Give links to dynamically created MC

Similar Questions

• Time of design and of the dynamically created controls

  I have a project written in VC6 as a project of the MFC dialog box. In a particular area, I dynamically create several (the exact number depends on user input) CNiGraphs. There is also a two CNiButtons that were created at design time using the resource editor. The problem I have is that when this dialog box is open, a message appears saying it is an eval version and the control will go off after 5 minutes. After 5 minutes of waiting, the CNiButtons 2 go inactive (black tower), but the continuous CNiGraphs of work. I have a valid license of MStudio 8.1.6, version but it seems that these 2 buttons do not recognize the license. There are also other buttons from the moment of conception of the project, but these have no problem at all. When you create the dynamic creation of the CNiGraphs, give them a valid license string, and I was wondering if there is a problem with the time created and dynamically controls created in the same dialog box to design. Anyone know?

  I don't remember, but I can have created these 2 CNiButtons when I was with only an eval license. (All others were undoubtedly create when I got a full license) Could have an impact on them? I have a vague memory of reading somewhere that DTC create controls to check the license when they are created in the designer and store that info in them license. If this is the case does anyone know an easy way to update the license stored in control? I rather not just delete it and Add again because I would avoid having to redo the tab order (unless someone knows how to easily insert something in the middle of the order of tab instead of having to click through all the controls in the correct order)?

  In addition, I don't know if this would affect anything, but the project was originally built with ComponentWorks 1.0, we were forced to move to MStudio when we met a few bugs in CW, so all controls were originally CW controls which have been converted into control of CNi. I doubt that this is so like everywhere else, we changed during controls is not a problem, but I'm ready to try the suggestions.

  Hi JC,.

  I hope you had a good weekend!  I'm glad to hear that you're back running.  Add the extra button was, in fact, causing update the licensing information for the other buttons, as you can imagine.  After further research, I found that the license information are stored only the form of the control, and if this control doesn't change in any way (or in your case, adding a new project), he sees no reason when compiling to recreate a link to the license.  However, after the change of control and a new, it updates the link between the license information, which solved this problem in your case.

  I hope this helps, JC.  Have a great day!

• Get the ID of a dynamically created symbol library, inside another symbol.

  Hello world

  I'm trying to get the id of a dynamic created symbol library.

  When you dynamically create the symbol directly on the stage (or the level of the composition), there is no problem.

  But I can not function when you create the symbol inside another symbol.

  A few examples using 'getChildSymbols()' and 'aSymbolInstances '.

  // USING "getChildSymbols()" /////////////////////////////////////////////////////////////////////////

  ON THE STAGE

  var m_item = sym.createChildSymbol ("m_item", "Stage");

  var symbolChildren = sym.getChildSymbols ();

  console.log (symbolChildren [0] .getSymbolElement () .attr ('id')); / / ok eid_1391853893203

  / / Inside a SYMBOL OTHER

  var m_item = sym.createChildSymbol ("m_item", sym.getSymbol("holder").getSymbolElement ());

  var symbolChildren = sym.getSymbol("holder").getChildSymbols (); / / I use this maybe wrong?

  console.log (symbolChildren.Length) / / returns 0 if can't ID is

  ' USE 'aSymbolInstances "".

  ON THE STAGE

  var m_item = sym.createChildSymbol ("m_item", "Stage");

  console.log(sym.aSymbolInstances[0]); / / ok (I guess) x.fn.x.init [1] 0: #eid_1391854141436 div

  / / Inside a SYMBOL OTHER

  var m_item = sym.createChildSymbol ("m_item", sym.getSymbol("holder").getSymbolElement ());

  console.log (sym.getSymbol("holder").aSymbolInstances [0]); / / Error Javascript in the event handler. Type of event = element

  In this post http://forums.Adobe.com/message/5691824 is written: "mySym.aSymbolInstances will give you a table containing all the 'names' when you create symbols"

  Would be - this only works on the scene / composition level only and not inside a symbol?

  The following methods to obtain the same are indeed possible, but I do not simply want to use them in this case:

  (1) storing a reference to the symbol created in a table and call it later by index.

  (2) giving the elements an ID manually on the creation and use of document.getElementById () thereafter.

  I can't believe that this is not possible. I am probably missing something here.

  Forgive me that I am a newbie using Adobe Edge!
  I really hope that someone can help me here.

  Anyway, thnx in advance people!

  Kind regards

  Lester.

  OK, I solved my problem by using the (simple) code below.
  I guess that 'getChildSymbols()' and 'aSymbolInstances' only works on stage / level of the composition.

  Just thought I'd share this to everyone. Peace!

  var m_item = sym.createChildSymbol ("m_item", sym.getSymbol("holder").getSymbolElement ());

  $.each (sym.$("holder").children (), function (index, obj) {}

  Console.log ($(sym.$("holder").) ([Index] Children()) .attr ('id'));

  });

• How to reference a dynamically created MovieClip from an another MovieClip?

  Hello

  I would be grateful for the pointers to the following problem:

  I can't reference dynamically created MovieClips (links in a panel side on a Flash site, created from a XML file) from the current MovieClip (the selected link).

  I want to freeze the MovieClip/link to the mouseOver State, once it has been clicked - this part works. When a new MovieClip/link is clicked on, I would like to release the previously clicked on the link to the mouseOver State, which is what I have so far been unable to do.

  My problem seems to refer to the previous link/MoveClip. I used the statement (MovieClip (this) .name) route trace to determine that the clips are named item0, item1, item2 and so on. However, I was unable so far to reference the previous item so far. I tried to follow the route to the MovieClip on the stage and also essaye.item0.gotoandstop MovieClip (parent) and a lot of other different permutations, but nothing helped. It's the fact that they seem to be in a container called "panel", which is defeat me.

  Here's a live version that I downloaded, what could explain the problem better. Click on "UBER EACH" in the menu bar to access the page in question. It is the links on the left side (history, team Unser, etc.) who are the problem. You will see that once they were clicked, they stay in their mouseOver State.

  This is the code in question on the fla file, which is a file that I did not create myself. The parts in black work very well; It's the Red pieces there the rub:

  ***********************************

  import flash.display.MovieClip;

  panel.buttonMode = true;

  var: lang: uint = 1;

  var url_Link:String = MovieClip (root).program.websiteXML .language [lang] [MovieClip (root).program.linkPage].pages.titlePage.texts.pageList.txt [XT].@link numT;

  var urlPage:Number = number (MovieClip (root).program.webs iteXML.language [lang].pages.titlePage [MovieClip (root).program.linkPage].texts.pageList.tx t[numTXT].@linkPage);

  var request: URLRequest;

  var linkIndex:uint;

  var lastClickedLink:MovieClip; //This is supposed to store the last link that has been clicked - it does not work  

  panel.addEventListener (MouseEvent.CLICK, clicLink);

  panel.addEventListener (MouseEvent.ROLL_OVER, mouseOverLink);

  panel.addEventListener (MouseEvent.ROLL_OUT, mouseOutLink);

  function mouseOverLink(event:MouseEvent):void {}

  MovieClip (this) .gotoAndPlay ('s1');

  }

  function mouseOutLink(event:MouseEvent):void {}

  if(numTXT!== (linkIndex-1)/5) { State mouseOver of //freezes so this is the link for the current page

  MovieClip (this) .gotoAndPlay ('s2');

  }

  }

  function clicLink(event:MouseEvent):void {}

  var linkpage:uint =. MovieClip program.linkPage (root);

  If {(url_Link)

  request = new URLRequest (url_Link);

  navigateToURL (request);

  } else {}

  linkIndex = numTXT * 5 + 1;

  if(linkpage == 1) {}

  MovieClip (root).chPages.cont.page_about_mc.page3Tu rner_mc.gotoAndStop ([linkIndex]);

  } ElseIf (linkpage == 2) {}

  MovieClip (root).chPages.cont.page3_mc.page3Turner_ mc.gotoAndStop ([linkIndex]);

  }

  lastClickedLink.gotoAndPlay('s2'); / / This is supposed to release the clicked the link previous it is State mouseOver - does not work 

  lastClickedLink = MovieClip (this) .name; //this is supposed to set the new link as the last link clicked after that was released of her is State mouseOver - does not work   

  }

  }

  ***********************************

  If anyone can help, that would be great.

  What you might be after for this line is to use:

  lastClickedLink = MovieClip (event.currentTarget);

  For what you show, the name property of an object is a string, so I expect get you an error regarding trying to get a string to act as a MovieClip when you try to say to gotoAndPlay ('s2').

• Dynamically create (and reference) dialog groups

  I am installing a dialog window that can be easily added to via a CSV file.  The only problem I encountered is; I'm not sure how to create groups dynamically.  Basically, script upward configurations a bunch of texture features and then gives the possibility to save or delete this feature.  Here's the basic idea of what I'm trying to do, but the groups are not able to be created in the way that they are presented:

  featArray = [];
  featArray[0] = new Array("Feature Display Name","feature sub-group",'texture',"feature action",'feature type');
  featArray[1] = new Array("Feature2 Display Name","feature2 sub-group",'texture',"feature2 action",'feature2 type'); //etc.
  
  for(var z in featArray) {
      if(featArray[z][2] == 'texture') {
          w.p1.sp1.add('statictext',undefined,featArray[z][0]);
          w.p1.sp1.g[z] = w.p1.sp1.add('group');
          w.p1.sp1.g[z].orientation = 'row';
          w.p1.sp1.g[z].add('checkbox',undefined,'Save');
          w.p1.sp1.g[z].add('checkbox',undefined,'Strip');
          w.p1.sp1.g[z].children[0].id = featArray[z][0].toLowerCase() + "-save";
          w.p1.sp1.g[z].children[1].id = featArray[z][0].toLowerCase() + "-strip";
      }
  }
  

  If you change the [z] g in g1, it will create each field correctly (visually), but has no way to good reference check boxes to see which are checked.  Any ideas how, or even if, it is possible to dynamically create a different group for each line of the featArray?  And if so, how then referencing the boxes in these groups later?  Thanks in advance for any help!

  You must store the locations in a table IE: -.

  featArray = [];
  featArray[0] = new Array("Feature Display Name","feature sub-group",'texture','feature group','feature type');
  featArray[1] = new Array("Feature Display Name2","feature sub-group2",'texture','feature group2','feature type2'); //etc.
  var w = new Window('dialog','test');
  w.p1= w.add("panel", undefined, undefined, {borderStyle:"black"});
  var x = new Array();
  var count =0;
  for(var z in featArray) {
      if(featArray[z][2] == 'texture') {
          w.p1.add('statictext',undefined,featArray[z][0]);
  w.p1.g = w.p1.add('group');
  w.p1.g.orientation = 'row';
  x[count] = w.p1.g.add('checkbox',undefined,'Save');
  count++;
  x[count] = w.p1.g.add('checkbox',undefined,'Strip');
  count++
      }
  }
  w.test = w.add('button',undefined,'Press to Test');
  w.add('button',undefined,'Cancel');
  w.test.onClick=function(){
  for(var w =0;w 
             
   
  		     
  Add a dynamically created checkbox in DataGrid
   
  			 
   Rquirement: Add a dynamically created checkbox in the first column of a dynamically created a DataGrid  .
  Note: The dataprovider of the DataGrid is a collectible arraycollection, which is populated by tables in the database. Therefore, whenever the DataGrid columns can varry depents on the table.
  			 
  The code below would work for you. Please give it a try.
  Import mx.controls.dataGridClasses.DataGridColumn;
  Import mx.collections.ArrayCollection;
  
                     
  Import mx.controls.DataGrid;
  Import mx.controls.CheckBox;
  
                     
  [Bindable]
  private var dtGrid:DataGrid;
  [Bindable]
  private var chkBox:CheckBox;
  
                     
  [Bindable]
  private var peeps: ArrayCollection collection;
  
                     
  
                      
  
                     
  private function init (): void
  {
  friends = new ArrayCollection();
  peeps.addItem ({firstName: "Beautiful", lastName: "Dude", age: 24 gender: "male"});
  peeps.addItem ({firstName: "Red", lastName: "Dude", age: 25 gender: "male"});
  peeps.addItem ({firstName: "Top", lastName: "Guy" of the age: 25 gender: "male"});
  peeps.addItem ({firstName: "Cute", lastName: "Girl", age: 24, sex: "female"});
  peeps.addItem ({firstName: lastName "to"hot,":"Chick", age: 24, sex:"female"});
  peeps.addItem ({firstName: lastName "Lazy",: "The man", age: 25 gender: "male"});
  
                            
  var dataGridColumn:DataGridColumn = new DataGridColumn("");
  dataGridColumn.itemRenderer = new ClassFactory (CheckBox);
  
                    
  dtGrid = new DataGrid();
  dtGrid.dataProvider = friends;
  this.addElement (dtGrid);
  
                            
  var tempColArray:Array = new Array();
  tempColArray [0] = dataGridColumn;
  for (var i: int = 0; dtGrid.columns.length > i; ++ i)
  {
  tempColArray [i + 1] = dtGrid.columns [i];
  }
  
                            
  dtGrid.columns = tempColArray;
  dtGrid.invalidateDisplayList ();
  }
  ]]>
  		   
   
              
             
   
  		     
  The number of dynamically created button
   
  			 Recently, I started to give my button dynamically shares. I did something like this:
  
  
  for (var i: Number = 0; i < inches; i ++) {}
  thumb_scroller.all_thumbs ["Thumb" + i].bdr._alpha = 0;
  var ref: MovieClip = thumb_scroller.all_thumbs ["thumb" + i];
  ref.onRollOver = function (): Void {}
  btnRollOver (this, btnFadeTime1);
  }
  ref.onRollOut = function (): Void {}
  btnRollOff (this, btnFadeTime1);
  }
  ref.onRelease = function (): Void {}
  clickAction();
  resetThumbBtns (this);
  }
  };
  
  
  I now have a table filled from an xml document. Each when you click on the button should display its corresponding string for this table. For example, when I click on the button 5 I want to show a string five of myArray. This will go in the clickAction function. I don't know how to do, is to give each button that number just in itself so I can call to the table. I tried clickAction (i); but obviously I have is updated and is then a number and not a different one for each button.
  
  
  How can I do this? I know I could do with an ifStatement, but it would create tons of code, it is has 50 buttons.
  
  
  Thanks a lot for any help with this.			 
  you could do an it in one could ways, either by using the name of the button as the id, i.e. If all buttons are referred to as "btn1", "btn2"... etc then just use substr on the name property to strip the "btn" and analyze the remains to the number of characters.
  Or the fastest way would be to just incorporate a variable to each button in the loop of storage to the value of i
  i.e.
  for (var i: Number = 0; i< thumbs;="">
  thumb_scroller.all_thumbs ["Thumb" + i].bdr._alpha = 0;
  var ref: MovieClip = thumb_scroller.all_thumbs ["thumb" + i];
  store the variable inside the button
  ref.iNum = I have
  ref.onRollOver = function (): Void {}
  btnRollOver (this, btnFadeTime1);
  }
  ref.onRollOut = function (): Void {}
  btnRollOff (this, btnFadeTime1);
  }
  ref.onRelease = function (): Void {}
  Use this.iNum to reference the stored variable inside of the / Ref
  trace (this.inum);
  Then go this.iNum, wherever you like
  clickAction (this.iNum);
  resetThumbBtns (this);
  }
  };
  		   
   
              
             
   
  		     
  When dynamically created variables are emptied in the sequential process template?
   
  			 
  I have a sequence TestStand 2014 in which I dynamically create and fill many FileGlobal variables in the installation section of my main sequence.  I have it using the TestStand API to read the data in an Excel file (the data consists mainly of thresholds, limits, etc.).  The methodology itself works flawlessy.
  However, there are differences in behavior when using entry points both execution of the sequential process model.  When you use the entry point of execution 'Single Pass', he has no problem in test a DUT after another.  However, when you use the entry point for execution "Test DUT", I encounter the following error after completing of DUT1 and DUT2 testing:
  An error occurred the call 'InsertSubProperty' in 'PropertyObject' of 'NI TestStand 2014 API.
  The name of the element "VariableName" is not valid because it is already in use.
  I interpret this error message means that the variable I am trying to dynamically create the DUT2 track is already present race of DUT1.  I have a few questions about this:
  1. at what point in the sequential process template are dynamically created variables flushed, such as run a further by using 'Single Pass' starts with a clean slate?
  2. is there a reminder that I can substitute such as variables to rinse after each HAD run, allowing me to dynamically create variables on each HAD, during execution using "Test UUT?
  3. better yet, is there a counter of TestStand I can query to determine if I already ran DUT1 when using "Test DUT", such as DUT2 uses the variables that were created dynamically on trail of DUT1?
  			 
  Or you can simply use the PropertyExists function as a precondition.
  PropertyExists ("Locals.Foo")
  		   
   
              
             
   
  		     
  How to dynamically create variables of StationGlobals who are LabVIEWIOControl
   
  			 
  I'm looking for a way to dynamically create variables StationGlobals LabVIEWIOControl.  I know not how to create variables through "PropertyObject/SetValXXX", however I have some difficualty create variables that are custom data types.
  Thank you
  Bryon
  			 
  Bryon,
  You can use an expression as follows:
  StationGlobals.NewSubProperty("MyVariable",PropValType_NamedType,False,"LabVIEWIOControl",0)
  I hope this helps!
  		   
   
              
             
   
  		     
  dynamically create and destroy the custom menu item
   
  			 
  I have a standard TestStand platform that I use on multiple systems.  On some systems, I have a few sequences of calibration and I would like to have the Update menu to have the RunSequence of these sequences of calibration.  I know how to manually create these menu items, but they are no longer valid for some sequence files.  I would use the sequence SequenceFileLoad to dynamically create menu items and the SequenceFileUnload to destroy these menu items.
  I've played around with the API, but cannot determine the correct path to get to the create and destroy the custom menu items.  Does anyone know how this can be done?
  Thank you
  Matthew
  			 
  Yes, see the online help for the members of the following APIs:
  Engine.GetEditTimeToolMenuItems
  EditTimeMenuItems
  EditTimeMenuItem
  Basically, you get a collection of tool using Engine.GetEditTimeToolMenuItems () menu items and then call EditTimeMenuItems.Insert () or EditTimeMenuItems.Remove (). If you insert a you get returns an EditTimeMenuItem object on which you can change the settings.
  In addition, since it has an expression to hide items in menu tool, you need not necessarily to destroy, you can hide them instead.
  Hope this helps,
  -Doug
  		   
   
              
             
   
  		     
  How to link to pages created by web expressions 4?
   
  			 
  Original title: Web links.
  How to link to pages created by web expressions 4?
  			 
  Hi mmuribi,
  You can follow these links and check if it helps.
  http://expression.Microsoft.com/en-us/ee662149.aspx
  http://www.Microsoft.com/expression/News-Press/newsletter/2007-10/Article04.aspx
  Hope the helps of information.
  Please post back and we do know.
  		   
   
              
             
   
  		     
  How to dynamically create action item?
   
  			 
  Hi, I want to dynamically create point.
  Before I want to create using qml, but does not seem possible
  http://supportforums.BlackBerry.com/T5/Cascades-development/how-to-create-action-item-of-page-dynami...
  So maybe better to use C++ to create dynamically,
  I'm already try but are still not
  So I have a custom control qml (a Navigation pane)
  name List.qml
  the structure is like this:
  NavigationPane {}
  {Page}
  objectName: myPage
  {Of container
  ....
  }
  }
  }
  How to add action item to this .qml?
  I'm already try that, but failed
  C++ :
  Engine QDeclarativeEngine;
  QDeclarativeComponent component(&engine,QUrl::fromLocalFile("List.qml"));)
  QObject * object = component.create ();
  Page * myPage = object->findChild ("Edit");  Maybe, on that note, I'm wrong implemented? -> not found?
  
  ActionItem * action1 = ActionItem::create () .title ("first action");
  my page-> addAction (action1, ActionBarPlacement:nBar);
  Remove the object;
  How to create this dynamic Action item?
  Help, please
  Thank you
  			 
  Hello
  QML, the object name must be included between "" marks.
  Name of the object of your Page will be:
  objectName: "myPage"
  
  You can reach any CPP QML object like this:
  This excerpt comes from YourProjectName.cpp
  // create scene document from main.qml asset
  // set parent to created document to ensure it exists for the whole
  // application lifetime
  
  QmlDocument *qml = QmlDocument::create("asset:///main.qml").parent(this);
  
      // create root object for the UI
      AbstractPane *root = qml->createRootObject();
      // set created root object as a scene
      app->setScene(root);
  
  //and here comes the findChild method
  Page* qmlPage = root->findChild("myPage");
  
  After this, you can create any object on the side of C++ QML, as your own code:
  ActionItem* action1 = ActionItem::create().title("First action");
  myPage->addAction(action1, ActionBarPlacement:nBar);
  
  Don't have no need to create a QObejct, or declarative stuff.
  		   
   
              
             
   
  		     
  Dynamically create QmlComponentDefinition objects in the code
   
  			 
  With QML sample:
  // --- main.qml ---Container {    objectName: "fooContainer"    attachedObjects: [        ComponentDefinition {            id: barComponent            source: "Bar.qml"        }    ]}
  
  // --- Bar.qml ---Container {    objectName: "bar"    Label {        text: "FooBar"    }}
  
  I am trying to dynamically create barComponent objects and add them to fooContainer in C++ code.
  So I reference the using fooContainer:
  fooContainer = createdRootObject->findChild("fooContainer");
  
  But how to reference the definition of QML barComponent to use his method createObject()?
  			 
  The definition of the element is used to create the object of QML
  To create the C++ object, you need to do:
  qml = QmlDocument::create("asset:///Bar.qml");
  Control *root =  qml->createRootObject();
  fooContainer->add(root)
  		   
   
              
             
   
  		     
  Handling dynamically created components qml in C++
   
  			 
  Hey,.
  I dynamically create a qml page by using the following code:
                  onClicked: {
                      var favPage = favPageDef.createObject();
                      nav.push(favPage);
                  }
                  attachedObjects: ComponentDefinition {
                      id: favPageDef
                      source: "FavPage.qml"
                  }
  
  I would now like to manipulate the components in this new page qml in c ++. How to access these components?
  I was able to access the qml components fairly easily if they were created during the initialization of the application, but of course, this isn't the case.
  			 
  I discovered what the problem was. I had to do my public AbsractPane in my header file. Then when I created the qml component and calls a function in c ++ it turns out to be a child. Thanks for everyone help well.
  		   
   
              
             
   
  		     
  You can link two dynamic text objects?
   
  			 
  This is a question about dynamic text objects.  Is it possible to link two dynamic text objects so that they flow together into an email or a landing page?
  For example, say you have two dynamic text objects, DTO1 and DTO2.  Also assume that DTO1 can vary in length, for example, two lines of five lines.  Is it possible to establish that DTO2 runs immediately after DTO1 to say, a single line of space empty between them?  I see no way to do it in email or the landing page editor, but perhaps that there's a way to do it with html or another approach.
  Thank you
  Andy
  			 
  Hi Andy,.
  Yes, to do this with html raw. Once you have the code, you can either put in the view of the source of a text box (if you use the Eloqua editor) or just throw in some test-tube html.
  First of all, you need get the HTML for your dynamic elements. It's kind of awkward to get this code but not too difficult.
  Open a downloaded landing page or sent e-mail. You can not access the landing pages or emails that have been built using the Eloqua editor code.
  Display dynamic content browser and search for your dynamic elements
  Drag them into the section code of your destination or by e-mail page
  Copy the code that gets placed there then the output of the page destination or email without saving changes
  The code should look like this:
  It is a piece of sample code for an element of dynamic content
  Now, when you build your email or a landing page which will contain both of these two elements of dynamic content just sticking two snippets in there and separate with a line break)
  
  ) to get the bit of empty space. As I've mentioned above, you can place code in the view of the source of a text box (if you use the Eloqua editor) or just throw in some test-tube html.
  In fact, if your final product should be a page external destination loaded or email you could save yourself the time and code just in a place-holder when you generate your html code. Then when you're done uploading, please drag the dynamic elements in the code of the dynamic browser and add your line breaks.
  The final code should look like this:
  It is a piece of sample code for an element of dynamic content
  
  
  
  This is another sample of code for an element of dynamic content