File system for FRA and external backups

Similar Questions

• Access to the file system for Extraction and load testing

  Hello
  
  I did a study with me the different techniques of Extraction and load using Oracle database as a source for the extractions and targets for loads.
  
  I would like to run the same tests on my test service to compare the run times.
  
  To do this, I need my schema to be able to write files and read them as external tables.
  
  I didn't need to download files, I can create using the UTL_FILE utility that comes with the Oracle database.
  
  My test service will include limited access to a directory read / write flat files?
  
  Thanks in advance,
  Stew of Ashton

  Stew,

  The cloud of Oracle does not support external tables, nor access to the OS files (utl_file etc.). Only, you have sftp and download access via Apex or SQL Developer to load or import data. Someday, there may be a place to store files in the cloud, but I don't know the details of this.

• What is the nucleus of a file system for any operating system or file system - at the heart of any os?

  Hello

  What is the nucleus of a file system for any operating system or file system - at the heart of any os? Thank you, BS

  Original title: file system - at the heart of any system

  Hello

  Use Bing or Google to find your answers.

  Here's a little info:

  File system
  http://en.Wikipedia.org/wiki/File_system

  Category: Computer file system
  http://en.Wikipedia.org/wiki/category:Computer_file_systems

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• System for power and volume icons disappeared.

  Original title: System icons

  My system for power and volume icons disappeared and I can't click on them to restore. I have a personal laptop and no system administrator I know. I don't remember doing anything unusual. They were here 1 day and went on the other.

  Hello

  Try Method 1 and if it is not available, try Method 3 in the link:

  "How to activate or disable the Notification area system icons in Vista"

  http://www.Vistax64.com/tutorials/106787-notification-area-system-icons.html

  You can also try a system restore to before that was the problem:

  «How to make a Vista system restore»

  http://bertk.MVPs.org/html/restoresysv.html

  See you soon.

• File system for data Essbase = &gt; NFS or other?

  Hello!

  We strive to put our Essbase cubes on a NFS file system shared for our Essbase cluster

  Performance is weaker than expected (2 x slower than our current configuration)

  I saw on internet that NFS is not recommended for Essbase 9 but nothing for Essbase 11.1.2.3.x on the doc of the EMP.

  -Are you using NFS for your Essbase data? What version of v3, v4?

  -What type of FS do you recommend (for linux)

  Thank you!

  Take a look at the setting guide - https://blogs.oracle.com/pa/entry/epm_infrastructure_tuning_guide_v11

  Article - "9.2 review of file system for EMP.

  See you soon

  John

• Failure of the system for Windows 8 image backup

  I downloaded Windows 8 a few days ago. I tried to create a system image to an external drive, Western Digital 500 GB (409 GB free) four times and each time after a few minutes a message said that the backup failed. The backup of the recovery Partition seems end OK every time. The failures occurred after a minute or two in the backup of the C: drive of the OS.

  The external hard drive checked OK. The player has already had an image of the system for Windows 7 which was removed before the backup attempt. Here are 2 messages I received as the backup failed. The other 2 were much the same, I think.

  "There was a failure in the preparation of the backup image of any of the volumes in the backup set. (0X807800C).
  The mounted backup volume is inaccessible. Try the operation again. (0X8078004F)."

  "There was a failure in the preparation of the backup image of any of the volumes in the backup set. (0X807800C).
  The specified drive is not found. (0 X 80780081)"

  Below are the 2 files on the external hard drive after the failure. I guess that the first was the complete recovery Partition backup. I don't know much about this sort of thing.

  7da23344-ab79-11e1-887d-806e6f6e6963.vhdx - 7.61 GB
  7da23345-ab79-11e1-887d-806e6f6e6963.vhdx - 7.00 MB

  Anyone have any ideas on the problem? The software only virus on the PC is Windows Defender that came with the operating system.

  Fifth time is a charm, I suppose. I tried saving image system for the fifth time and successfully completed this time. Nothing has changed on my system or readers.

• need a new file system for C:\WINDOWS\system32\drivers\cdrom.sys

  Try to get a file cdrom.sys for my windows xp home edition... My current file has a virus and I need to replace my cd rom drive does not work. I wonder if microsoft has a place I can download the system files on the web? Thank you

  Hello

  I suggest that you follow the steps in this article and check if the problem persists.

  http://support.Microsoft.com/default.aspx?scid=kb;en-us;314060

• Type of file system for Windows 7

  Separated from this thread.

  Buth that I take for windows 7 ultimate fat 32 or ntfs

  NTFS is the file system recommended for Windows and hard disks be used with Windows. It is more stable and more secure than FAT32. In addition, FAT32 has some limitations like maximum file size should be 4 GB only, not supported (EFS) encryption, etc..

  More information can be found in the link below:

  http://Windows.Microsoft.com/en-us/Windows-Vista/comparing-NTFS-and-FAT-file-systems

• What is the path of file system for javascript files?

  We want to keep our javascripts under version control using SVN.  SVN has features to do this, but they are all accessible from the file system location where the files are stored.  So where is it?  When the external editor is used, the file is copied to the Temp directory under the logged in user, but as soon as you close the editor, the file is deleted, so this isn't really an appropriate place for SVN connection.

  Thank you!

  You can get this path as well using the same method, by replacing "javascript".

  with "sequences".

• Confusion with the file system OCFS2 OCR and voting disk RHEL 5, Oracle11g,

  Hi all
  
  I am trying to install the Oracle 11 g 3 node RAC database
  
  The environment on which I must make this implementation is as follows:
  Oracle 11g.
  Red Hat Linux 5 x 86
  Oracle Clusterware
  ASM
  Storage EMC
  250 GB of disk storage.
  SAN
  
  From now on, I am installing Oracle Clusterware on 3 nodes.
  
  I performed these tasks for cluster installations.
  
  1 configure the kernel parameters
  2 configure the user limits
  3 edit the /etc/pam.d/login file
  4 set up the groups and users to the operating system for Oracle Clusterware
  5. configure the environment Clusterware Oracle owner
  6. install the rpm CVUQDISK package
  7 configure the Hosts file
  8. check the network configuration
  9 configure SSH on all the Cluster nodes (equivalence of the user)
  9 enable SSH on all the Cluster nodes (equivalence of the user)
  10 installing Oracle Cluster File System (OCFS2)
  11. check the Installation of the (OCFS2) Oracle Cluster file system
  12 set the OCFS2 (/ etc/ocfs2/cluster.conf)
  13 set up the stack of Cluster O2CB for OCFS2
  
  BUT, here again the after that I'm a little confused on how to proceed. The next step is to format the disk and mount the OCFS2, directories of software... so, create etc.
  I asked my administration system to provide me with two partitions so that I could get in shape with the OCFS2 file system.
  
  He wrote telling me.
  
  * "Is what you want before I do it?" *
  
  * / dev/emcpowera1 is 3 GB and OCFS2.* format
  * / dev/emcpowera2 is 3 GB and OCFS2.* format
  
  * Those who are big enough for you? If not, I can re-size and re - format the *.
  * before I climb on the servers.*
  * the SAN is shared storage. / dev/emcpowera is one of the three LUNS on *.
  * storage is shared, and it is 214 GB. At the moment there are only two *.
  * partitions on it - the ones I have listed below. Can I repartition the LUN everything *.
  * as you want it.*
  * Where do you want that these climbs to: *.
  
  * / dev/emcpowera1 *.
  * / dev/emcpowera2 *.
  
  * I thought if this mounting technique would work as follows: *.
  
  * emcpowera1: / u01/shared_config/OCR_config *.
  * emcpowera2: / u01/shared_config/voting_disk *.
  
  * Let me know how you would like that mounted. » *
  
  Please recommend me what I should pass so that I can ask him exactly the same.
  
  My second question is, as we use the DSO, for which I'm going to configure ASM after clusterware installation, do I install Openfiler?
  PLS, check the environmental information that I provided above and make recommendations.
  
  As of now, I am using Jeffery hunters guide to install the entire installation. You think the installation guide everything is fine with my environment?
  http://www.Oracle.com/technology/pub/articles/hunter_rac11gr1_iscsi.html?rssid=rss_otn_articles
  
  Kind regards
  MK

  Hello Lawrence,.

  Thank you.

  Mark this question as answered.

  See you soon,.

  Rodrigo Mufalani
  http://mufalani.blogspot.com

• where are bookmarks in files system for Firefox. I want to transferred bookmarks from one laptop to another.

  I would like to transre my favorites from one laptop to another life a flash drive. Can I do this with Firefox? If so where is the firefox, file system where the bookmarks are kept? Thank you

  Restore bookmarks from a backup or move them to another computer help? It may be a simpler solution that actually located the file Firefox stores bookmarks in.

  Firefox stores bookmarks in the places.sqlite file in the profile folder.

• What is the correct format for a single. File ALX for pre and Post 5.0?

  Hello

  We have an application which works fine on the pre 5.0 BlackBerry OS.  We have one ALX file that uses the _blackberryVersion designation to determine what COD files must be installed to which devices.  We do this because we build separate sets based on the device, for example, the version of the storm is more optimized for the storm devices.  It was all working well, but with the release of BlackBerry OS 5.0 OS versions seem to have changed.  Previously, the storm was 4.7.0.x and when the tour came out it was 4.7.1.x.  Now, however, so the Bold 9700 and Storm 2 are the two 5.0.0.x to the less based on the OS versions for the two simulators available right now.  It is therefore impossible to use the name of _blackberryVersion in the ALX file, at least for us, since we have different files COD for the storm, with touchscreen and other devices without touchscreen.

  So, I try to understand what the appropriate method for the use of a single file ALX is in this case.  From what I can tell the _blackberryVersion element uses only the three first sections of the version, for example 4.7.0 or 5.0.0 so even trying to make it more specific would not work and would also not practice for all minor versions that will be potentially different carriers.

  I did try to use the name of the series, for example , and even that would not work.  I also tried with 9500 | 9530 | 9550 and always had an error in the Application Loader saying there is no compatible software.  At first I thought it was due to some sections of with _blackberryVersion and then some with the series.  But I tried a new ALX file with just the designation of series and still no luck.

  Has anyone found how to do this properly yet?  Are there examples of ALX files which series =? Someone at - it examples of work from ALX files that use the _blackberryVersion and the series?

  Before everyone jumps on me, I'm not the real Director of enforcement, I only update the ALX file.  So I don't think it's possible to have a single file of COD to build, but at that time, that never would have happened so I need to find the best solution with different files of COD, that shouldn't be a problem because she supported and described in the documentation.

  If I need to display the ALX file please let me know.

  Kind regards

  David Dewaele, Jr.

  The correct series attribute for 9500 is "Thunder".

  You can find that where she attributes to all here-(for normal installations)

  C:\Program Files\Common Motion\AppLoader\Device.xml search

• Access for interal AND external users through a single login server?

  Hey,.

  Apart from redundancy, it is possible to have a single connection server that allows internal users AND external access virtual resources?

  For external access, I have associated my login server security server. It works perfectly if I activate the PCoIP Secure Gateway option on my server of connection and enter the public IP address of the Security server.

  But with this configuration internal users are not able to connect (listing the works of resources, but the connection fails).

  If I disable the PCoIP Secure Gateway option, internal users can access, but not external users via the Security server.

  Any contribution is appreciated.

  Thank you very much!

  No, it's the only way you can do it for internal users and external to share the same login server - activation of the MTP setting is by CS. If you want to PSG on for external users (and it is practically a necessity unless you use a third-party VPN), but offshore for internal users, they will point to the servers of different connection and so you'll need two.

• Best file format for Illustrator and PS files be placed in the ID

  I am writing a proposal using InDesign. It will output to PDF format for circulation among members of the team; I guess they will be view on a variety of screens and some will be to print on various desktop printers.

  I have a variety of images, all in color, in InDesign, Photoshop, and Illustrator to be included in the proposal. Varies from 5 x 7 to 2 x 2. Some are quite complex with fine detail.

  I just saw the proposal in preview overprinting ID / high quality display. The images don't look great. A lot of jagged lines.

  I usually save all in JPEG format with a quality of 80-90... but it's just a habit, I have no reason or justification for this practice.

  I wonder if I should go back to the original files of ID, PS and and save it back as something else before and then place them again.

  Does anyone have recommendations or thoughts to offer?

  I use CS4 on Mac. My computer is a little underpowered for the project at hand, but I'm willing to put up with a bit of slow performance and lag if it translates into a better final product.

  Irregular line is a feature of low resolution, no type of file or an overview screen lower quality than you think that you are using. Check the display performance settings again to make sure they are really good, and if they are configured to allow object level settings, you will need to make sure that each object is also correctly.

  Beond that record in .jpeg format is always destructive. For the web, it's nice, but for printing, you should never use anything, in my opinion, but the quality parameters for registration of JPEG files, and I recommend using jpeg at all. If your picture is that all raster data (pixels) Save .psd or .tif. If she has live type or any other vector content, save it as a Photoshop PDF. In Illustrator to save as .ai or PDF with Illustrator editing capability. If you change the extension of the files PDF Photoshop PDP they open in Photoshop rather than Acrobat when you use Edit Original.

  As I said, the effects of stairs are a feature of low resolution. We often have people tell us that the file is 300 dpi, but it turns out that it is a very small dimension and the imaga is furred in ID. Both links and information signs can show you the information of resolution of your images. There will be two numbers, real and effective. Effective resolution is the only number that is important. I would like to see a minimum of 150 dpi for printing on a desktop printer, but you could get away with as little as 90 for a non-critical image. Press 300 ppi would be the rule, and a fall below 200 asking trouble.

  How the file looks like ID is not nearly as informative as how a PDF file that was exported in the file looks like, or prints. For a high image resolution in the ID you are still looking at an overview of screen resolution lower, not the actual image, because she will be out. Export settings that downsample too far or apply too much compression to reduce file size also can turn a good document in an old piece of junk.

• How to find sizes backupset for full and incremental backups

  How can I get the exact sizes of backupsets, full and incremental backups RMAN? In addition, it would be nice to separate the backupset size in data and archiving logs files.

  Don't know exactly what you can include in your output, but the following is an example:

  SQL> select ctime "Date"
    2       , decode(backup_type, 'L', 'Archive Log', 'D', 'Full', 'Incremental') backup_type
    3       , bsize "Size MB"
    4  from (select trunc(bp.completion_time) ctime
    5          , backup_type
    6          , round(sum(bp.bytes/1024/1024),2) bsize
    7     from v$backup_set bs, v$backup_piece bp
    8     where bs.set_stamp = bp.set_stamp
    9     and bs.set_count  = bp.set_count
   10     and bp.status = 'A'
   11     group by trunc(bp.completion_time), backup_type)
   12  order by 1, 2;
  
  Date      BACKUP_TYPE    Size MB
  --------- ----------- ----------
  03-JUL-10 Archive Log       7.31
  03-JUL-10 Full             29.81
  03-JUL-10 Incremental    2853.85
  04-JUL-10 Archive Log       3.59
  04-JUL-10 Full              7.45
  04-JUL-10 Incremental       3.05
  
  6 rows selected.