GetHeight@CRMImage@@QBEHXZ could not be located in the dynamic link UXcore.dll liburary.

Similar Questions

• Starting problems. - RunDLL32.exe, procedure entry point_except_handler4_common could not be located in the dynamic link librarymsvcrt.dll

  I get the message RunDLL32.exe, procedure entry point_except_handler4_common could not be located in the dynamic link librarymsvcrt.dll. What should I do?

  I had starting problems, boot loop, I think it seems to have been resolved by using the last known good configuration, but I get this popup dialog box. I've not closed for fear that it will start XP looping again.

  Hi EddieBryan,

  1. did you of recent changes on the computer?

  2. do you have security software installed on the computer?

  3. when exactly you receive the error message?

  Method 1
  Check if the problem persists in safe mode and after return with the result.
  A description of the options to start in Windows XP Mode
  http://support.Microsoft.com/kb/315222

  Method 2
  If the problem does not persist in safe mode, then it is possible that some third-party programs installed on the computer is causing the problem.
  I suggest that you configure the computer in a clean boot state and check if it helps.
  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
  See section to learn more about how to clean boot.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353
  Reset the computer to start as usual
  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
  1. click on Start , then click run.
  2. type msconfig , then click OK.
  The System Configuration Utility dialog box appears.
  3. click on the general tab, click Normal Startup - load all services and device drivers and then click OK.
  4. When prompted, click on restart to restart the computer.

  Method 3

  If the previous step fails then I suggest that scan you SFC on the computer that will search the corrupted system files and try to correct them.

  The analysis may take some time, so be patient. Windows allows to fix corrupt or missing files it finds. If the information of the installation CD is required to fix the problem, you may be asked to insert your Windows XP installation CD.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

  You are prompted to insert a Windows XP SP2 CD when you try to run the tool on a Windows XP SP2 computer system File Checker

  http://support.Microsoft.com/kb/900910

• Error number statup topic = the procedure entry point xml name AppleSyncNotifier.exe text reader const could not be located in the dynamic link libxl2.dll

  Original title: sign of problems

  at the start of my system, I get the following, called = AppleSyncNotifier.exe he then continued to say in the dialog = the procedure entry point xml text reader const name could not be located in the dynamic link libxl2.dll, it prevents me from doing whatever it is on the opening page, anyone help? John

  Hello

  AppleSyncNotifier.exe is part of ITunes. To resolve the issue, try the following methods.

  Method 1:

  I suggest that you download and reinstall ITunes since this link provided below to fix the problem.

  http://www.Apple.com/downloads/

  Method 2:

  You can perform the clean boot in order to eliminate the problem.

  Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note:

  After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  For further assistance, you can get in touch with support for ITunes.

  https://discussions.Apple.com/community/iTunes?CategoryID=149

• the procedure entry point NSSUTIL_EscapeSize could not be located in the dynamic link library nssutil3.dll

  Windows XP with Firefox 18.0.1 does not open when upgraded to the latest version.
  Error messages have been
  (1) the procedure entry that point pr_setcurrentthreadname could not be located in the dynamic library (2) ndpr4.dll the procedure entry point NSSUTIL_EscapeSize could not be located in the dynamic links (3) library nssutil3.dll was not able to load XPCOM

  A ran malware & anti-virus software then deleted Firefox via Control Panel, then residual file file C:\Documents & Folders\ApplicationData\Mozilla Director and program folder.
  Local & installed products ndpr4.dl and nssutil3.dll - fresh reinstall firefox several times - he got rid of the error message 1 but not 2 or 3 always cannot open Firefox.
  All solutions?

  I have this problem and I use Zone Alarm Extreme Security with Force active field. I found that by turning off the virtual Cache in Zone Alarm that this problem has disappeared and has been able to restart firefox.

  Here is a post I found that addresses the issue in some way. http://KB.mozillazine.org/Browser_will_not_start_up#Firefox_does_not_start_after_updating_with_ZoneAlarm_ForceField_enabled

• get this message at the startup of Firefox 5.0: entry procedure CERT_FindSubjectKeyIDExtension point could not be located in the dynamic link library nss3.dll

  get this message at the startup of Firefox 5.0: entry procedure CERT_FindSubjectKeyIDExtension point could not be located in the dynamic link library nss3.dll

  Hello

  You can try to install the latest version on the current: https://www.mozilla.org/en-US/firefox/new/

• After you install a Foxfire 5.0 update, I get this message when you try to open Mozilla: the procedure entry point sqlite3_db_status could not be located in the dynamic link library mozsqlite3.dll.

  I get this message when you try to open Mozilla: the procedure entry point sqlite3_db_status could not be located in the dynamic link library mozsqlite3.dll.

  Do a clean reinstall.

  Download a new copy of Firefox and save the file to the desktop.

  • Firefox 5.0.x: http://www.mozilla.com/en-US/firefox/all.html
  • Uninstall your current version of Firefox.
  • Do not remove the data of a personal nature when you uninstall the current version.

  Delete the program folder Firefox before installing newly downloaded copy of the Firefox installer.

  • It is important to remove the Firefox program folder to delete all the files and make sure that there is no problem with the files that were the remains after uninstallation.

  Your bookmarks and other profile data is stored in the Firefox profile folder and will not be affected by a relocation, but make sure that you do not select delete data of a personal nature if you uninstall Firefox.

• McUICnt.exe - ordinal not found that 459 ordinal could not be located in the dynamic link library urlmon.dll.

  McUICnt.exe - ordinal not found that 459 ordinal could not be located in the dynamic link library urlmon.dll.
  Please tell us how to solve this error message. It does not seem to affect processes, just an annoying message that will not disappear. Help, please

  [Moved from comments]

  Hey Carol,.

  It would help if you could answer these questions.

  -What version of Windows is installed on the computer?
  -What antivirus software do you have on the computer?
  -When you get this error? It is when the computer starts for the first time?

  Here are a few troubleshooting steps that you can try to get the matter sorted.

  First of all, if you have Mcafee AntiVirus installed on the computer, turn it off for awhile and see if the error. McUICnt.exe is a file that is

  used by Mcafee and could be the reason for the error.
  Note: Antivirus should be reactivated when you have completed troubleshooting. Computer with antivirus off is: exposed to the virus.

  If Mcafee is not the cause, then try to do a scan complete antivirus on the computer in safe mode with networking using the Microsoft Safety Scanner

  Make sure that the computer is virus-free.

  Safe mode with networking: http://windows.microsoft.com/en-in/windows7/start-your-computer-in-safe-mode

  Note: the steps mentioned in the link applies to Windows vista and Windows 7.

  Microsoft Safety Scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

  Let us know the results.

• Ordinal 423 could not be located in the dynamic link library urlmon.dll

  After the download of Internet Explorer 8 and computer restart, I get the error message that the ordinal 423 could not be located in the dynamic link library urlmon.dll. I have nothing, no start menu, icons whatever it is. even when you start in safe mode. Please help me solve this problem

  Thank you

  After the download of Internet Explorer 8 and computer restart, I get the error message that the ordinal 423 could not be located in the dynamic link library urlmon.dll. I have nothing, no start menu, icons whatever it is. even when you start in safe mode. Please help me solve this problem

  Thank you

  You can either try the system restore before installing corrupt of IE8 has taken place or you can try to copy / to register theurlmon.dll in doing so:

  Click the Windows key + R key on your keyboard to open the command run and type:

  regsvr32 urlmon.dll click [Ok ] or press [Enter ] on your keyboard. Reboot and see if you can see the desktop.

  If you have still questions try clicking on the Windows of your keyboard key and open the start menu, click onall programs > Accessories > system tools > System Restore.

  How to reinstall or repair Internet Explorer in Windows Vista and Windows XP
  http://support.Microsoft.com/kb/318378/

  How to uninstall or remove Internet Explorer 8?
  http://support.Microsoft.com/kb/957700/en-us

  How to solve Internet Explorer 8 installation problems
  http://support.Microsoft.com/kb/949220/en-us
  How to solve Internet Explorer 8 installation problems
  http://support.Microsoft.com/kb/949220/en-us

  How to install Internet Explorer 8
  http://support.Microsoft.com/kb/970310/en-us

  Let us know your progress or if you need more help.

  NASS - http://www.nasstec.co.uk

• The procedure entry point?getText@FxtField@@QBE? AVFXWString@@XZ could not be located in the dynamic linklibrary fox.dll

  I get the error message "the procedure point?getText@FxtField@@QBE entry? "AVFXWString@@XZ could not be located in the dynamic linklibrary fox.dll ' when I boot.  How should I do?

  Looks like it has something to do with the Acronis software, there is an old post here: -.

  http://Forum.Acronis.com/Forum/6553

  If it is of no use and that you use the disk imaging software and then uninstall it or go to start/run type msconfig press enter and edit startup.

• Cannot install Internet Explorer 8, error: the ENCODEPOINTER procedure entry point could not be located in the DYNAMIC LINK LIBARARY KERNEL32.dll.

  Original title: the ENCODEPOINTER procedure entry point could not be located in the DYNAMIC LINK LIBARARY KERNEL32.dll.

  PACKAGECUSTOMIZER. EXE-

  I just built this computer and Windows XP support.  In order to use IR, I needed to update in softtware.  The following error messages we received during the download process.  The procedure entry point ENCODEPOINTER could not be located in the DYNAMIC LINK LIBARARY KERNEL32.dll.  It is one of the error messages that I received everything trying to downloand IE8.  The other was: SHREGGETVALUE W procedure entry point could not be located in the DYNAMIC LINK LIBARARY SHLWAPI.dll.  Because of these two errors, the software was never fully charged.

  What are these codes and how can I fix them?

  Hi CharlesPortillo,

  Follow the steps in the article.

  How to install Internet Explorer 8

  How to solve Internet Explorer 8 installation problems

  For reference:

  How to solve problems when you install or uninstall programs on a Windows computer

• 7426 ordinal could not be located in the dynamic link library mfc90u.dll

  While installing Samsung Kies, I get following error

  7426 ordinal could not be located in the dynamic link library mfc90u.dll?

  Try to download Visual C++ 2008 SP1 from the link below

  http://www.Microsoft.com/en-us/download/confirmation.aspx?ID=5582

  I also had the same problem after installing it the ordinal error went over the Kies also updated.

• When you run Formula1 2011, error that says: the 5377 ordinal could not be located in the dynamic link library xlive.dll

  5377 ordinal could not be located in the dynamic link library xlive.dll?
  shows it is when I opened formula1 2011 'the game '.
  and I have already install game for windows, please help me I did every thing but the problem is still :(

  original title: the 5377 ordinal could not be located in the dynamic link library xlive.dll

  Try to update your MICROSOFT GAMES FOR WINDOWS LIVE, simply open e it update automatically and after the game running perfectly
  Good luck

• the ordinal 9272 could not be located in the dynamic link library mfc90u.dll

  Try to install the Elgato video capture program receive the error message following the 9272 ordinal could not be located in the dynamic link library mfc90u.dll

  Hello

  The question could be linked to the source of when you try to install the program.

  I suggest you to copy the download to your computer first and then try to install the program and check if that helps.

  Follow the steps to save the download on your computer.

  a. click on the downloaded file.

  b. click Save.

  c. Select Office.

  d. click Save.

• 5372 ordinal could not be located in the dynamic link library xlive.dll.

  Hi how are you?

  When I try to open a game, he says ordinal .the 5372 could not be located in the dynamic link library xlive.dll.

  Please help me solve this problem & thank you.

  Kind regards.

  Hello

  1. what game you try to play?

  2. were you able to play this game before?

  3. did you of recent changes to the computer?

  This problem occurs especially if the Live is not updated on the system, I suggest you download the latest version of windows live update from the link below and check if you are able to play the game or not.

  http://www.Microsoft.com/games/en-us/aboutGFW/pages/gfw3intro.aspx

  I also suggest that you send your query in the forums of Games for Windows Live for help.

  http://www.Microsoft.com/games/en-us/support/pages/default.aspx

  http://forums.gamesforwindows.com/search/searchresults.aspx?q=dynamic+link+library+xlive.dll

  Hope this information is useful.

• procedure entry point _except_handler4_common could not be located in the dynamic link library msvcrt.dll

  I installed assassin creed III, but when I want to play it game this error:

  procedure entry point _except_handler4_common could not be found in the dynamic link library msvcrt.dll.
  I don't know how can I solve the problem.please help me

  Hi mosi0098,

  Welcome to Microsoft Community where you can find all the answers related to Windows. You get the error message when you try to install the game, try the steps in this article and check:

  Error message: Procedure Entry Point not found in Msvcrt.dll file

  http://support.Microsoft.com/kb/324762

  Hope this information helps. If you have any other questions feel free to respond and we would be happy to help.