, you can also contact Apple.
  http://www.Apple.com/iTunes/download/

  Halima S - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I would like to know how to get videos I donefrom my i pod nano to the computer

  I would like to know how to get the videos I did of my i pod nano to the computer please

  Hi moviemanlo,

  Try the steps mentioned in the link below and check out them.
  http://support.Apple.com/kb/HT3837
  Important note: this response contains a reference to third party World Wide Web site. Microsoft provides this information as a convenience to you. Microsoft does not control these sites and no has not tested any software or information found on these sites; Therefore, Microsoft cannot make any approach to quality, security or the ability of a software or information that are there. There are the dangers inherent in the use of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet.

  If the previous step fails then try posting your question in the forums of Apple.
  http://discussions.Apple.com/index.jspa

  I hope this helps!

  Halima S - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Effect of allowing disjoint networks UCS L2 for existing pod

  Servers within our UCS pod existing v2.0 (3 c) need new connection to a network of layer 2 in our datacenter. This network is not accessible to the Juniper switches to the North of our current 6248 fabric of interconnections.

  After reading the documentation, it seems that "disjoint networks layer 2" may be the answer. If I understand correctly, we would have cable redundant connections to 6248 unused ports to switches that host this network of layer 2 and follow the guide associated with that vlan L2 these ports.

  However, I also understand that I need to tweak the configs for our existing fabric and the fabric port channels B that hosts all the VLAN "normal." I fear that doing so may impact on the network for computers UCS hosts on these networks, or may necessitate a restart/reacknowledgement of existing hosts of UCS. Am I being too pessimistic?

  See you soon,.

  Paul

  Hello Paul,

  I would indeed provide a window of failure because you configure VIRTUAL LAN Manager to associate some VLANs for the uplinks on each FI, it will be re-pinn all vEths which will cause a slight disruption in traffic.  According to the degree of sensitivity are your applications they may or may not be affected - I'd do it wrong side of caution and take a maint 1 hour. window to set up and test accordingly.

  By default, all them VLANS are allowed on all uplinks.  As soon as you add a VLAN to an uplink channel / port specifically via the VIRTUAL LAN Manager, he gets explicitly cut off the coast of all other channels of uplinks / port for FI.

  A great way to check your configuration is once you have everything configured as you see, you vous connecter connect to the UCS CLI interface, "connect nxos" and run 'show int trunk '.  You should see the VLAN on uplinks necessary - with the exception of the VLAN 1, that will be allowed on all uplinks.

  Kind regards

  Robert

• Pods: How redivide them?

  I've arranged my pods in Framemaker tool along the right side of my screen. They are classified in a logical way for me.

  However, when I reorganized the tools, I have lost the pod splits. So I now have large pods with independent tools

  Question: How to I cut the pods - that is, create more pods by their separation in small pods - so that the tools can be grouped logically? Thank you.

  Hi Bob,

  If I understand correctly, and if you have saved your original setting as your own workspace. All you have to do is to reset your workspace using the tool (arrow downwards) in the upper right.

  LS

• Get the number of users of the pod of the Roster

  Hello, I am trying to display the number of users online by using the pod of the list, but I can't understand how do. Does anyone have any suggestions?

  Kind regards.

  List Pod is just a user interface component that displays all the users. It will be

  show users in the room by default, you will not have to do anything, unless

  your anonymous presence is enabled.

  If you want to get users and their details, you must use

  userManager.userCollection which is a collection of the ArrayCollection that contains all the

  users. Similarly, if you want to get only the hosts or participants only.

  You should get userManager.hostCollection or

  userManager.participantCollection and so on.

  Hope this helps

  Thank you

  Hironmay Basu

• Pod in another language

  Hi all

  I of the Brazil and would like to know if a hava to change the language of the Pod of another langegue, and how do I do this?

  Very thanks!

  Again, LCC is delivered with a location manager, which gives a 'English' message returns the correct translation.

  By default, the provided implementation simply returns the value passed as input (the message in English). You can see in src/com/adobe/coreUI/localization/LocalizationManagerNoOp.as.

  You can provide your own implementation of location manager and activate it like this:

  com.adobe.coreUI.localization.Localization.impl = new MyLocalizationManager();

  In your application if you want to support a single language, you can have an object returning the appropriate for each message in English translation.

  If you want to support multiple languages, you can load this object of different files whenever you select a new language.

  To understand what you need to support the messages I'm afraid, you will need to look for the code "_lm.getString" and get strings from there:

  For example, these are some of the messages in the chat module:

  _lm. GetString ("ENTERED Chat here")

  _lm. GetString ("Send")

  _lm. GetString ("send message")

  _lm. GetString ("Color")

  _lm. GetString("to:")

  _lm. GetString ("everyone")

• An error in this Applescript that I can't understand

  Hi, I searched some forums and found this script below which I modified. It works great except for a single statement:

  runScript If = 1 then number error -128 I want the script to do is, when a USB drive is mounted and is in the ignoredVolumes as "USB Untitled" I want the script to stop. What I can't understand is, runScript is set to 1, "Untitled USB" Monte, runScript is not changed, why don't the script stops with an error "user cancelled"? On the other hand, if a key USB Monte is not in the ignoredVolumes, runScript is set to 2 and copy the file I want it. What hurts? It's probably something that will be very obvious when I see the answer.

  Thanks for any help with this problem,

  Mike.

  
  

  
  

  property ignoredVolumes: {'10,10 30 1. 5 't', 'files 1. 5 't', "Untitled USB"} - add if necessary

  property videoExtensions: {"avi", "mov", "mpg", "wmv", "mp4" and "mkv"}

  the value newVolume to the alias (POSIX file "/ Volumes/files 1.") ("5T / new")

  the value oldVolume to the alias (POSIX file "/ Volumes/files 1.") ("5T / old")

  game runScript to 1

                 tell application "System events".

  the value rootVolumes to disk (POSIX file ' / Volumes ' in the text)

  the value allVolumes to name of every element of disc of rootVolumes

  the value numofallVolumes to the County of allVolumes

  Repeat with the present book in allVolumes

  say application 'Finder '.

  if (the present book is not in ignoredVolumes and (this book as text) is not '. ') DS_Store') then

  if there are alias (POSIX (' / Volumes / "& the present book) as text file ) then game runScript to 2

  runScript If = 1 then number error -128 - it does not give a 'User cancelled' error when "Untitled USB" is mounted

  runScript If = 2 then

                                                                          try

  duplicate (elements whose name is in the videoExtensions extension) in alias (POSIX file (' / Volumes / "& the present book &" / new ") as text) to newVolume

  on error number errorNumber errorMessage

  _error value of errorMessage

  _errorNum the value to errorNumber

  If errorNumber is -15267 then

  display the dialog box "This file already exists in folder a." buttons {"OK", "No"} default button 1 with the title "Film copy error?" giving upwards after 10

  If the returned button of result is 'No' then

  Error number-128

  on the other

  If the result is 'OK' or back button gave up lead and then of

  eject the present book

  display the dialog box "U S B D r i v e E j e c t e d - K O t o R e m o v e" {"no need to click on this button"} default button 1 button give up after 5

  return

  end if

  end if

  end if

  end try

  Try

  duplicate (elements whose name is in the videoExtensions extension) in alias (POSIX file (' / Volumes / "& the present book &" / old ") as text) to oldVolume

  on error number errorNumber errorMessage

  _error value of errorMessage

  _errorNum the value to errorNumber

  If errorNumber is -15267 then

  display the dialog box "This file already exists in the folder B" buttons {"OK", "No"} default button 1 with the title "Film copy error?" giving upwards after 10

  If the returned button of result is 'No' then

  Error number-128

  on the other

  If the result is 'OK' or back button gave up lead and then of

  eject the present book

  display the dialog box "U S B D r i v e E j e c t e d - K O t o R e m o v e" {"no need to click on this button"} default button 1 button give up after 5

  return

  end if

  end if

  end if

  end try

  display the dialog box "USB key will Auto Eject in 10 seconds or click OK... "buttons button 1 with the title"copy Complete - Eject? "default {'OK', 'No'} which gives after 10

  If the returned button of result is 'No' then

  Error number-128

  on the other

  If the button returned of result is "OK" or gave up a result then ejection of the this book

  display the dialog box "U S B D r i v e E j e c t e d - K O t o R e m o v e" {"no need to click on this button"} default button 1 button give up after 5

  end if

  end if

  end if

  end say

  end Repeat

            end say

  The way in which your external block If is currently based, the script can't do anything when this book is in the ignoredVolumes, it can not yet test the runScript value. Try something like this:

  If the present book is in the ignoredVolumes then

  game runScript to 1

  on the other

  if (the present book as text is not '. ') DS_Store') then

  if there are alias (POSIX (' / Volumes / "& the present book) as text file ) then game runScript to 2

  end if

  end if

  
  

  Of course, you need to remove a "end if' the end of the script.

  
  

  
  

• My i pod classic has no summer when option in I tunes 12.5

  My I pod classic has no summer when option in i tunes 12.5.  I want to manage my iPod

  Launch iTunes and connect the iPod.  The iPod is displayed as a button on the device, close to upper left corner of the iTunes window.  This screenshot of my iTunes appears iPod device button, circled in red

  

  Click this button to display the settings of the iPod summary screen in the iTunes window.  Along the left side of this screen, in the sidebar, in setting, click the iTunes (like the music) media type to set up automatic synchronization for this type of media to iTunes.

  So if you are more familiar with the "tabs" to set up the iPod, who went in the upper part of the window of iTunes Plus, it works the same way, except that the features are now in the sidebar on the left side.

• Classic i - pod, i-tunes not recognized not

  plugged the iPod on a Mac Classic.  Naturally, it erases all the music on the iPod. However, none of the music on the Mac was recorded on the ipod.  The monitor of playback for music stated, 'no music'.  Then, to make matters worse, when I plugged the ipod into my PC, it has not copied anything from the computer.  I went to devices on the drop of i-tunes, but the iPod does not appear as a device.  At one point, I got a warning to the effect that the iPod was corrupt.  I tried to reset by pressing the menu and select button, got the picture of the Apple, but still i-tunes does not recognize the device.  I tried this on another PC, that I have before at the end.  Same result. Both computers have the latest version of i-tunes.  On the page 'about' on the i - pod, I see that the version is 2.04PC, so I guess that the original software was for a PC and plug it into a Mac that messed up.  Can I load onto the ipod via the internet on PC?

  Naturally, it erases all the music on the iPod.

  Don't know what that means "naturally"...  If iPod was already associated with your Windows computer's iTunes library and you connected to your Mac, it shouldn't erase the iPod unless specifically can you tell iTunes Sync music library iTunes to Mac or do a restore (to erase the iPod).  Since that it has been deleted (probably with a restoration), after the restoration, the iPod uses the manually manage music and videos by default.  It still "synchronizes" but nothing is loaded onto the iPod.

  If you are planning that iTunes to automatically sync your music library on iPod, you assign to Sync music.  Find the iPod touch device in iTunes.  Here is a screenshot of the upper left corner of my window in iTunes, iPod button circled in red

  

  Click this button to display the settings of the iPod summary screen in the iTunes window.  Along the left side, in the sidebar, under settings, click on music.  To the right, the music from the iPod settings screen.  Check the box to Sync music.

  NOTE: All of the songs on the iPod that are are not in your iTunes library (on computer) will be lost.

  This enables automatic synchronization.  You can choose to synchronize the entire music library (if it fits) or a part of the selection .  Set up this screen as desired, then click apply to sync.  Further, iTunes automatically keeps iPod "in phase" with the changes to your music library (or the selected part of it) when you connect the iPod (or click sync , if already connected).

  NOTE: If your iPod is currently "corrupt", you will need to do a restore of the iPod in iTunes, before you can set it up to Sync music.  The restore button is on the settings of the iPod summary screen in iTunes.  Use any computer you plan to use with the iPod, to proceed to the restore.

  Can I load onto the ipod via the internet on PC?

  Embedded iPod software is the same, the only difference is how, the iPod's hard drive is formatted for Mac or Windows.  And do a restore on the iPod in iTunes, it's how the iPod software is reinstalled.

• How can I sync my I Pod Nano

  I have an I Pod Nano 6th generation 8GB serial #C8 * model DVY # 689LL.

  I the have not used in years. I have a Windows desktop PC, and I deleted all of the Apple software on it years.

  It seems to me that I used to be able to sync only my I Pod Nano and my I Pod simply going on I Tunes site and signing in and your Apple product would be present on the left side of the page. I don't see that now.

  I also have an I Pod Classic 80 GB.

  Do I have to install the Apple software on my Windows desktop to be able to sync my Apple devices?

  Thank you

  TomS

  < personal information deleted by host >

  You must have iTunes or another iPod to put music on an iPod Manager, other than an iPod touch.

  (144918)

• New air pods seems it will drop earrings without ear easily hook, isn't it?

  New air pods seems it will drop earrings without ear easily hook, isn't it?

  Since they have not been released, it is difficult to say. Tim Cook told a CBS correspondent that it was their use and they have yet to fall again. You will have to wait until they are released and have been tested. You can also view some tech sites that report on Apple products. There were a few minor events of them at the same in San Francisco and information was written.

• Is Siri macos sierra - final list of control system that siri understands?

  I've seen excerpts of suggest some system settings that Siri can control, for example "switch off bluetooth", what is optimal, but "turn off the bluetooth mouse" would be more useful batteries changing as the former makes my imac (with mouse and wireless keyboard) totally unusable and unrecoverable without turning off or dig this long-lost old Dell USB keyboard TAPI at the bottom of the Cabinet.

  FWIW if you try siri "switch off the bluetooth mouse" just does not take into account the part of the mouse and disables it all!

  Then, I browsed the net to get a list of orders for the system or settings that siri understands and found the same things, 4 or 5, re-stuck again and again.

  I tried to ask Siri what settings it could change and says "Bluetooth is already lit" doh?

  Beats me why and maybe there isn't and I found it simply not, apple have not documented it better - all I could find was this macOS Sierra: ask Siri

  So has anyone seen a better resource for whats possible?

  Hello, Jessica,.

  Go to this website: https://hey-siri.io

  Then got to settings > macOS Sierra to see the commands of the Sierra