getting external backup system

Similar Questions

• VMware CBT (tracking changes block): ctk files and multiple backup systems?

  Hello

  We have 2 datarecovery running backups of the SAME virtual machines, but on the other day.

  Later, we will have a dedicated backup solution, so we will use only 1 VDR + external backup system.

  The external backup system use CBT too.

  Now my question is: how CBT done when several backup systems require "that is the last blocks changed since the last backup?

  I mean if I run Sunday, on the same VDR2, VMs and VDR1 Saturday to VDR2 always have only the changed blocks from Saturday to Sunday and the blocks changed the week lack? !!!

  Could someone provide me a technique explaining the depth of the CBT mechanism?

  Thank you

  Yes, once a block is modified the corresponding location in the mapping file is labeled with the new changeID.

  André

• I am unable to back up windows Vista on an external drive that I am cant get full backup - error 0 x 80070005

  original title: error message

  I am unable to back up windows Vista on an external drive that I am cant get full backup - error 0 x 80070005. How to overcome this please? Thanks for your help. Kay Alexander

  Hello

  see if this information helps you

  How to make a backup of your data (all Vista versions)

  http://www.vista4beginners.com/how-to-backup-your-data

  How to restore your files

  http://www.vista4beginners.com/how-to-restore-files

  the 1st link below is how do the backup complete pc (Vista, full and professional company)

  http://www.bleepingcomputer.com/tutorials/tutorial145.html

  and that is how do to recover the backup complete pc

  http://www.bleepingcomputer.com/tutorials/tutorial144.html

  and here is the information of microsoft in restoring a system image backup

  http://Windows.Microsoft.com/en-us/Windows-Vista/restore-your-computer-from-a-system-image-backup

  If you have problems with the repost of process above in forum microsoft link that is specific to the backup below questions

  "This forum supports questions for the default backup utility in Windows Vista, Server 2008 and beyond."

  http://social.technet.Microsoft.com/forums/en-us/WindowsBackup/threads

• I get this error on backup system 0 x 80070002

  original title: backup system error

  When my computer do regular back I get the error message: the system cannot find the specified file (0 x 80070002).  How can I get my backup to run?

  Hello

  make backups on an external hard drive or DVD

  see if this information helps you

  How to make a backup of your data

  http://www.vista4beginners.com/how-to-backup-your-data

  How to restore your files

  http://www.vista4beginners.com/how-to-restore-files

  the 1st link below is how do the backup complete pc

  http://www.bleepingcomputer.com/tutorials/tutorial145.html

  and that is how do to recover the backup complete pc

  http://www.bleepingcomputer.com/tutorials/tutorial144.html

  If you have problems, it's in here is a forum for microsoft specifically for backup issues

  http://social.technet.Microsoft.com/forums/en-us/WindowsBackup/threads

• File system for FRA and external backups

  Oracle 11g R2.

  The FRA drive is formatted using Linux x 83 put on Diskgroup + FRA system.

  Backups are stored outside on an ext3 file system.

  Suppose now the database gets completely crashed and I need to recover by continuing external backups.  I will copy the external backups to the + FRA disk and then perform the recovery from there.

  My question is, given that external backups are on ext3 file system, while the FRA is the Oracle ASM filesystem, there will be a problem for the use of the file systems of the two difference?

  Thank you

  Scott

  scottjhn wrote:

  To summarize the issue:

  In my system, the database will be on ASM disk group + DATA (disk1 disk2).

  I will use another disk, disk3 (ext3 file system) for FRA, to organize data files backups and multiplexed logs (archive logs, online newspapers and control files).

  Earlier you said "I'll use the + FRA (ASM disk group) for the fast recovery area that holds that archiving multiplexed logs, recovery online logs, and control files.»  Nothing else. »

  Now, I need one more place to hold the copy of the multiplexed logs.

  Wouldn't not on the same + (ABOVE)?  Alternatively, use a disk full-fledged, disk4 (ext3 file system)?

  Thank you

  Scott

  First of all, the reason for multiplexing online redo logs and control files is not the same as that of multiplexing archivelogs. Do it online and the control file are actually a part of the database.  The database will not work without them.  This is why it is so important to have multiplex.  Archivelogs, on the other hand, are part of your backup strategy.  The database itself really doesn't care if you have any archivelogs at all.  The archivelogs multiplexing is much less common.  I have never multiplexed mine, but I do not have a task that runs every hour to copy any newly created on a server off-site.

  If your database is on ASM, at least a control file and a member of each group of redo log must be in ASM.  Technically, is not having to be, but it's really foolish not to do so.  Where to put the second copy?  Probably several schools of thought on this.  If your FRA is on ext3, so it seems a simple decision... a FRA copy, a copy in its default location in ASM.

• I want to save a file in photoshop to one but external backup, get pop ups saying write access is not granted or Volume misread me only folder to another volume?  Not understand.

  I want to save a file in photoshop on an external backup however, I keep getting pop ups read... not granted write access... .and read only the file volume to another volume.   Not understand.

  No one can tell you anything without the proper system or other technical details info. If there are questions of security and permissions, so anything that adobe can fix it for you. Start by reading this.

  Preparations for installation. Error postal codes of Mylenium

  Mylenium

• I have an acer aspire one with windows xp preinstalled ~ y at - it a way to get a backup copy of the operating system? It is not working properely

  I have an acer aspire one with windows xp preinstalled ~ y at - it a way to get a backup copy of the operating system?  It does not work correctly

  See http://acer.custhelp.com/app/answers/detail/a_id/2631/kw/factory%20restore%20windows%20aspire%20one/related/1

• How to get the material status of ESXi host of external surveillance system?

  Hello!

  I've got hardware ESXi host information (for example, CPU, disk, etc.)

  that I want back outside a vCenter/ESXi for an external monitoring system.

  I really really slighty possible via Powershell saw...

  Thanks for your help!

  Hello

  the link that I commented, explian how to monitor the status of the ESXi hardware by using the cmdlets for powershell CIM 3.0.

  Not the virtual machines

  This, will you?

  Check this code from the link, you should notice that connects to an esxi host, not virtual machines:

  import-moduleCimCmdlets

  2	$ipaddress="10.20.177.15"

  3	$HostUsername="root"

  4	$CIOpt= New-CimSessionOption-SkipCACheck -SkipCNCheck -SkipRevocationCheck -EncodingUtf8-UseSsl

  5	$Session= New-CimSession-Authentication Basic -Credential $HostUsername -ComputerName $Ipaddress -port 443-SessionOption$CIOpt

  6	Get-CimInstance-CimSession$Session-ClassNameCIM_Fan

  Best regards

  Pablo

• I have a Version of OSX El Capitan 10.11.3 aged 5 years, 2.5 GHz Intel Core i5computer processor.  It is slow and jerky.  Any suggestions?  I empty the trash. I have an external backup.

  I have a Version of El Capitan OSX 5 years 10.11.3, processor 2.5 GHz Intel Core i5computer.  It is slow and jerky.  Any suggestions?  I empty the trash. I have an external backup.

  Update your software OS X v10.11.4.

  Instructions here > How to upgrade OS X

  If after the update is installed, you see always the same slow and jerky behavior, a Safe Mode boot removes the system caches that can help.

  Upper left corner of your screen, click on the Apple  > Shut Down.

  After your Mac stops, wait 10 seconds, then press the power button.

  As soon as you hear the startup tone, hold down the SHIFT key. You must press the SHIFT key as soon as possible once you hear the startup tone, but not before.

  Release the SHIFT key when you see the gray Apple logo and progress indicator.

  Once you are in Mode without failure, return to the menu Apple . In the drop-down list, click: reboot

  On Safe Mode

• What is a good external backup drive that won't empty my wallet

  I need to get an external backup drive for my PC, but do not know how to do in this regard. I've seen most are very Exspensive. Someone told me to get Seagate? Is - this right or which is a good thing?

  ... Someone told me to get Seagate?

  Seagate is trustworthy and has been for a long time. I also like WD (Western Digital).

  ... I've seen most are very Exspensive...

  The 'expensive' is subjective. The external drives that I've seen recently are <70 bucks="" per=""> terabyte. You can pay more for the bells and whistles of an external box which was dazzled, and you might get a player with a better fault tolerance.
  To say that males 70 from the perspective of my point of view, thirty years ago I paid $ 1,800 for a 160MB HARD internal disk.

• I have a laptop Toshiba Satellite L305-S5894 with Windows Vista Home Premium installed (32 bit). Unable to get a backup to a flash drive. Error: 0 x 81000029

  Original title: I have a laptop Toshiba Satellite L305-S5894 with Windows Vista Home Premium installed (32 bit).  Unable to get a backup to a flash drive.

  After back back, very many updates of windows, my computer is full of problems and it is not representative of the restore points far enough back to correct.  I want really to save my data and programs for flash drive (s) and then go for a full recovery of the system (return to factory).  When you try to do the backup on a 4 GB USB key I get an error including 0 x 81000029.  I have seen posted answers to this.  Everything is included to aid Vista disk from the window which was not included when I bought my computer. Any help would be appreciated.

  Hello

  The following article should be useful. To use system recovery options, you have Vista installation disc. OEM (Original Equipment Manufacturer) repeatedly will install on the computer Windows recovery environment. To cross check if it is installed, try the following steps.

  1 start the computer and press the F8 key continuously to get advanced boot menu options.
  2. on the menu advanced startup options, check if the Startup Repair tool is in the list.
  3. If so, select it and press ENTER.
  4. If not, then you should organize a Vista installation disc.

  You may receive error messages when you try to perform a backup operation on a Windows Vista-based computer
  http://support.Microsoft.com/kb/950167

• Windows 7 Ultimate 64-bit hangs during antivirus and backup system analysis

  I have problems with my PC. Last night, before retiring for the night, I noticed that Microsoft Security Essentials icon is yellow and warning me that my computer was in danger and had not been scanned for viruses for awhile. Normally it is set to run automatically on a schedule, but it does not work if my computer is set to go to sleep after a period of inactivity (which is because I want to save energy). So I have to manually run the virus scan. I have it set to run a FULL scan and then went to bed. In the morning, I noticed that my computer has been completely closed. It would normally be asleep and she simply by moving my mouse wake up. I had to hit the power button on my PC to start upward. The warning message that Windows did not close properly displayed and gave me the boot options. I just booted normally. As the virus scan has been the last thing my computer did the night before, I decided to try to run a FULL scan again. It crashed my PC. I started again and tried a QUICK analysis, which worked well. I searched "Microsoft Security Essentials plant system" and found a recent instance with someone else, and after more detailed diagnosis, they determined that it was probably a failing hard drive or a bad memory. The recommendation was immediately back up their system of hard drive and replace it.

  Before you run any Diagnostics to determine my culprit, I decided to start a backup system just to be safe. I ran Windows Backup and choose "Create a system image" and he has done on an external hard drive on a USB3 docking station. He got about 90% through the backup, then my system crashed. No error message, just a full stop.

  Unfortunately, a not save the link to the original set of instructions to diagnose why the system crashed during the anti-virus scan.

  Now I ask... What can I do to save my system if it crashes my computer?

  Hi Greg,.

  Thanks for posting your query in Microsoft Community.

  I understand that the system hangs when a complete analysis of how MSE or backup system and I'll be happy to answer your query. This could be due to MSE not updated and that's why he showed the yellow icon. We will try the following methods and check.

  Method 1: Microsoft Security Essentials (MSE) update

  For update to MSE, please see: How to manually download the latest Microsoft Security Essentials definition updates

  Here are some methods that you can try in order to solve the problem.

  Method 1: Perform the clean boot and check.

  To help resolve the error message, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Please note: After troubleshooting, be sure to start your computer in normal mode by following step 3.

  Method 2: Clean boot material and check.

  a. go to Start and type Device Manager in the start search field.
  b. type Device Managerand select Device Manager from the list programs.
  c. right click on the sound card, video card and NIC, one by one, then click on disable.
  c. restart the computer.

  If it solves your problem, allow hardware devices that in time to find the exact device originally this problem. After you find the device that causes the problem you can solve by installing the latest driver or replacement of the device.

  Method 3: Do restore the system from the Windows recovery environment and verify.

  What is system restore?

  http://Windows.Microsoft.com/en-us/Windows7/what-is-system-restore

  Important: System Restore will return all your files non-system as documents, email, music, etc., to a previous state. These files of types are completely affected by the restoration of the system. If it was your intention with this tool to recover a deleted file to non-system, try using a file instead of system restore recovery program.

  If the problem persists, or you have questions about Windows, do not hesitate to let us know. It is our pleasure to be of service.

• I have that one saved backup system, is there a reason to keep additional files prior to the last backup of system? I can remove them systematically?

  I run the Windows Image backup to a hard drive external on a weekly schedule. The result shows on the hard drive as "WindowsImageBackup\(User name)-PC\Backup (date) (number)"-currently about 80 GB (binary).

  I reserve about 135 GB of available space for backups of the system, so I save only the last backup of the system.

  So far, I have no problem with that.

  However, the disk hard, there is another folder '(USER NAME)-PC' & under which is a folder "backup of files (date) (number)" for each time that the backup system runs.

  These files vary considerably in size - for example, 1 GB, 12 GB, 22 GB. They delete or replace automatically - just, they accumulate.

  What I want to know is ~.

  What is the purpose\importance of these additional files?

  Since I only have a single saved backup, is there a reason to keep additional files prior to the last backup of system? I can remove them systematically?

  Original title: Windows Image backup

  Hello

  Thanks for the reply.

  File '(Computer name)-PC "contains the files necessary for the Windows. Data files saved in libraries, on the desktop, and if the Windows folders for all people with a user account on the computer are also recorded.

  [The default Windows folders include AppData, Contacts, desktop, downloads, Favorites, links, saved parties and searches.]

  The size of these files increases, because the content of the folders mentioned above increases.

  For more information, see the article mentioned below:

  How Windows selects the files to back up?

  http://Windows.Microsoft.com/en-us/Windows7/how-does-Windows-choose-which-files-to-back-up

  I hope this helps. Otherwise, feel free to write us again and we will be happy to help you.

  Thank you

• External backup error 0 x 80070002 on Windows 7

  When I do a Seagate Free Agent GoFlex external backup using the full backup, but then said: Backup has encountered a problem C; \Users\UpdatusUser\Favorites can't find file error specified 0 x 80070002. I am NOT real computer 'savvy '. I don't know what to do to solve the problem. I have read other forums that are similar to mine, but not only as mine. Help! I had the computer just a little more than a year, and it started just be a problem a few weeks ago.

  Hi BarbaraXA,

  Thanks for posting your question in the Microsoft Community forums.

  According to the description of the problem, I see that you are unable to perform a backup and the error message "Backup has encountered a problem; "C:\Users\UpdatusUser\Favorites can't find file error specified 0 x 80070002.

  I imagine the inconvenience that you are experiencing. We are here to help and guide you in the right direction.

  This problem occurs if Windows Backup tries to back up files in folders LocalLow, Contacts and research and that these files are not present on the computer.

  Note: These files are only created if certain applications are installed on the computer.

  Method 1:
  I suggest you try the procedure described in the article and see if it helps.

  0x8100002F error code and or error code 0 x 80070002 when you back up files in Windows 7
  http://support.Microsoft.com/kb/979281

  Method 2:
  If the problem persists, I suggest that you run SFC [System File Checker] scan on the computer that could scan all protected files to verify their versions to verify if there is any changes made to the files and if there is no corrupt files. And will replace them with the correct version.

  
  Use the System File Checker tool to troubleshoot missing or corrupted on Windows Vista or Windows 7 system files
  http://support.Microsoft.com/kb/929833

  Let us know the status of the issue after you perform the troubleshooting steps. If you need help or information about the issue with backup, I'll be happy to help you. We, at tender Microsoft to excellence.

• Failure of backup system image 0 x 8007003

  I tried to back up my system drive, but suddenly everything back up he stuffed me an error...

  Backup Failed: System image backup 0 x 8007003

  Please help me in this regard...!

  Hi Natasha,.

  Thanks for posting your question in the Microsoft Community Forums.

  According the description, I understand that you are trying to back up the system drive and you get an error: failed to backup system image 0 x 8007003.  Please don't worry. I'll help you with this problem.

  You use a third-party backup software?

  You can follow the steps in this article and check if it helps:
  Windows backup or restore 0 x 80070001, 0 x 81000037 or 0 x 80070003 errors
  http://support.Microsoft.com/kb/973455

  Get back to us with more information after the completion of these steps and let us know the result and I'll be happy to help you.